* [GIT PULL] Actions ARM64 DT updates for v5.1
@ 2019-02-18 13:50 Manivannan Sadhasivam
2019-02-18 16:49 ` Andreas Färber
2019-02-20 15:37 ` Arnd Bergmann
0 siblings, 2 replies; 4+ messages in thread
From: Manivannan Sadhasivam @ 2019-02-18 13:50 UTC (permalink / raw)
To: arm; +Cc: linux-actions, afaerber, linux-arm-kernel
Hi Arnd, Olof,
Please consider pulling the delayed Actions ARM64 DT updates for v5.1.
Since Andreas is busy, I'm doing the PR this time (with his agreement).
Thanks,
Mani
---
The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:
Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions.git tags/actions-arm64-dt-for-v5.1
for you to fetch changes up to 9175a8116f452a515cea734c6fedee6788e6bc33:
arm64: dts: actions: s700-cubieboard7: Enable I2C0 and I2C1 (2019-02-16 11:32:46 +0530)
----------------------------------------------------------------
Actions ARM64 DT changes for v5.1:
- Add interrupt properties to S900 pinctrl node
- Add Reset controller support for S700
- Add Reset controller support for S900
- Add pinctrl support for S700
- Add I2C support for S700
- Enable I2C0 and I2C1 for s700-cubieboard7
----------------------------------------------------------------
Manivannan Sadhasivam (3):
arm64: dts: actions: Add interrupt properties to pinctrl node for S900
arm64: dts: actions: Add Reset Controller support for S700 SoC
arm64: dts: actions: Add Reset Controller support for S900 SoC
Parthiban Nallathambi (2):
arm64: dts: actions: s700: Add I2C controller nodes
arm64: dts: actions: s700-cubieboard7: Enable I2C0 and I2C1
Saravanan Sekar (1):
arm64: dts: actions: Add pinctrl node for Actions Semi S700
arch/arm64/boot/dts/actions/s700-cubieboard7.dts | 53 +++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/actions/s700.dtsi | 58 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/actions/s900.dtsi | 10 ++++++++++
3 files changed, 121 insertions(+)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [GIT PULL] Actions ARM64 DT updates for v5.1
2019-02-18 13:50 [GIT PULL] Actions ARM64 DT updates for v5.1 Manivannan Sadhasivam
@ 2019-02-18 16:49 ` Andreas Färber
2019-02-20 15:37 ` Arnd Bergmann
1 sibling, 0 replies; 4+ messages in thread
From: Andreas Färber @ 2019-02-18 16:49 UTC (permalink / raw)
To: Manivannan Sadhasivam, arm; +Cc: linux-actions, linux-arm-kernel
Am 18.02.19 um 14:50 schrieb Manivannan Sadhasivam:
> Hi Arnd, Olof,
>
> Please consider pulling the delayed Actions ARM64 DT updates for v5.1.
> Since Andreas is busy, I'm doing the PR this time (with his agreement).
Ack.
Thanks,
Andreas
>
> Thanks,
> Mani
>
> ---
> The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:
>
> Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions.git tags/actions-arm64-dt-for-v5.1
>
> for you to fetch changes up to 9175a8116f452a515cea734c6fedee6788e6bc33:
>
> arm64: dts: actions: s700-cubieboard7: Enable I2C0 and I2C1 (2019-02-16 11:32:46 +0530)
>
> ----------------------------------------------------------------
> Actions ARM64 DT changes for v5.1:
>
> - Add interrupt properties to S900 pinctrl node
> - Add Reset controller support for S700
> - Add Reset controller support for S900
> - Add pinctrl support for S700
> - Add I2C support for S700
> - Enable I2C0 and I2C1 for s700-cubieboard7
>
> ----------------------------------------------------------------
> Manivannan Sadhasivam (3):
> arm64: dts: actions: Add interrupt properties to pinctrl node for S900
> arm64: dts: actions: Add Reset Controller support for S700 SoC
> arm64: dts: actions: Add Reset Controller support for S900 SoC
>
> Parthiban Nallathambi (2):
> arm64: dts: actions: s700: Add I2C controller nodes
> arm64: dts: actions: s700-cubieboard7: Enable I2C0 and I2C1
>
> Saravanan Sekar (1):
> arm64: dts: actions: Add pinctrl node for Actions Semi S700
>
> arch/arm64/boot/dts/actions/s700-cubieboard7.dts | 53 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm64/boot/dts/actions/s700.dtsi | 58 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm64/boot/dts/actions/s900.dtsi | 10 ++++++++++
> 3 files changed, 121 insertions(+)
>
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PULL] Actions ARM64 DT updates for v5.1
2019-02-18 13:50 [GIT PULL] Actions ARM64 DT updates for v5.1 Manivannan Sadhasivam
2019-02-18 16:49 ` Andreas Färber
@ 2019-02-20 15:37 ` Arnd Bergmann
2019-02-21 9:33 ` Manivannan Sadhasivam
1 sibling, 1 reply; 4+ messages in thread
From: Arnd Bergmann @ 2019-02-20 15:37 UTC (permalink / raw)
To: Manivannan Sadhasivam
Cc: arm-soc, linux-actions, Andreas Färber, Linux ARM
