linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/7] irqchip: armada-370-xp: Initialize per cpu registers when CONFIG_SMP=N
Date: Tue, 03 Mar 2015 19:29:29 +0100	[thread overview]
Message-ID: <54F5FD89.4080905@free-electrons.com> (raw)
In-Reply-To: <1425379400-4346-2-git-send-email-maxime.ripard@free-electrons.com>

Hi Maxime,

On 03/03/2015 11:43, Maxime Ripard wrote:
> From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
> 
> The irqchip driver called armada_xp_mpic_smp_cpu_init() when CONFIG_SMP=Y
> to initialize some per cpu registers. The function is called on each
> CPU by calling it explicitly on the boot CPU and then using a CPU notifier
> for the non boot CPUs.
> 
> This commit removes the CONFIG_SMP constrain, so the per cpu registers are
> also initialized when CONFIG_SMP=N, which is the right thing to do.
> 
> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---

Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>


Thanks,

Gregory

>  drivers/irqchip/irq-armada-370-xp.c | 47 ++++++++++++++++++-------------------
>  1 file changed, 23 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
> index 4387dae14e45..b455c876974e 100644
> --- a/drivers/irqchip/irq-armada-370-xp.c
> +++ b/drivers/irqchip/irq-armada-370-xp.c
> @@ -308,28 +308,6 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
>  	return 0;
>  }
>  
> -#ifdef CONFIG_SMP
> -static void armada_mpic_send_doorbell(const struct cpumask *mask,
> -				      unsigned int irq)
> -{
> -	int cpu;
> -	unsigned long map = 0;
> -
> -	/* Convert our logical CPU mask into a physical one. */
> -	for_each_cpu(cpu, mask)
> -		map |= 1 << cpu_logical_map(cpu);
> -
> -	/*
> -	 * Ensure that stores to Normal memory are visible to the
> -	 * other CPUs before issuing the IPI.
> -	 */
> -	dsb();
> -
> -	/* submit softirq */
> -	writel((map << 8) | irq, main_int_base +
> -		ARMADA_370_XP_SW_TRIG_INT_OFFS);
> -}
> -
>  static void armada_xp_mpic_smp_cpu_init(void)
>  {
>  	u32 control;
> @@ -352,6 +330,28 @@ static void armada_xp_mpic_smp_cpu_init(void)
>  	writel(0, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
>  }
>  
> +#ifdef CONFIG_SMP
> +static void armada_mpic_send_doorbell(const struct cpumask *mask,
> +				      unsigned int irq)
> +{
> +	int cpu;
> +	unsigned long map = 0;
> +
> +	/* Convert our logical CPU mask into a physical one. */
> +	for_each_cpu(cpu, mask)
> +		map |= 1 << cpu_logical_map(cpu);
> +
> +	/*
> +	 * Ensure that stores to Normal memory are visible to the
> +	 * other CPUs before issuing the IPI.
> +	 */
> +	dsb();
> +
> +	/* submit softirq */
> +	writel((map << 8) | irq, main_int_base +
> +		ARMADA_370_XP_SW_TRIG_INT_OFFS);
> +}
> +
>  static int armada_xp_mpic_secondary_init(struct notifier_block *nfb,
>  					 unsigned long action, void *hcpu)
>  {
> @@ -588,9 +588,8 @@ static int __init armada_370_xp_mpic_of_init(struct device_node *node,
>  
>  	BUG_ON(!armada_370_xp_mpic_domain);
>  
> -#ifdef CONFIG_SMP
> +	/* Setup for the boot CPU */
>  	armada_xp_mpic_smp_cpu_init();
> -#endif
>  
>  	armada_370_xp_msi_init(node, main_int_res.start);
>  
> 


-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

  reply	other threads:[~2015-03-03 18:29 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-03 10:43 [PATCH v2 0/7] ARM: mvebu: Enable perf support Maxime Ripard
2015-03-03 10:43 ` [PATCH v2 1/7] irqchip: armada-370-xp: Initialize per cpu registers when CONFIG_SMP=N Maxime Ripard
2015-03-03 18:29   ` Gregory CLEMENT [this message]
2015-03-03 10:43 ` [PATCH v2 2/7] irqchip: armada-370-xp: Introduce a is_percpu_irq() helper for readability Maxime Ripard
2015-03-03 18:34   ` Gregory CLEMENT
2015-03-03 10:43 ` [PATCH v2 3/7] irqchip: armada-370-xp: Enable the PMU interrupts Maxime Ripard
2015-03-03 18:38   ` Gregory CLEMENT
2015-03-03 10:43 ` [PATCH v2 4/7] ARM: mvebu: Enable Performance Monitor Unit on Armada XP/370 SoCs Maxime Ripard
2015-03-03 18:56   ` Gregory CLEMENT
2015-03-03 10:43 ` [PATCH v2 5/7] ARM: mvebu: Enable Performance Monitor Unit on Armada 375 SoC Maxime Ripard
2015-03-03 18:54   ` Gregory CLEMENT
2015-03-03 10:43 ` [PATCH v2 6/7] ARM: mvebu: Enable Performance Monitor Unit on Armada 380/385 SoC Maxime Ripard
2015-03-03 18:54   ` Gregory CLEMENT
2015-03-03 10:43 ` [PATCH v2 7/7] ARM: mvebu: Enable perf support in mvebu_v7_defconfig Maxime Ripard
2015-03-03 18:57   ` Gregory CLEMENT
2015-03-08  5:38 ` [PATCH v2 0/7] ARM: mvebu: Enable perf support Jason Cooper
2015-03-17  9:10 ` Gregory CLEMENT

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54F5FD89.4080905@free-electrons.com \
    --to=gregory.clement@free-electrons.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).