* [PATCH v2] clk: zynqmp: fix compile testing without ZYNQMP_FIRMWARE
@ 2021-06-21 13:13 Michal Simek
2021-06-21 13:51 ` Arnd Bergmann
2021-06-22 7:12 ` quanyang.wang
0 siblings, 2 replies; 5+ messages in thread
From: Michal Simek @ 2021-06-21 13:13 UTC (permalink / raw)
To: linux-kernel, monstr, michal.simek, git
Cc: Arnd Bergmann, Michael Turquette, Punit Agrawal, Quanyang Wang,
Stephen Boyd, linux-arm-kernel, linux-clk
From: Arnd Bergmann <arnd@arndb.de>
When the firmware code is disabled, the incomplete error handling
in the clk driver causes compile-time warnings:
drivers/clk/zynqmp/pll.c: In function 'zynqmp_pll_recalc_rate':
drivers/clk/zynqmp/pll.c:147:29: error: 'fbdiv' is used uninitialized [-Werror=uninitialized]
147 | rate = parent_rate * fbdiv;
| ~~~~~~~~~~~~^~~~~~~
In function 'zynqmp_pll_get_mode',
inlined from 'zynqmp_pll_recalc_rate' at drivers/clk/zynqmp/pll.c:148:6:
drivers/clk/zynqmp/pll.c:61:27: error: 'ret_payload' is used uninitialized [-Werror=uninitialized]
61 | return ret_payload[1];
| ~~~~~~~~~~~^~~
drivers/clk/zynqmp/pll.c: In function 'zynqmp_pll_recalc_rate':
drivers/clk/zynqmp/pll.c:53:13: note: 'ret_payload' declared here
53 | u32 ret_payload[PAYLOAD_ARG_CNT];
| ^~~~~~~~~~~
drivers/clk/zynqmp/clk-mux-zynqmp.c: In function 'zynqmp_clk_mux_get_parent':
drivers/clk/zynqmp/clk-mux-zynqmp.c:57:16: error: 'val' is used uninitialized [-Werror=uninitialized]
57 | return val;
| ^~~
As it was apparently intentional to support this for compile testing
purposes, change the code to have just enough error handling for the
compiler to not notice the remaining bugs.
Fixes: 21f237534661 ("clk: zynqmp: Drop dependency on ARCH_ZYNQMP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
Changes in v2:
Based on discussion here
Link: https://lore.kernel.org/r/20210421134844.3297838-1-arnd@kernel.org
I have updated error return value which I got from clock core based on
error cases.
zynqmp_clk_mux_get_parent() should return num_parents() as error defined in
clk_core_get_parent_by_index() where num_parents is incorrect index.
Extend zynqmp_pll_get_mode() with PLL_MODE_ERROR to handle error case.
zynqmp_pll_recalc_rate() returns 0 because __clk_core_init() consider 0 as
default rate. But maybe -1ul which was used by Arnd is also good option.
