* [PATCH 0/2] ARM: berlin: let RESET_CONTROLLER be user-selectable
@ 2014-11-17 13:33 Antoine Tenart
2014-11-17 13:33 ` [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER Antoine Tenart
2014-11-17 13:33 ` [PATCH 2/2] ARM: berlin: do not select RESET_CONTROLLER Antoine Tenart
0 siblings, 2 replies; 9+ messages in thread
From: Antoine Tenart @ 2014-11-17 13:33 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
As asked by Arnd in the Berlin USB thread[1], do not select automatically
RESET_CONTROLLER when using ARCH_BERLIN but let it be user-selectable.
To ensure the Berlin USB PHY driver still works with this change, make it
depending on RESET_CONTROLLER.
Antoine
[1] https://lkml.org/lkml/2014/11/14/415
Antoine Tenart (2):
phy: berlin_usb: depends on RESET_CONTROLLER
ARM: berlin: do not select RESET_CONTROLLER
arch/arm/mach-berlin/Kconfig | 1 -
drivers/phy/Kconfig | 2 +-
2 files changed, 1 insertion(+), 2 deletions(-)
--
2.1.0
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER
2014-11-17 13:33 [PATCH 0/2] ARM: berlin: let RESET_CONTROLLER be user-selectable Antoine Tenart
@ 2014-11-17 13:33 ` Antoine Tenart
2014-11-18 19:39 ` Sebastian Hesselbarth
2014-11-17 13:33 ` [PATCH 2/2] ARM: berlin: do not select RESET_CONTROLLER Antoine Tenart
1 sibling, 1 reply; 9+ messages in thread
From: Antoine Tenart @ 2014-11-17 13:33 UTC (permalink / raw)
To: linux-arm-kernel
The Berlin USB PHY driver uses the Berlin reset controller
unconditionally. Make it depending on RESET_CONTROLLER.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
drivers/phy/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index b6da75f563e7..38ca6ff00aef 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -17,7 +17,7 @@ config GENERIC_PHY
config PHY_BERLIN_USB
tristate "Marvell Berlin USB PHY Driver"
- depends on ARCH_BERLIN && HAS_IOMEM && OF
+ depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
select GENERIC_PHY
help
Enable this to support the USB PHY on Marvell Berlin SoCs.
--
2.1.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/2] ARM: berlin: do not select RESET_CONTROLLER
2014-11-17 13:33 [PATCH 0/2] ARM: berlin: let RESET_CONTROLLER be user-selectable Antoine Tenart
2014-11-17 13:33 ` [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER Antoine Tenart
@ 2014-11-17 13:33 ` Antoine Tenart
2014-11-18 19:28 ` Sebastian Hesselbarth
1 sibling, 1 reply; 9+ messages in thread
From: Antoine Tenart @ 2014-11-17 13:33 UTC (permalink / raw)
To: linux-arm-kernel
RESET_CONTROLLER is meant to be user-selectable. To respect that,
do not select it automatically when using ARCH_BERLIN.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
arch/arm/mach-berlin/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
index 5803f773a065..51582c73a53f 100644
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@@ -7,7 +7,6 @@ menuconfig ARCH_BERLIN
select DW_APB_ICTL
select DW_APB_TIMER_OF
select PINCTRL
- select RESET_CONTROLLER
if ARCH_BERLIN
--
2.1.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/2] ARM: berlin: do not select RESET_CONTROLLER
2014-11-17 13:33 ` [PATCH 2/2] ARM: berlin: do not select RESET_CONTROLLER Antoine Tenart
@ 2014-11-18 19:28 ` Sebastian Hesselbarth
0 siblings, 0 replies; 9+ messages in thread
From: Sebastian Hesselbarth @ 2014-11-18 19:28 UTC (permalink / raw)
To: linux-arm-kernel
On 17.11.2014 14:33, Antoine Tenart wrote:
> RESET_CONTROLLER is meant to be user-selectable. To respect that,
> do not select it automatically when using ARCH_BERLIN.
>
> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Applied to berlin/soc.
Thanks!
