[PATCH v3 06/79] media: exynos-gsc: don't resume at remove time

[PATCH v3 06/79] media: exynos-gsc: don't resume at remove time

[Mauro Carvalho Chehab]

Calling pm_runtime_get_sync() at driver's removal time is not
needed, as this will resume PM runtime. Also, the PM runtime
code at pm_runtime_disable() already calls it, if it detects
the need.

So, simplify the code by getting rid of that.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/exynos-gsc/gsc-core.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c
index 9f41c2e7097a..70e86cdc1012 100644
--- a/drivers/media/platform/exynos-gsc/gsc-core.c
+++ b/drivers/media/platform/exynos-gsc/gsc-core.c
@@ -1210,8 +1210,6 @@ static int gsc_remove(struct platform_device *pdev)
 	struct gsc_dev *gsc = platform_get_drvdata(pdev);
 	int i;
 
-	pm_runtime_get_sync(&pdev->dev);
-
 	gsc_unregister_m2m_device(gsc);
 	v4l2_device_unregister(&gsc->v4l2_dev);
 
@@ -1219,7 +1217,6 @@ static int gsc_remove(struct platform_device *pdev)
 	for (i = 0; i < gsc->num_clocks; i++)
 		clk_disable_unprepare(gsc->clock[i]);
 
-	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
 	dev_dbg(&pdev->dev, "%s driver unloaded\n", pdev->name);
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 06/79] media: exynos-gsc: don't resume at remove time

[Sylwester Nawrocki]

On 27.04.2021 12:25, Mauro Carvalho Chehab wrote:
> Calling pm_runtime_get_sync() at driver's removal time is not
> needed, as this will resume PM runtime. Also, the PM runtime
> code at pm_runtime_disable() already calls it, if it detects
> the need.
> 
> So, simplify the code by getting rid of that.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  drivers/media/platform/exynos-gsc/gsc-core.c | 3 ---
>  1 file changed, 3 deletions(-)
> 
> diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c
> index 9f41c2e7097a..70e86cdc1012 100644
> --- a/drivers/media/platform/exynos-gsc/gsc-core.c
> +++ b/drivers/media/platform/exynos-gsc/gsc-core.c
> @@ -1210,8 +1210,6 @@ static int gsc_remove(struct platform_device *pdev)
>  	struct gsc_dev *gsc = platform_get_drvdata(pdev);
>  	int i;
>  
> -	pm_runtime_get_sync(&pdev->dev);
> -
>  	gsc_unregister_m2m_device(gsc);
>  	v4l2_device_unregister(&gsc->v4l2_dev);
>  
> @@ -1219,7 +1217,6 @@ static int gsc_remove(struct platform_device *pdev)
>  	for (i = 0; i < gsc->num_clocks; i++)
>  		clk_disable_unprepare(gsc->clock[i]);
>  
> -	pm_runtime_put_noidle(&pdev->dev);
>  	pm_runtime_disable(&pdev->dev);

This will result in unbalanced clk_disable_unprepare() calls when 
the device is not runtime PM active at the time of gsc_remove() call. 
I think we need to first disable runtime PM for the device and then 
disable the clocks only when pm_runtime_status_suspended(&pdev->dev)
returns false.


Thanks,
Sylwester

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 07/79] media: atmel: properly get pm_runtime

[Mauro Carvalho Chehab]

There are several issues in the way the atmel driver handles
pm_runtime_get_sync():

- it doesn't check return codes;
- it doesn't properly decrement the usage_count on all places;
- it starts streaming even if pm_runtime_get_sync() fails.
- while it tries to get pm_runtime at the clock enable logic,
  it doesn't check if the operation was suceeded.

Replace all occurrences of it to use the new kAPI:
pm_runtime_resume_and_get(), which ensures that, if the
return code is not negative, the usage_count was incremented.

