* [PATCH 1/2] arm64: dts: imx8mp: Add LCDIF2 & LDB nodes
@ 2022-12-08 9:08 Alexander Stein
2022-12-08 9:08 ` [PATCH 2/2] arm64: dts: freescale: Add LVDS overlay for TQMa8MPxL Alexander Stein
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Alexander Stein @ 2022-12-08 9:08 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer, Fabio Estevam
Cc: Alexander Stein, Pengutronix Kernel Team, NXP Linux Team,
devicetree, linux-arm-kernel
LCDIF2 is directly attached to the LVDS Display Bridge (LDB).
Both need the same clock source (VIDEO_PLL1).
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
I opted to add both at the same time, so the remote-endpoints are already
connected.
blk-ctrl@32ec0000 needs the 'simple-bus' compatible so that bridge@5c is
actually probed.
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 65 ++++++++++++++++++++++-
1 file changed, 64 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 7a6e6221f4219..c1beff33c4981 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1098,10 +1098,35 @@ aips4: bus@32c00000 {
#size-cells = <1>;
ranges;
+ lcdif2: display-controller@32e90000 {
+ compatible = "fsl,imx8mp-lcdif";
+ reg = <0x32e90000 0x238>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+ clock-names = "pix", "axi", "disp_axi";
+ assigned-clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
+ <&clk IMX8MP_VIDEO_PLL1>;
+ assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>,
+ <&clk IMX8MP_VIDEO_PLL1_REF_SEL>;
+ assigned-clock-rates = <0>, <1039500000>;
+ power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_2>;
+ status = "disabled";
+
+ port {
+ lcdif2_to_ldb: endpoint {
+ remote-endpoint = <&ldb_from_lcdif2>;
+ };
+ };
+ };
+
media_blk_ctrl: blk-ctrl@32ec0000 {
compatible = "fsl,imx8mp-media-blk-ctrl",
- "syscon";
+ "simple-bus", "syscon";
reg = <0x32ec0000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
power-domains = <&pgc_mediamix>,
<&pgc_mipi_phy1>,
<&pgc_mipi_phy1>,
@@ -1146,6 +1171,44 @@ media_blk_ctrl: blk-ctrl@32ec0000 {
assigned-clock-rates = <500000000>, <200000000>;
#power-domain-cells = <1>;
+
+ lvds_bridge: bridge@5c {
+ compatible = "fsl,imx8mp-ldb";
+ clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+ clock-names = "ldb";
+ reg = <0x5c 0x4>, <0x128 0x4>;
+ reg-names = "ldb", "lvds";
+ assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+ assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ ldb_from_lcdif2: endpoint {
+ remote-endpoint = <&lcdif2_to_ldb>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ldb_lvds_ch0: endpoint {
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ ldb_lvds_ch1: endpoint {
+ };
+ };
+ };
+ };
};
pcie_phy: pcie-phy@32f00000 {
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/2] arm64: dts: freescale: Add LVDS overlay for TQMa8MPxL
2022-12-08 9:08 [PATCH 1/2] arm64: dts: imx8mp: Add LCDIF2 & LDB nodes Alexander Stein
@ 2022-12-08 9:08 ` Alexander Stein
2022-12-20 8:48 ` Richard Leitner
2022-12-20 13:00 ` [PATCH 1/2] arm64: dts: imx8mp: Add LCDIF2 & LDB nodes Richard Leitner
2023-01-25 14:29 ` Shawn Guo
2 siblings, 1 reply; 7+ messages in thread
From: Alexander Stein @ 2022-12-08 9:08 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer, Fabio Estevam
Cc: Alexander Stein, Pengutronix Kernel Team, NXP Linux Team,
devicetree, linux-arm-kernel
This adds an overlay for the supported LVDS display tianma tm070jvhg33.
The display timings have to be specified explicitly. Using the typical pixel
clock, the LDB clock can not be configured as the 7-fold of that.