> ---
> arch/arm/mach-berlin/Kconfig | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
> index 5803f773a065..51582c73a53f 100644
> --- a/arch/arm/mach-berlin/Kconfig
> +++ b/arch/arm/mach-berlin/Kconfig
> @@ -7,7 +7,6 @@ menuconfig ARCH_BERLIN
> select DW_APB_ICTL
> select DW_APB_TIMER_OF
> select PINCTRL
> - select RESET_CONTROLLER
>
> if ARCH_BERLIN
>
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER
2014-11-17 13:33 ` [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER Antoine Tenart
@ 2014-11-18 19:39 ` Sebastian Hesselbarth
2014-11-19 6:09 ` Kishon Vijay Abraham I
0 siblings, 1 reply; 9+ messages in thread
From: Sebastian Hesselbarth @ 2014-11-18 19:39 UTC (permalink / raw)
To: linux-arm-kernel
On 17.11.2014 14:33, Antoine Tenart wrote:
> The Berlin USB PHY driver uses the Berlin reset controller
> unconditionally. Make it depending on RESET_CONTROLLER.
>
> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> ---
> drivers/phy/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index b6da75f563e7..38ca6ff00aef 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -17,7 +17,7 @@ config GENERIC_PHY
>
> config PHY_BERLIN_USB
> tristate "Marvell Berlin USB PHY Driver"
> - depends on ARCH_BERLIN && HAS_IOMEM && OF
> + depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
> select GENERIC_PHY
> help
> Enable this to support the USB PHY on Marvell Berlin SoCs.
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER
2014-11-18 19:39 ` Sebastian Hesselbarth
@ 2014-11-19 6:09 ` Kishon Vijay Abraham I
2014-11-20 21:46 ` Sebastian Hesselbarth
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Kishon Vijay Abraham I @ 2014-11-19 6:09 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Wednesday 19 November 2014 01:09 AM, Sebastian Hesselbarth wrote:
> On 17.11.2014 14:33, Antoine Tenart wrote:
>> The Berlin USB PHY driver uses the Berlin reset controller
>> unconditionally. Make it depending on RESET_CONTROLLER.
>>
>> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
>
> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
>
>> ---
>> drivers/phy/Kconfig | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>> index b6da75f563e7..38ca6ff00aef 100644
>> --- a/drivers/phy/Kconfig
>> +++ b/drivers/phy/Kconfig
>> @@ -17,7 +17,7 @@ config GENERIC_PHY
>>
>> config PHY_BERLIN_USB
phy-berlin-usb is not in my phy tree and I don't seem to find anywhere in my
inbox. Care to send them to me?
Thanks
Kishon
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER
2014-11-19 6:09 ` Kishon Vijay Abraham I
@ 2014-11-20 21:46 ` Sebastian Hesselbarth
2014-11-20 21:55 ` Sebastian Hesselbarth
2014-11-20 21:59 ` Sebastian Hesselbarth
2 siblings, 0 replies; 9+ messages in thread
From: Sebastian Hesselbarth @ 2014-11-20 21:46 UTC (permalink / raw)
To: linux-arm-kernel
On 11/19/2014 07:09 AM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Wednesday 19 November 2014 01:09 AM, Sebastian Hesselbarth wrote:
>> On 17.11.2014 14:33, Antoine Tenart wrote:
>>> The Berlin USB PHY driver uses the Berlin reset controller
>>> unconditionally. Make it depending on RESET_CONTROLLER.
>>>
>>> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
>>
>> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
>>
>>> ---
>>> drivers/phy/Kconfig | 2 +-
>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>>> index b6da75f563e7..38ca6ff00aef 100644
>>> --- a/drivers/phy/Kconfig
>>> +++ b/drivers/phy/Kconfig
>>> @@ -17,7 +17,7 @@ config GENERIC_PHY
>>>
>>> config PHY_BERLIN_USB
>
> phy-berlin-usb is not in my phy tree and I don't seem to find anywhere in my
> inbox. Care to send them to me?
Kishon,
phy-berlin-usb has been part of chipidea generic phy patch set for
a while now. It looks like Antoine simply forgot to put you on Cc
at least for v8 of it.
As all other patches of that patch set have already been taken,
I'll squash this patch into the two remaining ones from Antoine
and send phy-berlin-usb patches in a second.