With that, add additional checks when this is called, in order
to ensure that errors will be properly addressed.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/atmel/atmel-isc-base.c | 27 ++++++++++++++-----
 drivers/media/platform/atmel/atmel-isi.c      | 19 ++++++++++---
 2 files changed, 35 insertions(+), 11 deletions(-)

diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
index fe3ec8d0eaee..02543fe42e9d 100644
--- a/drivers/media/platform/atmel/atmel-isc-base.c
+++ b/drivers/media/platform/atmel/atmel-isc-base.c
@@ -294,9 +294,13 @@ static int isc_wait_clk_stable(struct clk_hw *hw)
 static int isc_clk_prepare(struct clk_hw *hw)
 {
 	struct isc_clk *isc_clk = to_isc_clk(hw);
+	int ret;
 
-	if (isc_clk->id == ISC_ISPCK)
-		pm_runtime_get_sync(isc_clk->dev);
+	if (isc_clk->id == ISC_ISPCK) {
+		ret = pm_runtime_resume_and_get(isc_clk->dev);
+		if (ret < 0)
+			return 0;
+	}
 
 	return isc_wait_clk_stable(hw);
 }
@@ -353,9 +357,13 @@ static int isc_clk_is_enabled(struct clk_hw *hw)
 {
 	struct isc_clk *isc_clk = to_isc_clk(hw);
 	u32 status;
+	int ret;
 
-	if (isc_clk->id == ISC_ISPCK)
-		pm_runtime_get_sync(isc_clk->dev);
+	if (isc_clk->id == ISC_ISPCK) {
+		ret = pm_runtime_resume_and_get(isc_clk->dev);
+		if (ret < 0)
+			return 0;
+	}
 
 	regmap_read(isc_clk->regmap, ISC_CLKSR, &status);
 
@@ -807,7 +815,9 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
 		goto err_start_stream;
 	}
 
-	pm_runtime_get_sync(isc->dev);
+	ret = pm_runtime_resume_and_get(isc->dev);
+	if (ret < 0)
+		goto err_pm_get;
 
 	ret = isc_configure(isc);
 	if (unlikely(ret))
@@ -838,7 +848,7 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
 
 err_configure:
 	pm_runtime_put_sync(isc->dev);
-
+err_pm_get:
 	v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 0);
 
 err_start_stream:
@@ -1809,6 +1819,7 @@ static void isc_awb_work(struct work_struct *w)
 	u32 baysel;
 	unsigned long flags;
 	u32 min, max;
+	int ret;
 
 	/* streaming is not active anymore */
 	if (isc->stop)
@@ -1831,7 +1842,9 @@ static void isc_awb_work(struct work_struct *w)
 	ctrls->hist_id = hist_id;
 	baysel = isc->config.sd_format->cfa_baycfg << ISC_HIS_CFG_BAYSEL_SHIFT;
 
-	pm_runtime_get_sync(isc->dev);
+	ret = pm_runtime_resume_and_get(isc->dev);
+	if (ret < 0)
+		return;
 
 	/*
 	 * only update if we have all the required histograms and controls
diff --git a/drivers/media/platform/atmel/atmel-isi.c b/drivers/media/platform/atmel/atmel-isi.c
index 0514be6153df..6a433926726d 100644
--- a/drivers/media/platform/atmel/atmel-isi.c
+++ b/drivers/media/platform/atmel/atmel-isi.c
@@ -422,7 +422,9 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)
 	struct frame_buffer *buf, *node;
 	int ret;
 
-	pm_runtime_get_sync(isi->dev);
+	ret = pm_runtime_resume_and_get(isi->dev);
+	if (ret < 0)
+		return ret;
 
 	/* Enable stream on the sub device */
 	ret = v4l2_subdev_call(isi->entity.subdev, video, s_stream, 1);
@@ -782,9 +784,10 @@ static int isi_enum_frameintervals(struct file *file, void *fh,
 	return 0;
 }
 
-static void isi_camera_set_bus_param(struct atmel_isi *isi)
+static int isi_camera_set_bus_param(struct atmel_isi *isi)
 {
 	u32 cfg1 = 0;
+	int ret;
 
 	/* set bus param for ISI */
 	if (isi->pdata.hsync_act_low)
@@ -801,12 +804,16 @@ static void isi_camera_set_bus_param(struct atmel_isi *isi)
 	cfg1 |= ISI_CFG1_THMASK_BEATS_16;
 
