From: srinivas.kandagatla@linaro.org (Srinivas Kandagatla)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 5/6] eeprom: qfprom: Add Qualcomm QFPROM support.
Date: Thu, 05 Mar 2015 10:10:48 +0000 [thread overview]
Message-ID: <54F82BA8.80803@linaro.org> (raw)
In-Reply-To: <1425549757.24292.204.camel@x220>
Thankyou for the comments,
On 05/03/15 10:02, Paul Bolle wrote:
> On Thu, 2015-03-05 at 09:46 +0000, Srinivas Kandagatla wrote:
>> diff --git a/drivers/eeprom/Kconfig b/drivers/eeprom/Kconfig
>> index bff8ecb..65325c7 100644
>> --- a/drivers/eeprom/Kconfig
>> +++ b/drivers/eeprom/Kconfig
>> @@ -28,4 +28,11 @@ config EEPROM_SUNXI_SID
>> This driver can also be built as a module. If so, the module
>> will be called sunxi_sid.
>>
>> +config QCOM_QFPROM
>> + tristate "QCOM QFPROM Support"
>> + depends on EEPROM
>
> Make this one tab, please.
>
>> + select REGMAP_MMIO
>> + help
>> + Say y here to enable QFPROM support. The QFPROM provides access
>> + functions for QFPROM data to rest of the drivers via eeprom interface.
>
> And this one tab and two spaces, please.
>
> All utterly trivial, of course, but I found a less trivial problem with
> this patch, so I included these two comments anyway.
>
Will fix it in next version.
>> endif
>> diff --git a/drivers/eeprom/Makefile b/drivers/eeprom/Makefile
>> index 661422c..f99c824 100644
>> --- a/drivers/eeprom/Makefile
>> +++ b/drivers/eeprom/Makefile
>> @@ -8,3 +8,4 @@ obj-$(CONFIG_EEPROM) += core.o
>>
>> # Devices
>> obj-$(CONFIG_EEPROM_SUNXI_SID) += eeprom-sunxi-sid.o
>> +obj-$(CONFIG_QCOM_QFPROM) += qfprom.o
>> diff --git a/drivers/eeprom/qfprom.c b/drivers/eeprom/qfprom.c
>> new file mode 100644
>> index 0000000..371a8c0
>> --- /dev/null
>> +++ b/drivers/eeprom/qfprom.c
>> @@ -0,0 +1,74 @@
>> +#include <linux/device.h>
>> +#include <linux/module.h>
>> +#include <linux/err.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/eeprom-provider.h>
>
> [...]
>
>> +MODULE_LICENSE("GPL2");
>
> This will taint the kernel on module load. I guess you meant
> MODULE_LICENSE("GPL v2");
>
> but there's no comment with some lines about the license at the top of
> this file, so I can't be sure.
>
Yes, I meant GPL v2, and will fix the license header too in next version.
--srini
>
> Paul Bolle
>
> (Chances are that by the end of this week everybody is so tired of
> messages like this that people actually check this stuff before
> submitting, and there's no need to review this anymore for the rest of
> this year. That would be mission accomplished, I guess.)
