From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Andre Przywara <andre.przywara@arm.com>
Cc: Rob Herring <robh@kernel.org>, Icenowy Zheng <icenowy@aosc.io>,
Samuel Holland <samuel@sholland.org>,
Ondrej Jirman <megous@megous.com>,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@googlegroups.com, linux-sunxi@lists.linux.dev,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v6 17/17] arm64: dts: allwinner: h616: Add X96 Mate TV box support
Date: Sat, 22 May 2021 09:32:32 +0200 [thread overview]
Message-ID: <2338288.Zx76mVtT47@kista> (raw)
In-Reply-To: <20210519104152.21119-18-andre.przywara@arm.com>
Hi Andre!
Dne sreda, 19. maj 2021 ob 12:41:52 CEST je Andre Przywara napisal(a):
> The X96 Mate is an Allwinner H616 based TV box, featuring:
> - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU
> - 2GiB/4GiB RAM (fully usable!)
> - 16/32/64GiB eMMC
> - 100Mbps Ethernet (via embedded AC200 EPHY, not yet supported)
> - Unsupported Allwinner WiFi chip
> - 2 x USB 2.0 host ports
> - HDMI port
> - IR receiver
> - 5V/2A DC power supply via barrel plug
>
> For more information see: https://linux-sunxi.org/X96_Mate
>
> Add a basic devicetree for it, with SD card, eMMC and USB working, as
> well as serial and the essential peripherals, like the AXP PMIC.
>
> This DT is somewhat minimal, and should work on many other similar TV
> boxes with the Allwinner H616 chip.
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
> arch/arm64/boot/dts/allwinner/Makefile | 1 +
> .../dts/allwinner/sun50i-h616-x96-mate.dts | 201 ++++++++++++++++++
> 2 files changed, 202 insertions(+)
> create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
>
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/
allwinner/Makefile
> index 9ba4b5d92657..370d24ebaacf 100644
> --- a/arch/arm64/boot/dts/allwinner/Makefile
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -37,3 +37,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts b/arch/
arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
> new file mode 100644
> index 000000000000..b960bb310289
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
> @@ -0,0 +1,201 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (C) 2021 Arm Ltd.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-h616.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + model = "X96 Mate";
> + compatible = "hechuang,x96-mate", "allwinner,sun50i-h616";
Please document compatible.
Best regards,
Jernej
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + reg_vcc5v: vcc5v {
> + /* board wide 5V supply directly from the DC input */
> + compatible = "regulator-fixed";
> + regulator-name = "vcc-5v";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + };
> +};
> +
> +&ehci0 {
> + status = "okay";
> +};
> +
> +&ehci2 {
> + status = "okay";
> +};
> +
> +&ir {
> + status = "okay";
> +};
> +
> +&mmc0 {
> + vmmc-supply = <®_dcdce>;
> + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
> + bus-width = <4>;
> + status = "okay";
> +};
> +
> +&mmc2 {
> + vmmc-supply = <®_dcdce>;
> + vqmmc-supply = <®_bldo1>;
> + bus-width = <8>;
> + non-removable;
> + cap-mmc-hw-reset;
> + mmc-hs200-1_8v;
> + status = "okay";
> +};
> +
> +&ohci0 {
> + status = "okay";
> +};
> +
> +&ohci2 {
> + status = "okay";
> +};
> +
> +&r_rsb {
> + status = "okay";
> +
> + axp305: pmic@745 {
> + compatible = "x-powers,axp305", "x-powers,axp805",
> + "x-powers,axp806";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + reg = <0x745>;
> +
> + x-powers,self-working-mode;
> + vina-supply = <®_vcc5v>;
> + vinb-supply = <®_vcc5v>;
> + vinc-supply = <®_vcc5v>;
> + vind-supply = <®_vcc5v>;
> + vine-supply = <®_vcc5v>;
> + aldoin-supply = <®_vcc5v>;
> + bldoin-supply = <®_vcc5v>;
> + cldoin-supply = <®_vcc5v>;
> +
> + regulators {
> + reg_aldo1: aldo1 {
> + regulator-always-on;
> + regulator-min-microvolt =
<3300000>;
> + regulator-max-microvolt =
<3300000>;
> + regulator-name = "vcc-sys";
> + };
> +
> + /* Enabled by the Android BSP */
> + reg_aldo2: aldo2 {
> + regulator-min-microvolt =
<3300000>;
> + regulator-max-microvolt =
<3300000>;
> + regulator-name = "vcc3v3-ext";
> + status = "disabled";
> + };
> +
> + /* Enabled by the Android BSP */
> + reg_aldo3: aldo3 {
> + regulator-min-microvolt =
<3300000>;
> + regulator-max-microvolt =
<3300000>;
> + regulator-name = "vcc3v3-ext2";
> + status = "disabled";
> + };
> +
> + reg_bldo1: bldo1 {
> + regulator-always-on;
> + regulator-min-microvolt =
<1800000>;
> + regulator-max-microvolt =
<1800000>;
> + regulator-name = "vcc1v8";
> + };
> +
> + /* Enabled by the Android BSP */
> + reg_bldo2: bldo2 {
> + regulator-min-microvolt =
