* Re: [PATCH 22/22] docs: fix broken documentation links
[not found] ` <1574052.9PXfBvmXpz@harkonnen>
@ 2019-05-30 22:49 ` Michael S. Tsirkin
0 siblings, 0 replies; 6+ messages in thread
From: Michael S. Tsirkin @ 2019-05-30 22:49 UTC (permalink / raw)
To: Federico Vaga
Cc: kvm, Linux Doc Mailing List, linux-pci, platform-driver-x86,
linux-mm, linux-i2c, linux-kselftest, devel, x86, linux-acpi,
xen-devel, linux-edac, devicetree, linux-arm-msm, linux-gpio,
linux-amlogic, virtualization, linux-arm-kernel, devel, netdev,
linux-kernel, linux-security-module, linuxppc-dev
On Thu, May 30, 2019 at 10:17:32PM +0200, Federico Vaga wrote:
> On Thursday, May 30, 2019 1:23:53 AM CEST Mauro Carvalho Chehab wrote:
> > Mostly due to x86 and acpi conversion, several documentation
> > links are still pointing to the old file. Fix them.
>
> For the Italian documentation I just send I patch to fix them in a dedicated
> patch
Acked-by: Michael S. Tsirkin <mst@redhat.com>
for the vhost change.
> >
> > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> > ---
> > Documentation/acpi/dsd/leds.txt | 2 +-
> > Documentation/admin-guide/kernel-parameters.rst | 6 +++---
> > Documentation/admin-guide/kernel-parameters.txt | 16 ++++++++--------
> > Documentation/admin-guide/ras.rst | 2 +-
> > .../devicetree/bindings/net/fsl-enetc.txt | 7 +++----
> > .../bindings/pci/amlogic,meson-pcie.txt | 2 +-
> > .../bindings/regulator/qcom,rpmh-regulator.txt | 2 +-
> > Documentation/devicetree/booting-without-of.txt | 2 +-
> > Documentation/driver-api/gpio/board.rst | 2 +-
> > Documentation/driver-api/gpio/consumer.rst | 2 +-
> > .../firmware-guide/acpi/enumeration.rst | 2 +-
> > .../firmware-guide/acpi/method-tracing.rst | 2 +-
> > Documentation/i2c/instantiating-devices | 2 +-
> > Documentation/sysctl/kernel.txt | 4 ++--
> > .../translations/it_IT/process/howto.rst | 2 +-
> > .../it_IT/process/stable-kernel-rules.rst | 4 ++--
> > .../translations/zh_CN/process/4.Coding.rst | 2 +-
> > Documentation/x86/x86_64/5level-paging.rst | 2 +-
> > Documentation/x86/x86_64/boot-options.rst | 4 ++--
> > .../x86/x86_64/fake-numa-for-cpusets.rst | 2 +-
> > MAINTAINERS | 6 +++---
> > arch/arm/Kconfig | 2 +-
> > arch/arm64/kernel/kexec_image.c | 2 +-
> > arch/powerpc/Kconfig | 2 +-
> > arch/x86/Kconfig | 16 ++++++++--------
> > arch/x86/Kconfig.debug | 2 +-
> > arch/x86/boot/header.S | 2 +-
> > arch/x86/entry/entry_64.S | 2 +-
> > arch/x86/include/asm/bootparam_utils.h | 2 +-
> > arch/x86/include/asm/page_64_types.h | 2 +-
> > arch/x86/include/asm/pgtable_64_types.h | 2 +-
> > arch/x86/kernel/cpu/microcode/amd.c | 2 +-
> > arch/x86/kernel/kexec-bzimage64.c | 2 +-
> > arch/x86/kernel/pci-dma.c | 2 +-
> > arch/x86/mm/tlb.c | 2 +-
> > arch/x86/platform/pvh/enlighten.c | 2 +-
> > drivers/acpi/Kconfig | 10 +++++-----
> > drivers/net/ethernet/faraday/ftgmac100.c | 2 +-
> > .../fieldbus/Documentation/fieldbus_dev.txt | 4 ++--
> > drivers/vhost/vhost.c | 2 +-
> > include/acpi/acpi_drivers.h | 2 +-
> > include/linux/fs_context.h | 2 +-
> > include/linux/lsm_hooks.h | 2 +-
> > mm/Kconfig | 2 +-
> > security/Kconfig | 2 +-
> > tools/include/linux/err.h | 2 +-
> > tools/objtool/Documentation/stack-validation.txt | 4 ++--
> > tools/testing/selftests/x86/protection_keys.c | 2 +-
> > 48 files changed, 77 insertions(+), 78 deletions(-)
> >
> > diff --git a/Documentation/acpi/dsd/leds.txt
> > b/Documentation/acpi/dsd/leds.txt index 81a63af42ed2..cc58b1a574c5 100644
> > --- a/Documentation/acpi/dsd/leds.txt
> > +++ b/Documentation/acpi/dsd/leds.txt
> > @@ -96,4 +96,4 @@ where
> >
> > <URL:http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-da
> > ta-extension-UUID-v1.1.pdf>, referenced 2019-02-21.
> >
> > -[7] Documentation/acpi/dsd/data-node-reference.txt
> > +[7] Documentation/firmware-guide/acpi/dsd/data-node-references.rst
> > diff --git a/Documentation/admin-guide/kernel-parameters.rst
> > b/Documentation/admin-guide/kernel-parameters.rst index
> > 0124980dca2d..8d3273e32eb1 100644
> > --- a/Documentation/admin-guide/kernel-parameters.rst
> > +++ b/Documentation/admin-guide/kernel-parameters.rst
> > @@ -167,7 +167,7 @@ parameter is applicable::
> > X86-32 X86-32, aka i386 architecture is enabled.
> > X86-64 X86-64 architecture is enabled.
> > More X86-64 boot options can be found in
> > - Documentation/x86/x86_64/boot-options.txt
> .
> > + Documentation/x86/x86_64/boot-options.rst.
> > X86 Either 32-bit or 64-bit x86 (same as X86-32+X86-64)
> > X86_UV SGI UV support is enabled.
> > XEN Xen support is enabled
> > @@ -181,10 +181,10 @@ In addition, the following text indicates that the
> > option:: Parameters denoted with BOOT are actually interpreted by the boot
> > loader, and have no meaning to the kernel directly.
> > Do not modify the syntax of boot loader parameters without extreme
> > -need or coordination with <Documentation/x86/boot.txt>.
