* [PATCH v5 01/23] drivers/fsi: Add fsi master definition
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 02/23] drivers/fsi: Add slave definition Christopher Bostic
` (21 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: linux-arm-kernel
From: Jeremy Kerr <jk@ozlabs.org>
Add a `struct fsi_master` to represent a FSI master controller.
FSI master drivers register one of these structs to provide
device-specific of the standard operations: read/write/term/break and
link control.
Includes changes from Edward A. James <eajames@us.ibm.com> & Jeremy Kerr
<jk@ozlabs.org>.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/fsi/fsi-core.c | 35 +++++++++++++++++++++++++++++++++++
drivers/fsi/fsi-master.h | 41 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 76 insertions(+)
create mode 100644 drivers/fsi/fsi-master.h
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 3d55bd5..ca02913 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -15,8 +15,43 @@
#include <linux/device.h>
#include <linux/fsi.h>
+#include <linux/idr.h>
#include <linux/module.h>
+#include "fsi-master.h"
+
+static DEFINE_IDA(master_ida);
+
+/* FSI master support */
+int fsi_master_register(struct fsi_master *master)
+{
+ int rc;
+
+ if (!master)
+ return -EINVAL;
+
+ master->idx = ida_simple_get(&master_ida, 0, INT_MAX, GFP_KERNEL);
+ dev_set_name(&master->dev, "fsi%d", master->idx);
+
+ rc = device_register(&master->dev);
+ if (rc)
+ ida_simple_remove(&master_ida, master->idx);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(fsi_master_register);
+
+void fsi_master_unregister(struct fsi_master *master)
+{
+ if (master->idx >= 0) {
+ ida_simple_remove(&master_ida, master->idx);
+ master->idx = -1;
+ }
+
+ device_unregister(&master->dev);
+}
+EXPORT_SYMBOL_GPL(fsi_master_unregister);
+
/* FSI core & Linux bus type definitions */
static int fsi_bus_match(struct device *dev, struct device_driver *drv)
diff --git a/drivers/fsi/fsi-master.h b/drivers/fsi/fsi-master.h
new file mode 100644
index 0000000..7764b00
--- /dev/null
+++ b/drivers/fsi/fsi-master.h
@@ -0,0 +1,41 @@
+/*
+ * FSI master definitions. These comprise the core <--> master interface,
+ * to allow the core to interact with the (hardware-specific) masters.
+ *
+ * Copyright (C) IBM Corporation 2016
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef DRIVERS_FSI_MASTER_H
+#define DRIVERS_FSI_MASTER_H
+
+#include <linux/device.h>
+
+struct fsi_master {
+ struct device dev;
+ int idx;
+ int n_links;
+ int flags;
+ int (*read)(struct fsi_master *, int link, uint8_t id,
+ uint32_t addr, void *val, size_t size);
+ int (*write)(struct fsi_master *, int link, uint8_t id,
+ uint32_t addr, const void *val, size_t size);
+ int (*term)(struct fsi_master *, int link, uint8_t id);
+ int (*send_break)(struct fsi_master *, int link);
+ int (*link_enable)(struct fsi_master *, int link);
+};
+
+#define dev_to_fsi_master(d) container_of(d, struct fsi_master, dev)
+
+extern int fsi_master_register(struct fsi_master *master);
+extern void fsi_master_unregister(struct fsi_master *master);
+
+#endif /* DRIVERS_FSI_MASTER_H */
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 02/23] drivers/fsi: Add slave definition
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 01/23] drivers/fsi: Add fsi master definition Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 03/23] drivers/fsi: Add empty master scan Christopher Bostic
` (20 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: linux-arm-kernel
From: Jeremy Kerr <jk@ozlabs.org>
Add the initial fsi slave device, which is private to the core code.
This will be a child of the master, and parent to endpoint devices.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/fsi/fsi-core.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index ca02913..2f19509 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -22,6 +22,16 @@
static DEFINE_IDA(master_ida);
+struct fsi_slave {
+ struct device dev;
+ struct fsi_master *master;
+ int id;
+ int link;
+ uint32_t size; /* size of slave address space */
+};
+
+#define to_fsi_slave(d) container_of(d, struct fsi_slave, dev)
+
/* FSI master support */
int fsi_master_register(struct fsi_master *master)
{
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 03/23] drivers/fsi: Add empty master scan
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 01/23] drivers/fsi: Add fsi master definition Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 02/23] drivers/fsi: Add slave definition Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 04/23] drivers/fsi: Add crc4 helpers Christopher Bostic
` (19 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: linux-arm-kernel
From: Jeremy Kerr <jk@ozlabs.org>
When a new fsi master is added, we will need to scan its links, and
slaves attached to those links. This change introduces a little shell to
iterate the links, which we will populate with the actual slave scan in
a later change.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/fsi/fsi-core.c | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 2f19509..e90d45d 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -32,7 +32,25 @@ struct fsi_slave {
#define to_fsi_slave(d) container_of(d, struct fsi_slave, dev)
+/* FSI slave support */
+static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
+{
+ /* todo: initialise slave device, perform engine scan */
+
+ return -ENODEV;
+}
+
/* FSI master support */
+static int fsi_master_scan(struct fsi_master *master)
+{
+ int link;
+
+ for (link = 0; link < master->n_links; link++)
+ fsi_slave_init(master, link, 0);
+
+ return 0;
+}
+
int fsi_master_register(struct fsi_master *master)
{
int rc;
@@ -44,10 +62,13 @@ int fsi_master_register(struct fsi_master *master)
dev_set_name(&master->dev, "fsi%d", master->idx);
rc = device_register(&master->dev);
- if (rc)
+ if (rc) {
ida_simple_remove(&master_ida, master->idx);
+ return rc;
+ }
- return rc;
+ fsi_master_scan(master);
+ return 0;
}
EXPORT_SYMBOL_GPL(fsi_master_register);
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 04/23] drivers/fsi: Add crc4 helpers
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (2 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 03/23] drivers/fsi: Add empty master scan Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 05/23] drivers/fsi: Add slave & master read/write APIs Christopher Bostic
` (18 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: linux-arm-kernel
From: Jeremy Kerr <jk@ozlabs.org>
Add some helpers for the crc checks for the slave configuration table.
This works 4-bits-at-a-time, using a simple table approach.
We will need this in the FSI core code, as well as any master
implementations that need to calculate CRCs in software.
We add this to the fsi code (rather than lib/), as we need a specific
polynomial for FSI CRCs.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/fsi/fsi-core.c | 24 ++++++++++++++++++++++++
drivers/fsi/fsi-master.h | 21 +++++++++++++++++++++
2 files changed, 45 insertions(+)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index e90d45d..4bbca95 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -32,6 +32,30 @@ struct fsi_slave {
#define to_fsi_slave(d) container_of(d, struct fsi_slave, dev)
+/* crc helpers */
+static const uint8_t crc4_tab[] = {
+ 0x0, 0x7, 0xe, 0x9, 0xb, 0xc, 0x5, 0x2,
+ 0x1, 0x6, 0xf, 0x8, 0xa, 0xd, 0x4, 0x3,
+};
+
+uint8_t fsi_crc4(uint8_t c, uint64_t x, int bits)
+{
+ int i;
+
+ /* Align to 4-bits */
+ bits = (bits + 3) & ~0x3;
+
+ /* mask off anything above the top bit */
+ x &= (1ull << bits) - 1;
+
+ /* Calculate crc4 over four-bit nibbles, starting@the MSbit */
+ for (i = bits - 4; i >= 0; i -= 4)
+ c = crc4_tab[c ^ ((x >> i) & 0xf)];
+
+ return c;
+}
+EXPORT_SYMBOL_GPL(fsi_crc4);
+
/* FSI slave support */
static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
{
diff --git a/drivers/fsi/fsi-master.h b/drivers/fsi/fsi-master.h
index 7764b00..d6a4885 100644
--- a/drivers/fsi/fsi-master.h
+++ b/drivers/fsi/fsi-master.h
@@ -38,4 +38,25 @@ struct fsi_master {
extern int fsi_master_register(struct fsi_master *master);
extern void fsi_master_unregister(struct fsi_master *master);
+/**
+ * crc4 helper: Given a starting crc4 state @c, calculate the crc4 vaue of @x,
+ * which is @bits in length. This may be required by master implementations
+ * that do not provide their own hardware checksums.
+ *
+ * The crc4 is performed on 4-bit chunks (which is all we need for FSI
+ * calculations). Typically, we'll want a starting state of 0:
+ *
+ * c = fsi_crc4(0, msg, len);
+ *
+ * To crc4 a message that includes a single start bit, initialise crc4 state
+ * with:
+ *
+ * c = fsi_crc4(0, 1, 1);
+ *
+ * Then update with message data:
+ *
+ * c = fsi_crc4(c, msg, len);
+ */
+uint8_t fsi_crc4(uint8_t c, uint64_t x, int bits);
+
#endif /* DRIVERS_FSI_MASTER_H */
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 05/23] drivers/fsi: Add slave & master read/write APIs
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (3 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 04/23] drivers/fsi: Add crc4 helpers Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 06/23] drivers/fsi: Set up links for slave communication Christopher Bostic
` (17 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: linux-arm-kernel
From: Jeremy Kerr <jk@ozlabs.org>
Introduce functions to perform reads/writes on the slave address space;
these simply pass the request on the slave's master with the correct
link and slave ID.