>
next prev parent reply other threads:[~2015-03-05 10:10 UTC|newest]
Thread overview: 153+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-19 17:07 [RFC PATCH 0/3] Add simple EEPROM Framework via regmap Srinivas Kandagatla
2015-02-19 17:08 ` [RFC PATCH 1/3] eeprom: Add a simple EEPROM framework Srinivas Kandagatla
2015-02-19 18:12 ` Andrew Lunn
2015-02-20 8:27 ` Srinivas Kandagatla
2015-02-20 2:36 ` Stephen Boyd
2015-02-20 8:14 ` Srinivas Kandagatla
2015-02-20 10:24 ` Srinivas Kandagatla
2015-02-20 17:21 ` Rob Herring
2015-02-20 19:25 ` Srinivas Kandagatla
2015-02-20 22:01 ` Rob Herring
2015-02-21 11:31 ` Srinivas Kandagatla
2015-02-22 14:34 ` Maxime Ripard
2015-02-22 14:32 ` Maxime Ripard
2015-02-23 0:57 ` Rob Herring
2015-02-23 23:11 ` Stephen Boyd
2015-02-24 7:08 ` Srinivas Kandagatla
2015-02-24 9:21 ` Maxime Ripard
2015-02-25 1:30 ` Stephen Boyd
2015-02-26 9:16 ` Srinivas Kandagatla
2015-02-26 13:21 ` Maxime Ripard
2015-02-26 14:56 ` Srinivas Kandagatla
2015-02-26 13:18 ` Maxime Ripard
2015-02-23 9:15 ` Sascha Hauer
2015-02-20 17:46 ` Russell King - ARM Linux
2015-02-20 19:00 ` Srinivas Kandagatla
2015-02-23 15:04 ` Mark Brown
2015-02-23 15:38 ` Srinivas Kandagatla
2015-02-19 17:08 ` [RFC PATCH 2/3] eeprom: sunxi: Move the SID driver to the eeprom framework Srinivas Kandagatla
2015-02-20 17:47 ` Russell King - ARM Linux
2015-02-19 17:08 ` [RFC PATCH 3/3] eeprom: qfprom: Add Qualcomm QFPROM support Srinivas Kandagatla
2015-02-20 17:48 ` Russell King - ARM Linux
2015-03-05 9:44 ` [PATCH v1 0/6] Add simple EEPROM Framework via regmap Srinivas Kandagatla
2015-03-05 9:45 ` [PATCH v1 1/6] eeprom: Add a simple EEPROM framework for eeprom providers Srinivas Kandagatla
2015-03-05 10:23 ` Paul Bolle
2015-03-05 10:35 ` Srinivas Kandagatla
2015-03-07 15:00 ` Mark Brown
2015-03-09 7:13 ` Srinivas Kandagatla
2015-03-05 9:45 ` [PATCH v1 2/6] eeprom: Add a simple EEPROM framework for eeprom consumers Srinivas Kandagatla
2015-03-05 9:46 ` [PATCH v1 3/6] eeprom: Add bindings for simple eeprom framework Srinivas Kandagatla
2015-03-05 20:11 ` Rob Herring
2015-03-05 22:34 ` Srinivas Kandagatla
2015-03-05 9:46 ` [PATCH v1 4/6] eeprom: sunxi: Move the SID driver to the " Srinivas Kandagatla
2015-03-05 10:15 ` Paul Bolle
2015-03-05 18:36 ` Maxime Ripard
2015-03-05 9:46 ` [PATCH v1 5/6] eeprom: qfprom: Add Qualcomm QFPROM support Srinivas Kandagatla
2015-03-05 10:02 ` Paul Bolle
2015-03-05 10:10 ` Srinivas Kandagatla [this message]
2015-03-05 9:46 ` [PATCH v1 6/6] eeprom: Add to MAINTAINERS for eeprom framework Srinivas Kandagatla
2015-03-13 9:49 ` [PATCH v2 0/7] Add simple EEPROM Framework via regmap Srinivas Kandagatla
2015-03-13 9:50 ` [PATCH v2 1/7] eeprom: Add a simple EEPROM framework for eeprom providers Srinivas Kandagatla
2015-03-23 21:09 ` Mark Brown
2015-03-23 22:05 ` Srinivas Kandagatla
2015-03-24 9:18 ` Srinivas Kandagatla
2015-03-24 17:23 ` Mark Brown
2015-03-24 18:34 ` Srinivas Kandagatla
2015-03-24 19:02 ` Mark Brown
2015-03-24 19:26 ` Srinivas Kandagatla
2015-03-24 20:55 ` Mark Brown