> > +need or coordination with <Documentation/x86/boot.rst>.
> >
> > There are also arch-specific kernel-parameters not documented here.
> > -See for example <Documentation/x86/x86_64/boot-options.txt>.
> > +See for example <Documentation/x86/x86_64/boot-options.rst>.
> >
> > Note that ALL kernel parameters listed below are CASE SENSITIVE, and that
> > a trailing = on the name of any parameter states that that parameter will
> > diff --git a/Documentation/admin-guide/kernel-parameters.txt
> > b/Documentation/admin-guide/kernel-parameters.txt index
> > 138f6664b2e2..4a02d1346635 100644
> > --- a/Documentation/admin-guide/kernel-parameters.txt
> > +++ b/Documentation/admin-guide/kernel-parameters.txt
> > @@ -53,7 +53,7 @@
> > ACPI_DEBUG_PRINT statements, e.g.,
> > ACPI_DEBUG_PRINT((ACPI_DB_INFO, ...
> > The debug_level mask defaults to "info".
> See
> > - Documentation/acpi/debug.txt for more
> information about
> > + Documentation/firmware-guide/acpi/debug.rst
> for more information about
> > debug layers and levels.
> >
> > Enable processor driver info messages:
> > @@ -963,7 +963,7 @@
> > for details.
> >
> > nompx [X86] Disables Intel Memory Protection
> Extensions.
> > - See Documentation/x86/intel_mpx.txt for
> more
> > + See Documentation/x86/intel_mpx.rst for
> more
> > information about the feature.
> >
> > nopku [X86] Disable Memory Protection Keys CPU
> feature found
> > @@ -1189,7 +1189,7 @@
> > that is to be dynamically loaded by Linux.
> If there are
> > multiple variables with the same name but
> with different
> > vendor GUIDs, all of them will be loaded.
> See
> > - Documentation/acpi/ssdt-overlays.txt for
> details.
> > + Documentation/admin-guide/acpi/ssdt-
> overlays.rst for details.
> >
> >
> > eisa_irq_edge= [PARISC,HW]
> > @@ -2383,7 +2383,7 @@
> >
> > mce [X86-32] Machine Check Exception
> >
> > - mce=option [X86-64] See Documentation/x86/x86_64/boot-
> options.txt
> > + mce=option [X86-64] See Documentation/x86/x86_64/boot-
> options.rst
> >
> > md= [HW] RAID subsystems devices and level
> > See Documentation/admin-guide/md.rst.
> > @@ -2439,7 +2439,7 @@
> > set according to the
> > CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE
> kernel config
> > option.
> > - See Documentation/memory-hotplug.txt.
> > + See Documentation/admin-guide/mm/memory-
> hotplug.rst.
> >
> > memmap=exactmap [KNL,X86] Enable setting of an exact
> > E820 memory map, as specified by the user.
> > @@ -2528,7 +2528,7 @@
> > mem_encrypt=on: Activate
> SME
> > mem_encrypt=off: Do not activate SME
> >
> > - Refer to Documentation/x86/amd-memory-
> encryption.txt
> > + Refer to Documentation/virtual/kvm/amd-
> memory-encryption.rst
> > for details on when memory encryption can
> be activated.
> >
> > mem_sleep_default= [SUSPEND] Default system suspend mode:
> > @@ -3528,7 +3528,7 @@
> > See Documentation/blockdev/paride.txt.
> >
> > pirq= [SMP,APIC] Manual mp-table setup
> > - See Documentation/x86/i386/IO-APIC.txt.
> > + See Documentation/x86/i386/IO-APIC.rst.
> >
> > plip= [PPT,NET] Parallel port network link
> > Format: { parport<nr> | timid | 0 }
> > @@ -5054,7 +5054,7 @@
> > Can be used multiple times for multiple
> devices.
> >
> > vga= [BOOT,X86-32] Select a particular video
> mode
> > - See Documentation/x86/boot.txt and
> > + See Documentation/x86/boot.rst and
> > Documentation/svga.txt.
> > Use vga=ask for menu.
> > This is actually a boot loader parameter;
> the value is
> > diff --git a/Documentation/admin-guide/ras.rst
> > b/Documentation/admin-guide/ras.rst index c7495e42e6f4..2b20f5f7380d 100644
> > --- a/Documentation/admin-guide/ras.rst
> > +++ b/Documentation/admin-guide/ras.rst
> > @@ -199,7 +199,7 @@ Architecture (MCA)\ [#f3]_.
> > mode).
> >
> > .. [#f3] For more details about the Machine Check Architecture (MCA),
> > - please read Documentation/x86/x86_64/machinecheck at the Kernel tree.
> > + please read Documentation/x86/x86_64/machinecheck.rst at the Kernel tree.
> >
> > EDAC - Error Detection And Correction
> > *************************************
> > diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt
> > b/Documentation/devicetree/bindings/net/fsl-enetc.txt index
> > c812e25ae90f..25fc687419db 100644
> > --- a/Documentation/devicetree/bindings/net/fsl-enetc.txt
> > +++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt
> > @@ -16,8 +16,8 @@ Required properties:
> > In this case, the ENETC node should include a "mdio" sub-node
> > that in turn should contain the "ethernet-phy" node describing the
> > external phy. Below properties are required, their bindings
> > -already defined in ethernet.txt or phy.txt, under
> > -Documentation/devicetree/bindings/net/*.
> > +already defined in Documentation/devicetree/bindings/net/ethernet.txt or
> > +Documentation/devicetree/bindings/net/phy.txt.
> >
> > Required:
> >
> > @@ -51,8 +51,7 @@ Example:
> > connection:
> >
> > In this case, the ENETC port node defines a fixed link connection,
> > -as specified by "fixed-link.txt", under
> > -Documentation/devicetree/bindings/net/*.
> > +as specified by Documentation/devicetree/bindings/net/fixed-link.txt.
> >
> > Required:
> >
> > diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
> > b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt index
> > 12b18f82d441..efa2c8b9b85a 100644
> > --- a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
> > +++ b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
> > @@ -3,7 +3,7 @@ Amlogic Meson AXG DWC PCIE SoC controller
> > Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI
> > core. It shares common functions with the PCIe DesignWare core driver and
> > inherits common properties defined in
> > -Documentation/devicetree/bindings/pci/designware-pci.txt.
> > +Documentation/devicetree/bindings/pci/designware-pcie.txt.