<1800000>;
> + regulator-max-microvolt =
<1800000>;
> + regulator-name = "vcc1v8-2";
> + status = "disabled";
> + };
> +
> + bldo3 {
> + /* unused */
> + };
> +
> + bldo4 {
> + /* unused */
> + };
> +
> + cldo1 {
> + regulator-min-microvolt =
<2500000>;
> + regulator-max-microvolt =
<2500000>;
> + regulator-name = "vcc2v5";
> + };
> +
> + cldo2 {
> + /* unused */
> + };
> +
> + cldo3 {
> + /* unused */
> + };
> +
> + reg_dcdca: dcdca {
> + regulator-always-on;
> + regulator-min-microvolt =
<810000>;
> + regulator-max-microvolt =
<1080000>;
> + regulator-name = "vdd-cpu";
> + };
> +
> + reg_dcdcc: dcdcc {
> + regulator-always-on;
> + regulator-min-microvolt =
<810000>;
> + regulator-max-microvolt =
<1080000>;
> + regulator-name = "vdd-gpu-sys";
> + };
> +
> + reg_dcdcd: dcdcd {
> + regulator-always-on;
> + regulator-min-microvolt =
<1360000>;
> + regulator-max-microvolt =
<1360000>;
> + regulator-name = "vdd-dram";
> + };
> +
> + reg_dcdce: dcdce {
> + regulator-boot-on;
> + regulator-min-microvolt =
<3300000>;
> + regulator-max-microvolt =
<3300000>;
> + regulator-name = "vcc-eth-mmc";
> + };
> +
> + sw {
> + /* unused */
> + };
> + };
> + };
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_ph_pins>;
> + status = "okay";
> +};
> +
> +&usbotg {
> + dr_mode = "host"; /* USB A type receptable */
> + status = "okay";
> +};
> +
> +&usbphy {
> + status = "okay";
> +};
> --
> 2.17.5
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2021-05-22 7:34 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-19 10:41 [PATCH v6 00/17] arm64: sunxi: Initial Allwinner H616 SoC support Andre Przywara
2021-05-19 10:41 ` [PATCH v6 01/17] dt-bindings: mfd: axp20x: Add AXP305 compatible (plus optional IRQ) Andre Przywara
2021-05-21 1:39 ` Rob Herring
2021-05-22 14:46 ` Samuel Holland
2021-05-23 0:01 ` Andre Przywara
2021-05-19 10:41 ` [PATCH v6 02/17] mfd: axp20x: Allow AXP 806 chips without interrupt lines Andre Przywara
2021-05-19 15:01 ` Lee Jones
2021-05-19 10:41 ` [PATCH v6 03/17] dt-bindings: rtc: sun6i: Add H616 compatible string Andre Przywara
2021-05-21 1:39 ` Rob Herring
2021-05-21 2:37 ` Samuel Holland
2021-06-07 12:59 ` Andre Przywara
2021-06-08 4:23 ` Samuel Holland
2021-06-15 12:24 ` Andre Przywara
2021-06-16 9:07 ` Maxime Ripard
2021-06-16 11:28 ` Andre Przywara
2021-05-19 10:41 ` [PATCH v6 04/17] rtc: sun6i: Add support for linear day storage Andre Przywara
2021-05-22 7:26 ` Jernej Škrabec
2021-05-19 10:41 ` [PATCH v6 05/17] rtc: sun6i: Add Allwinner H616 support Andre Przywara
2021-05-22 7:29 ` Jernej Škrabec
2021-05-23 0:06 ` Andre Przywara
2021-05-19 10:41 ` [PATCH v6 06/17] dt-bindings: net: sun8i-emac: Add H616 compatible string Andre Przywara
2021-05-21 1:40 ` Rob Herring
2021-05-19 10:41 ` [PATCH v6 07/17] net: stmmac: dwmac-sun8i: Prepare for second EMAC clock register Andre Przywara
2021-05-19 10:41 ` [PATCH v6 08/17] dt-bindings: usb: Add H616 compatible string Andre Przywara
2021-05-21 1:40 ` Rob Herring
2021-05-19 10:41 ` [PATCH v6 09/17] dt-bindings: usb: sunxi-musb: " Andre Przywara
2021-05-21 1:40 ` Rob Herring
2021-05-19 10:41 ` [PATCH v6 10/17] phy: sun4i-usb: Rework HCI PHY (aka. "pmu_unk1") handling Andre Przywara
2021-05-19 10:41 ` [PATCH v6 11/17] phy: sun4i-usb: Allow reset line to be shared Andre Przywara
2021-05-19 10:41 ` [PATCH v6 12/17] phy: sun4i-usb: Introduce port2 SIDDQ quirk Andre Przywara
2021-05-24 11:59 ` Maxime Ripard
2021-05-24 12:51 ` Jernej Škrabec
2021-05-25 11:29 ` Andre Przywara
2021-06-07 13:22 ` Maxime Ripard
2021-06-07 14:17 ` Andre Przywara
2021-06-07 14:26 ` [linux-sunxi] " Chen-Yu Tsai
2021-06-14 0:20 ` Andre Przywara
2021-05-19 10:41 ` [PATCH v6 13/17] phy: sun4i-usb: Add support for the H616 USB PHY Andre Przywara
2021-05-19 10:41 ` [PATCH v6 14/17] arm64: dts: allwinner: Add Allwinner H616 .dtsi file Andre Przywara
2021-05-24 12:02 ` Maxime Ripard
2021-06-07 12:59 ` Andre Przywara
2021-05-19 10:41 ` [PATCH v6 15/17] dt-bindings: arm: sunxi: Add OrangePi Zero 2 binding Andre Przywara
2021-05-19 10:41 ` [PATCH v6 16/17] arm64: dts: allwinner: h616: Add OrangePi Zero 2 board support Andre Przywara
2021-05-19 10:41 ` [PATCH v6 17/17] arm64: dts: allwinner: h616: Add X96 Mate TV box support Andre Przywara
2021-05-22 7:32 ` Jernej Škrabec [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2338288.Zx76mVtT47@kista \
--to=jernej.skrabec@gmail.com \
--cc=andre.przywara@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.io \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=megous@megous.com \
--cc=mripard@kernel.org \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).