2015-03-13 9:50 ` [PATCH v2 2/7] eeprom: Add a simple EEPROM framework for eeprom consumers Srinivas Kandagatla
2015-03-13 9:50 ` [PATCH v2 3/7] eeprom: Add bindings for simple eeprom framework Srinivas Kandagatla
2015-03-13 9:50 ` [PATCH v2 4/7] eeprom: sunxi: Move the SID driver to the " Srinivas Kandagatla
2015-03-13 9:50 ` [PATCH v2 5/7] eeprom: qfprom: Add Qualcomm QFPROM support Srinivas Kandagatla
2015-03-13 9:50 ` [PATCH v2 6/7] eeprom: qfprom: Add bindings for qfprom Srinivas Kandagatla
2015-03-13 9:51 ` [PATCH v2 7/7] eeprom: Add to MAINTAINERS for eeprom framework Srinivas Kandagatla
2015-03-24 22:28 ` [PATCH v3 0/9] Add simple EEPROM Framework via regmap Srinivas Kandagatla
2015-03-24 22:29 ` [PATCH v3 1/9] regmap: Introduce regmap_get_max_register Srinivas Kandagatla
2015-03-24 22:36 ` Mark Brown
2015-03-24 23:05 ` Srinivas Kandagatla
2015-03-24 23:23 ` Joe Perches
2015-03-24 22:30 ` [PATCH v3 2/9] regmap: Introduce regmap_get_reg_stride Srinivas Kandagatla
2015-03-24 22:37 ` Mark Brown
2015-03-24 23:07 ` Srinivas Kandagatla
2015-03-24 22:30 ` [PATCH v3 3/9] eeprom: Add a simple EEPROM framework for eeprom providers Srinivas Kandagatla
2015-03-24 22:53 ` Mark Brown
2015-03-26 16:23 ` Srinivas Kandagatla
2015-03-24 22:30 ` [PATCH v3 4/9] eeprom: Add a simple EEPROM framework for eeprom consumers Srinivas Kandagatla
2015-03-25 7:16 ` Sascha Hauer
2015-03-25 12:29 ` Srinivas Kandagatla
2015-03-24 22:30 ` [PATCH v3 5/9] eeprom: Add bindings for simple eeprom framework Srinivas Kandagatla
2015-03-25 7:10 ` Sascha Hauer
2015-03-25 16:40 ` Maxime Ripard
2015-03-24 22:30 ` [PATCH v3 6/9] eeprom: sunxi: Move the SID driver to the " Srinivas Kandagatla
2015-03-24 22:30 ` [PATCH v3 7/9] eeprom: qfprom: Add Qualcomm QFPROM support Srinivas Kandagatla
2015-03-24 22:31 ` [PATCH v3 8/9] eeprom: qfprom: Add bindings for qfprom Srinivas Kandagatla
2015-03-25 0:28 ` Bjorn Andersson
2015-03-24 22:31 ` [PATCH v3 9/9] eeprom: Add to MAINTAINERS for eeprom framework Srinivas Kandagatla
2015-03-30 21:54 ` [PATCH v4 00/10] Add simple EEPROM Framework via regmap Srinivas Kandagatla
2015-03-30 21:56 ` [PATCH v4 01/10] regmap: Introduce regmap_get_max_register Srinivas Kandagatla
2015-05-04 12:05 ` Mark Brown
2015-03-30 21:57 ` [PATCH v4 02/10] regmap: Introduce regmap_get_reg_stride Srinivas Kandagatla
2015-03-30 21:57 ` [PATCH v4 03/10] eeprom: Add a simple EEPROM framework for eeprom providers Srinivas Kandagatla
2015-03-30 21:57 ` [PATCH v4 04/10] eeprom: Add a simple EEPROM framework for eeprom consumers Srinivas Kandagatla
2015-04-07 18:45 ` Stephen Boyd
2015-04-07 20:09 ` Srinivas Kandagatla
2015-04-09 14:45 ` Stephen Boyd
2015-04-10 11:45 ` Maxime Ripard
2015-05-05 11:46 ` Srinivas Kandagatla
2015-05-08 5:23 ` Sascha Hauer
2015-05-06 17:28 ` Mark Brown
2015-03-30 21:57 ` [PATCH v4 05/10] eeprom: Add bindings for simple eeprom framework Srinivas Kandagatla
2015-04-06 13:32 ` Matt Porter
2015-04-06 14:11 ` Rob Herring
2015-04-06 15:04 ` Matt Porter
2015-04-07 17:35 ` Srinivas Kandagatla