> >
> > Additional properties are described here:
> >
> > diff --git
> > a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
> > b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt index
> > 7ef2dbe48e8a..14d2eee96b3d 100644
> > --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
> > +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
> > @@ -97,7 +97,7 @@ Second Level Nodes - Regulators
> > sent for this regulator including those which are
> for a
> > strictly lower power state.
> >
> > -Other properties defined in Documentation/devicetree/bindings/regulator.txt
> > +Other properties defined in
> > Documentation/devicetree/bindings/regulator/regulator.txt may also be used.
> > regulator-initial-mode and regulator-allowed-modes may be specified for
> > VRM regulators using mode values from
> > include/dt-bindings/regulator/qcom,rpmh-regulator.h.
> > regulator-allow-bypass diff --git
> > a/Documentation/devicetree/booting-without-of.txt
> > b/Documentation/devicetree/booting-without-of.txt index
> > e86bd2f64117..60f8640f2b2f 100644
> > --- a/Documentation/devicetree/booting-without-of.txt
> > +++ b/Documentation/devicetree/booting-without-of.txt
> > @@ -277,7 +277,7 @@ it with special cases.
> > the decompressor (the real mode entry point goes to the same 32bit
> > entry point once it switched into protected mode). That entry point
> > supports one calling convention which is documented in
> > - Documentation/x86/boot.txt
> > + Documentation/x86/boot.rst
> > The physical pointer to the device-tree block (defined in chapter II)
> > is passed via setup_data which requires at least boot protocol 2.09.
> > The type filed is defined as
> > diff --git a/Documentation/driver-api/gpio/board.rst
> > b/Documentation/driver-api/gpio/board.rst index b37f3f7b8926..ce91518bf9f4
> > 100644
> > --- a/Documentation/driver-api/gpio/board.rst
> > +++ b/Documentation/driver-api/gpio/board.rst
> > @@ -101,7 +101,7 @@ with the help of _DSD (Device Specific Data), introduced
> > in ACPI 5.1:: }
> >
> > For more information about the ACPI GPIO bindings see
> > -Documentation/acpi/gpio-properties.txt.
> > +Documentation/firmware-guide/acpi/gpio-properties.rst.
> >
> > Platform Data
> > -------------
> > diff --git a/Documentation/driver-api/gpio/consumer.rst
> > b/Documentation/driver-api/gpio/consumer.rst index
> > 5e4d8aa68913..fdecb6d711db 100644
> > --- a/Documentation/driver-api/gpio/consumer.rst
> > +++ b/Documentation/driver-api/gpio/consumer.rst
> > @@ -437,7 +437,7 @@ case, it will be handled by the GPIO subsystem
> > automatically. However, if the _DSD is not present, the mappings between
> > GpioIo()/GpioInt() resources and GPIO connection IDs need to be provided by
> > device drivers.
> >
> > -For details refer to Documentation/acpi/gpio-properties.txt
> > +For details refer to Documentation/firmware-guide/acpi/gpio-properties.rst
> >
> >
> > Interacting With the Legacy GPIO Subsystem
> > diff --git a/Documentation/firmware-guide/acpi/enumeration.rst
> > b/Documentation/firmware-guide/acpi/enumeration.rst index
> > 850be9696931..1252617b520f 100644
> > --- a/Documentation/firmware-guide/acpi/enumeration.rst
> > +++ b/Documentation/firmware-guide/acpi/enumeration.rst
> > @@ -339,7 +339,7 @@ a code like this::
> > There are also devm_* versions of these functions which release the
> > descriptors once the device is released.
> >
> > -See Documentation/acpi/gpio-properties.txt for more information about the
> > +See Documentation/firmware-guide/acpi/gpio-properties.rst for more
> > information about the _DSD binding related to GPIOs.
> >
> > MFD devices
> > diff --git a/Documentation/firmware-guide/acpi/method-tracing.rst
> > b/Documentation/firmware-guide/acpi/method-tracing.rst index
> > d0b077b73f5f..0aa7e2c5d32a 100644
> > --- a/Documentation/firmware-guide/acpi/method-tracing.rst
> > +++ b/Documentation/firmware-guide/acpi/method-tracing.rst
> > @@ -68,7 +68,7 @@ c. Filter out the debug layer/level matched logs when the
> > specified
> >
> > Where:
> > 0xXXXXXXXX/0xYYYYYYYY
> > - Refer to Documentation/acpi/debug.txt for possible debug layer/level
> > + Refer to Documentation/firmware-guide/acpi/debug.rst for possible
> > debug layer/level masking values.
> > \PPPP.AAAA.TTTT.HHHH
> > Full path of a control method that can be found in the ACPI namespace.
> > diff --git a/Documentation/i2c/instantiating-devices
> > b/Documentation/i2c/instantiating-devices index 0d85ac1935b7..5a3e2f331e8c
> > 100644
> > --- a/Documentation/i2c/instantiating-devices
> > +++ b/Documentation/i2c/instantiating-devices
> > @@ -85,7 +85,7 @@ Method 1c: Declare the I2C devices via ACPI
> > -------------------------------------------
> >
> > ACPI can also describe I2C devices. There is special documentation for this
> > -which is currently located at Documentation/acpi/enumeration.txt. +which
> > is currently located at Documentation/firmware-guide/acpi/enumeration.rst.
> >
> >
> > Method 2: Instantiate the devices explicitly
> > diff --git a/Documentation/sysctl/kernel.txt
> > b/Documentation/sysctl/kernel.txt index f0c86fbb3b48..92f7f34b021a 100644
> > --- a/Documentation/sysctl/kernel.txt
> > +++ b/Documentation/sysctl/kernel.txt
> > @@ -155,7 +155,7 @@ is 0x15 and the full version number is 0x234, this file
> > will contain the value 340 = 0x154.
> >
> > See the type_of_loader and ext_loader_type fields in
> > -Documentation/x86/boot.txt for additional information.
> > +Documentation/x86/boot.rst for additional information.
> >
> > ==============================================================
> >
> > @@ -167,7 +167,7 @@ The complete bootloader version number. In the example
> > above, this file will contain the value 564 = 0x234.
> >
> > See the type_of_loader and ext_loader_ver fields in
> > -Documentation/x86/boot.txt for additional information.
> > +Documentation/x86/boot.rst for additional information.