We implement these on top of similar helpers for the master.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
---
drivers/fsi/fsi-core.c | 92 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 92 insertions(+)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 4bbca95..32698ed 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -32,6 +32,11 @@ struct fsi_slave {
#define to_fsi_slave(d) container_of(d, struct fsi_slave, dev)
+static int fsi_master_read(struct fsi_master *master, int link,
+ uint8_t slave_id, uint32_t addr, void *val, size_t size);
+static int fsi_master_write(struct fsi_master *master, int link,
+ uint8_t slave_id, uint32_t addr, const void *val, size_t size);
+
/* crc helpers */
static const uint8_t crc4_tab[] = {
0x0, 0x7, 0xe, 0x9, 0xb, 0xc, 0x5, 0x2,
@@ -57,6 +62,58 @@ uint8_t fsi_crc4(uint8_t c, uint64_t x, int bits)
EXPORT_SYMBOL_GPL(fsi_crc4);
/* FSI slave support */
+static int fsi_slave_calc_addr(struct fsi_slave *slave, uint32_t *addrp,
+ uint8_t *idp)
+{
+ uint32_t addr = *addrp;
+ uint8_t id = *idp;
+
+ if (addr > slave->size)
+ return -EINVAL;
+
+ /* For 23 bit addressing, we encode the extra two bits in the slave
+ * id (and the slave's actual ID needs to be 0).
+ */
+ if (addr > 0x1fffff) {
+ if (slave->id != 0)
+ return -EINVAL;
+ id = (addr >> 21) & 0x3;
+ addr &= 0x1fffff;
+ }
+
+ *addrp = addr;
+ *idp = id;
+ return 0;
+}
+
+static int fsi_slave_read(struct fsi_slave *slave, uint32_t addr,
+ void *val, size_t size)
+{
+ uint8_t id = slave->id;
+ int rc;
+
+ rc = fsi_slave_calc_addr(slave, &addr, &id);
+ if (rc)
+ return rc;
+
+ return fsi_master_read(slave->master, slave->link, id,
+ addr, val, size);
+}
+
+static int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
+ const void *val, size_t size)
+{
+ uint8_t id = slave->id;
+ int rc;
+
+ rc = fsi_slave_calc_addr(slave, &addr, &id);
+ if (rc)
+ return rc;
+
+ return fsi_master_write(slave->master, slave->link, id,
+ addr, val, size);
+}
+
static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
{
/* todo: initialise slave device, perform engine scan */
@@ -65,6 +122,41 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
}
/* FSI master support */
+static int fsi_check_access(uint32_t addr, size_t size)
+{
+ if (size != 1 && size != 2 && size != 4)
+ return -EINVAL;
+
+ if ((addr & 0x3) != (size & 0x3))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int fsi_master_read(struct fsi_master *master, int link,
+ uint8_t slave_id, uint32_t addr, void *val, size_t size)
+{
+ int rc;
+
+ rc = fsi_check_access(addr, size);
+ if (rc)
+ return rc;
+
+ return master->read(master, link, slave_id, addr, val, size);
+}
+
+static int fsi_master_write(struct fsi_master *master, int link,
+ uint8_t slave_id, uint32_t addr, const void *val, size_t size)
+{
+ int rc;
+
+ rc = fsi_check_access(addr, size);
+ if (rc)
+ return rc;
+
+ return master->write(master, link, slave_id, addr, val, size);
+}
+
static int fsi_master_scan(struct fsi_master *master)
{
int link;
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 06/23] drivers/fsi: Set up links for slave communication
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (4 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 05/23] drivers/fsi: Add slave & master read/write APIs Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 07/23] drivers/fsi: Implement slave initialisation Christopher Bostic
` (16 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: linux-arm-kernel
From: Chris Bostic <cbostic@linux.vnet.ibm.com>
Enable each link and send a break command, and try to detect a slave by
reading from the SMODE register.
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/fsi/fsi-core.c | 37 +++++++++++++++++++++++++++++++++++--
1 file changed, 35 insertions(+), 2 deletions(-)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 32698ed..6e1cfdf 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -157,12 +157,45 @@ static int fsi_master_write(struct fsi_master *master, int link,
return master->write(master, link, slave_id, addr, val, size);
}
+static int fsi_master_link_enable(struct fsi_master *master, int link)
+{
+ if (master->link_enable)
+ return master->link_enable(master, link);
+
+ return 0;
+}
+
+/*
+ * Issue a break command on this link
+ */
+static int fsi_master_break(struct fsi_master *master, int link)
+{
+ if (master->send_break)
+ return master->send_break(master, link);
+
+ return 0;
+}
+
static int fsi_master_scan(struct fsi_master *master)
{
- int link;
+ int link, rc;
+
+ for (link = 0; link < master->n_links; link++) {
+ rc = fsi_master_link_enable(master, link);
+ if (rc) {
+ dev_dbg(&master->dev,
+ "enable link %d failed: %d\n", link, rc);
+ continue;
+ }
+ rc = fsi_master_break(master, link);
+ if (rc) {
+ dev_dbg(&master->dev,
+ "break to link %d failed: %d\n", link, rc);
+ continue;
+ }
- for (link = 0; link < master->n_links; link++)
fsi_slave_init(master, link, 0);
+ }
return 0;
}
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 07/23] drivers/fsi: Implement slave initialisation
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (5 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 06/23] drivers/fsi: Set up links for slave communication Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 08/23] drivers/fsi: Set slave SMODE to init communication Christopher Bostic
` (15 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: linux-arm-kernel
From: Jeremy Kerr <jk@ozlabs.org>
Implement fsi_slave_init: if we can read a chip ID, create fsi_slave
devices and register with the driver core.
Includes changes from Chris Bostic <cbostic@linux.vnet.ibm.com>.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/fsi/fsi-core.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 64 insertions(+), 2 deletions(-)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 6e1cfdf..c705ca2 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -17,9 +17,12 @@
#include <linux/fsi.h>
#include <linux/idr.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include "fsi-master.h"
+#define FSI_SLAVE_SIZE_23b 0x800000
+
static DEFINE_IDA(master_ida);
struct fsi_slave {
@@ -114,11 +117,70 @@ static int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
addr, val, size);
}
+static void fsi_slave_release(struct device *dev)
+{
+ struct fsi_slave *slave = to_fsi_slave(dev);
+
+ kfree(slave);
+}
+
static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
{
- /* todo: initialise slave device, perform engine scan */
+ struct fsi_slave *slave;
+ uint32_t chip_id;
+ uint8_t crc;
+ int rc;
+
+ /* Currently, we only support single slaves on a link, and use the
+ * full 23-bit address range
+ */
+ if (id != 0)
+ return -EINVAL;
+
+ rc = fsi_master_read(master, link, id, 0, &chip_id, sizeof(chip_id));
+ if (rc) {
+ dev_warn(&master->dev, "can't read slave %02x:%02x %d\n",
+ link, id, rc);
+ return -ENODEV;
+ }
+ chip_id = be32_to_cpu(chip_id);
+
+ crc = fsi_crc4(0, chip_id, 32);
+ if (crc) {
+ dev_warn(&master->dev, "slave %02x:%02x invalid chip id CRC!\n",
+ link, id);
+ return -EIO;
+ }
+
+ dev_info(&master->dev, "fsi: found chip %08x at %02x:%02x:%02x\n",
+ chip_id, master->idx, link, id);
+
+ /* We can communicate with a slave; create the slave device and
+ * register.
+ */
+ slave = kzalloc(sizeof(*slave), GFP_KERNEL);
+ if (!slave)
+ return -ENOMEM;
+
+ slave->master = master;
+ slave->dev.parent = &master->dev;
+ slave->dev.release = fsi_slave_release;
+ slave->link = link;
+ slave->id = id;
+ slave->size = FSI_SLAVE_SIZE_23b;
+
+ dev_set_name(&slave->dev, "slave@%02x:%02x", link, id);
+ rc = device_register(&slave->dev);
+ if (rc < 0) {
+ dev_warn(&master->dev, "failed to create slave device: %d\n",
+ rc);
+ put_device(&slave->dev);
+ return rc;
+ }
+
+ /* todo: perform engine scan */
- return -ENODEV;
+ return rc;
}
/* FSI master support */
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 08/23] drivers/fsi: Set slave SMODE to init communication
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (6 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 07/23] drivers/fsi: Implement slave initialisation Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 09/23] drivers/fsi: scan slaves & register devices Christopher Bostic
` (14 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: linux-arm-kernel
From: Chris Bostic <cbostic@linux.vnet.ibm.com>
Set CFAM to appropriate ID so that the controlling master can manage
link memory ranges. Add slave engine register definitions.