 	/* Enable PM and peripheral clock before operate isi registers */
-	pm_runtime_get_sync(isi->dev);
+	ret = pm_runtime_resume_and_get(isi->dev);
+	if (ret < 0)
+		return ret;
 
 	isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
 	isi_writel(isi, ISI_CFG1, cfg1);
 
 	pm_runtime_put(isi->dev);
+
+	return 0;
 }
 
 /* -----------------------------------------------------------------------*/
@@ -1085,7 +1092,11 @@ static int isi_graph_notify_complete(struct v4l2_async_notifier *notifier)
 		dev_err(isi->dev, "No supported mediabus format found\n");
 		return ret;
 	}
-	isi_camera_set_bus_param(isi);
+	ret = isi_camera_set_bus_param(isi);
+	if (ret) {
+		dev_err(isi->dev, "Can't wake up device\n");
+		return ret;
+	}
 
 	ret = isi_set_default_fmt(isi);
 	if (ret) {
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 09/79] media: mdk-mdp: fix pm_runtime_get_sync() usage count

[Mauro Carvalho Chehab]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter and avoid memory
leaks.

While here, fix the return contition of mtk_mdp_m2m_start_streaming(),
as it doesn't make any sense to return 0 if the PM runtime failed
to resume.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c b/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
index ace4528cdc5e..f14779e7596e 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
@@ -391,12 +391,12 @@ static int mtk_mdp_m2m_start_streaming(struct vb2_queue *q, unsigned int count)
 	struct mtk_mdp_ctx *ctx = q->drv_priv;
 	int ret;
 
-	ret = pm_runtime_get_sync(&ctx->mdp_dev->pdev->dev);
+	ret = pm_runtime_resume_and_get(&ctx->mdp_dev->pdev->dev);
 	if (ret < 0)
-		mtk_mdp_dbg(1, "[%d] pm_runtime_get_sync failed:%d",
+		mtk_mdp_dbg(1, "[%d] pm_runtime_resume_and_get failed:%d",
 			    ctx->id, ret);
 
-	return 0;
+	return ret;
 }
 
 static void *mtk_mdp_m2m_buf_remove(struct mtk_mdp_ctx *ctx,
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 11/79] media: rga-buf: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/rockchip/rga/rga-buf.c | 3 +--
 drivers/media/platform/rockchip/rga/rga.c     | 4 +++-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/rockchip/rga/rga-buf.c b/drivers/media/platform/rockchip/rga/rga-buf.c
index bf9a75b75083..81508ed5abf3 100644
--- a/drivers/media/platform/rockchip/rga/rga-buf.c
+++ b/drivers/media/platform/rockchip/rga/rga-buf.c
@@ -79,9 +79,8 @@ static int rga_buf_start_streaming(struct vb2_queue *q, unsigned int count)
 	struct rockchip_rga *rga = ctx->rga;
 	int ret;
 
-	ret = pm_runtime_get_sync(rga->dev);
+	ret = pm_runtime_resume_and_get(rga->dev);
 	if (ret < 0) {
-		pm_runtime_put_noidle(rga->dev);
 		rga_buf_return_buffers(q, VB2_BUF_STATE_QUEUED);
 		return ret;
 	}
diff --git a/drivers/media/platform/rockchip/rga/rga.c b/drivers/media/platform/rockchip/rga/rga.c
index 9d122429706e..bf3fd71ec3af 100644
--- a/drivers/media/platform/rockchip/rga/rga.c
+++ b/drivers/media/platform/rockchip/rga/rga.c
@@ -866,7 +866,9 @@ static int rga_probe(struct platform_device *pdev)
 		goto unreg_video_dev;
 	}
 
-	pm_runtime_get_sync(rga->dev);
+	ret = pm_runtime_resume_and_get(rga->dev);
+	if (ret < 0)
+		goto unreg_video_dev;
 
 	rga->version.major = (rga_read(rga, RGA_VERSION_INFO) >> 24) & 0xFF;
 	rga->version.minor = (rga_read(rga, RGA_VERSION_INFO) >> 20) & 0x0F;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 11/79] media: rga-buf: use pm_runtime_resume_and_get()