> >
> > ==============================================================
> >
> > diff --git a/Documentation/translations/it_IT/process/howto.rst
> > b/Documentation/translations/it_IT/process/howto.rst index
> > 9903ac7c566b..44e6077730e8 100644
> > --- a/Documentation/translations/it_IT/process/howto.rst
> > +++ b/Documentation/translations/it_IT/process/howto.rst
> > @@ -131,7 +131,7 @@ Di seguito una lista di file che sono presenti nei
> > sorgente del kernel e che "Linux kernel patch submission format"
> > http://linux.yyz.us/patch-format.html
> >
> > - :ref:`Documentation/process/translations/it_IT/stable-api-nonsense.rst
> > <it_stable_api_nonsense>` +
> > :ref:`Documentation/translations/it_IT/process/stable-api-nonsense.rst
> > <it_stable_api_nonsense>`
> >
> > Questo file descrive la motivazioni sottostanti la conscia decisione di
> > non avere un API stabile all'interno del kernel, incluso cose come: diff
> > --git a/Documentation/translations/it_IT/process/stable-kernel-rules.rst
> > b/Documentation/translations/it_IT/process/stable-kernel-rules.rst index
> > 48e88e5ad2c5..4f206cee31a7 100644
> > --- a/Documentation/translations/it_IT/process/stable-kernel-rules.rst
> > +++ b/Documentation/translations/it_IT/process/stable-kernel-rules.rst
> > @@ -33,7 +33,7 @@ Regole sul tipo di patch che vengono o non vengono
> > accettate nei sorgenti - Non deve includere alcuna correzione "banale"
> > (correzioni grammaticali, pulizia dagli spazi bianchi, eccetera).
> > - Deve rispettare le regole scritte in
> > - :ref:`Documentation/translation/it_IT/process/submitting-patches.rst
> > <it_submittingpatches>` +
> > :ref:`Documentation/translations/it_IT/process/submitting-patches.rst
> > <it_submittingpatches>` - Questa patch o una equivalente deve esistere già
> > nei sorgenti principali di Linux
> >
> > @@ -43,7 +43,7 @@ Procedura per sottomettere patch per i sorgenti -stable
> >
> > - Se la patch contiene modifiche a dei file nelle cartelle net/ o
> > drivers/net, allora seguite le linee guida descritte in
> > - :ref:`Documentation/translation/it_IT/networking/netdev-FAQ.rst
> > <it_netdev-FAQ>`; +
> > :ref:`Documentation/translations/it_IT/networking/netdev-FAQ.rst
> > <it_netdev-FAQ>`; ma solo dopo aver verificato al seguente indirizzo che la
> > patch non sia già in coda:
> >
> > https://patchwork.ozlabs.org/bundle/davem/stable/?series=&submitter=&state=
> > *&q=&archive= diff --git
> > a/Documentation/translations/zh_CN/process/4.Coding.rst
> > b/Documentation/translations/zh_CN/process/4.Coding.rst index
> > 5301e9d55255..8bb777941394 100644
> > --- a/Documentation/translations/zh_CN/process/4.Coding.rst
> > +++ b/Documentation/translations/zh_CN/process/4.Coding.rst
> > @@ -241,7 +241,7 @@ scripts/coccinelle目录下已经打包了相当多的内核“语义补丁”
> >
> > 任何添加新用户空间界面的代码（包括新的sysfs或/proc文件）都应该包含该界面的
> > 文档，该文档使用户空间开发人员能够知道他们在使用什么。请参阅
> > -Documentation/abi/readme，了解如何格式化此文档以及需要提供哪些信息。
> > +Documentation/ABI/README，了解如何格式化此文档以及需要提供哪些信息。
> >
> > 文件 :ref:`Documentation/admin-guide/kernel-parameters.rst
> > <kernelparameters>` 描述了内核的所有引导时间参数。任何添加新参数的补丁都应该向该文件添加适当的
> > diff --git a/Documentation/x86/x86_64/5level-paging.rst
> > b/Documentation/x86/x86_64/5level-paging.rst index
> > ab88a4514163..44856417e6a5 100644
> > --- a/Documentation/x86/x86_64/5level-paging.rst
> > +++ b/Documentation/x86/x86_64/5level-paging.rst
> > @@ -20,7 +20,7 @@ physical address space. This "ought to be enough for
> > anybody" ©. QEMU 2.9 and later support 5-level paging.
> >
> > Virtual memory layout for 5-level paging is described in
> > -Documentation/x86/x86_64/mm.txt
> > +Documentation/x86/x86_64/mm.rst
> >
> >
> > Enabling 5-level paging
> > diff --git a/Documentation/x86/x86_64/boot-options.rst
> > b/Documentation/x86/x86_64/boot-options.rst index
> > 2f69836b8445..6a4285a3c7a4 100644
> > --- a/Documentation/x86/x86_64/boot-options.rst
> > +++ b/Documentation/x86/x86_64/boot-options.rst
> > @@ -9,7 +9,7 @@ only the AMD64 specific ones are listed here.
> >
> > Machine check
> > =============
> > -Please see Documentation/x86/x86_64/machinecheck for sysfs runtime
> > tunables. +Please see Documentation/x86/x86_64/machinecheck.rst for sysfs
> > runtime tunables.
> >
> > mce=off
> > Disable machine check
> > @@ -89,7 +89,7 @@ APICs
> > Don't use the local APIC (alias for i386 compatibility)
> >
> > pirq=...
> > - See Documentation/x86/i386/IO-APIC.txt
> > + See Documentation/x86/i386/IO-APIC.rst
> >
> > noapictimer
> > Don't set up the APIC timer
> > diff --git a/Documentation/x86/x86_64/fake-numa-for-cpusets.rst
> > b/Documentation/x86/x86_64/fake-numa-for-cpusets.rst index
> > 74fbb78b3c67..04df57b9aa3f 100644
> > --- a/Documentation/x86/x86_64/fake-numa-for-cpusets.rst
> > +++ b/Documentation/x86/x86_64/fake-numa-for-cpusets.rst
> > @@ -18,7 +18,7 @@ For more information on the features of cpusets, see
> > Documentation/cgroup-v1/cpusets.txt.
> > There are a number of different configurations you can use for your needs.
> > For more information on the numa=fake command line option and its various
> > ways of -configuring fake nodes, see
> > Documentation/x86/x86_64/boot-options.txt. +configuring fake nodes, see
> > Documentation/x86/x86_64/boot-options.rst.