Includes changes from Jeremy Kerr <jk@ozlabs.org>.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/fsi/fsi-core.c | 75 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 75 insertions(+)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index c705ca2..b7b138b 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -21,6 +21,27 @@
#include "fsi-master.h"
+#define FSI_SLAVE_BASE 0x800
+
+/*
+ * FSI slave engine control register offsets
+ */
+#define FSI_SMODE 0x0 /* R/W: Mode register */
+
+/*
+ * SMODE fields
+ */
+#define FSI_SMODE_WSC 0x80000000 /* Warm start done */
+#define FSI_SMODE_ECRC 0x20000000 /* Hw CRC check */
+#define FSI_SMODE_SID_SHIFT 24 /* ID shift */
+#define FSI_SMODE_SID_MASK 3 /* ID Mask */
+#define FSI_SMODE_ED_SHIFT 20 /* Echo delay shift */
+#define FSI_SMODE_ED_MASK 0xf /* Echo delay mask */
+#define FSI_SMODE_SD_SHIFT 16 /* Send delay shift */
+#define FSI_SMODE_SD_MASK 0xf /* Send delay mask */
+#define FSI_SMODE_LBCRR_SHIFT 8 /* Clk ratio shift */
+#define FSI_SMODE_LBCRR_MASK 0xf /* Clk ratio mask */
+
#define FSI_SLAVE_SIZE_23b 0x800000
static DEFINE_IDA(master_ida);
@@ -117,6 +138,52 @@ static int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
addr, val, size);
}
+/* Encode slave local bus echo delay */
+static inline uint32_t fsi_smode_echodly(int x)
+{
+ return (x & FSI_SMODE_ED_MASK) << FSI_SMODE_ED_SHIFT;
+}
+
+/* Encode slave local bus send delay */
+static inline uint32_t fsi_smode_senddly(int x)
+{
+ return (x & FSI_SMODE_SD_MASK) << FSI_SMODE_SD_SHIFT;
+}
+
+/* Encode slave local bus clock rate ratio */
+static inline uint32_t fsi_smode_lbcrr(int x)
+{
+ return (x & FSI_SMODE_LBCRR_MASK) << FSI_SMODE_LBCRR_SHIFT;
+}
+
+/* Encode slave ID */
+static inline uint32_t fsi_smode_sid(int x)
+{
+ return (x & FSI_SMODE_SID_MASK) << FSI_SMODE_SID_SHIFT;
+}
+
+static const uint32_t fsi_slave_smode(int id)
+{
+ return FSI_SMODE_WSC | FSI_SMODE_ECRC
+ | fsi_smode_sid(id)
+ | fsi_smode_echodly(0xf) | fsi_smode_senddly(0xf)
+ | fsi_smode_lbcrr(0x8);
+}
+
+static int fsi_slave_set_smode(struct fsi_master *master, int link, int id)
+{
+ uint32_t smode;
+
+ /* set our smode register with the slave ID field to 0; this enables
+ * extended slave addressing
+ */
+ smode = fsi_slave_smode(id);
+ smode = cpu_to_be32(smode);
+
+ return fsi_master_write(master, link, id, FSI_SLAVE_BASE + FSI_SMODE,
+ &smode, sizeof(smode));
+}
+
static void fsi_slave_release(struct device *dev)
{
struct fsi_slave *slave = to_fsi_slave(dev);
@@ -155,6 +222,14 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
dev_info(&master->dev, "fsi: found chip %08x at %02x:%02x:%02x\n",
chip_id, master->idx, link, id);
+ rc = fsi_slave_set_smode(master, link, id);
+ if (rc) {
+ dev_warn(&master->dev,
+ "can't set smode on slave:%02x:%02x %d\n",
+ link, id, rc);
+ return -ENODEV;
+ }
+
/* We can communicate with a slave; create the slave device and
* register.
*/
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 09/23] drivers/fsi: scan slaves & register devices
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (7 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 08/23] drivers/fsi: Set slave SMODE to init communication Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 10/23] drivers/fsi: Add device read/write/peek API Christopher Bostic
` (13 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: linux-arm-kernel
From: Jeremy Kerr <jk@ozlabs.org>
Now that we have fsi_slave devices, scan each for endpoints, and
register them on the fsi bus.
Includes contributions from Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/fsi/fsi-core.c | 127 +++++++++++++++++++++++++++++++++++++++++++++++--
include/linux/fsi.h | 4 ++
2 files changed, 128 insertions(+), 3 deletions(-)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index b7b138b..a8faa89 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -21,6 +21,19 @@
#include "fsi-master.h"
+#define FSI_SLAVE_CONF_NEXT_MASK 0x80000000
+#define FSI_SLAVE_CONF_SLOTS_MASK 0x00ff0000
+#define FSI_SLAVE_CONF_SLOTS_SHIFT 16
+#define FSI_SLAVE_CONF_VERSION_MASK 0x0000f000
+#define FSI_SLAVE_CONF_VERSION_SHIFT 12
+#define FSI_SLAVE_CONF_TYPE_MASK 0x00000ff0
+#define FSI_SLAVE_CONF_TYPE_SHIFT 4
+#define FSI_SLAVE_CONF_CRC_SHIFT 4
+#define FSI_SLAVE_CONF_CRC_MASK 0x0000000f
+#define FSI_SLAVE_CONF_DATA_BITS 28
+
+static const int engine_page_size = 0x400;
+
#define FSI_SLAVE_BASE 0x800
/*
@@ -61,6 +74,30 @@ static int fsi_master_read(struct fsi_master *master, int link,
static int fsi_master_write(struct fsi_master *master, int link,
uint8_t slave_id, uint32_t addr, const void *val, size_t size);
+/* FSI endpoint-device support */
+
+static void fsi_device_release(struct device *_device)
+{
+ struct fsi_device *device = to_fsi_dev(_device);
+
+ kfree(device);
+}
+
+static struct fsi_device *fsi_create_device(struct fsi_slave *slave)
+{
+ struct fsi_device *dev;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ dev->dev.parent = &slave->dev;
+ dev->dev.bus = &fsi_bus_type;
+ dev->dev.release = fsi_device_release;
+
+ return dev;
+}
+
/* crc helpers */
static const uint8_t crc4_tab[] = {
0x0, 0x7, 0xe, 0x9, 0xb, 0xc, 0x5, 0x2,
@@ -138,6 +175,91 @@ static int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
addr, val, size);
}
+static int fsi_slave_scan(struct fsi_slave *slave)
+{
+ uint32_t engine_addr;
+ uint32_t conf;
+ int rc, i;
+
+ /*
+ * scan engines
+ *
+ * We keep the peek mode and slave engines for the core; so start
+ * at the third slot in the configuration table. We also need to
+ * skip the chip ID entry at the start of the address space.
+ */
+ engine_addr = engine_page_size * 3;
+ for (i = 2; i < engine_page_size / sizeof(uint32_t); i++) {
+ uint8_t slots, version, type, crc;
+ struct fsi_device *dev;
+
+ rc = fsi_slave_read(slave, (i + 1) * sizeof(conf),
+ &conf, sizeof(conf));
+ if (rc) {
+ dev_warn(&slave->dev,
+ "error reading slave registers\n");
+ return -1;
+ }
+ conf = be32_to_cpu(conf);
+
+ crc = fsi_crc4(0, conf, 32);
+ if (crc) {
+ dev_warn(&slave->dev,
+ "crc error in slave register at 0x%04x\n",
+ i);
+ return -1;
+ }
+
+ slots = (conf & FSI_SLAVE_CONF_SLOTS_MASK)
+ >> FSI_SLAVE_CONF_SLOTS_SHIFT;
+ version = (conf & FSI_SLAVE_CONF_VERSION_MASK)
+ >> FSI_SLAVE_CONF_VERSION_SHIFT;
+ type = (conf & FSI_SLAVE_CONF_TYPE_MASK)
+ >> FSI_SLAVE_CONF_TYPE_SHIFT;
+
+ /*
+ * Unused address areas are marked by a zero type value; this
+ * skips the defined address areas
+ */
+ if (type != 0 && slots != 0) {
+
+ /* create device */
+ dev = fsi_create_device(slave);
+ if (!dev)
+ return -ENOMEM;
+
+ dev->slave = slave;
+ dev->engine_type = type;
+ dev->version = version;
+ dev->unit = i;
+ dev->addr = engine_addr;
+ dev->size = slots * engine_page_size;
+
+ dev_info(&slave->dev,
+ "engine[%i]: type %x, version %x, addr %x size %x\n",
+ dev->unit, dev->engine_type, version,
+ dev->addr, dev->size);
+
+ dev_set_name(&dev->dev, "%02x:%02x:%02x:%02x",
+ slave->master->idx, slave->link,
+ slave->id, i - 2);
+
+ rc = device_register(&dev->dev);
+ if (rc) {
+ dev_warn(&slave->dev, "add failed: %d\n", rc);
+ put_device(&dev->dev);
+ }
+ }
+
+ engine_addr += slots * engine_page_size;
+
+ if (!(conf & FSI_SLAVE_CONF_NEXT_MASK))
+ break;
+ }
+
+ return 0;
+}
+
/* Encode slave local bus echo delay */
static inline uint32_t fsi_smode_echodly(int x)
{
@@ -253,9 +375,8 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
return rc;
}
- /* todo: perform engine scan */
-
- return rc;
+ fsi_slave_scan(slave);
+ return 0;
}
/* FSI master support */
diff --git a/include/linux/fsi.h b/include/linux/fsi.h
index 273cbf6..efa55ba 100644
--- a/include/linux/fsi.h
+++ b/include/linux/fsi.h
@@ -21,6 +21,10 @@ struct fsi_device {
struct device dev;
u8 engine_type;
u8 version;
+ u8 unit;
+ struct fsi_slave *slave;
+ uint32_t addr;
+ uint32_t size;
};
struct fsi_device_id {
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 10/23] drivers/fsi: Add device read/write/peek API
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (8 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 09/23] drivers/fsi: scan slaves & register devices Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 11/23] drivers/fsi: Add master unscan Christopher Bostic
` (12 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: linux-arm-kernel
From: Jeremy Kerr <jk@ozlabs.org>
This change introduces the fsi device API: simple read, write and peek
accessors for the devices' address spaces.
Includes contributions from Chris Bostic <cbostic@linux.vnet.ibm.com>
and Edward A. James <eajames@us.ibm.com>.
Signed-off-by: Edward A. James <eajames@us.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/fsi/fsi-core.c | 33 +++++++++++++++++++++++++++++++++
include/linux/fsi.h | 7 ++++++-
2 files changed, 39 insertions(+), 1 deletion(-)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index a8faa89..4da0b030 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -32,6 +32,8 @@
#define FSI_SLAVE_CONF_CRC_MASK 0x0000000f
#define FSI_SLAVE_CONF_DATA_BITS 28
+#define FSI_PEEK_BASE 0x410
+
static const int engine_page_size = 0x400;
#define FSI_SLAVE_BASE 0x800
@@ -73,9 +75,40 @@ static int fsi_master_read(struct fsi_master *master, int link,
uint8_t slave_id, uint32_t addr, void *val, size_t size);
static int fsi_master_write(struct fsi_master *master, int link,
uint8_t slave_id, uint32_t addr, const void *val, size_t size);
+static int fsi_slave_read(struct fsi_slave *slave, uint32_t addr,
+ void *val, size_t size);
+static int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
+ const void *val, size_t size);
/* FSI endpoint-device support */
+int fsi_device_read(struct fsi_device *dev, uint32_t addr, void *val,
+ size_t size)
+{
+ if (addr > dev->size || size > dev->size || addr > dev->size - size)
+ return -EINVAL;
+
+ return fsi_slave_read(dev->slave, dev->addr + addr, val, size);
+}
+EXPORT_SYMBOL_GPL(fsi_device_read);
+
+int fsi_device_write(struct fsi_device *dev, uint32_t addr, const void *val,
+ size_t size)
+{
+ if (addr > dev->size || size > dev->size || addr > dev->size - size)
+ return -EINVAL;
+
+ return fsi_slave_write(dev->slave, dev->addr + addr, val, size);
+}
+EXPORT_SYMBOL_GPL(fsi_device_write);
+
+int fsi_device_peek(struct fsi_device *dev, void *val)
+{
+ uint32_t addr = FSI_PEEK_BASE + ((dev->unit - 2) * sizeof(uint32_t));
+
+ return fsi_slave_read(dev->slave, addr, val, sizeof(uint32_t));
+}
+
static void fsi_device_release(struct device *_device)
{
struct fsi_device *device = to_fsi_dev(_device);
diff --git a/include/linux/fsi.h b/include/linux/fsi.h
index efa55ba..66bce48 100644
--- a/include/linux/fsi.h
+++ b/include/linux/fsi.h
@@ -27,6 +27,12 @@ struct fsi_device {
uint32_t size;
};
+extern int fsi_device_read(struct fsi_device *dev, uint32_t addr,
+ void *val, size_t size);
+extern int fsi_device_write(struct fsi_device *dev, uint32_t addr,
+ const void *val, size_t size);
+extern int fsi_device_peek(struct fsi_device *dev, void *val);
+
struct fsi_device_id {
u8 engine_type;
u8 version;
@@ -40,7 +46,6 @@ struct fsi_device_id {
#define FSI_DEVICE_VERSIONED(t, v) \
.engine_type = (t), .version = (v),
-
struct fsi_driver {
struct device_driver drv;
const struct fsi_device_id *id_table;
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 11/23] drivers/fsi: Add master unscan
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (9 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 10/23] drivers/fsi: Add device read/write/peek API Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 12/23] drivers/fsi: Add documentation for GPIO bindings Christopher Bostic
` (11 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: linux-arm-kernel
From: Chris Bostic <cbostic@linux.vnet.ibm.com>
Allow a master to undo a previous scan. Should a master scan a bus
twice it will need to ensure it doesn't double register any
previously detected device.
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/fsi/fsi-core.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 4da0b030..75d2a88 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -69,6 +69,7 @@ struct fsi_slave {
uint32_t size; /* size of slave address space */
};
+#define to_fsi_master(d) container_of(d, struct fsi_master, dev)
#define to_fsi_slave(d) container_of(d, struct fsi_slave, dev)
static int fsi_master_read(struct fsi_master *master, int link,
@@ -491,6 +492,37 @@ static int fsi_master_scan(struct fsi_master *master)
return 0;
}
+static int __fsi_slave_remove_device(struct device *dev, void *arg)
+{
+ device_unregister(dev);
+ return 0;
+}
+
+static int __fsi_master_remove_slave(struct device *dev, void *arg)
+{
+ device_for_each_child(dev, NULL, __fsi_slave_remove_device);
+ device_unregister(dev);
+ return 0;
+}
+
+static void fsi_master_unscan(struct fsi_master *master)
+{
+ device_for_each_child(&master->dev, NULL, __fsi_master_remove_slave);
+}
+
+static ssize_t master_rescan_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct fsi_master *master = to_fsi_master(dev);
+
+ fsi_master_unscan(master);
+ fsi_master_scan(master);
+
+ return count;
+}
+
+static DEVICE_ATTR(rescan, 0200, NULL, master_rescan_store);
+
int fsi_master_register(struct fsi_master *master)
{
int rc;
@@ -507,7 +539,15 @@ int fsi_master_register(struct fsi_master *master)
return rc;
}
+ rc = device_create_file(&master->dev, &dev_attr_rescan);
+ if (rc) {
+ device_unregister(&master->dev);
+ ida_simple_remove(&master_ida, master->idx);
+ return rc;
+ }
+
fsi_master_scan(master);
+
return 0;
}
EXPORT_SYMBOL_GPL(fsi_master_register);
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 12/23] drivers/fsi: Add documentation for GPIO bindings
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (10 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 11/23] drivers/fsi: Add master unscan Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 13/23] drivers/fsi: Add client driver register utilities Christopher Bostic
` (10 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: linux-arm-kernel
From: Chris Bostic <cbostic@linux.vnet.ibm.com>
Add fsi master gpio device tree binding documentation
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/fsi/fsi-master-gpio.txt | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
new file mode 100644
index 0000000..a767259
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
@@ -0,0 +1,24 @@
+Device-tree bindings for gpio-based FSI master driver
+-----------------------------------------------------
+
+Required properties:
+ - compatible = "fsi-master-gpio";
+ - clock-gpios = <gpio-descriptor>; : GPIO for FSI clock
+ - data-gpios = <gpio-descriptor>; : GPIO for FSI data signal
+
+Optional properties:
+ - enable-gpios = <gpio-descriptor>; : GPIO for enable signal
+ - trans-gpios = <gpio-descriptor>; : GPIO for voltage translator enable
+ - mux-gpios = <gpio-descriptor>; : GPIO for pin multiplexing with other
+ functions (eg, external FSI masters)
+
+Examples:
+
+ fsi-master {
+ compatible = "fsi-master-gpio", "fsi-master";
+ clock-gpios = <&gpio 0>;
+ data-gpios = <&gpio 1>;
+ enable-gpios = <&gpio 2>;
+ trans-gpios = <&gpio 3>;
+ mux-gpios = <&gpio 4>;
+ }
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 13/23] drivers/fsi: Add client driver register utilities
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (11 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 12/23] drivers/fsi: Add documentation for GPIO bindings Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 14/23] drivers/fsi: Add sysfs files for FSI master & slave accesses Christopher Bostic
` (9 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: linux-arm-kernel
From: Chris Bostic <cbostic@linux.vnet.ibm.com>
Add driver_register and driver_unregister wrappers for FSI.