[Ezequiel Garcia]

On Tue, 2021-04-27 at 12:26 +0200, Mauro Carvalho Chehab wrote:
> Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
> added pm_runtime_resume_and_get() in order to automatically handle
> dev->power.usage_count decrement on errors.
> 
> Use the new API, in order to cleanup the error check logic.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Sorry, I just replied to the wrong patch version.
Again:

Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>

Thanks,
Ezequiel

> ---
>  drivers/media/platform/rockchip/rga/rga-buf.c | 3 +--
>  drivers/media/platform/rockchip/rga/rga.c     | 4 +++-
>  2 files changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/media/platform/rockchip/rga/rga-buf.c b/drivers/media/platform/rockchip/rga/rga-buf.c
> index bf9a75b75083..81508ed5abf3 100644
> --- a/drivers/media/platform/rockchip/rga/rga-buf.c
> +++ b/drivers/media/platform/rockchip/rga/rga-buf.c
> @@ -79,9 +79,8 @@ static int rga_buf_start_streaming(struct vb2_queue *q, unsigned int count)
>         struct rockchip_rga *rga = ctx->rga;
>         int ret;
>  
> -       ret = pm_runtime_get_sync(rga->dev);
> +       ret = pm_runtime_resume_and_get(rga->dev);
>         if (ret < 0) {
> -               pm_runtime_put_noidle(rga->dev);
>                 rga_buf_return_buffers(q, VB2_BUF_STATE_QUEUED);
>                 return ret;
>         }
> diff --git a/drivers/media/platform/rockchip/rga/rga.c b/drivers/media/platform/rockchip/rga/rga.c
> index 9d122429706e..bf3fd71ec3af 100644
> --- a/drivers/media/platform/rockchip/rga/rga.c
> +++ b/drivers/media/platform/rockchip/rga/rga.c
> @@ -866,7 +866,9 @@ static int rga_probe(struct platform_device *pdev)
>                 goto unreg_video_dev;
>         }
>  
> -       pm_runtime_get_sync(rga->dev);
> +       ret = pm_runtime_resume_and_get(rga->dev);
> +       if (ret < 0)
> +               goto unreg_video_dev;
>  
>         rga->version.major = (rga_read(rga, RGA_VERSION_INFO) >> 24) & 0xFF;
>         rga->version.minor = (rga_read(rga, RGA_VERSION_INFO) >> 20) & 0x0F;



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 16/79] media: mtk-vcodec: fix pm_runtime_get_sync() usage count

[Mauro Carvalho Chehab]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter and avoid memory
leaks.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
index ddee7046ce42..fe096fe61c9d 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
@@ -92,9 +92,9 @@ void mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
 {
 	int ret;
 
-	ret = pm_runtime_get_sync(pm->dev);
+	ret = pm_runtime_resume_and_get(pm->dev);
 	if (ret)
-		mtk_v4l2_err("pm_runtime_get_sync fail %d", ret);
+		mtk_v4l2_err("pm_runtime_resume_and_get fail %d", ret);
 }
 
 void mtk_vcodec_dec_pw_off(struct mtk_vcodec_pm *pm)
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 17/79] media: s5p-jpeg: fix pm_runtime_get_sync() usage count

[Mauro Carvalho Chehab]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter and avoid memory
leaks.

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/s5p-jpeg/jpeg-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
index 026111505f5a..c4f19418a460 100644
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
@@ -2568,7 +2568,7 @@ static int s5p_jpeg_start_streaming(struct vb2_queue *q, unsigned int count)
 	struct s5p_jpeg_ctx *ctx = vb2_get_drv_priv(q);
 	int ret;
 
-	ret = pm_runtime_get_sync(ctx->jpeg->dev);
+	ret = pm_runtime_resume_and_get(ctx->jpeg->dev);
 
 	return ret > 0 ? 0 : ret;
 }
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 17/79] media: s5p-jpeg: fix pm_runtime_get_sync() usage count

[Andrzej Pietrasiewicz]

Hi Mauro,

Thanks for the patch.

W dniu 27.04.2021 o 12:26, Mauro Carvalho Chehab pisze:
> The pm_runtime_get_sync() internally increments the
> dev->power.usage_count without decrementing it, even on errors.
> Replace it by the new pm_runtime_resume_and_get(), introduced by:
> commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
> in order to properly decrement the usage counter and avoid memory
> leaks.
> 
> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>

> ---
>   drivers/media/platform/s5p-jpeg/jpeg-core.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
> index 026111505f5a..c4f19418a460 100644
> --- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
> +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
> @@ -2568,7 +2568,7 @@ static int s5p_jpeg_start_streaming(struct vb2_queue *q, unsigned int count)
>   	struct s5p_jpeg_ctx *ctx = vb2_get_drv_priv(q);
>   	int ret;
>   
> -	ret = pm_runtime_get_sync(ctx->jpeg->dev);
> +	ret = pm_runtime_resume_and_get(ctx->jpeg->dev);
>   
>   	return ret > 0 ? 0 : ret;
>   }
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 19/79] media: sun8i_rotate: fix pm_runtime_get_sync() usage count

[Mauro Carvalho Chehab]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter and avoid memory
leaks.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c b/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c
index 3f81dd17755c..fbcca59a0517 100644
--- a/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c
+++ b/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c
@@ -494,7 +494,7 @@ static int rotate_start_streaming(struct vb2_queue *vq, unsigned int count)
 		struct device *dev = ctx->dev->dev;
 		int ret;
 
-		ret = pm_runtime_get_sync(dev);
+		ret = pm_runtime_resume_and_get(dev);
 		if (ret < 0) {
 			dev_err(dev, "Failed to enable module\n");
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 22/79] staging: media: imx7-mipi-csis: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/imx/imx7-mipi-csis.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/imx/imx7-mipi-csis.c b/drivers/staging/media/imx/imx7-mipi-csis.c
index 025fdc488bd6..1dc680d94a46 100644
--- a/drivers/staging/media/imx/imx7-mipi-csis.c
+++ b/drivers/staging/media/imx/imx7-mipi-csis.c
@@ -695,11 +695,10 @@ static int mipi_csis_s_stream(struct v4l2_subdev *mipi_sd, int enable)
 
 		mipi_csis_clear_counters(state);
 
-		ret = pm_runtime_get_sync(&state->pdev->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(&state->pdev->dev);
+		ret = pm_runtime_resume_and_get(&state->pdev->dev);
+		if (ret < 0)
 			return ret;
-		}
+
 		ret = v4l2_subdev_call(state->src_sd, core, s_power, 1);
 		if (ret < 0 && ret != -ENOIOCTLCMD)
 			goto done;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 24/79] staging: media: cedrus_video: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/sunxi/cedrus/cedrus_video.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_video.c b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
index b62eb8e84057..9ddd789d0b1f 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_video.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
@@ -490,11 +490,9 @@ static int cedrus_start_streaming(struct vb2_queue *vq, unsigned int count)
 	}
 
 	if (V4L2_TYPE_IS_OUTPUT(vq->type)) {
-		ret = pm_runtime_get_sync(dev->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(dev->dev);
+		ret = pm_runtime_resume_and_get(dev->dev);
+		if (ret < 0)
 			goto err_cleanup;
-		}
 
 		if (dev->dec_ops[ctx->current_codec]->start) {
 			ret = dev->dec_ops[ctx->current_codec]->start(ctx);
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 62/79] media: exynos4-is: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/exynos4-is/fimc-capture.c   | 6 ++----
 drivers/media/platform/exynos4-is/fimc-is.c        | 4 ++--
 drivers/media/platform/exynos4-is/fimc-isp-video.c | 3 +--
 drivers/media/platform/exynos4-is/fimc-isp.c       | 7 +++----
 drivers/media/platform/exynos4-is/fimc-lite.c      | 5 +++--
 drivers/media/platform/exynos4-is/fimc-m2m.c       | 2 +-
 drivers/media/platform/exynos4-is/media-dev.c      | 8 +++-----
 drivers/media/platform/exynos4-is/mipi-csis.c      | 8 +++-----
 8 files changed, 18 insertions(+), 25 deletions(-)

diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index 13c838d3f947..0da36443173c 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -478,11 +478,9 @@ static int fimc_capture_open(struct file *file)
 		goto unlock;
 
 	set_bit(ST_CAPT_BUSY, &fimc->state);
-	ret = pm_runtime_get_sync(&fimc->pdev->dev);
-	if (ret < 0) {
-		pm_runtime_put_sync(&fimc->pdev->dev);
+	ret = pm_runtime_resume_and_get(&fimc->pdev->dev);
+	if (ret < 0)
 		goto unlock;
-	}
 
 	ret = v4l2_fh_open(file);
 	if (ret) {
diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c
index 972d9601d236..1b24f5bfc4af 100644
--- a/drivers/media/platform/exynos4-is/fimc-is.c
+++ b/drivers/media/platform/exynos4-is/fimc-is.c
@@ -828,9 +828,9 @@ static int fimc_is_probe(struct platform_device *pdev)
 			goto err_irq;
 	}
 
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0)
-		goto err_pm;
+		goto err_irq;
 
 	vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
 
diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.c b/drivers/media/platform/exynos4-is/fimc-isp-video.c
index 612b9872afc8..8d9dc597deaa 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp-video.c
+++ b/drivers/media/platform/exynos4-is/fimc-isp-video.c
@@ -275,7 +275,7 @@ static int isp_video_open(struct file *file)
 	if (ret < 0)
 		goto unlock;
 
-	ret = pm_runtime_get_sync(&isp->pdev->dev);
+	ret = pm_runtime_resume_and_get(&isp->pdev->dev);
 	if (ret < 0)
 		goto rel_fh;
 
@@ -293,7 +293,6 @@ static int isp_video_open(struct file *file)
 	if (!ret)
 		goto unlock;
 rel_fh:
-	pm_runtime_put_noidle(&isp->pdev->dev);
 	v4l2_fh_release(file);
 unlock:
 	mutex_unlock(&isp->video_lock);
diff --git a/drivers/media/platform/exynos4-is/fimc-isp.c b/drivers/media/platform/exynos4-is/fimc-isp.c
index a77c49b18511..74b49d30901e 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp.c
+++ b/drivers/media/platform/exynos4-is/fimc-isp.c
@@ -304,11 +304,10 @@ static int fimc_isp_subdev_s_power(struct v4l2_subdev *sd, int on)
 	pr_debug("on: %d\n", on);
 
 	if (on) {
-		ret = pm_runtime_get_sync(&is->pdev->dev);
-		if (ret < 0) {
-			pm_runtime_put(&is->pdev->dev);
+		ret = pm_runtime_resume_and_get(&is->pdev->dev);
+		if (ret < 0)
 			return ret;
-		}
+
 		set_bit(IS_ST_PWR_ON, &is->state);
 
 		ret = fimc_is_start_firmware(is);
diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c
index fe20af3a7178..4d8b18078ff3 100644
--- a/drivers/media/platform/exynos4-is/fimc-lite.c
+++ b/drivers/media/platform/exynos4-is/fimc-lite.c
@@ -469,9 +469,9 @@ static int fimc_lite_open(struct file *file)
 	}
 
 	set_bit(ST_FLITE_IN_USE, &fimc->state);
-	ret = pm_runtime_get_sync(&fimc->pdev->dev);
+	ret = pm_runtime_resume_and_get(&fimc->pdev->dev);
 	if (ret < 0)
-		goto err_pm;
+		goto err_in_use;
 
 	ret = v4l2_fh_open(file);
 	if (ret < 0)
@@ -499,6 +499,7 @@ static int fimc_lite_open(struct file *file)
 	v4l2_fh_release(file);
 err_pm:
 	pm_runtime_put_sync(&fimc->pdev->dev);
+err_in_use:
 	clear_bit(ST_FLITE_IN_USE, &fimc->state);
 unlock:
 	mutex_unlock(&fimc->lock);
diff --git a/drivers/media/platform/exynos4-is/fimc-m2m.c b/drivers/media/platform/exynos4-is/fimc-m2m.c
index c9704a147e5c..7c1eb05c508f 100644
--- a/drivers/media/platform/exynos4-is/fimc-m2m.c
+++ b/drivers/media/platform/exynos4-is/fimc-m2m.c
@@ -75,7 +75,7 @@ static int start_streaming(struct vb2_queue *q, unsigned int count)
 	struct fimc_ctx *ctx = q->drv_priv;
 	int ret;
 
-	ret = pm_runtime_get_sync(&ctx->fimc_dev->pdev->dev);
+	ret = pm_runtime_resume_and_get(&ctx->fimc_dev->pdev->dev);
 	return ret > 0 ? 0 : ret;
 }
 
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index 13d192ba4aa6..9346d44a06c2 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -512,11 +512,9 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
 	if (!fmd->pmf)
 		return -ENXIO;
 
-	ret = pm_runtime_get_sync(fmd->pmf);
-	if (ret < 0) {
-		pm_runtime_put(fmd->pmf);
+	ret = pm_runtime_resume_and_get(fmd->pmf);
+	if (ret < 0)
 		return ret;
-	}
 
 	fmd->num_sensors = 0;
 
@@ -1291,7 +1289,7 @@ static int cam_clk_prepare(struct clk_hw *hw)
 	if (camclk->fmd->pmf == NULL)
 		return -ENODEV;
 
-	ret = pm_runtime_get_sync(camclk->fmd->pmf);
+	ret = pm_runtime_resume_and_get(camclk->fmd->pmf);
 	return ret < 0 ? ret : 0;
 }
 
diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c
index 1aac167abb17..2a6afb78a049 100644
--- a/drivers/media/platform/exynos4-is/mipi-csis.c
+++ b/drivers/media/platform/exynos4-is/mipi-csis.c
@@ -494,7 +494,7 @@ static int s5pcsis_s_power(struct v4l2_subdev *sd, int on)
 	struct device *dev = &state->pdev->dev;
 
 	if (on)
-		return pm_runtime_get_sync(dev);
+		return pm_runtime_resume_and_get(dev);
 
 	return pm_runtime_put_sync(dev);
 }
@@ -509,11 +509,9 @@ static int s5pcsis_s_stream(struct v4l2_subdev *sd, int enable)
 
 	if (enable) {
 		s5pcsis_clear_counters(state);
-		ret = pm_runtime_get_sync(&state->pdev->dev);
-		if (ret && ret != 1) {
-			pm_runtime_put_noidle(&state->pdev->dev);
+		ret = pm_runtime_resume_and_get(&state->pdev->dev);
+		if (ret && ret != 1)
 			return ret;
-		}
 	}
 
 	mutex_lock(&state->lock);
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 62/79] media: exynos4-is: use pm_runtime_resume_and_get()

[Sylwester Nawrocki]

On 27.04.2021 12:26, Mauro Carvalho Chehab wrote:
> Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
> added pm_runtime_resume_and_get() in order to automatically handle
> dev->power.usage_count decrement on errors.
> 
> Use the new API, in order to cleanup the error check logic.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 63/79] media: exynos-gsc: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/exynos-gsc/gsc-m2m.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/exynos-gsc/gsc-m2m.c b/drivers/media/platform/exynos-gsc/gsc-m2m.c
index 27a3c92c73bc..09551e96ac15 100644
--- a/drivers/media/platform/exynos-gsc/gsc-m2m.c
+++ b/drivers/media/platform/exynos-gsc/gsc-m2m.c
@@ -58,7 +58,7 @@ static int gsc_m2m_start_streaming(struct vb2_queue *q, unsigned int count)
 	struct gsc_ctx *ctx = q->drv_priv;
 	int ret;
 
-	ret = pm_runtime_get_sync(&ctx->gsc_dev->pdev->dev);
+	ret = pm_runtime_resume_and_get(&ctx->gsc_dev->pdev->dev);
 	return ret > 0 ? 0 : ret;
 }
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 63/79] media: exynos-gsc: use pm_runtime_resume_and_get()

[Sylwester Nawrocki]