> >
> > For the purposes of this introduction, we'll assume a very primitive NUMA
> > emulation setup of "numa=fake=4*512,". This will split our system memory
> > into diff --git a/MAINTAINERS b/MAINTAINERS
> > index 5cfbea4ce575..a38d7273705a 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -3874,7 +3874,7 @@
> > F: Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt
> > F: Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt
> > F: Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt
> > F: Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt
> > -F: Documentation/hwmon/lochnagar
> > +F: Documentation/hwmon/lochnagar.rst
> >
> > CISCO FCOE HBA DRIVER
> > M: Satish Kharat <satishkh@cisco.com>
> > @@ -11272,7 +11272,7 @@ NXP FXAS21002C DRIVER
> > M: Rui Miguel Silva <rmfrfs@gmail.com>
> > L: linux-iio@vger.kernel.org
> > S: Maintained
> > -F: Documentation/devicetree/bindings/iio/gyroscope/fxas21002c.txt
> > +F: Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
> > F: drivers/iio/gyro/fxas21002c_core.c
> > F: drivers/iio/gyro/fxas21002c.h
> > F: drivers/iio/gyro/fxas21002c_i2c.c
> > @@ -13043,7 +13043,7 @@ M: Niklas Cassel <niklas.cassel@linaro.org>
> > L: netdev@vger.kernel.org
> > S: Maintained
> > F: drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> > -F: Documentation/devicetree/bindings/net/qcom,dwmac.txt
> > +F: Documentation/devicetree/bindings/net/qcom,ethqos.txt
> >
> > QUALCOMM GENERIC INTERFACE I2C DRIVER
> > M: Alok Chauhan <alokc@codeaurora.org>
> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > index 8869742a85df..0f220264cc23 100644
> > --- a/arch/arm/Kconfig
> > +++ b/arch/arm/Kconfig
> > @@ -1263,7 +1263,7 @@ config SMP
> > uniprocessor machines. On a uniprocessor machine, the kernel
> > will run faster if you say N here.
> >
> > - See also <file:Documentation/x86/i386/IO-APIC.txt>,
> > + See also <file:Documentation/x86/i386/IO-APIC.rst>,
> > <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO
> available at
> > <http://tldp.org/HOWTO/SMP-HOWTO.html>.
> >
> > diff --git a/arch/arm64/kernel/kexec_image.c
> > b/arch/arm64/kernel/kexec_image.c index 07bf740bea91..31cc2f423aa8 100644
> > --- a/arch/arm64/kernel/kexec_image.c
> > +++ b/arch/arm64/kernel/kexec_image.c
> > @@ -53,7 +53,7 @@ static void *image_load(struct kimage *image,
> >
> > /*
> > * We require a kernel with an unambiguous Image header. Per
> > - * Documentation/booting.txt, this is the case when image_size
> > + * Documentation/arm64/booting.txt, this is the case when
> image_size
> > * is non-zero (practically speaking, since v3.17).
> > */
> > h = (struct arm64_image_header *)kernel;
> > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> > index 8c1c636308c8..e868d2bd48b8 100644
> > --- a/arch/powerpc/Kconfig
> > +++ b/arch/powerpc/Kconfig
> > @@ -898,7 +898,7 @@ config PPC_MEM_KEYS
> > page-based protections, but without requiring modification of
> the
> > page tables when an application changes protection domains.
> >
> > - For details, see Documentation/vm/protection-keys.rst
> > + For details, see Documentation/x86/protection-keys.rst
> >
> > If unsure, say y.
> >
> > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> > index 2bbbd4d1ba31..78fdf2dd71d1 100644
> > --- a/arch/x86/Kconfig
> > +++ b/arch/x86/Kconfig
> > @@ -395,7 +395,7 @@ config SMP
> > Y to "Enhanced Real Time Clock Support", below. The "Advanced
> Power
> > Management" code will be disabled if you say Y here.
> >
> > - See also <file:Documentation/x86/i386/IO-APIC.txt>,
> > + See also <file:Documentation/x86/i386/IO-APIC.rst>,
> > <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO
> available at
> > <http://www.tldp.org/docs.html#howto>.
> >
> > @@ -1290,7 +1290,7 @@ config MICROCODE
> > the Linux kernel.
> >
> > The preferred method to load microcode from a detached initrd is
> > described - in Documentation/x86/microcode.txt. For that you
> need to
> > enable + in Documentation/x86/microcode.rst. For that you need to enable
> > CONFIG_BLK_DEV_INITRD in order for the loader to be able to scan the initrd
> > for microcode blobs.
> >
> > @@ -1329,7 +1329,7 @@ config MICROCODE_OLD_INTERFACE
> > It is inadequate because it runs too late to be able to properly
> > load microcode on a machine and it needs special tools. Instead,
> you
> > should've switched to the early loading method with the initrd
> or
> > - builtin microcode by now: Documentation/x86/microcode.txt
> > + builtin microcode by now: Documentation/x86/microcode.rst
> >
> > config X86_MSR
> > tristate "/dev/cpu/*/msr - Model-specific register support"
> > @@ -1478,7 +1478,7 @@ config X86_5LEVEL
> > A kernel with the option enabled can be booted on machines that
> > support 4- or 5-level paging.
> >
> > - See Documentation/x86/x86_64/5level-paging.txt for more
> > + See Documentation/x86/x86_64/5level-paging.rst for more
> > information.
> >
> > Say N if unsure.
> > @@ -1626,7 +1626,7 @@ config ARCH_MEMORY_PROBE
> > depends on X86_64 && MEMORY_HOTPLUG
> > help
> > This option enables a sysfs memory/probe interface for testing.
> > - See Documentation/memory-hotplug.txt for more information.
> > + See Documentation/admin-guide/mm/memory-hotplug.rst for more
> > information. If you are unsure how to answer this question, answer N.
> >
> > config ARCH_PROC_KCORE_TEXT
> > @@ -1783,7 +1783,7 @@ config MTRR
> > You can safely say Y even if your machine doesn't have MTRRs,
> you'll
> > just add about 9 KB to your kernel.
> >
> > - See <file:Documentation/x86/mtrr.txt> for more information.
> > + See <file:Documentation/x86/mtrr.rst> for more information.
> >
> > config MTRR_SANITIZER
> > def_bool y
> > @@ -1895,7 +1895,7 @@ config X86_INTEL_MPX
> > process and adds some branches to paths used during
> > exec() and munmap().
> >
> > - For details, see Documentation/x86/intel_mpx.txt
> > + For details, see Documentation/x86/intel_mpx.rst
> >
> > If unsure, say N.
