From: jiri.prchal@aksignal.cz (Jiří Prchal)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: at91: at91sam9x5: sets NPCS0 (PA14) back to GPIO
Date: Fri, 25 Jul 2014 10:54:23 +0200 [thread overview]
Message-ID: <53D21B3F.7060006@aksignal.cz> (raw)
In-Reply-To: <20140725104553.403921b1@bbrezillon>
Here it is:
cat /sys/kernel/debug/gpio
GPIOs 0-31, platform/fffff400.gpio, fffff400.gpio:
[in20] GPIOfffff400.gpio3: [gpio] set
[spi0.3] GPIOfffff400.gpio14: [gpio] set
[in19] GPIOfffff400.gpio21: [gpio] set
[spi0.1] GPIOfffff400.gpio22: [gpio] set
[spi0.0] GPIOfffff400.gpio23: [gpio] set
[in18] GPIOfffff400.gpio28: [gpio] set
[out20] GPIOfffff400.gpio29: [gpio] clear
[out18] GPIOfffff400.gpio30: [gpio] clear
[out19] GPIOfffff400.gpio31: [gpio] clear
GPIOs 32-50, platform/fffff600.gpio, fffff600.gpio:
[blue] GPIOfffff600.gpio12: [gpio] set
[gsm_on] GPIOfffff600.gpio13: [gpio] clear
[yellow] GPIOfffff600.gpio14: [gpio] clear
[gsm_rst] GPIOfffff600.gpio15: [gpio] clear
[green] GPIOfffff600.gpio16: [gpio] clear
[red] GPIOfffff600.gpio18: [gpio] clear
GPIOs 64-95, platform/fffff800.gpio, fffff800.gpio:
[in17] GPIOfffff800.gpio16: [gpio] set
[in13] GPIOfffff800.gpio18: [gpio] set
[in14] GPIOfffff800.gpio20: [gpio] set
[por] GPIOfffff800.gpio25: [gpio] clear
[out16] GPIOfffff800.gpio26: [gpio] clear
[out15] GPIOfffff800.gpio28: [gpio] clear
[spi0.2] GPIOfffff800.gpio29: [gpio] set
[out17] GPIOfffff800.gpio30: [gpio] clear
GPIOs 96-117, platform/fffffa00.gpio, fffffa00.gpio:
[nand_enable] GPIOfffffa00.gpio4: [gpio] set
[nand_rdy] GPIOfffffa00.gpio5: [gpio] set
[atmel_usba_udc] GPIOfffffa00.gpio21: [gpio] clear
Dne 25.7.2014 v 10:45 Boris BREZILLON napsal(a):
> On Fri, 25 Jul 2014 10:27:13 +0200
> Ji?? Prchal <jiri.prchal@aksignal.cz> wrote:
>
> [...]
>>
>>
>>> Could you also paste the content of /sys/kernel/debug/gpio ?
>> The /sys/kernel/debug/ is empty.
>
> You have to enable CONFIG_DEBUG_FS in your config and then mount the
> debug file system:
>
> #mount -t debugfs dbg /sys/kernel/debug
>
>
>
>
next prev parent reply other threads:[~2014-07-25 8:54 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-11 10:22 [PATCH] ARM: at91: at91sam9x5: add clocks for usb device Bo Shen
2014-07-11 10:47 ` Alexandre Belloni
2014-07-11 10:55 ` Jiří Prchal
2014-07-24 13:38 ` [PATCH] ARM: at91: at91sam9x5: sets NPCS0 (PA14) back to GPIO Jiří Prchal
2014-07-24 14:26 ` Boris BREZILLON
2014-07-24 15:06 ` Jiří Prchal
2014-07-24 15:58 ` Boris BREZILLON
2014-07-25 6:14 ` Jiří Prchal
2014-07-25 7:53 ` Boris BREZILLON
2014-07-25 8:27 ` Jiří Prchal
2014-07-25 8:45 ` Boris BREZILLON
2014-07-25 8:54 ` Jiří Prchal [this message]
2014-07-25 9:01 ` Boris BREZILLON
2014-07-25 9:13 ` Jiří Prchal
2014-07-25 9:31 ` Boris BREZILLON
2014-07-25 10:06 ` Jiří Prchal
2014-07-25 10:18 ` Boris BREZILLON
2014-07-25 10:32 ` Jiří Prchal
2014-07-25 11:34 ` Boris BREZILLON
2014-07-25 8:33 ` Jiří Prchal
2014-07-25 8:30 ` Alexandre Belloni
2014-07-25 8:36 ` Boris BREZILLON
2014-07-25 8:50 ` Alexandre Belloni
2014-07-25 8:37 ` Jiří Prchal
2014-07-25 8:54 ` Alexandre Belloni
2014-07-25 8:59 ` Jiří Prchal
2014-07-25 9:02 ` Alexandre Belloni
2014-07-25 9:10 ` Boris BREZILLON
2014-07-25 9:40 ` Jiří Prchal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53D21B3F.7060006@aksignal.cz \
--to=jiri.prchal@aksignal.cz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).