By setting pixel clock to 74.25 MHz, LDB can be configured to exactly
519.75 MHz.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
To be hold I'm unsure where to list the overlays. I checked other overlays
and opted to added them at the end of imx8mp section.
arch/arm64/boot/dts/freescale/Makefile | 4 ++
.../imx8mp-tqma8mpql-mba8mpxl-lvds.dtso | 61 +++++++++++++++++++
2 files changed, 65 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index ef6f364eaa183..9eedee68413b2 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -97,6 +97,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
+
+imx8mp-tqma8mpql-mba8mpxl-lvds-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds.dtb
+
dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso
new file mode 100644
index 0000000000000..ea44d605342ba
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+};
+
+&backlight_lvds {
+ status = "okay";
+};
+
+&display {
+ compatible = "tianma,tm070jvhg33";
+ status = "okay";
+
+ panel-timing {
+ clock-frequency = <74250000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hfront-porch = <64>;
+ hback-porch = <5>;
+ hsync-len = <1>;
+ vfront-porch = <40>;
+ vback-porch = <2>;
+ vsync-len = <1>;
+ de-active = <1>;
+ };
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&ldb_lvds_ch0>;
+ };
+ };
+};
+
+&lcdif2 {
+ status = "okay";
+};
+
+&lvds_bridge {
+ status = "okay";
+
+ ports {
+ port@1 {
+ ldb_lvds_ch0: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+};
+
+&pwm2 {
+ status = "okay";
+};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] arm64: dts: freescale: Add LVDS overlay for TQMa8MPxL
2022-12-08 9:08 ` [PATCH 2/2] arm64: dts: freescale: Add LVDS overlay for TQMa8MPxL Alexander Stein
@ 2022-12-20 8:48 ` Richard Leitner
2023-01-02 9:07 ` Alexander Stein
0 siblings, 1 reply; 7+ messages in thread
From: Richard Leitner @ 2022-12-20 8:48 UTC (permalink / raw)
To: Alexander Stein
Cc: Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer,
Fabio Estevam, Pengutronix Kernel Team, NXP Linux Team,
devicetree, linux-arm-kernel
Hi Alexander,
thanks for the series.
On Thu, Dec 08, 2022 at 10:08:42AM +0100, Alexander Stein wrote:
> This adds an overlay for the supported LVDS display tianma tm070jvhg33.
> The display timings have to be specified explicitly. Using the typical pixel
> clock, the LDB clock can not be configured as the 7-fold of that.
> By setting pixel clock to 74.25 MHz, LDB can be configured to exactly
> 519.75 MHz.
>
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
> To be hold I'm unsure where to list the overlays. I checked other overlays
> and opted to added them at the end of imx8mp section.
>
> arch/arm64/boot/dts/freescale/Makefile | 4 ++
> .../imx8mp-tqma8mpql-mba8mpxl-lvds.dtso | 61 +++++++++++++++++++
> 2 files changed, 65 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso
...
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso
> new file mode 100644
> index 0000000000000..ea44d605342ba
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso
> @@ -0,0 +1,61 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2022 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Alexander Stein
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +&{/} {
> + compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
> +};
> +
> +&backlight_lvds {
> + status = "okay";
> +};
> +
> +&display {
> + compatible = "tianma,tm070jvhg33";
> + status = "okay";
> +
> + panel-timing {
> + clock-frequency = <74250000>;
> + hactive = <1280>;
> + vactive = <800>;
> + hfront-porch = <64>;
> + hback-porch = <5>;
> + hsync-len = <1>;
> + vfront-porch = <40>;
> + vback-porch = <2>;
> + vsync-len = <1>;
> + de-active = <1>;
> + };
> +
> + port {
> + panel_in_lvds0: endpoint {
> + remote-endpoint = <&ldb_lvds_ch0>;
> + };
> + };
> +};
> +
> +&lcdif2 {
> + status = "okay";
> +};
> +
> +&lvds_bridge {
> + status = "okay";
> +
> + ports {
> + port@1 {
> + ldb_lvds_ch0: endpoint {
> + remote-endpoint = <&panel_in_lvds0>;
> + };
> + };
> + };
> +};
Wouldn't it be possible and easier to read if this was &ldb_lvds_ch0
only instead of the "whole" &lvds_bridge?