---
drivers/clk/zynqmp/clk-mux-zynqmp.c | 10 ++++++++--
drivers/clk/zynqmp/pll.c | 15 ++++++++++-----
2 files changed, 18 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/zynqmp/clk-mux-zynqmp.c b/drivers/clk/zynqmp/clk-mux-zynqmp.c
index 06194149be83..d576c900dee0 100644
--- a/drivers/clk/zynqmp/clk-mux-zynqmp.c
+++ b/drivers/clk/zynqmp/clk-mux-zynqmp.c
@@ -38,7 +38,7 @@ struct zynqmp_clk_mux {
* zynqmp_clk_mux_get_parent() - Get parent of clock
* @hw: handle between common and hardware-specific interfaces
*
- * Return: Parent index
+ * Return: Parent index on success or number of parents in case of error
*/
static u8 zynqmp_clk_mux_get_parent(struct clk_hw *hw)
{
@@ -50,9 +50,15 @@ static u8 zynqmp_clk_mux_get_parent(struct clk_hw *hw)
ret = zynqmp_pm_clock_getparent(clk_id, &val);
- if (ret)
+ if (ret) {
pr_warn_once("%s() getparent failed for clock: %s, ret = %d\n",
__func__, clk_name, ret);
+ /*
+ * clk_core_get_parent_by_index() takes num_parents as incorrect
+ * index which is exactly what I want to return here
+ */
+ return clk_hw_get_num_parents(hw);
+ }
return val;
}
diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c
index abe6afbf3407..3fe4d21227d0 100644
--- a/drivers/clk/zynqmp/pll.c
+++ b/drivers/clk/zynqmp/pll.c
@@ -31,8 +31,9 @@ struct zynqmp_pll {
#define PS_PLL_VCO_MAX 3000000000UL
enum pll_mode {
- PLL_MODE_INT,
- PLL_MODE_FRAC,
+ PLL_MODE_INT = 0,
+ PLL_MODE_FRAC = 1,
+ PLL_MODE_ERROR = 2,
};
#define FRAC_OFFSET 0x8
@@ -54,9 +55,11 @@ static inline enum pll_mode zynqmp_pll_get_mode(struct clk_hw *hw)
int ret;
ret = zynqmp_pm_get_pll_frac_mode(clk_id, ret_payload);
- if (ret)
+ if (ret) {
pr_warn_once("%s() PLL get frac mode failed for %s, ret = %d\n",
__func__, clk_name, ret);
+ return PLL_MODE_ERROR;
+ }
return ret_payload[1];
}
@@ -126,7 +129,7 @@ static long zynqmp_pll_round_rate(struct clk_hw *hw, unsigned long rate,
* @hw: Handle between common and hardware-specific interfaces
* @parent_rate: Clock frequency of parent clock
*
- * Return: Current clock frequency
+ * Return: Current clock frequency or 0 in case of error
*/
static unsigned long zynqmp_pll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
@@ -140,9 +143,11 @@ static unsigned long zynqmp_pll_recalc_rate(struct clk_hw *hw,
int ret;
ret = zynqmp_pm_clock_getdivider(clk_id, &fbdiv);
- if (ret)
+ if (ret) {
pr_warn_once("%s() get divider failed for %s, ret = %d\n",
__func__, clk_name, ret);
+ return 0ul;
+ }
rate = parent_rate * fbdiv;
if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH v2] clk: zynqmp: fix compile testing without ZYNQMP_FIRMWARE
2021-06-21 13:13 [PATCH v2] clk: zynqmp: fix compile testing without ZYNQMP_FIRMWARE Michal Simek
@ 2021-06-21 13:51 ` Arnd Bergmann
2021-06-21 13:54 ` Michal Simek
2021-06-22 7:12 ` quanyang.wang
1 sibling, 1 reply; 5+ messages in thread
From: Arnd Bergmann @ 2021-06-21 13:51 UTC (permalink / raw)
To: Michal Simek
Cc: Linux Kernel Mailing List, Michal Simek, git, Michael Turquette,
Punit Agrawal, Quanyang Wang, Stephen Boyd, Linux ARM, linux-clk
On Mon, Jun 21, 2021 at 3:14 PM Michal Simek <michal.simek@xilinx.com> wrote:
>
> From: Arnd Bergmann <arnd@arndb.de>
>
> When the firmware code is disabled, the incomplete error handling
> in the clk driver causes compile-time warnings:
>
> drivers/clk/zynqmp/pll.c: In function 'zynqmp_pll_recalc_rate':
> drivers/clk/zynqmp/pll.c:147:29: error: 'fbdiv' is used uninitialized [-Werror=uninitialized]
> 147 | rate = parent_rate * fbdiv;
> | ~~~~~~~~~~~~^~~~~~~
> In function 'zynqmp_pll_get_mode',
> inlined from 'zynqmp_pll_recalc_rate' at drivers/clk/zynqmp/pll.c:148:6:
> drivers/clk/zynqmp/pll.c:61:27: error: 'ret_payload' is used uninitialized [-Werror=uninitialized]
> 61 | return ret_payload[1];
> | ~~~~~~~~~~~^~~
> drivers/clk/zynqmp/pll.c: In function 'zynqmp_pll_recalc_rate':
> drivers/clk/zynqmp/pll.c:53:13: note: 'ret_payload' declared here
> 53 | u32 ret_payload[PAYLOAD_ARG_CNT];
> | ^~~~~~~~~~~
> drivers/clk/zynqmp/clk-mux-zynqmp.c: In function 'zynqmp_clk_mux_get_parent':
> drivers/clk/zynqmp/clk-mux-zynqmp.c:57:16: error: 'val' is used uninitialized [-Werror=uninitialized]
> 57 | return val;
> | ^~~
>
> As it was apparently intentional to support this for compile testing
> purposes, change the code to have just enough error handling for the
> compiler to not notice the remaining bugs.