> >
> > @@ -1911,7 +1911,7 @@ config X86_INTEL_MEMORY_PROTECTION_KEYS
> > page-based protections, but without requiring modification of
> the
> > page tables when an application changes protection domains.
> >
> > - For details, see Documentation/x86/protection-keys.txt
> > + For details, see Documentation/x86/protection-keys.rst
> >
> > If unsure, say y.
> >
> > diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
> > index f730680dc818..59f598543203 100644
> > --- a/arch/x86/Kconfig.debug
> > +++ b/arch/x86/Kconfig.debug
> > @@ -156,7 +156,7 @@ config IOMMU_DEBUG
> > code. When you use it make sure you have a big enough
> > IOMMU/AGP aperture. Most of the options enabled by this can
> > be set more finegrained using the iommu= command line
> > - options. See Documentation/x86/x86_64/boot-options.txt for more
> > + options. See Documentation/x86/x86_64/boot-options.rst for more
> > details.
> >
> > config IOMMU_LEAK
> > diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
> > index 850b8762e889..90d791ca1a95 100644
> > --- a/arch/x86/boot/header.S
> > +++ b/arch/x86/boot/header.S
> > @@ -313,7 +313,7 @@ start_sys_seg: .word SYSSEG
> # obsolete and meaningless,
> > but just
> >
> > type_of_loader: .byte 0 # 0 means ancient
> bootloader, newer
> > # bootloaders know
> to change this.
> > - # See
> Documentation/x86/boot.txt for
> > + # See
> Documentation/x86/boot.rst for
> > # assigned ids
> >
> > # flags, unused bits must be zero (RFU) bit within loadflags
> > diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
> > index 11aa3b2afa4d..33f9fc38d014 100644
> > --- a/arch/x86/entry/entry_64.S
> > +++ b/arch/x86/entry/entry_64.S
> > @@ -8,7 +8,7 @@
> > *
> > * entry.S contains the system-call and fault low-level handling routines.
> > *
> > - * Some of this is documented in Documentation/x86/entry_64.txt
> > + * Some of this is documented in Documentation/x86/entry_64.rst
> > *
> > * A note on terminology:
> > * - iret frame: Architecture defined interrupt frame from SS to RIP
> > diff --git a/arch/x86/include/asm/bootparam_utils.h
> > b/arch/x86/include/asm/bootparam_utils.h index f6f6ef436599..101eb944f13c
> > 100644
> > --- a/arch/x86/include/asm/bootparam_utils.h
> > +++ b/arch/x86/include/asm/bootparam_utils.h
> > @@ -24,7 +24,7 @@ static void sanitize_boot_params(struct boot_params
> > *boot_params) * IMPORTANT NOTE TO BOOTLOADER AUTHORS: do not simply clear
> > * this field. The purpose of this field is to guarantee
> > * compliance with the x86 boot spec located in
> > - * Documentation/x86/boot.txt . That spec says that the
> > + * Documentation/x86/boot.rst . That spec says that the
> > * *whole* structure should be cleared, after which only the
> > * portion defined by struct setup_header (boot_params->hdr)
> > * should be copied in.
> > diff --git a/arch/x86/include/asm/page_64_types.h
> > b/arch/x86/include/asm/page_64_types.h index 793c14c372cb..288b065955b7
> > 100644
> > --- a/arch/x86/include/asm/page_64_types.h
> > +++ b/arch/x86/include/asm/page_64_types.h
> > @@ -48,7 +48,7 @@
> >
> > #define __START_KERNEL_map _AC(0xffffffff80000000, UL)
> >
> > -/* See Documentation/x86/x86_64/mm.txt for a description of the memory map.
> > */ +/* See Documentation/x86/x86_64/mm.rst for a description of the memory
> > map. */
> >
> > #define __PHYSICAL_MASK_SHIFT 52
> >
> > diff --git a/arch/x86/include/asm/pgtable_64_types.h
> > b/arch/x86/include/asm/pgtable_64_types.h index 88bca456da99..52e5f5f2240d
> > 100644
> > --- a/arch/x86/include/asm/pgtable_64_types.h
> > +++ b/arch/x86/include/asm/pgtable_64_types.h
> > @@ -103,7 +103,7 @@ extern unsigned int ptrs_per_p4d;
> > #define PGDIR_MASK (~(PGDIR_SIZE - 1))
> >
> > /*
> > - * See Documentation/x86/x86_64/mm.txt for a description of the memory map.
> > + * See Documentation/x86/x86_64/mm.rst for a description of the memory
> > map. *
> > * Be very careful vs. KASLR when changing anything here. The KASLR address
> > * range must not overlap with anything except the KASAN shadow area, which
> > diff --git a/arch/x86/kernel/cpu/microcode/amd.c
> > b/arch/x86/kernel/cpu/microcode/amd.c index e1f3ba19ba54..06d4e67f31ab
> > 100644
> > --- a/arch/x86/kernel/cpu/microcode/amd.c
> > +++ b/arch/x86/kernel/cpu/microcode/amd.c
> > @@ -61,7 +61,7 @@ static u8 amd_ucode_patch[PATCH_MAX_SIZE];
> >
> > /*
> > * Microcode patch container file is prepended to the initrd in cpio
> > - * format. See Documentation/x86/microcode.txt
> > + * format. See Documentation/x86/microcode.rst
> > */
> > static const char
> > ucode_path[] __maybe_unused = "kernel/x86/microcode/AuthenticAMD.bin";
> > diff --git a/arch/x86/kernel/kexec-bzimage64.c
> > b/arch/x86/kernel/kexec-bzimage64.c index 22f60dd26460..b07e7069b09e 100644
> > --- a/arch/x86/kernel/kexec-bzimage64.c
> > +++ b/arch/x86/kernel/kexec-bzimage64.c
> > @@ -416,7 +416,7 @@ static void *bzImage64_load(struct kimage *image, char
> > *kernel, efi_map_offset = params_cmdline_sz;
> > efi_setup_data_offset = efi_map_offset + ALIGN(efi_map_sz, 16);
> >
> > - /* Copy setup header onto bootparams. Documentation/x86/boot.txt
> */
> > + /* Copy setup header onto bootparams. Documentation/x86/boot.rst */
> > setup_header_size = 0x0202 + kernel[0x0201] - setup_hdr_offset;
> >
> > /* Is there a limit on setup header size? */
> > diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
> > index dcd272dbd0a9..f62b498b18fb 100644
> > --- a/arch/x86/kernel/pci-dma.c
> > +++ b/arch/x86/kernel/pci-dma.c
> > @@ -70,7 +70,7 @@ void __init pci_iommu_alloc(void)
> > }
> >
> > /*
> > - * See <Documentation/x86/x86_64/boot-options.txt> for the iommu kernel
> > + * See <Documentation/x86/x86_64/boot-options.rst> for the iommu kernel
> > * parameter documentation.