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/fsi/fsi-core.c | 17 +++++++++++++++++
include/linux/fsi.h | 12 ++++++++++++
2 files changed, 29 insertions(+)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 75d2a88..4359e26 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -585,6 +585,23 @@ static int fsi_bus_match(struct device *dev, struct device_driver *drv)
return 0;
}
+int fsi_driver_register(struct fsi_driver *fsi_drv)
+{
+ if (!fsi_drv)
+ return -EINVAL;
+ if (!fsi_drv->id_table)
+ return -EINVAL;
+
+ return driver_register(&fsi_drv->drv);
+}
+EXPORT_SYMBOL_GPL(fsi_driver_register);
+
+void fsi_driver_unregister(struct fsi_driver *fsi_drv)
+{
+ driver_unregister(&fsi_drv->drv);
+}
+EXPORT_SYMBOL_GPL(fsi_driver_unregister);
+
struct bus_type fsi_bus_type = {
.name = "fsi",
.match = fsi_bus_match,
diff --git a/include/linux/fsi.h b/include/linux/fsi.h
index 66bce48..34f1e9a 100644
--- a/include/linux/fsi.h
+++ b/include/linux/fsi.h
@@ -54,6 +54,18 @@ struct fsi_driver {
#define to_fsi_dev(devp) container_of(devp, struct fsi_device, dev)
#define to_fsi_drv(drvp) container_of(drvp, struct fsi_driver, drv)
+extern int fsi_driver_register(struct fsi_driver *fsi_drv);
+extern void fsi_driver_unregister(struct fsi_driver *fsi_drv);
+
+/* module_fsi_driver() - Helper macro for drivers that don't do
+ * anything special in module init/exit. This eliminates a lot of
+ * boilerplate. Each module may only use this macro once, and
+ * calling it replaces module_init() and module_exit()
+ */
+#define module_fsi_driver(__fsi_driver) \
+ module_driver(__fsi_driver, fsi_driver_register, \
+ fsi_driver_unregister)
+
extern struct bus_type fsi_bus_type;
#endif /* LINUX_FSI_H */
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 14/23] drivers/fsi: Add sysfs files for FSI master & slave accesses
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (12 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 13/23] drivers/fsi: Add client driver register utilities Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:05 ` [PATCH v5 15/23] drivers/fsi: expose direct-access slave API Christopher Bostic
` (8 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: linux-arm-kernel
From: Jeremy Kerr <jk@ozlabs.org>
This change adds a 'raw' file for reads & writes, and a 'term' file for
the TERM command, and a 'break' file for issuing a BREAK.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
---
drivers/fsi/fsi-core.c | 116 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 116 insertions(+)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 4359e26..f0f0556 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -294,6 +294,95 @@ static int fsi_slave_scan(struct fsi_slave *slave)
return 0;
}
+static ssize_t fsi_slave_sysfs_raw_read(struct file *file,
+ struct kobject *kobj, struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count)
+{
+ struct fsi_slave *slave = to_fsi_slave(kobj_to_dev(kobj));
+ size_t total_len, read_len;
+ int rc;
+
+ if (off < 0)
+ return -EINVAL;
+
+ if (off > 0xffffffff || count > 0xffffffff || off + count > 0xffffffff)
+ return -EINVAL;
+
+ for (total_len = 0; total_len < count; total_len += read_len) {
+ read_len = min_t(size_t, count, 4);
+ read_len -= off & 0x3;
+
+ rc = fsi_slave_read(slave, off, buf + total_len, read_len);
+ if (rc)
+ return rc;
+
+ off += read_len;
+ }
+
+ return count;
+}
+
+static ssize_t fsi_slave_sysfs_raw_write(struct file *file,
+ struct kobject *kobj, struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct fsi_slave *slave = to_fsi_slave(kobj_to_dev(kobj));
+ size_t total_len, write_len;
+ int rc;
+
+ if (off < 0)
+ return -EINVAL;
+
+ if (off > 0xffffffff || count > 0xffffffff || off + count > 0xffffffff)
+ return -EINVAL;
+
+ for (total_len = 0; total_len < count; total_len += write_len) {
+ write_len = min_t(size_t, count, 4);
+ write_len -= off & 0x3;
+
+ rc = fsi_slave_write(slave, off, buf + total_len, write_len);
+ if (rc)
+ return rc;
+
+ off += write_len;
+ }
+
+ return count;
+}
+
+static struct bin_attribute fsi_slave_raw_attr = {
+ .attr = {
+ .name = "raw",
+ .mode = 0600,
+ },
+ .size = 0,
+ .read = fsi_slave_sysfs_raw_read,
+ .write = fsi_slave_sysfs_raw_write,
+};
+
+static ssize_t fsi_slave_sysfs_term_write(struct file *file,
+ struct kobject *kobj, struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct fsi_slave *slave = to_fsi_slave(kobj_to_dev(kobj));
+ struct fsi_master *master = slave->master;
+
+ if (!master->term)
+ return -ENODEV;
+
+ master->term(master, slave->link, slave->id);
+ return count;
+}
+
+static struct bin_attribute fsi_slave_term_attr = {
+ .attr = {
+ .name = "term",
+ .mode = 0200,
+ },
+ .size = 0,
+ .write = fsi_slave_sysfs_term_write,
+};
+
/* Encode slave local bus echo delay */
static inline uint32_t fsi_smode_echodly(int x)
{
@@ -409,6 +498,14 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
return rc;
}
+ rc = device_create_bin_file(&slave->dev, &fsi_slave_raw_attr);
+ if (rc)
+ dev_warn(&slave->dev, "failed to create raw attr: %d\n", rc);
+
+ rc = device_create_bin_file(&slave->dev, &fsi_slave_term_attr);
+ if (rc)
+ dev_warn(&slave->dev, "failed to create term attr: %d\n", rc);
+
fsi_slave_scan(slave);
return 0;
}
@@ -523,6 +620,18 @@ static ssize_t master_rescan_store(struct device *dev,
static DEVICE_ATTR(rescan, 0200, NULL, master_rescan_store);
+static ssize_t master_break_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct fsi_master *master = to_fsi_master(dev);
+
+ fsi_master_break(master, 0);
+
+ return count;
+}
+
+static DEVICE_ATTR(break, 0200, NULL, master_break_store);
+
int fsi_master_register(struct fsi_master *master)
{
int rc;
@@ -546,6 +655,13 @@ int fsi_master_register(struct fsi_master *master)
return rc;
}
+ rc = device_create_file(&master->dev, &dev_attr_break);
+ if (rc) {
+ device_unregister(&master->dev);
+ ida_simple_remove(&master_ida, master->idx);
+ return rc;
+ }
+
fsi_master_scan(master);
return 0;
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 15/23] drivers/fsi: expose direct-access slave API
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (13 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 14/23] drivers/fsi: Add sysfs files for FSI master & slave accesses Christopher Bostic
@ 2017-04-05 2:05 ` Christopher Bostic
2017-04-05 2:06 ` [PATCH v5 16/23] drivers/fsi: Add tracepoints for low-level operations Christopher Bostic
` (7 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:05 UTC (permalink / raw)
To: linux-arm-kernel
From: Jeremy Kerr <jk@ozlabs.org>
Allow drivers to access the slave address ranges.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
---
drivers/fsi/fsi-core.c | 26 ++++++++++++++++++++------
include/linux/fsi.h | 12 ++++++++++++
2 files changed, 32 insertions(+), 6 deletions(-)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index f0f0556..f7e55e7 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -76,10 +76,6 @@ static int fsi_master_read(struct fsi_master *master, int link,
uint8_t slave_id, uint32_t addr, void *val, size_t size);
static int fsi_master_write(struct fsi_master *master, int link,
uint8_t slave_id, uint32_t addr, const void *val, size_t size);
-static int fsi_slave_read(struct fsi_slave *slave, uint32_t addr,
- void *val, size_t size);
-static int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
- const void *val, size_t size);
/* FSI endpoint-device support */
@@ -181,7 +177,7 @@ static int fsi_slave_calc_addr(struct fsi_slave *slave, uint32_t *addrp,
return 0;
}
-static int fsi_slave_read(struct fsi_slave *slave, uint32_t addr,
+int fsi_slave_read(struct fsi_slave *slave, uint32_t addr,
void *val, size_t size)
{
uint8_t id = slave->id;
@@ -195,7 +191,7 @@ static int fsi_slave_read(struct fsi_slave *slave, uint32_t addr,
addr, val, size);
}
-static int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
+int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
const void *val, size_t size)
{
uint8_t id = slave->id;
@@ -209,6 +205,24 @@ static int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
addr, val, size);
}
+extern int fsi_slave_claim_range(struct fsi_slave *slave,
+ uint32_t addr, uint32_t size)
+{
+ if (addr + size < addr)
+ return -EINVAL;
+
+ if (addr + size > slave->size)
+ return -EINVAL;
+
+ /* todo: check for overlapping claims */
+ return 0;
+}
+
+extern void fsi_slave_release_range(struct fsi_slave *slave,
+ uint32_t addr, uint32_t size)
+{
+}
+
static int fsi_slave_scan(struct fsi_slave *slave)
{
uint32_t engine_addr;
diff --git a/include/linux/fsi.h b/include/linux/fsi.h
index 34f1e9a..141fd38 100644
--- a/include/linux/fsi.h
+++ b/include/linux/fsi.h
@@ -66,6 +66,18 @@ struct fsi_driver {
module_driver(__fsi_driver, fsi_driver_register, \
fsi_driver_unregister)
+/* direct slave API */
+extern int fsi_slave_claim_range(struct fsi_slave *slave,
+ uint32_t addr, uint32_t size);
+extern void fsi_slave_release_range(struct fsi_slave *slave,
+ uint32_t addr, uint32_t size);
+extern int fsi_slave_read(struct fsi_slave *slave, uint32_t addr,
+ void *val, size_t size);
+extern int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
+ const void *val, size_t size);
+
+
+
extern struct bus_type fsi_bus_type;
#endif /* LINUX_FSI_H */
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 16/23] drivers/fsi: Add tracepoints for low-level operations
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (14 preceding siblings ...)
2017-04-05 2:05 ` [PATCH v5 15/23] drivers/fsi: expose direct-access slave API Christopher Bostic
@ 2017-04-05 2:06 ` Christopher Bostic
2017-04-05 2:06 ` [PATCH v5 17/23] drivers/fsi: Add error handling for slave communication errors Christopher Bostic
` (6 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:06 UTC (permalink / raw)
To: linux-arm-kernel
From: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
---
drivers/fsi/fsi-core.c | 27 +++++++---
include/trace/events/fsi.h | 127 +++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 148 insertions(+), 6 deletions(-)
create mode 100644 include/trace/events/fsi.h
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index f7e55e7..09becec 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -21,6 +21,9 @@
#include "fsi-master.h"
+#define CREATE_TRACE_POINTS
+#include <trace/events/fsi.h>
+
#define FSI_SLAVE_CONF_NEXT_MASK 0x80000000
#define FSI_SLAVE_CONF_SLOTS_MASK 0x00ff0000
#define FSI_SLAVE_CONF_SLOTS_SHIFT 16
@@ -541,11 +544,16 @@ static int fsi_master_read(struct fsi_master *master, int link,
{
int rc;
+ trace_fsi_master_read(master, link, slave_id, addr, size);
+
rc = fsi_check_access(addr, size);
- if (rc)
- return rc;
+ if (!rc)
+ rc = master->read(master, link, slave_id, addr, val, size);
+
+ trace_fsi_master_rw_result(master, link, slave_id, addr, size,
+ false, val, rc);
- return master->read(master, link, slave_id, addr, val, size);
+ return rc;
}
static int fsi_master_write(struct fsi_master *master, int link,
@@ -553,11 +561,16 @@ static int fsi_master_write(struct fsi_master *master, int link,
{
int rc;
+ trace_fsi_master_write(master, link, slave_id, addr, size, val);
+
rc = fsi_check_access(addr, size);
- if (rc)
- return rc;
+ if (!rc)
+ rc = master->write(master, link, slave_id, addr, val, size);
- return master->write(master, link, slave_id, addr, val, size);
+ trace_fsi_master_rw_result(master, link, slave_id, addr, size,
+ true, val, rc);
+
+ return rc;
}
static int fsi_master_link_enable(struct fsi_master *master, int link)
@@ -573,6 +586,8 @@ static int fsi_master_link_enable(struct fsi_master *master, int link)
*/
static int fsi_master_break(struct fsi_master *master, int link)
{
+ trace_fsi_master_break(master, link);
+
if (master->send_break)
return master->send_break(master, link);
diff --git a/include/trace/events/fsi.h b/include/trace/events/fsi.h
new file mode 100644
index 0000000..ac74a30
--- /dev/null
+++ b/include/trace/events/fsi.h
@@ -0,0 +1,127 @@
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM fsi
+
+#if !defined(_TRACE_FSI_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_FSI_H
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(fsi_master_read,
+ TP_PROTO(const struct fsi_master *master, int link, int id,
+ uint32_t addr, size_t size),
+ TP_ARGS(master, link, id, addr, size),
+ TP_STRUCT__entry(
+ __field(int, master_idx)
+ __field(int, link)
+ __field(int, id)
+ __field(__u32, addr)
+ __field(size_t, size)
+ ),
+ TP_fast_assign(
+ __entry->master_idx = master->idx;
+ __entry->link = link;
+ __entry->id = id;
+ __entry->addr = addr;
+ __entry->size = size;
+ ),
+ TP_printk("fsi%d:%02d:%02d %08x[%zd]",
+ __entry->master_idx,
+ __entry->link,
+ __entry->id,
+ __entry->addr,
+ __entry->size
+ )
+);
+
+TRACE_EVENT(fsi_master_write,
+ TP_PROTO(const struct fsi_master *master, int link, int id,
+ uint32_t addr, size_t size, const void *data),
+ TP_ARGS(master, link, id, addr, size, data),
+ TP_STRUCT__entry(
+ __field(int, master_idx)
+ __field(int, link)
+ __field(int, id)
+ __field(__u32, addr)
+ __field(size_t, size)
+ __field(__u32, data)
+ ),
+ TP_fast_assign(
+ __entry->master_idx = master->idx;
+ __entry->link = link;
+ __entry->id = id;
+ __entry->addr = addr;
+ __entry->size = size;
+ __entry->data = 0;
+ memcpy(&__entry->data, data, size);
+ ),
+ TP_printk("fsi%d:%02d:%02d %08x[%zd] <= {%*ph}",
+ __entry->master_idx,
+ __entry->link,
+ __entry->id,
+ __entry->addr,
+ __entry->size,
+ __entry->size, &__entry->data
+ )
+);
+
+TRACE_EVENT(fsi_master_rw_result,
+ TP_PROTO(const struct fsi_master *master, int link, int id,
+ uint32_t addr, size_t size,
+ bool write, const void *data, int ret),
+ TP_ARGS(master, link, id, addr, size, write, data, ret),
+ TP_STRUCT__entry(
+ __field(int, master_idx)
+ __field(int, link)
+ __field(int, id)
+ __field(__u32, addr)
+ __field(size_t, size)
+ __field(bool, write)
+ __field(__u32, data)
+ __field(int, ret)
+ ),
+ TP_fast_assign(
+ __entry->master_idx = master->idx;
+ __entry->link = link;
+ __entry->id = id;
+ __entry->addr = addr;
+ __entry->size = size;
+ __entry->write = write;
+ __entry->data = 0;
+ __entry->ret = ret;
+ if (__entry->write || !__entry->ret)
+ memcpy(&__entry->data, data, size);
+ ),
+ TP_printk("fsi%d:%02d:%02d %08x[%zd] %s {%*ph} ret %d",
+ __entry->master_idx,
+ __entry->link,
+ __entry->id,
+ __entry->addr,
+ __entry->size,
+ __entry->write ? "<=" : "=>",
+ __entry->size, &__entry->data,
+ __entry->ret
+ )
+);
+
+TRACE_EVENT(fsi_master_break,
+ TP_PROTO(const struct fsi_master *master, int link),
+ TP_ARGS(master, link),
+ TP_STRUCT__entry(
+ __field(int, master_idx)
+ __field(int, link)
+ ),
+ TP_fast_assign(
+ __entry->master_idx = master->idx;
+ __entry->link = link;
+ ),
+ TP_printk("fsi%d:%d",
+ __entry->master_idx,
+ __entry->link
+ )
+);
+
+
+#endif /* _TRACE_FSI_H */
+
+#include <trace/define_trace.h>
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 17/23] drivers/fsi: Add error handling for slave communication errors
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (15 preceding siblings ...)