>
> Fixes: 21f237534661 ("clk: zynqmp: Drop dependency on ARCH_ZYNQMP")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>
> Changes in v2:
> Based on discussion here
> Link: https://lore.kernel.org/r/20210421134844.3297838-1-arnd@kernel.org
> I have updated error return value which I got from clock core based on
> error cases.
>
> zynqmp_clk_mux_get_parent() should return num_parents() as error defined in
> clk_core_get_parent_by_index() where num_parents is incorrect index.
>
> Extend zynqmp_pll_get_mode() with PLL_MODE_ERROR to handle error case.
>
> zynqmp_pll_recalc_rate() returns 0 because __clk_core_init() consider 0 as
> default rate. But maybe -1ul which was used by Arnd is also good option.
Looks good to me. You changed more than I did now, so it might be better
to change my authorship to Co-developed-by, probably not worth respinning
for that.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v2] clk: zynqmp: fix compile testing without ZYNQMP_FIRMWARE
2021-06-21 13:51 ` Arnd Bergmann
@ 2021-06-21 13:54 ` Michal Simek
0 siblings, 0 replies; 5+ messages in thread
From: Michal Simek @ 2021-06-21 13:54 UTC (permalink / raw)
To: Arnd Bergmann, Michal Simek
Cc: Linux Kernel Mailing List, Michal Simek, git, Michael Turquette,
Punit Agrawal, Quanyang Wang, Stephen Boyd, Linux ARM, linux-clk
On 6/21/21 3:51 PM, Arnd Bergmann wrote:
> On Mon, Jun 21, 2021 at 3:14 PM Michal Simek <michal.simek@xilinx.com> wrote:
>>
>> From: Arnd Bergmann <arnd@arndb.de>
>>
>> When the firmware code is disabled, the incomplete error handling
>> in the clk driver causes compile-time warnings:
>>
>> drivers/clk/zynqmp/pll.c: In function 'zynqmp_pll_recalc_rate':
>> drivers/clk/zynqmp/pll.c:147:29: error: 'fbdiv' is used uninitialized [-Werror=uninitialized]
>> 147 | rate = parent_rate * fbdiv;
>> | ~~~~~~~~~~~~^~~~~~~
>> In function 'zynqmp_pll_get_mode',
>> inlined from 'zynqmp_pll_recalc_rate' at drivers/clk/zynqmp/pll.c:148:6:
>> drivers/clk/zynqmp/pll.c:61:27: error: 'ret_payload' is used uninitialized [-Werror=uninitialized]
>> 61 | return ret_payload[1];
>> | ~~~~~~~~~~~^~~
>> drivers/clk/zynqmp/pll.c: In function 'zynqmp_pll_recalc_rate':
>> drivers/clk/zynqmp/pll.c:53:13: note: 'ret_payload' declared here
>> 53 | u32 ret_payload[PAYLOAD_ARG_CNT];
>> | ^~~~~~~~~~~
>> drivers/clk/zynqmp/clk-mux-zynqmp.c: In function 'zynqmp_clk_mux_get_parent':
>> drivers/clk/zynqmp/clk-mux-zynqmp.c:57:16: error: 'val' is used uninitialized [-Werror=uninitialized]
>> 57 | return val;
>> | ^~~
>>
>> As it was apparently intentional to support this for compile testing
>> purposes, change the code to have just enough error handling for the
>> compiler to not notice the remaining bugs.