2015-04-07 17:46 ` Mark Brown
2015-04-07 18:03 ` Srinivas Kandagatla
2015-04-07 19:46 ` Matt Porter
2015-04-08 9:24 ` Srinivas Kandagatla
2015-03-30 21:58 ` [PATCH v4 06/10] eeprom: Add simple eeprom-mmio consumer helper functions Srinivas Kandagatla
2015-03-30 21:58 ` [PATCH v4 07/10] eeprom: qfprom: Add Qualcomm QFPROM support Srinivas Kandagatla
2015-03-30 21:58 ` [PATCH v4 08/10] eeprom: qfprom: Add bindings for qfprom Srinivas Kandagatla
2015-03-30 21:58 ` [PATCH v4 09/10] eeprom: sunxi: Move the SID driver to the eeprom framework Srinivas Kandagatla
2015-03-30 21:58 ` [PATCH v4 10/10] eeprom: Add to MAINTAINERS for " Srinivas Kandagatla
2015-05-21 16:42 ` [PATCH v5 00/11] Add simple NVMEM Framework via regmap Srinivas Kandagatla
2015-05-21 16:42 ` [PATCH v5 01/11] regmap: Introduce regmap_get_max_register Srinivas Kandagatla
2015-05-22 11:18 ` Mark Brown
2015-05-21 16:42 ` [PATCH v5 02/11] regmap: Introduce regmap_get_reg_stride Srinivas Kandagatla
2015-05-22 11:19 ` Mark Brown
2015-05-21 16:43 ` [PATCH v5 03/11] nvmem: Add a simple NVMEM framework for nvmem providers Srinivas Kandagatla
2015-06-16 22:43 ` Stephen Boyd
2015-06-18 12:46 ` Srinivas Kandagatla
2015-06-24 0:24 ` Stephen Boyd
2015-06-24 10:05 ` Srinivas Kandagatla
2015-05-21 16:43 ` [PATCH v5 04/11] nvmem: Add a simple NVMEM framework for consumers Srinivas Kandagatla
2015-06-16 22:29 ` Stephen Boyd
2015-06-17 8:00 ` Sascha Hauer
2015-06-18 12:56 ` Srinivas Kandagatla
2015-05-21 16:43 ` [PATCH v5 05/11] nvmem: Add nvmem_device based consumer apis Srinivas Kandagatla
2015-06-16 22:49 ` Stephen Boyd
2015-06-18 12:57 ` Srinivas Kandagatla
2015-05-21 16:44 ` [PATCH v5 06/11] nvmem: Add bindings for simple nvmem framework Srinivas Kandagatla
2015-06-16 22:53 ` Stephen Boyd
2015-06-18 13:01 ` Srinivas Kandagatla
2015-06-19 10:36 ` maitysanchayan at gmail.com
2015-06-19 10:59 ` Srinivas Kandagatla
2015-05-21 16:44 ` [PATCH v5 07/11] nvmem: Add simple nvmem-mmio consumer helper functions Srinivas Kandagatla
2015-06-16 22:58 ` Stephen Boyd
2015-06-18 13:08 ` Srinivas Kandagatla
2015-05-21 16:44 ` [PATCH v5 08/11] nvmem: qfprom: Add Qualcomm QFPROM support Srinivas Kandagatla
2015-06-16 23:00 ` Stephen Boyd
2015-06-18 13:22 ` Srinivas Kandagatla
2015-05-21 16:44 ` [PATCH v5 09/11] nvmem: qfprom: Add bindings for qfprom Srinivas Kandagatla
2015-06-16 23:01 ` Stephen Boyd
2015-05-21 16:45 ` [PATCH v5 11/11] nvmem: Add to MAINTAINERS for nvmem framework Srinivas Kandagatla
2015-05-21 16:45 ` [PATCH v5 10/11] nvmem: sunxi: Move the SID driver to the " Srinivas Kandagatla
2015-06-16 23:04 ` Stephen Boyd
2015-06-18 13:09 ` Srinivas Kandagatla
2015-05-25 16:51 ` [PATCH v5 00/11] Add simple NVMEM Framework via regmap Pantelis Antoniou
2015-05-26 9:12 ` Srinivas Kandagatla
2015-05-26 17:54 ` Pantelis Antoniou
2015-05-29 1:20 ` Dan Williams
2015-05-29 7:09 ` Srinivas Kandagatla
2015-05-29 21:44 ` Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54F82BA8.80803@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).