On Mon, Feb 18, 2019 at 2:50 PM Manivannan Sadhasivam
<manivannan.sadhasivam@linaro.org> wrote:
> ---
> The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:
>
> Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions.git tags/actions-arm64-dt-for-v5.1
>
> for you to fetch changes up to 9175a8116f452a515cea734c6fedee6788e6bc33:
>
> arm64: dts: actions: s700-cubieboard7: Enable I2C0 and I2C1 (2019-02-16 11:32:46 +0530)
>
> ----------------------------------------------------------------
> Actions ARM64 DT changes for v5.1:
>
> - Add interrupt properties to S900 pinctrl node
> - Add Reset controller support for S700
> - Add Reset controller support for S900
> - Add pinctrl support for S700
> - Add I2C support for S700
> - Enable I2C0 and I2C1 for s700-cubieboard7
>
> ----------------------------------------------------------------
> Manivannan Sadhasivam (3):
> arm64: dts: actions: Add interrupt properties to pinctrl node for S900
> arm64: dts: actions: Add Reset Controller support for S700 SoC
> arm64: dts: actions: Add Reset Controller support for S900 SoC
>
> Parthiban Nallathambi (2):
> arm64: dts: actions: s700: Add I2C controller nodes
> arm64: dts: actions: s700-cubieboard7: Enable I2C0 and I2C1
>
> Saravanan Sekar (1):
> arm64: dts: actions: Add pinctrl node for Actions Semi S700
Pulled into arm/dt, but please try to improve the tag description for
the next round: the text you have is more or less just a repeat
of the one-line subjects of the individual patches.
Instead, what you want to do is give a high-level description of what
is going on overall in your branch (e.g. adding multiple DT nodes for
missing devices) and ideally some background (e.g. how much
of the SoCs are actually described now, and how much is still
missing here).
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [GIT PULL] Actions ARM64 DT updates for v5.1
2019-02-20 15:37 ` Arnd Bergmann
@ 2019-02-21 9:33 ` Manivannan Sadhasivam
0 siblings, 0 replies; 4+ messages in thread
From: Manivannan Sadhasivam @ 2019-02-21 9:33 UTC (permalink / raw)
To: Arnd Bergmann; +Cc: arm-soc, linux-actions, Andreas Färber, Linux ARM
Hi Arnd,
On Wed, Feb 20, 2019 at 04:37:58PM +0100, Arnd Bergmann wrote:
> On Mon, Feb 18, 2019 at 2:50 PM Manivannan Sadhasivam
> <manivannan.sadhasivam@linaro.org> wrote:
> > ---
> > The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:
> >
> > Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)
> >
> > are available in the Git repository at:
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions.git tags/actions-arm64-dt-for-v5.1
> >
> > for you to fetch changes up to 9175a8116f452a515cea734c6fedee6788e6bc33:
> >
> > arm64: dts: actions: s700-cubieboard7: Enable I2C0 and I2C1 (2019-02-16 11:32:46 +0530)
> >
> > ----------------------------------------------------------------
> > Actions ARM64 DT changes for v5.1:
> >
> > - Add interrupt properties to S900 pinctrl node
> > - Add Reset controller support for S700
> > - Add Reset controller support for S900
> > - Add pinctrl support for S700
> > - Add I2C support for S700
> > - Enable I2C0 and I2C1 for s700-cubieboard7
> >
> > ----------------------------------------------------------------
> > Manivannan Sadhasivam (3):
> > arm64: dts: actions: Add interrupt properties to pinctrl node for S900
> > arm64: dts: actions: Add Reset Controller support for S700 SoC
> > arm64: dts: actions: Add Reset Controller support for S900 SoC
> >
> > Parthiban Nallathambi (2):
> > arm64: dts: actions: s700: Add I2C controller nodes
> > arm64: dts: actions: s700-cubieboard7: Enable I2C0 and I2C1
> >
> > Saravanan Sekar (1):
> > arm64: dts: actions: Add pinctrl node for Actions Semi S700
>
> Pulled into arm/dt, but please try to improve the tag description for
> the next round: the text you have is more or less just a repeat
> of the one-line subjects of the individual patches.
>
> Instead, what you want to do is give a high-level description of what
> is going on overall in your branch (e.g. adding multiple DT nodes for
> missing devices) and ideally some background (e.g. how much
> of the SoCs are actually described now, and how much is still
> missing here).
>
Sorry for that. I will keep these in mind next time.
Thanks,
Mani
> Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-02-21 9:33 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-18 13:50 [GIT PULL] Actions ARM64 DT updates for v5.1 Manivannan Sadhasivam
2019-02-18 16:49 ` Andreas Färber
2019-02-20 15:37 ` Arnd Bergmann
2019-02-21 9:33 ` Manivannan Sadhasivam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).