On 27.04.2021 12:26, Mauro Carvalho Chehab wrote:
> Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
> added pm_runtime_resume_and_get() in order to automatically handle
> dev->power.usage_count decrement on errors.
> 
> Use the new API, in order to cleanup the error check logic.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 64/79] media: mtk-jpeg: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
index 88a23bce569d..a89c7b206eef 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
@@ -920,7 +920,7 @@ static void mtk_jpeg_enc_device_run(void *priv)
 	src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
 	dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
 
-	ret = pm_runtime_get_sync(jpeg->dev);
+	ret = pm_runtime_resume_and_get(jpeg->dev);
 	if (ret < 0)
 		goto enc_end;
 
@@ -973,7 +973,7 @@ static void mtk_jpeg_dec_device_run(void *priv)
 		return;
 	}
 
-	ret = pm_runtime_get_sync(jpeg->dev);
+	ret = pm_runtime_resume_and_get(jpeg->dev);
 	if (ret < 0)
 		goto dec_end;
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 70/79] media: rkisp1: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c
index 5f6c9d1623e4..3730376897d9 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c
@@ -1003,9 +1003,8 @@ rkisp1_vb2_start_streaming(struct vb2_queue *queue, unsigned int count)
 	if (ret)
 		goto err_pipeline_stop;
 
-	ret = pm_runtime_get_sync(cap->rkisp1->dev);
+	ret = pm_runtime_resume_and_get(cap->rkisp1->dev);
 	if (ret < 0) {
-		pm_runtime_put_noidle(cap->rkisp1->dev);
 		dev_err(cap->rkisp1->dev, "power up failed %d\n", ret);
 		goto err_destroy_dummy;
 	}
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 72/79] media: s5p-mfc: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/s5p-mfc/s5p_mfc_pm.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
index 62d2320a7218..88b7d33c9197 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
@@ -78,11 +78,9 @@ int s5p_mfc_power_on(void)
 {
 	int i, ret = 0;
 
-	ret = pm_runtime_get_sync(pm->device);
-	if (ret < 0) {
-		pm_runtime_put_noidle(pm->device);
+	ret = pm_runtime_resume_and_get(pm->device);
+	if (ret < 0)
 		return ret;
-	}
 
 	/* clock control */
 	for (i = 0; i < pm->num_clocks; i++) {
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 74/79] media: stm32: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/stm32/stm32-dcmi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index bbcc2254fa2e..5f4e1db8cfcd 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -723,11 +723,11 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 	u32 val = 0;
 	int ret;
 
-	ret = pm_runtime_get_sync(dcmi->dev);
+	ret = pm_runtime_resume_and_get(dcmi->dev);
 	if (ret < 0) {
 		dev_err(dcmi->dev, "%s: Failed to start streaming, cannot get sync (%d)\n",
 			__func__, ret);
-		goto err_pm_put;
+		goto err_unlock;
 	}
 
 	ret = media_pipeline_start(&dcmi->vdev->entity, &dcmi->pipeline);
@@ -848,6 +848,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 
 err_pm_put:
 	pm_runtime_put(dcmi->dev);
+err_unlock:
 	spin_lock_irq(&dcmi->irqlock);
 	/*
 	 * Return all buffers to vb2 in QUEUED state.
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 75/79] media: sunxi: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c b/drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c
index 4785faddf630..54b909987caa 100644
--- a/drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c
+++ b/drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c
@@ -206,9 +206,9 @@ static int sun4i_csi_open(struct file *file)
 	if (ret)
 		return ret;
 
-	ret = pm_runtime_get_sync(csi->dev);
+	ret = pm_runtime_resume_and_get(csi->dev);
 	if (ret < 0)
-		goto err_pm_put;
+		goto err_unlock;
 
 	ret = v4l2_pipeline_pm_get(&csi->vdev.entity);
 	if (ret)
@@ -227,6 +227,8 @@ static int sun4i_csi_open(struct file *file)
 
 err_pm_put:
 	pm_runtime_put(csi->dev);
+
+err_unlock:
 	mutex_unlock(&csi->lock);
 
 	return ret;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel