From: Leonard Crestez <leonard.crestez@nxp.com>
To: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
Lee Jones <lee.jones@linaro.org>, Mark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
Aisheng Dong <aisheng.dong@nxp.com>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
Angus Ainslie <angus@akkea.ca>, Rob Herring <robh+dt@kernel.org>,
dl-linux-imx <linux-imx@nxp.com>,
"kernel@pengutronix.de" <kernel@pengutronix.de>,
Fabio Estevam <fabio.estevam@nxp.com>,
Robin Gong <yibin.gong@nxp.com>, Shawn Guo <shawnguo@kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH 3/3] mfd: bd718x7: Make power button press duration configurable
Date: Mon, 20 May 2019 08:55:58 +0000 [thread overview]
Message-ID: <3ffd7b9d0b9cc45ac0fd671a701f857be4cfde46.1558341613.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1558341613.git.leonard.crestez@nxp.com>
Allow overwriting the values in BD718XX_REG_PWRONCONFIG0 and
BD718XX_REG_PWRONCONFIG1 via devicetree.
Keep existing values (from bootloader or OTP) if property is not
present.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
drivers/mfd/rohm-bd718x7.c | 42 ++++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/drivers/mfd/rohm-bd718x7.c b/drivers/mfd/rohm-bd718x7.c
index cdbef83884f0..dffa3f4bffad 100644
--- a/drivers/mfd/rohm-bd718x7.c
+++ b/drivers/mfd/rohm-bd718x7.c
@@ -79,10 +79,48 @@ static const struct regmap_config bd718xx_regmap_config = {
.volatile_table = &volatile_regs,
.max_register = BD718XX_MAX_REGISTER - 1,
.cache_type = REGCACHE_RBTREE,
};
+static int bd718xx_init_press_duration(struct bd718xx *bd718xx)
+{
+ struct device* dev = bd718xx->dev;
+ u32 short_press_ms, long_press_ms;
+ u32 short_press_value, long_press_value;
+ int ret;
+
+ ret = of_property_read_u32(dev->of_node, "rohm,short-press-ms",
+ &short_press_ms);
+ if (!ret) {
+ short_press_value = min(15u, short_press_ms / 500);
+ ret = regmap_update_bits(bd718xx->regmap,
+ BD718XX_REG_PWRONCONFIG0,
+ BD718XX_PWRBTN_PRESS_DURATION_MASK,
+ short_press_value);
+ if (ret) {
+ dev_err(dev, "Failed to init pwron short press\n");
+ return ret;
+ }
+ }
+
+ ret = of_property_read_u32(dev->of_node, "rohm,long-press-ms",
+ &long_press_ms);
+ if (!ret) {
+ long_press_value = min(15u, long_press_ms / 1000);
+ ret = regmap_update_bits(bd718xx->regmap,
+ BD718XX_REG_PWRONCONFIG1,
+ BD718XX_PWRBTN_PRESS_DURATION_MASK,
+ long_press_value);
+ if (ret) {
+ dev_err(dev, "Failed to init pwron long press\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
static int bd718xx_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct bd718xx *bd718xx;
int ret;
@@ -115,10 +153,14 @@ static int bd718xx_i2c_probe(struct i2c_client *i2c,
if (ret) {
dev_err(&i2c->dev, "Failed to add irq_chip\n");
return ret;
}
+ ret = bd718xx_init_press_duration(bd718xx);
+ if (ret)
+ return ret;
+
ret = regmap_irq_get_virq(bd718xx->irq_data, BD718XX_INT_PWRBTN_S);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to get the IRQ\n");
return ret;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-05-20 8:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-20 8:55 [PATCH 0/3] mfd: bd718x7: Set button press duration via dt only Leonard Crestez
2019-05-20 8:55 ` [PATCH 1/3] mfd: bd718x7: Remove hardcoded config for button press duration Leonard Crestez
2019-05-20 9:11 ` Vaittinen, Matti
2019-05-20 8:55 ` [PATCH 2/3] dt-bindings: mfd: Document short/long press duration for bd718x7 Leonard Crestez
2019-05-20 9:15 ` Vaittinen, Matti
2019-05-20 8:55 ` Leonard Crestez [this message]
2019-05-20 9:23 ` [PATCH 3/3] mfd: bd718x7: Make power button press duration configurable Vaittinen, Matti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3ffd7b9d0b9cc45ac0fd671a701f857be4cfde46.1558341613.git.leonard.crestez@nxp.com \
--to=leonard.crestez@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=angus@akkea.ca \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=mark.rutland@arm.com \
--cc=matti.vaittinen@fi.rohmeurope.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=yibin.gong@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).