> > */
> > static __init int iommu_setup(char *p)
> > diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
> > index 7f61431c75fb..400c1ba033aa 100644
> > --- a/arch/x86/mm/tlb.c
> > +++ b/arch/x86/mm/tlb.c
> > @@ -711,7 +711,7 @@ void native_flush_tlb_others(const struct cpumask
> > *cpumask, }
> >
> > /*
> > - * See Documentation/x86/tlb.txt for details. We choose 33
> > + * See Documentation/x86/tlb.rst for details. We choose 33
> > * because it is large enough to cover the vast majority (at
> > * least 95%) of allocations, and is small enough that we are
> > * confident it will not cause too much overhead. Each single
> > diff --git a/arch/x86/platform/pvh/enlighten.c
> > b/arch/x86/platform/pvh/enlighten.c index 1861a2ba0f2b..c0a502f7e3a7 100644
> > --- a/arch/x86/platform/pvh/enlighten.c
> > +++ b/arch/x86/platform/pvh/enlighten.c
> > @@ -86,7 +86,7 @@ static void __init init_pvh_bootparams(bool xen_guest)
> > }
> >
> > /*
> > - * See Documentation/x86/boot.txt.
> > + * See Documentation/x86/boot.rst.
> > *
> > * Version 2.12 supports Xen entry point but we will use default
> x86/PC
> > * environment (i.e. hardware_subarch 0).
> > diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> > index 283ee94224c6..2438f37f2ca1 100644
> > --- a/drivers/acpi/Kconfig
> > +++ b/drivers/acpi/Kconfig
> > @@ -333,7 +333,7 @@ config ACPI_CUSTOM_DSDT_FILE
> > depends on !STANDALONE
> > help
> > This option supports a custom DSDT by linking it into the
> kernel.
> > - See Documentation/acpi/dsdt-override.txt
> > + See Documentation/admin-guide/acpi/dsdt-override.rst
> >
> > Enter the full path name to the file which includes the AmlCode
> > or dsdt_aml_code declaration.
> > @@ -355,7 +355,7 @@ config ACPI_TABLE_UPGRADE
> > This option provides functionality to upgrade arbitrary ACPI
> tables
> > via initrd. No functional change if no ACPI tables are passed
> via
> > initrd, therefore it's safe to say Y.
> > - See Documentation/acpi/initrd_table_override.txt for details
> > + See Documentation/admin-guide/acpi/initrd_table_override.rst for
> details
> >
> > config ACPI_TABLE_OVERRIDE_VIA_BUILTIN_INITRD
> > bool "Override ACPI tables from built-in initrd"
> > @@ -365,7 +365,7 @@ config ACPI_TABLE_OVERRIDE_VIA_BUILTIN_INITRD
> > This option provides functionality to override arbitrary ACPI
> tables
> > from built-in uncompressed initrd.
> >
> > - See Documentation/acpi/initrd_table_override.txt for details
> > + See Documentation/admin-guide/acpi/initrd_table_override.rst for
> details
> >
> > config ACPI_DEBUG
> > bool "Debug Statements"
> > @@ -374,7 +374,7 @@ config ACPI_DEBUG
> > output and increases the kernel size by around 50K.
> >
> > Use the acpi.debug_layer and acpi.debug_level kernel command-
> line
> > - parameters documented in Documentation/acpi/debug.txt and
> > + parameters documented in Documentation/firmware-guide/acpi/
> debug.rst and
> > Documentation/admin-guide/kernel-parameters.rst to control the type and
> > amount of debug output.
> >
> > @@ -445,7 +445,7 @@ config ACPI_CUSTOM_METHOD
> > help
> > This debug facility allows ACPI AML methods to be inserted and/
> or
> > replaced without rebooting the system. For details refer to:
> > - Documentation/acpi/method-customizing.txt.
> > + Documentation/firmware-guide/acpi/method-customizing.rst.
> >
> > NOTE: This option is security sensitive, because it allows
> arbitrary
> > kernel memory to be written to by root (uid=0) users, allowing
> them
> > diff --git a/drivers/net/ethernet/faraday/ftgmac100.c
> > b/drivers/net/ethernet/faraday/ftgmac100.c index b17b79e612a3..ac6280ad43a1
> > 100644
> > --- a/drivers/net/ethernet/faraday/ftgmac100.c
> > +++ b/drivers/net/ethernet/faraday/ftgmac100.c
> > @@ -1075,7 +1075,7 @@ static int ftgmac100_mii_probe(struct ftgmac100 *priv,
> > phy_interface_t intf) }
> >
> > /* Indicate that we support PAUSE frames (see comment in
> > - * Documentation/networking/phy.txt)
> > + * Documentation/networking/phy.rst)
> > */
> > phy_support_asym_pause(phydev);
> >
> > diff --git a/drivers/staging/fieldbus/Documentation/fieldbus_dev.txt
> > b/drivers/staging/fieldbus/Documentation/fieldbus_dev.txt index
> > 56af3f650fa3..89fb8e14676f 100644
> > --- a/drivers/staging/fieldbus/Documentation/fieldbus_dev.txt
> > +++ b/drivers/staging/fieldbus/Documentation/fieldbus_dev.txt
> > @@ -54,8 +54,8 @@ a limited few common behaviours and properties. This
> > allows us to define a simple interface consisting of a character device and
> > a set of sysfs files:
> >
> > See:
> > -Documentation/ABI/testing/sysfs-class-fieldbus-dev
> > -Documentation/ABI/testing/fieldbus-dev-cdev
> > +drivers/staging/fieldbus/Documentation/ABI/sysfs-class-fieldbus-dev
> > +drivers/staging/fieldbus/Documentation/ABI/fieldbus-dev-cdev
> >
> > Note that this simple interface does not provide a way to modify adapter
> > configuration settings. It is therefore useful only for adapters that get
> > their diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
> > index 1e3ed41ae1f3..69938dbae2d0 100644
> > --- a/drivers/vhost/vhost.c
> > +++ b/drivers/vhost/vhost.c
> > @@ -1694,7 +1694,7 @@ EXPORT_SYMBOL_GPL(vhost_dev_ioctl);
> >
> > /* TODO: This is really inefficient. We need something like get_user()
> > * (instruction directly accesses the data, with an exception table entry
> > - * returning -EFAULT). See Documentation/x86/exception-tables.txt.