Sebastian
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER
2014-11-19 6:09 ` Kishon Vijay Abraham I
2014-11-20 21:46 ` Sebastian Hesselbarth
@ 2014-11-20 21:55 ` Sebastian Hesselbarth
2014-11-20 21:59 ` Sebastian Hesselbarth
2 siblings, 0 replies; 9+ messages in thread
From: Sebastian Hesselbarth @ 2014-11-20 21:55 UTC (permalink / raw)
To: linux-arm-kernel
On 11/19/2014 07:09 AM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Wednesday 19 November 2014 01:09 AM, Sebastian Hesselbarth wrote:
>> On 17.11.2014 14:33, Antoine Tenart wrote:
>>> The Berlin USB PHY driver uses the Berlin reset controller
>>> unconditionally. Make it depending on RESET_CONTROLLER.
>>>
>>> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
>>
>> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
>>
>>> ---
>>> drivers/phy/Kconfig | 2 +-
>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>>> index b6da75f563e7..38ca6ff00aef 100644
>>> --- a/drivers/phy/Kconfig
>>> +++ b/drivers/phy/Kconfig
>>> @@ -17,7 +17,7 @@ config GENERIC_PHY
>>>
>>> config PHY_BERLIN_USB
>
> phy-berlin-usb is not in my phy tree and I don't seem to find anywhere in my
> inbox. Care to send them to me?
Kishon,
phy-berlin-usb has been part of chipidea generic phy patch set for
a while now. It looks like Antoine simply forgot to put you on Cc
at least for v8 of it.
As all other patches of that patch set have already been taken,
I'll squash this patch into the two remaining ones from Antoine
and send phy-berlin-usb patches in a second.
Sebastian
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER
2014-11-19 6:09 ` Kishon Vijay Abraham I
2014-11-20 21:46 ` Sebastian Hesselbarth
2014-11-20 21:55 ` Sebastian Hesselbarth
@ 2014-11-20 21:59 ` Sebastian Hesselbarth
2 siblings, 0 replies; 9+ messages in thread
From: Sebastian Hesselbarth @ 2014-11-20 21:59 UTC (permalink / raw)
To: linux-arm-kernel
On 11/19/2014 07:09 AM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Wednesday 19 November 2014 01:09 AM, Sebastian Hesselbarth wrote:
>> On 17.11.2014 14:33, Antoine Tenart wrote:
>>> The Berlin USB PHY driver uses the Berlin reset controller
>>> unconditionally. Make it depending on RESET_CONTROLLER.
>>>
>>> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
>>
>> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
>>
>>> ---
>>> drivers/phy/Kconfig | 2 +-
>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>>> index b6da75f563e7..38ca6ff00aef 100644
>>> --- a/drivers/phy/Kconfig
>>> +++ b/drivers/phy/Kconfig
>>> @@ -17,7 +17,7 @@ config GENERIC_PHY
>>>
>>> config PHY_BERLIN_USB
>
> phy-berlin-usb is not in my phy tree and I don't seem to find anywhere in my
> inbox. Care to send them to me?
Kishon,
phy-berlin-usb is part of a larger patch set moving chipidea usb to
generic phy. As all other patches of that set have already been taken,
I squashed this into one of the two remaining patches from the said
set. I just sent out the now two remaining patches.
Looks like Antoine simply forgot to put you on Cc, at least for v8
of the patches.
Sebastian
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2014-11-20 21:59 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-11-17 13:33 [PATCH 0/2] ARM: berlin: let RESET_CONTROLLER be user-selectable Antoine Tenart
2014-11-17 13:33 ` [PATCH 1/2] phy: berlin_usb: depends on RESET_CONTROLLER Antoine Tenart
2014-11-18 19:39 ` Sebastian Hesselbarth
2014-11-19 6:09 ` Kishon Vijay Abraham I
2014-11-20 21:46 ` Sebastian Hesselbarth
2014-11-20 21:55 ` Sebastian Hesselbarth
2014-11-20 21:59 ` Sebastian Hesselbarth
2014-11-17 13:33 ` [PATCH 2/2] ARM: berlin: do not select RESET_CONTROLLER Antoine Tenart
2014-11-18 19:28 ` Sebastian Hesselbarth
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).