2017-04-05 2:06 ` [PATCH v5 16/23] drivers/fsi: Add tracepoints for low-level operations Christopher Bostic
@ 2017-04-05 2:06 ` Christopher Bostic
2017-04-05 2:06 ` [PATCH v5 18/23] drivers/fsi: Document FSI master sysfs files in ABI Christopher Bostic
` (5 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:06 UTC (permalink / raw)
To: linux-arm-kernel
From: Jeremy Kerr <jk@ozlabs.org>
This change implements error handling in the FSI core, by cleaning up
and retrying failed operations, using the SISC, TERM and BREAK
facilities.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
---
drivers/fsi/fsi-core.c | 121 ++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 114 insertions(+), 7 deletions(-)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 09becec..747d0e3 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -44,7 +44,9 @@
/*
* FSI slave engine control register offsets
*/
-#define FSI_SMODE 0x0 /* R/W: Mode register */
+#define FSI_SMODE 0x0 /* R/W: Mode register */
+#define FSI_SISC 0x8 /* R/W: Interrupt condition */
+#define FSI_SSTAT 0x14 /* R : Slave status */
/*
* SMODE fields
@@ -75,10 +77,14 @@ struct fsi_slave {
#define to_fsi_master(d) container_of(d, struct fsi_master, dev)
#define to_fsi_slave(d) container_of(d, struct fsi_slave, dev)
+static const int slave_retries = 2;
+static int discard_errors;
+
static int fsi_master_read(struct fsi_master *master, int link,
uint8_t slave_id, uint32_t addr, void *val, size_t size);
static int fsi_master_write(struct fsi_master *master, int link,
uint8_t slave_id, uint32_t addr, const void *val, size_t size);
+static int fsi_master_break(struct fsi_master *master, int link);
/* FSI endpoint-device support */
@@ -180,32 +186,131 @@ static int fsi_slave_calc_addr(struct fsi_slave *slave, uint32_t *addrp,
return 0;
}
+int fsi_slave_report_and_clear_errors(struct fsi_slave *slave)
+{
+ struct fsi_master *master = slave->master;
+ uint32_t irq, stat;
+ int rc, link;
+ uint8_t id;
+
+ link = slave->link;
+ id = slave->id;
+
+ rc = fsi_master_read(master, link, id, FSI_SLAVE_BASE + FSI_SISC,
+ &irq, sizeof(irq));
+ if (rc)
+ return rc;
+
+ rc = fsi_master_read(master, link, id, FSI_SLAVE_BASE + FSI_SSTAT,
+ &stat, sizeof(stat));
+ if (rc)
+ return rc;
+
+ dev_info(&slave->dev, "status: 0x%08x, sisc: 0x%08x\n",
+ be32_to_cpu(stat), be32_to_cpu(irq));
+
+ /* clear interrupts */
+ return fsi_master_write(master, link, id, FSI_SLAVE_BASE + FSI_SISC,
+ &irq, sizeof(irq));
+}
+
+static int fsi_slave_set_smode(struct fsi_master *master, int link, int id);
+
+int fsi_slave_handle_error(struct fsi_slave *slave, bool write, uint32_t addr,
+ size_t size)
+{
+ struct fsi_master *master = slave->master;
+ int rc, link;
+ uint32_t reg;
+ uint8_t id;
+
+ if (discard_errors)
+ return -1;
+
+ link = slave->link;
+ id = slave->id;
+
+ dev_dbg(&slave->dev, "handling error on %s to 0x%08x[%zd]",
+ write ? "write" : "read", addr, size);
+
+ /* try a simple clear of error conditions, which may fail if we've lost
+ * communication with the slave
+ */
+ rc = fsi_slave_report_and_clear_errors(slave);
+ if (!rc)
+ return 0;
+
+ /* send a TERM and retry */
+ if (master->term) {
+ rc = master->term(master, link, id);
+ if (!rc) {
+ rc = fsi_master_read(master, link, id, 0,
+ ®, sizeof(reg));
+ if (!rc)
+ rc = fsi_slave_report_and_clear_errors(slave);
+ if (!rc)
+ return 0;
+ }
+ }
+
+ /* getting serious, reset the slave via BREAK */
+ rc = fsi_master_break(master, link);
+ if (rc)
+ return rc;
+
+ rc = fsi_slave_set_smode(master, link, id);
+ if (rc)
+ return rc;
+
+ return fsi_slave_report_and_clear_errors(slave);
+}
+
int fsi_slave_read(struct fsi_slave *slave, uint32_t addr,
void *val, size_t size)
{
uint8_t id = slave->id;
- int rc;
+ int rc, err_rc, i;
rc = fsi_slave_calc_addr(slave, &addr, &id);
if (rc)
return rc;
- return fsi_master_read(slave->master, slave->link, id,
- addr, val, size);
+ for (i = 0; i < slave_retries; i++) {
+ rc = fsi_master_read(slave->master, slave->link,
+ id, addr, val, size);
+ if (!rc)
+ break;
+
+ err_rc = fsi_slave_handle_error(slave, false, addr, size);
+ if (err_rc)
+ break;
+ }
+
+ return rc;
}
int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
const void *val, size_t size)
{
uint8_t id = slave->id;
- int rc;
+ int rc, err_rc, i;
rc = fsi_slave_calc_addr(slave, &addr, &id);
if (rc)
return rc;
- return fsi_master_write(slave->master, slave->link, id,
- addr, val, size);
+ for (i = 0; i < slave_retries; i++) {
+ rc = fsi_master_write(slave->master, slave->link,
+ id, addr, val, size);
+ if (!rc)
+ break;
+
+ err_rc = fsi_slave_handle_error(slave, true, addr, size);
+ if (err_rc)
+ break;
+ }
+
+ return rc;
}
extern int fsi_slave_claim_range(struct fsi_slave *slave,
@@ -765,3 +870,5 @@ static void fsi_exit(void)
module_init(fsi_init);
module_exit(fsi_exit);
+module_param(discard_errors, int, 0664);
+MODULE_PARM_DESC(discard_errors, "Don't invoke error handling on bus accesses");
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 18/23] drivers/fsi: Document FSI master sysfs files in ABI
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (16 preceding siblings ...)
2017-04-05 2:06 ` [PATCH v5 17/23] drivers/fsi: Add error handling for slave communication errors Christopher Bostic
@ 2017-04-05 2:06 ` Christopher Bostic
2017-04-05 2:06 ` [PATCH v5 19/23] drivers/fsi: Add GPIO based FSI master Christopher Bostic
` (4 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:06 UTC (permalink / raw)
To: linux-arm-kernel
From: Chris Bostic <cbostic@linux.vnet.ibm.com>
Add info for sysfs scan file in Documentaiton ABI/testing
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
---
Documentation/ABI/testing/sysfs-bus-fsi | 6 ++++++
1 file changed, 6 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-fsi
diff --git a/Documentation/ABI/testing/sysfs-bus-fsi b/Documentation/ABI/testing/sysfs-bus-fsi
new file mode 100644
index 0000000..dfcbc1b
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-fsi
@@ -0,0 +1,6 @@
+What: /sys/bus/platform/devices/fsi-master/scan
+KernelVersion: 4.9
+Contact: cbostic at us.ibm.com
+Description:
+ Initiates a FSI master scan for all connected
+ slave devices on its links.
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 19/23] drivers/fsi: Add GPIO based FSI master
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (17 preceding siblings ...)
2017-04-05 2:06 ` [PATCH v5 18/23] drivers/fsi: Document FSI master sysfs files in ABI Christopher Bostic
@ 2017-04-05 2:06 ` Christopher Bostic
2017-04-05 16:35 ` Randy Dunlap
2017-04-05 2:06 ` [PATCH v5 20/23] drivers/fsi/gpio: Add tracepoints for GPIO master Christopher Bostic
` (3 subsequent siblings)
22 siblings, 1 reply; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:06 UTC (permalink / raw)
To: linux-arm-kernel
From: Chris Bostic <cbostic@linux.vnet.ibm.com>
Implement a FSI master using GPIO. Will generate FSI protocol for
read and write commands to particular addresses. Sends master command
and waits for and decodes a slave response.
Includes changes from Edward A. James <eajames@us.ibm.com> and Jeremy
Kerr <jk@ozlabs.org>.
Signed-off-by: Edward A. James <eajames@us.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/fsi/Kconfig | 11 +
drivers/fsi/Makefile | 1 +
drivers/fsi/fsi-master-gpio.c | 610 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 622 insertions(+)
create mode 100644 drivers/fsi/fsi-master-gpio.c
diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
index 04c1a0e..9cf8345 100644
--- a/drivers/fsi/Kconfig
+++ b/drivers/fsi/Kconfig
@@ -9,4 +9,15 @@ config FSI
---help---
FSI - the FRU Support Interface - is a simple bus for low-level
access to POWER-based hardware.
+
+if FSI
+
+config FSI_MASTER_GPIO
+ tristate "GPIO-based FSI master"
+ depends on FSI && GPIOLIB
+ ---help---
+ This option enables a FSI master driver using GPIO lines.