> > + * returning -EFAULT). See Documentation/x86/exception-tables.rst.
> > */
> > static int set_bit_to_user(int nr, void __user *addr)
> > {
> > diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
> > index de1804aeaf69..98e3db7a89cd 100644
> > --- a/include/acpi/acpi_drivers.h
> > +++ b/include/acpi/acpi_drivers.h
> > @@ -25,7 +25,7 @@
> > #define ACPI_MAX_STRING 80
> >
> > /*
> > - * Please update drivers/acpi/debug.c and Documentation/acpi/debug.txt
> > + * Please update drivers/acpi/debug.c and
> > Documentation/firmware-guide/acpi/debug.rst * if you add to this list.
> > */
> > #define ACPI_BUS_COMPONENT 0x00010000
> > diff --git a/include/linux/fs_context.h b/include/linux/fs_context.h
> > index 1f966670c8dc..623eb58560b9 100644
> > --- a/include/linux/fs_context.h
> > +++ b/include/linux/fs_context.h
> > @@ -85,7 +85,7 @@ struct fs_parameter {
> > * Superblock creation fills in ->root whereas reconfiguration begins with
> > this * already set.
> > *
> > - * See Documentation/filesystems/mounting.txt
> > + * See Documentation/filesystems/mount_api.txt
> > */
> > struct fs_context {
> > const struct fs_context_operations *ops;
> > diff --git a/include/linux/lsm_hooks.h b/include/linux/lsm_hooks.h
> > index 47f58cfb6a19..df1318d85f7d 100644
> > --- a/include/linux/lsm_hooks.h
> > +++ b/include/linux/lsm_hooks.h
> > @@ -77,7 +77,7 @@
> > * state. This is called immediately after commit_creds().
> > *
> > * Security hooks for mount using fs_context.
> > - * [See also Documentation/filesystems/mounting.txt]
> > + * [See also Documentation/filesystems/mount_api.txt]
> > *
> > * @fs_context_dup:
> > * Allocate and attach a security structure to sc->security. This
> pointer
> > diff --git a/mm/Kconfig b/mm/Kconfig
> > index ee8d1f311858..6e5fb81bde4b 100644
> > --- a/mm/Kconfig
> > +++ b/mm/Kconfig
> > @@ -165,7 +165,7 @@ config MEMORY_HOTPLUG_DEFAULT_ONLINE
> > onlining policy (/sys/devices/system/memory/auto_online_blocks)
> which
> > determines what happens to newly added memory regions. Policy
> setting
> > can always be changed at runtime.
> > - See Documentation/memory-hotplug.txt for more information.
> > + See Documentation/admin-guide/mm/memory-hotplug.rst for more
> > information.
> >
> > Say Y here if you want all hot-plugged memory blocks to appear
> in
> > 'online' state by default.
> > diff --git a/security/Kconfig b/security/Kconfig
> > index aeac3676dd4d..6d75ed71970c 100644
> > --- a/security/Kconfig
> > +++ b/security/Kconfig
> > @@ -62,7 +62,7 @@ config PAGE_TABLE_ISOLATION
> > ensuring that the majority of kernel addresses are not mapped
> > into userspace.
> >
> > - See Documentation/x86/pti.txt for more details.
> > + See Documentation/x86/pti.rst for more details.
> >
> > config SECURITY_INFINIBAND
> > bool "Infiniband Security Hooks"
> > diff --git a/tools/include/linux/err.h b/tools/include/linux/err.h
> > index 2f5a12b88a86..25f2bb3a991d 100644
> > --- a/tools/include/linux/err.h
> > +++ b/tools/include/linux/err.h
> > @@ -20,7 +20,7 @@
> > * Userspace note:
> > * The same principle works for userspace, because 'error' pointers
> > * fall down to the unused hole far from user space, as described
> > - * in Documentation/x86/x86_64/mm.txt for x86_64 arch:
> > + * in Documentation/x86/x86_64/mm.rst for x86_64 arch:
> > *
> > * 0000000000000000 - 00007fffffffffff (=47 bits) user space, different per
> > mm hole caused by [48:63] sign extension * ffffffffffe00000 -
> > ffffffffffffffff (=2 MB) unused hole
> > diff --git a/tools/objtool/Documentation/stack-validation.txt
> > b/tools/objtool/Documentation/stack-validation.txt index
> > 4dd11a554b9b..de094670050b 100644
> > --- a/tools/objtool/Documentation/stack-validation.txt
> > +++ b/tools/objtool/Documentation/stack-validation.txt
> > @@ -21,7 +21,7 @@ instructions). Similarly, it knows how to follow switch
> > statements, for which gcc sometimes uses jump tables.
> >
> > (Objtool also has an 'orc generate' subcommand which generates debuginfo
> > -for the ORC unwinder. See Documentation/x86/orc-unwinder.txt in the
> > +for the ORC unwinder. See Documentation/x86/orc-unwinder.rst in the
> > kernel tree for more details.)
> >
> >
> > @@ -101,7 +101,7 @@ b) ORC (Oops Rewind Capability) unwind table generation
> > band. So it doesn't affect runtime performance and it can be
> > reliable even when interrupts or exceptions are involved.
> >
> > - For more details, see Documentation/x86/orc-unwinder.txt.
> > + For more details, see Documentation/x86/orc-unwinder.rst.
> >
> > c) Higher live patching compatibility rate
> >
> > diff --git a/tools/testing/selftests/x86/protection_keys.c
> > b/tools/testing/selftests/x86/protection_keys.c index
> > 5d546dcdbc80..798a5ddeee55 100644
> > --- a/tools/testing/selftests/x86/protection_keys.c
> > +++ b/tools/testing/selftests/x86/protection_keys.c
> > @@ -1,6 +1,6 @@
> > // SPDX-License-Identifier: GPL-2.0
> > /*
> > - * Tests x86 Memory Protection Keys (see
> > Documentation/x86/protection-keys.txt) + * Tests x86 Memory Protection Keys
> > (see Documentation/x86/protection-keys.rst) *
> > * There are examples in here of:
> > * * how to set protection keys on memory
>
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread