* [PATCH] Revert "ARM: dts: bcm2711: Add the BSC interrupt controller"
@ 2021-02-12 19:11 Florian Fainelli
2021-02-16 7:55 ` Maxime Ripard
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Florian Fainelli @ 2021-02-12 19:11 UTC (permalink / raw)
To: linux-arm-kernel
Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Florian Fainelli, maxime, dave.stevenson, maz, open list,
dri-devel, eric, Rob Herring, bcm-kernel-feedback-list,
linux-rpi-kernel, tzimmermann, hverkuil-cisco, mchehab,
nsaenzjulienne, linux-media
As Dave reported:
This seems to have unintended side effects. GIC interrupt 117 is shared
between the standard I2C controllers (i2c-bcm2835) and the l2-intc block
handling the HDMI I2C interrupts.
There is not a great way to share an interrupt between an interrupt
controller using the chained IRQ handler which is an interrupt flow and
another driver like i2c-bcm2835 which uses an interrupt handler
(although it specifies IRQF_SHARED).
Simply revert this change for now which will mean that HDMI I2C will be
polled, like it was before.
Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm2711.dtsi | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 462b1dfb0385..720beec54d61 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -308,14 +308,6 @@ dvp: clock@7ef00000 {
#reset-cells = <1>;
};
- bsc_intr: interrupt-controller@7ef00040 {
- compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
- reg = <0x7ef00040 0x30>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
aon_intr: interrupt-controller@7ef00100 {
compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
reg = <0x7ef00100 0x30>;
@@ -362,8 +354,6 @@ ddc0: i2c@7ef04500 {
reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
reg-names = "bsc", "auto-i2c";
clock-frequency = <97500>;
- interrupt-parent = <&bsc_intr>;
- interrupts = <0>;
status = "disabled";
};
@@ -405,8 +395,6 @@ ddc1: i2c@7ef09500 {
reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
reg-names = "bsc", "auto-i2c";
clock-frequency = <97500>;
- interrupt-parent = <&bsc_intr>;
- interrupts = <1>;
status = "disabled";
};
};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] Revert "ARM: dts: bcm2711: Add the BSC interrupt controller"
2021-02-12 19:11 [PATCH] Revert "ARM: dts: bcm2711: Add the BSC interrupt controller" Florian Fainelli
@ 2021-02-16 7:55 ` Maxime Ripard
2021-02-16 17:13 ` Nicolas Saenz Julienne
2021-02-17 1:12 ` Florian Fainelli
2 siblings, 0 replies; 4+ messages in thread
From: Maxime Ripard @ 2021-02-16 7:55 UTC (permalink / raw)
To: Florian Fainelli
Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
dave.stevenson, maz, nsaenzjulienne, open list, dri-devel, eric,
Rob Herring, bcm-kernel-feedback-list, linux-rpi-kernel,
tzimmermann, hverkuil-cisco, mchehab, linux-arm-kernel,
linux-media
[-- Attachment #1.1: Type: text/plain, Size: 841 bytes --]
On Fri, Feb 12, 2021 at 11:11:04AM -0800, Florian Fainelli wrote:
> As Dave reported:
>
> This seems to have unintended side effects. GIC interrupt 117 is shared
> between the standard I2C controllers (i2c-bcm2835) and the l2-intc block
> handling the HDMI I2C interrupts.
>
> There is not a great way to share an interrupt between an interrupt
> controller using the chained IRQ handler which is an interrupt flow and
> another driver like i2c-bcm2835 which uses an interrupt handler
> (although it specifies IRQF_SHARED).
>
> Simply revert this change for now which will mean that HDMI I2C will be
> polled, like it was before.
>
> Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Thanks!
Maxime
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] Revert "ARM: dts: bcm2711: Add the BSC interrupt controller"
2021-02-12 19:11 [PATCH] Revert "ARM: dts: bcm2711: Add the BSC interrupt controller" Florian Fainelli
2021-02-16 7:55 ` Maxime Ripard
@ 2021-02-16 17:13 ` Nicolas Saenz Julienne
2021-02-17 1:12 ` Florian Fainelli
2 siblings, 0 replies; 4+ messages in thread
From: Nicolas Saenz Julienne @ 2021-02-16 17:13 UTC (permalink / raw)
To: Florian Fainelli, linux-arm-kernel
Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-media, dave.stevenson, maz, open list, dri-devel, eric,
Rob Herring, bcm-kernel-feedback-list, maxime, tzimmermann,
hverkuil-cisco, mchehab, linux-rpi-kernel
[-- Attachment #1.1: Type: text/plain, Size: 851 bytes --]
On Fri, 2021-02-12 at 11:11 -0800, Florian Fainelli wrote:
> As Dave reported:
>
> This seems to have unintended side effects. GIC interrupt 117 is shared
> between the standard I2C controllers (i2c-bcm2835) and the l2-intc block
> handling the HDMI I2C interrupts.
>
> There is not a great way to share an interrupt between an interrupt
> controller using the chained IRQ handler which is an interrupt flow and
> another driver like i2c-bcm2835 which uses an interrupt handler
> (although it specifies IRQF_SHARED).
>
> Simply revert this change for now which will mean that HDMI I2C will be
> polled, like it was before.
>
> Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Regards,
Nicolas
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] Revert "ARM: dts: bcm2711: Add the BSC interrupt controller"
2021-02-12 19:11 [PATCH] Revert "ARM: dts: bcm2711: Add the BSC interrupt controller" Florian Fainelli
2021-02-16 7:55 ` Maxime Ripard
2021-02-16 17:13 ` Nicolas Saenz Julienne
@ 2021-02-17 1:12 ` Florian Fainelli
2 siblings, 0 replies; 4+ messages in thread
From: Florian Fainelli @ 2021-02-17 1:12 UTC (permalink / raw)
To: Florian Fainelli, linux-arm-kernel
Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
maxime, dave.stevenson, maz, open list, dri-devel, eric,
Rob Herring, bcm-kernel-feedback-list, linux-rpi-kernel,
tzimmermann, hverkuil-cisco, mchehab, nsaenzjulienne,
linux-media
On 2/12/2021 11:11 AM, Florian Fainelli wrote:
> As Dave reported:
>
> This seems to have unintended side effects. GIC interrupt 117 is shared
> between the standard I2C controllers (i2c-bcm2835) and the l2-intc block
> handling the HDMI I2C interrupts.
>
> There is not a great way to share an interrupt between an interrupt
> controller using the chained IRQ handler which is an interrupt flow and
> another driver like i2c-bcm2835 which uses an interrupt handler
> (although it specifies IRQF_SHARED).
>
> Simply revert this change for now which will mean that HDMI I2C will be
> polled, like it was before.
>
> Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Applied to devicetree/next, thanks!
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-02-17 1:14 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-12 19:11 [PATCH] Revert "ARM: dts: bcm2711: Add the BSC interrupt controller" Florian Fainelli
2021-02-16 7:55 ` Maxime Ripard
2021-02-16 17:13 ` Nicolas Saenz Julienne
2021-02-17 1:12 ` Florian Fainelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).