>>
>> Fixes: 21f237534661 ("clk: zynqmp: Drop dependency on ARCH_ZYNQMP")
>> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
>> ---
>>
>> Changes in v2:
>> Based on discussion here
>> Link: https://lore.kernel.org/r/20210421134844.3297838-1-arnd@kernel.org
>> I have updated error return value which I got from clock core based on
>> error cases.
>>
>> zynqmp_clk_mux_get_parent() should return num_parents() as error defined in
>> clk_core_get_parent_by_index() where num_parents is incorrect index.
>>
>> Extend zynqmp_pll_get_mode() with PLL_MODE_ERROR to handle error case.
>>
>> zynqmp_pll_recalc_rate() returns 0 because __clk_core_init() consider 0 as
>> default rate. But maybe -1ul which was used by Arnd is also good option.
>
> Looks good to me. You changed more than I did now, so it might be better
> to change my authorship to Co-developed-by, probably not worth respinning
> for that.
Let's see what Stephen said about these changes.
Thanks,
Michal
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] clk: zynqmp: fix compile testing without ZYNQMP_FIRMWARE
2021-06-21 13:13 [PATCH v2] clk: zynqmp: fix compile testing without ZYNQMP_FIRMWARE Michal Simek
2021-06-21 13:51 ` Arnd Bergmann
@ 2021-06-22 7:12 ` quanyang.wang
2021-06-22 10:15 ` Michal Simek
1 sibling, 1 reply; 5+ messages in thread
From: quanyang.wang @ 2021-06-22 7:12 UTC (permalink / raw)
To: Michal Simek, linux-kernel, monstr, git
Cc: Arnd Bergmann, Michael Turquette, Punit Agrawal, Stephen Boyd,
linux-arm-kernel, linux-clk
Hi Michal & Arnd,
On 6/21/21 9:13 PM, Michal Simek wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> When the firmware code is disabled, the incomplete error handling
> in the clk driver causes compile-time warnings:
>
> drivers/clk/zynqmp/pll.c: In function 'zynqmp_pll_recalc_rate':
> drivers/clk/zynqmp/pll.c:147:29: error: 'fbdiv' is used uninitialized [-Werror=uninitialized]
> 147 | rate = parent_rate * fbdiv;
> | ~~~~~~~~~~~~^~~~~~~
> In function 'zynqmp_pll_get_mode',
> inlined from 'zynqmp_pll_recalc_rate' at drivers/clk/zynqmp/pll.c:148:6:
> drivers/clk/zynqmp/pll.c:61:27: error: 'ret_payload' is used uninitialized [-Werror=uninitialized]
> 61 | return ret_payload[1];
> | ~~~~~~~~~~~^~~
> drivers/clk/zynqmp/pll.c: In function 'zynqmp_pll_recalc_rate':
> drivers/clk/zynqmp/pll.c:53:13: note: 'ret_payload' declared here
> 53 | u32 ret_payload[PAYLOAD_ARG_CNT];
> | ^~~~~~~~~~~
> drivers/clk/zynqmp/clk-mux-zynqmp.c: In function 'zynqmp_clk_mux_get_parent':
> drivers/clk/zynqmp/clk-mux-zynqmp.c:57:16: error: 'val' is used uninitialized [-Werror=uninitialized]
> 57 | return val;
> | ^~~
>
> As it was apparently intentional to support this for compile testing
> purposes, change the code to have just enough error handling for the
> compiler to not notice the remaining bugs.
>
> Fixes: 21f237534661 ("clk: zynqmp: Drop dependency on ARCH_ZYNQMP")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>
> Changes in v2:
> Based on discussion here
> Link: https://lore.kernel.org/r/20210421134844.3297838-1-arnd@kernel.org
> I have updated error return value which I got from clock core based on
> error cases.
>
> zynqmp_clk_mux_get_parent() should return num_parents() as error defined in
> clk_core_get_parent_by_index() where num_parents is incorrect index.
>
> Extend zynqmp_pll_get_mode() with PLL_MODE_ERROR to handle error case.
>
> zynqmp_pll_recalc_rate() returns 0 because __clk_core_init() consider 0 as
> default rate. But maybe -1ul which was used by Arnd is also good option.
>
> ---
> drivers/clk/zynqmp/clk-mux-zynqmp.c | 10 ++++++++--
> drivers/clk/zynqmp/pll.c | 15 ++++++++++-----
> 2 files changed, 18 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/clk/zynqmp/clk-mux-zynqmp.c b/drivers/clk/zynqmp/clk-mux-zynqmp.c
> index 06194149be83..d576c900dee0 100644
> --- a/drivers/clk/zynqmp/clk-mux-zynqmp.c
> +++ b/drivers/clk/zynqmp/clk-mux-zynqmp.c
> @@ -38,7 +38,7 @@ struct zynqmp_clk_mux {
> * zynqmp_clk_mux_get_parent() - Get parent of clock
> * @hw: handle between common and hardware-specific interfaces
> *
> - * Return: Parent index
> + * Return: Parent index on success or number of parents in case of error
> */
> static u8 zynqmp_clk_mux_get_parent(struct clk_hw *hw)
> {
> @@ -50,9 +50,15 @@ static u8 zynqmp_clk_mux_get_parent(struct clk_hw *hw)
>
> ret = zynqmp_pm_clock_getparent(clk_id, &val);
>
> - if (ret)
> + if (ret) {
> pr_warn_once("%s() getparent failed for clock: %s, ret = %d\n",
> __func__, clk_name, ret);
> + /*
> + * clk_core_get_parent_by_index() takes num_parents as incorrect
> + * index which is exactly what I want to return here
> + */
> + return clk_hw_get_num_parents(hw);
> + }
>
> return val;
> }
> diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c
> index abe6afbf3407..3fe4d21227d0 100644
> --- a/drivers/clk/zynqmp/pll.c
> +++ b/drivers/clk/zynqmp/pll.c
> @@ -31,8 +31,9 @@ struct zynqmp_pll {
> #define PS_PLL_VCO_MAX 3000000000UL
>
> enum pll_mode {
> - PLL_MODE_INT,
> - PLL_MODE_FRAC,
> + PLL_MODE_INT = 0,
> + PLL_MODE_FRAC = 1,
> + PLL_MODE_ERROR = 2,
> };
>
> #define FRAC_OFFSET 0x8
> @@ -54,9 +55,11 @@ static inline enum pll_mode zynqmp_pll_get_mode(struct clk_hw *hw)
> int ret;
>
> ret = zynqmp_pm_get_pll_frac_mode(clk_id, ret_payload);
> - if (ret)
> + if (ret) {
> pr_warn_once("%s() PLL get frac mode failed for %s, ret = %d\n",
> __func__, clk_name, ret);
> + return PLL_MODE_ERROR;
> + }
>
> return ret_payload[1];
> }
> @@ -126,7 +129,7 @@ static long zynqmp_pll_round_rate(struct clk_hw *hw, unsigned long rate,
> * @hw: Handle between common and hardware-specific interfaces
> * @parent_rate: Clock frequency of parent clock
> *
> - * Return: Current clock frequency
> + * Return: Current clock frequency or 0 in case of error
> */
> static unsigned long zynqmp_pll_recalc_rate(struct clk_hw *hw,
> unsigned long parent_rate)
> @@ -140,9 +143,11 @@ static unsigned long zynqmp_pll_recalc_rate(struct clk_hw *hw,
> int ret;
>
> ret = zynqmp_pm_clock_getdivider(clk_id, &fbdiv);
> - if (ret)
> + if (ret) {
> pr_warn_once("%s() get divider failed for %s, ret = %d\n",
> __func__, clk_name, ret);
> + return 0ul;
> + }
>
Since zynqmp_pll_get_mode may return err now, maybe here should add a
condition check for PLL_MODE_ERR:
if (zynqmp_pll_get_mode(hw) == PLL_MODE_ERR)
return 0ul;
Thanks,
Quanyang
> rate = parent_rate * fbdiv;
> if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v2] clk: zynqmp: fix compile testing without ZYNQMP_FIRMWARE
2021-06-22 7:12 ` quanyang.wang
@ 2021-06-22 10:15 ` Michal Simek
0 siblings, 0 replies; 5+ messages in thread
From: Michal Simek @ 2021-06-22 10:15 UTC (permalink / raw)
To: quanyang.wang, Michal Simek, linux-kernel, monstr, git
Cc: Arnd Bergmann, Michael Turquette, Punit Agrawal, Stephen Boyd,
linux-arm-kernel, linux-clk
Hi,
On 6/22/21 9:12 AM, quanyang.wang wrote:
> Hi Michal & Arnd,
>
> On 6/21/21 9:13 PM, Michal Simek wrote:
>> From: Arnd Bergmann <arnd@arndb.de>
>>
>> When the firmware code is disabled, the incomplete error handling
>> in the clk driver causes compile-time warnings:
>>
>> drivers/clk/zynqmp/pll.c: In function 'zynqmp_pll_recalc_rate':
>> drivers/clk/zynqmp/pll.c:147:29: error: 'fbdiv' is used uninitialized
>> [-Werror=uninitialized]
>> 147 | rate = parent_rate * fbdiv;
>> | ~~~~~~~~~~~~^~~~~~~
>> In function 'zynqmp_pll_get_mode',
>> inlined from 'zynqmp_pll_recalc_rate' at
>> drivers/clk/zynqmp/pll.c:148:6:
>> drivers/clk/zynqmp/pll.c:61:27: error: 'ret_payload' is used
>> uninitialized [-Werror=uninitialized]
>> 61 | return ret_payload[1];
>> | ~~~~~~~~~~~^~~
>> drivers/clk/zynqmp/pll.c: In function 'zynqmp_pll_recalc_rate':
>> drivers/clk/zynqmp/pll.c:53:13: note: 'ret_payload' declared here
>> 53 | u32 ret_payload[PAYLOAD_ARG_CNT];
>> | ^~~~~~~~~~~
>> drivers/clk/zynqmp/clk-mux-zynqmp.c: In function
>> 'zynqmp_clk_mux_get_parent':
>> drivers/clk/zynqmp/clk-mux-zynqmp.c:57:16: error: 'val' is used
>> uninitialized [-Werror=uninitialized]
>> 57 | return val;
>> | ^~~
>>
>> As it was apparently intentional to support this for compile testing
>> purposes, change the code to have just enough error handling for the
>> compiler to not notice the remaining bugs.
>>
>> Fixes: 21f237534661 ("clk: zynqmp: Drop dependency on ARCH_ZYNQMP")
>> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
>> ---
>>
>> Changes in v2:
>> Based on discussion here
>> Link: https://lore.kernel.org/r/20210421134844.3297838-1-arnd@kernel.org
>> I have updated error return value which I got from clock core based on
>> error cases.
>>
>> zynqmp_clk_mux_get_parent() should return num_parents() as error
>> defined in
>> clk_core_get_parent_by_index() where num_parents is incorrect index.
>>
>> Extend zynqmp_pll_get_mode() with PLL_MODE_ERROR to handle error case.
>>
>> zynqmp_pll_recalc_rate() returns 0 because __clk_core_init() consider
>> 0 as
>> default rate. But maybe -1ul which was used by Arnd is also good option.
>>
>> ---
>> drivers/clk/zynqmp/clk-mux-zynqmp.c | 10 ++++++++--
>> drivers/clk/zynqmp/pll.c | 15 ++++++++++-----
>> 2 files changed, 18 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/clk/zynqmp/clk-mux-zynqmp.c
>> b/drivers/clk/zynqmp/clk-mux-zynqmp.c
>> index 06194149be83..d576c900dee0 100644
>> --- a/drivers/clk/zynqmp/clk-mux-zynqmp.c
>> +++ b/drivers/clk/zynqmp/clk-mux-zynqmp.c
>> @@ -38,7 +38,7 @@ struct zynqmp_clk_mux {
>> * zynqmp_clk_mux_get_parent() - Get parent of clock
>> * @hw: handle between common and hardware-specific interfaces
>> *
>> - * Return: Parent index
>> + * Return: Parent index on success or number of parents in case of error
>> */
>> static u8 zynqmp_clk_mux_get_parent(struct clk_hw *hw)
>> {
>> @@ -50,9 +50,15 @@ static u8 zynqmp_clk_mux_get_parent(struct clk_hw *hw)
>> ret = zynqmp_pm_clock_getparent(clk_id, &val);
>> - if (ret)
>> + if (ret) {
>> pr_warn_once("%s() getparent failed for clock: %s, ret = %d\n",
>> __func__, clk_name, ret);
>> + /*
>> + * clk_core_get_parent_by_index() takes num_parents as incorrect
>> + * index which is exactly what I want to return here
>> + */
>> + return clk_hw_get_num_parents(hw);
>> + }
>> return val;
>> }
>> diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c
>> index abe6afbf3407..3fe4d21227d0 100644
>> --- a/drivers/clk/zynqmp/pll.c
>> +++ b/drivers/clk/zynqmp/pll.c
>> @@ -31,8 +31,9 @@ struct zynqmp_pll {
>> #define PS_PLL_VCO_MAX 3000000000UL
>> enum pll_mode {
>> - PLL_MODE_INT,
>> - PLL_MODE_FRAC,
>> + PLL_MODE_INT = 0,
>> + PLL_MODE_FRAC = 1,
>> + PLL_MODE_ERROR = 2,
>> };
>> #define FRAC_OFFSET 0x8
>> @@ -54,9 +55,11 @@ static inline enum pll_mode
>> zynqmp_pll_get_mode(struct clk_hw *hw)
>> int ret;
>> ret = zynqmp_pm_get_pll_frac_mode(clk_id, ret_payload);
>> - if (ret)
>> + if (ret) {
>> pr_warn_once("%s() PLL get frac mode failed for %s, ret =
>> %d\n",
>> __func__, clk_name, ret);
>> + return PLL_MODE_ERROR;
>> + }
>> return ret_payload[1];
>> }
>> @@ -126,7 +129,7 @@ static long zynqmp_pll_round_rate(struct clk_hw
>> *hw, unsigned long rate,
>> * @hw: Handle between common and hardware-specific
>> interfaces
>> * @parent_rate: Clock frequency of parent clock
>> *
>> - * Return: Current clock frequency
>> + * Return: Current clock frequency or 0 in case of error
>> */
>> static unsigned long zynqmp_pll_recalc_rate(struct clk_hw *hw,
>> unsigned long parent_rate)
>> @@ -140,9 +143,11 @@ static unsigned long
>> zynqmp_pll_recalc_rate(struct clk_hw *hw,
>> int ret;
>> ret = zynqmp_pm_clock_getdivider(clk_id, &fbdiv);
>> - if (ret)
>> + if (ret) {
>> pr_warn_once("%s() get divider failed for %s, ret = %d\n",
>> __func__, clk_name, ret);
>> + return 0ul;
>> + }
>>
> Since zynqmp_pll_get_mode may return err now, maybe here should add a
> condition check for PLL_MODE_ERR:
> if (zynqmp_pll_get_mode(hw) == PLL_MODE_ERR)
> return 0ul;
Agree. I have sent v3 with this there. Please review.
Thanks,
Michal
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-06-22 10:17 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-21 13:13 [PATCH v2] clk: zynqmp: fix compile testing without ZYNQMP_FIRMWARE Michal Simek
2021-06-21 13:51 ` Arnd Bergmann
2021-06-21 13:54 ` Michal Simek
2021-06-22 7:12 ` quanyang.wang
2021-06-22 10:15 ` Michal Simek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).