From: jiri.prchal@aksignal.cz (Jiří Prchal)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: at91: at91sam9x5: sets NPCS0 (PA14) back to GPIO
Date: Fri, 25 Jul 2014 12:06:30 +0200 [thread overview]
Message-ID: <53D22C26.4030208@aksignal.cz> (raw)
In-Reply-To: <20140725113110.70c4aa41@bbrezillon>
Dne 25.7.2014 v 11:31 Boris BREZILLON napsal(a):
> On Fri, 25 Jul 2014 11:13:51 +0200
> Ji?? Prchal <jiri.prchal@aksignal.cz> wrote:
>
>
>>>
>>> Every thing seems in place.
>>> Could you enable CONFIG_DEBUG_PINCTRL and grep on "enable pin" ?
>> / # dmesg | grep "enable pin"
>> [ 0.968750] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 101 as GPIO
>> [ 0.968750] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 101 as PIOD5 0x20
>> [ 0.968750] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 100 as GPIO
>> [ 0.968750] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 100 as PIOD4 0x10
>> [ 1.238281] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 23 as GPIO
>> [ 1.238281] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 23 as PIOA23 0x800000
>> [ 1.238281] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 22 as GPIO
>> [ 1.238281] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 22 as PIOA22 0x400000
>> [ 1.242187] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 93 as GPIO
>> [ 1.242187] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 93 as PIOC29 0x20000000
>> [ 1.246093] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 14 as GPIO
>> [ 1.246093] pinctrl-at91 ahb:apb:pinctrl at fffff400: enable pin 14 as PIOA14 0x4000
>
>
> Okay, this cleary shows that PA14 pin is muxed as a GPIO (or at least
> the driver think it is).
>
>
> Could you launch these commands (you'll need the devmem tool) and
> paste the results ?
>
> #devmem 0xfffff408
> #devmem 0xfffff418
> #devmem 0xfffff438
> #devmem 0xfffff43c
> #devmem 0xfffff458
> #devmem 0xfffff468
> #devmem 0xfffff470
> #devmem 0xfffff474
> #devmem 0xfffff498
>
/ # devmem 0xfffff408
0xF0E04018
/ # devmem 0xfffff418
0xE0C04000
/ # devmem 0xfffff438
0x00C04000
/ # devmem 0xfffff43c
0x13FFD7FB
/ # devmem 0xfffff458
0x00000000
/ # devmem 0xfffff468
0xFF223B4E
/ # devmem 0xfffff470
0x0F000000
/ # devmem 0xfffff474
0x00000000
/ # devmem 0xfffff498
0xFFFFFFFF
I get thought if is possible that in time of probe fm25 (it's first) is not configured PA14 (it 's last)?
next prev parent reply other threads:[~2014-07-25 10:06 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-11 10:22 [PATCH] ARM: at91: at91sam9x5: add clocks for usb device Bo Shen
2014-07-11 10:47 ` Alexandre Belloni
2014-07-11 10:55 ` Jiří Prchal
2014-07-24 13:38 ` [PATCH] ARM: at91: at91sam9x5: sets NPCS0 (PA14) back to GPIO Jiří Prchal
2014-07-24 14:26 ` Boris BREZILLON
2014-07-24 15:06 ` Jiří Prchal
2014-07-24 15:58 ` Boris BREZILLON
2014-07-25 6:14 ` Jiří Prchal
2014-07-25 7:53 ` Boris BREZILLON
2014-07-25 8:27 ` Jiří Prchal
2014-07-25 8:45 ` Boris BREZILLON
2014-07-25 8:54 ` Jiří Prchal
2014-07-25 9:01 ` Boris BREZILLON
2014-07-25 9:13 ` Jiří Prchal
2014-07-25 9:31 ` Boris BREZILLON
2014-07-25 10:06 ` Jiří Prchal [this message]
2014-07-25 10:18 ` Boris BREZILLON
2014-07-25 10:32 ` Jiří Prchal
2014-07-25 11:34 ` Boris BREZILLON
2014-07-25 8:33 ` Jiří Prchal
2014-07-25 8:30 ` Alexandre Belloni
2014-07-25 8:36 ` Boris BREZILLON
2014-07-25 8:50 ` Alexandre Belloni
2014-07-25 8:37 ` Jiří Prchal
2014-07-25 8:54 ` Alexandre Belloni
2014-07-25 8:59 ` Jiří Prchal
2014-07-25 9:02 ` Alexandre Belloni
2014-07-25 9:10 ` Boris BREZILLON
2014-07-25 9:40 ` Jiří Prchal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53D22C26.4030208@aksignal.cz \
--to=jiri.prchal@aksignal.cz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).