&ldb_lvds_ch0 {
remote-endpoint = <&panel_in_lvds0>;
};
> +
> +&pwm2 {
> + status = "okay";
> +};
> --
> 2.34.1
>
regards;rl
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2] arm64: dts: imx8mp: Add LCDIF2 & LDB nodes
2022-12-08 9:08 [PATCH 1/2] arm64: dts: imx8mp: Add LCDIF2 & LDB nodes Alexander Stein
2022-12-08 9:08 ` [PATCH 2/2] arm64: dts: freescale: Add LVDS overlay for TQMa8MPxL Alexander Stein
@ 2022-12-20 13:00 ` Richard Leitner
2023-01-24 14:26 ` Rasmus Villemoes
2023-01-25 14:29 ` Shawn Guo
2 siblings, 1 reply; 7+ messages in thread
From: Richard Leitner @ 2022-12-20 13:00 UTC (permalink / raw)
To: Alexander Stein
Cc: Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer,
Fabio Estevam, Pengutronix Kernel Team, NXP Linux Team,
devicetree, linux-arm-kernel
On Thu, Dec 08, 2022 at 10:08:41AM +0100, Alexander Stein wrote:
> LCDIF2 is directly attached to the LVDS Display Bridge (LDB).
> Both need the same clock source (VIDEO_PLL1).
>
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Successfully tested this patch on a custom i.MX8MP board. Therefore
please feel free to add
Tested-by: Richard Leitner <richard.leitner@linux.dev>
Thanks & regards;rl
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] arm64: dts: freescale: Add LVDS overlay for TQMa8MPxL
2022-12-20 8:48 ` Richard Leitner
@ 2023-01-02 9:07 ` Alexander Stein
0 siblings, 0 replies; 7+ messages in thread
From: Alexander Stein @ 2023-01-02 9:07 UTC (permalink / raw)
To: Richard Leitner
Cc: Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer,
Fabio Estevam, Pengutronix Kernel Team, NXP Linux Team,
devicetree, linux-arm-kernel
Hello Richard,
Am Dienstag, 20. Dezember 2022, 09:48:45 CET schrieb Richard Leitner:
> Hi Alexander,
>
> thanks for the series.
>
> On Thu, Dec 08, 2022 at 10:08:42AM +0100, Alexander Stein wrote:
> > This adds an overlay for the supported LVDS display tianma tm070jvhg33.
> > The display timings have to be specified explicitly. Using the typical
> > pixel clock, the LDB clock can not be configured as the 7-fold of that.
> > By setting pixel clock to 74.25 MHz, LDB can be configured to exactly
> > 519.75 MHz.
> >
> > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> > ---
> > To be hold I'm unsure where to list the overlays. I checked other overlays
> > and opted to added them at the end of imx8mp section.
> >
> > arch/arm64/boot/dts/freescale/Makefile | 4 ++
> > .../imx8mp-tqma8mpql-mba8mpxl-lvds.dtso | 61 +++++++++++++++++++
> > 2 files changed, 65 insertions(+)
> > create mode 100644
> > arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso
> ...
>
> > diff --git
> > a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso
> > b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso new
> > file mode 100644
> > index 0000000000000..ea44d605342ba
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso
> > @@ -0,0 +1,61 @@
> > +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> > +/*
> > + * Copyright (c) 2022 TQ-Systems GmbH <linux@ew.tq-group.com>,
> > + * D-82229 Seefeld, Germany.
> > + * Author: Alexander Stein
> > + */
> > +
> > +/dts-v1/;
> > +/plugin/;
> > +
> > +&{/} {
> > + compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql",
> > "fsl,imx8mp"; +};
> > +
> > +&backlight_lvds {
> > + status = "okay";
> > +};
> > +
> > +&display {
> > + compatible = "tianma,tm070jvhg33";
> > + status = "okay";
> > +
> > + panel-timing {
> > + clock-frequency = <74250000>;
> > + hactive = <1280>;
> > + vactive = <800>;
> > + hfront-porch = <64>;
> > + hback-porch = <5>;
> > + hsync-len = <1>;
> > + vfront-porch = <40>;
> > + vback-porch = <2>;
> > + vsync-len = <1>;
> > + de-active = <1>;
> > + };
> > +
> > + port {
> > + panel_in_lvds0: endpoint {
> > + remote-endpoint = <&ldb_lvds_ch0>;
> > + };
> > + };
> > +};
> > +
> > +&lcdif2 {
> > + status = "okay";
> > +};
> > +
> > +&lvds_bridge {
> > + status = "okay";
> > +
> > + ports {
> > + port@1 {
> > + ldb_lvds_ch0: endpoint {
> > + remote-endpoint = <&panel_in_lvds0>;
> > + };
> > + };
> > + };
> > +};
>
> Wouldn't it be possible and easier to read if this was &ldb_lvds_ch0
> only instead of the "whole" &lvds_bridge?
>
> &ldb_lvds_ch0 {
> remote-endpoint = <&panel_in_lvds0>;
> };
Yes it is possible and easier to read. Unfortunately dtbs_check will raise the
follwing warnings when doing so:
> arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo: Warning
(graph_port): /fragment@4: graph port node name should be 'port'
> ../arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso:
47.15-49.3: Warning (graph_endpoint): /fragment@4/__overlay__: graph endpoint
node name should be 'endpoint'
> ../arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso:
47.15-49.3: Warning (graph_endpoint): /fragment@4/__overlay__: graph
connection to node '/fragment@2/__overlay__/port/endpoint' is not
bidirectional
I'm not sure which way is the preferred/correct one or if this is just an
issue in dtc, raising the warnings.
Best regards,
Alexander
> > +
> > +&pwm2 {
> > + status = "okay";
> > +};
>
> regards;rl
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2] arm64: dts: imx8mp: Add LCDIF2 & LDB nodes
2022-12-20 13:00 ` [PATCH 1/2] arm64: dts: imx8mp: Add LCDIF2 & LDB nodes Richard Leitner
@ 2023-01-24 14:26 ` Rasmus Villemoes
0 siblings, 0 replies; 7+ messages in thread
From: Rasmus Villemoes @ 2023-01-24 14:26 UTC (permalink / raw)
To: richard.leitner
Cc: alexander.stein, devicetree, festevam, kernel,
krzysztof.kozlowski+dt, linux-arm-kernel, linux-imx, robh+dt,
s.hauer, shawnguo
On Thu, Dec 08, 2022 at 10:08:41AM +0100, Alexander Stein wrote:
> LCDIF2 is directly attached to the LVDS Display Bridge (LDB).
> Both need the same clock source (VIDEO_PLL1).
As Richard, I've tested this on a custom imx8mp board, so this is also
Tested-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Can this be picked up and make way towards mainline please?
Rasmus
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2] arm64: dts: imx8mp: Add LCDIF2 & LDB nodes
2022-12-08 9:08 [PATCH 1/2] arm64: dts: imx8mp: Add LCDIF2 & LDB nodes Alexander Stein
2022-12-08 9:08 ` [PATCH 2/2] arm64: dts: freescale: Add LVDS overlay for TQMa8MPxL Alexander Stein
2022-12-20 13:00 ` [PATCH 1/2] arm64: dts: imx8mp: Add LCDIF2 & LDB nodes Richard Leitner
@ 2023-01-25 14:29 ` Shawn Guo
2 siblings, 0 replies; 7+ messages in thread
From: Shawn Guo @ 2023-01-25 14:29 UTC (permalink / raw)
To: Alexander Stein
Cc: Rob Herring, Krzysztof Kozlowski, Sascha Hauer, Fabio Estevam,
Pengutronix Kernel Team, NXP Linux Team, devicetree,
linux-arm-kernel
On Thu, Dec 08, 2022 at 10:08:41AM +0100, Alexander Stein wrote:
> LCDIF2 is directly attached to the LVDS Display Bridge (LDB).
> Both need the same clock source (VIDEO_PLL1).
>
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Applied both, thanks!
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2023-01-25 14:30 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-12-08 9:08 [PATCH 1/2] arm64: dts: imx8mp: Add LCDIF2 & LDB nodes Alexander Stein
2022-12-08 9:08 ` [PATCH 2/2] arm64: dts: freescale: Add LVDS overlay for TQMa8MPxL Alexander Stein
2022-12-20 8:48 ` Richard Leitner
2023-01-02 9:07 ` Alexander Stein
2022-12-20 13:00 ` [PATCH 1/2] arm64: dts: imx8mp: Add LCDIF2 & LDB nodes Richard Leitner
2023-01-24 14:26 ` Rasmus Villemoes
2023-01-25 14:29 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).