+
+endif
+
endmenu
diff --git a/drivers/fsi/Makefile b/drivers/fsi/Makefile
index db0e5e7..ed28ac0 100644
--- a/drivers/fsi/Makefile
+++ b/drivers/fsi/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_FSI) += fsi-core.o
+obj-$(CONFIG_FSI_MASTER_GPIO) += fsi-master-gpio.o
diff --git a/drivers/fsi/fsi-master-gpio.c b/drivers/fsi/fsi-master-gpio.c
new file mode 100644
index 0000000..9fedfaf
--- /dev/null
+++ b/drivers/fsi/fsi-master-gpio.c
@@ -0,0 +1,610 @@
+/*
+ * A FSI master controller, using a simple GPIO bit-banging interface
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/fsi.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include "fsi-master.h"
+
+#define FSI_GPIO_STD_DLY 1 /* Standard pin delay in nS */
+#define FSI_ECHO_DELAY_CLOCKS 16 /* Number clocks for echo delay */
+#define FSI_PRE_BREAK_CLOCKS 50 /* Number clocks to prep for break */
+#define FSI_BREAK_CLOCKS 256 /* Number of clocks to issue break */
+#define FSI_POST_BREAK_CLOCKS 16000 /* Number clocks to set up cfam */
+#define FSI_INIT_CLOCKS 5000 /* Clock out any old data */
+#define FSI_GPIO_STD_DELAY 10 /* Standard GPIO delay in nS */
+ /* todo: adjust down as low as */
+ /* possible or eliminate */
+#define FSI_GPIO_CMD_DPOLL 0x2
+#define FSI_GPIO_CMD_TERM 0x3f
+#define FSI_GPIO_CMD_ABS_AR 0x4
+
+#define FSI_GPIO_DPOLL_CLOCKS 100 /* < 21 will cause slave to hang */
+
+/* Bus errors */
+#define FSI_GPIO_ERR_BUSY 1 /* Slave stuck in busy state */
+#define FSI_GPIO_RESP_ERRA 2 /* Any (misc) Error */
+#define FSI_GPIO_RESP_ERRC 3 /* Slave reports master CRC error */
+#define FSI_GPIO_MTOE 4 /* Master time out error */
+#define FSI_GPIO_CRC_INVAL 5 /* Master reports slave CRC error */
+
+/* Normal slave responses */
+#define FSI_GPIO_RESP_BUSY 1
+#define FSI_GPIO_RESP_ACK 0
+#define FSI_GPIO_RESP_ACKD 4
+
+#define FSI_GPIO_MAX_BUSY 100
+#define FSI_GPIO_MTOE_COUNT 1000
+#define FSI_GPIO_DRAIN_BITS 20
+#define FSI_GPIO_CRC_SIZE 4
+#define FSI_GPIO_MSG_ID_SIZE 2
+#define FSI_GPIO_MSG_RESPID_SIZE 2
+#define FSI_GPIO_PRIME_SLAVE_CLOCKS 100
+
+static DEFINE_SPINLOCK(fsi_gpio_cmd_lock); /* lock around fsi commands */
+
+struct fsi_master_gpio {
+ struct fsi_master master;
+ struct device *dev;
+ struct gpio_desc *gpio_clk;
+ struct gpio_desc *gpio_data;
+ struct gpio_desc *gpio_trans; /* Voltage translator */
+ struct gpio_desc *gpio_enable; /* FSI enable */
+ struct gpio_desc *gpio_mux; /* Mux control */
+};
+
+#define to_fsi_master_gpio(m) container_of(m, struct fsi_master_gpio, master)
+
+struct fsi_gpio_msg {
+ uint64_t msg;
+ uint8_t bits;
+};
+
+static void clock_toggle(struct fsi_master_gpio *master, int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++) {
+ ndelay(FSI_GPIO_STD_DLY);
+ gpiod_set_value(master->gpio_clk, 0);
+ ndelay(FSI_GPIO_STD_DLY);
+ gpiod_set_value(master->gpio_clk, 1);
+ }
+}
+
+static int sda_in(struct fsi_master_gpio *master)
+{
+ int in;
+
+ ndelay(FSI_GPIO_STD_DLY);
+ in = gpiod_get_value(master->gpio_data);
+ return in ? 1 : 0;
+}
+
+static void sda_out(struct fsi_master_gpio *master, int value)
+{
+ gpiod_set_value(master->gpio_data, value);
+}
+
+static void set_sda_input(struct fsi_master_gpio *master)
+{
+ gpiod_direction_input(master->gpio_data);
+ if (master->gpio_trans)
+ gpiod_set_value(master->gpio_trans, 0);
+}
+
+static void set_sda_output(struct fsi_master_gpio *master, int value)
+{
+ if (master->gpio_trans)
+ gpiod_set_value(master->gpio_trans, 1);
+ gpiod_direction_output(master->gpio_data, value);
+}
+
+static void clock_zeros(struct fsi_master_gpio *master, int count)
+{
+ set_sda_output(master, 1);
+ clock_toggle(master, count);
+}
+
+static void serial_in(struct fsi_master_gpio *master, struct fsi_gpio_msg *msg,
+ uint8_t num_bits)
+{
+ uint8_t bit, in_bit;
+
+ set_sda_input(master);
+
+ for (bit = 0; bit < num_bits; bit++) {
+ clock_toggle(master, 1);
+ in_bit = sda_in(master);
+ msg->msg <<= 1;
+ msg->msg |= ~in_bit & 0x1; /* Data is negative active */
+ }
+ msg->bits += num_bits;
+}
+
+static void serial_out(struct fsi_master_gpio *master,
+ const struct fsi_gpio_msg *cmd)
+{
+ uint8_t bit;
+ uint64_t msg = ~cmd->msg; /* Data is negative active */
+ uint64_t sda_mask = 0x1ULL << (cmd->bits - 1);
+ uint64_t last_bit = ~0;
+ int next_bit;
+
+ if (!cmd->bits) {
+ dev_warn(master->dev, "trying to output 0 bits\n");
+ return;
+ }
+ set_sda_output(master, 0);
+
+ /* Send the start bit */
+ sda_out(master, 0);
+ clock_toggle(master, 1);
+
+ /* Send the message */
+ for (bit = 0; bit < cmd->bits; bit++) {
+ next_bit = (msg & sda_mask) >> (cmd->bits - 1);
+ if (last_bit ^ next_bit) {
+ sda_out(master, next_bit);
+ last_bit = next_bit;
+ }
+ clock_toggle(master, 1);
+ msg <<= 1;
+ }
+}
+
+static void msg_push_bits(struct fsi_gpio_msg *msg, uint64_t data, int bits)
+{
+ msg->msg <<= bits;
+ msg->msg |= data & ((1ull << bits) - 1);
+ msg->bits += bits;
+}
+
+static void msg_push_crc(struct fsi_gpio_msg *msg)
+{
+ uint8_t crc;
+ int top;
+
+ top = msg->bits & 0x3;
+
+ /* start bit, and any non-aligned top bits */
+ crc = fsi_crc4(0,
+ 1 << top | msg->msg >> (msg->bits - top),
+ top + 1);
+
+ /* aligned bits */
+ crc = fsi_crc4(crc, msg->msg, msg->bits - top);
+
+ msg_push_bits(msg, crc, 4);
+}
+
+static void build_abs_ar_command(struct fsi_gpio_msg *cmd,
+ uint8_t id, uint32_t addr, size_t size, const void *data)
+{
+ bool write = !!data;
+ uint8_t ds;
+ int i;
+
+ cmd->bits = 0;
+ cmd->msg = 0;
+
+ msg_push_bits(cmd, id, 2);
+ msg_push_bits(cmd, FSI_GPIO_CMD_ABS_AR, 3);
+ msg_push_bits(cmd, write ? 0 : 1, 1);
+
+ /*
+ * The read/write size is encoded in the lower bits of the address
+ * (as it must be naturally-aligned), and the following ds bit.
+ *
+ * size addr:1 addr:0 ds
+ * 1 x x 0
+ * 2 x 0 1
+ * 4 0 1 1
+ *
+ */
+ ds = size > 1 ? 1 : 0;
+ addr &= ~(size - 1);
+ if (size == 4)
+ addr |= 1;
+
+ msg_push_bits(cmd, addr & ((1 << 21) - 1), 21);
+ msg_push_bits(cmd, ds, 1);
+ for (i = 0; write && i < size; i++)
+ msg_push_bits(cmd, ((uint8_t *)data)[i], 8);
+
+ msg_push_crc(cmd);
+}
+
+static void build_dpoll_command(struct fsi_gpio_msg *cmd, uint8_t slave_id)
+{
+ cmd->bits = 0;
+ cmd->msg = 0;
+
+ msg_push_bits(cmd, slave_id, 2);
+ msg_push_bits(cmd, FSI_GPIO_CMD_DPOLL, 3);
+ msg_push_crc(cmd);
+}
+
+static void echo_delay(struct fsi_master_gpio *master)
+{
+ set_sda_output(master, 1);
+ clock_toggle(master, FSI_ECHO_DELAY_CLOCKS);
+}
+
+static void build_term_command(struct fsi_gpio_msg *cmd, uint8_t slave_id)
+{
+ cmd->bits = 0;
+ cmd->msg = 0;
+
+ msg_push_bits(cmd, slave_id, 2);
+ msg_push_bits(cmd, FSI_GPIO_CMD_TERM, 6);
+ msg_push_crc(cmd);
+}
+
+/*
+ * Store information on master errors so handler can detect and clean
+ * up the bus
+ */
+static void fsi_master_gpio_error(struct fsi_master_gpio *master, int error)
+{
+
+}
+
+static int read_one_response(struct fsi_master_gpio *master,
+ uint8_t data_size, struct fsi_gpio_msg *msgp, uint8_t *tagp)
+{
+ struct fsi_gpio_msg msg;
+ uint8_t id, tag;
+ uint32_t crc;
+ int i;
+
+ /* wait for the start bit */
+ for (i = 0; i < FSI_GPIO_MTOE_COUNT; i++) {
+ msg.bits = 0;
+ msg.msg = 0;
+ serial_in(master, &msg, 1);
+ if (msg.msg)
+ break;
+ }
+ if (i >= FSI_GPIO_MTOE_COUNT) {
+ dev_dbg(master->dev,
+ "Master time out waiting for response\n");
+ fsi_master_gpio_error(master, FSI_GPIO_MTOE);
+ return -EIO;
+ }
+
+ msg.bits = 0;
+ msg.msg = 0;
+
+ /* Read slave ID & response tag */
+ serial_in(master, &msg, 4);
+
+ id = (msg.msg >> FSI_GPIO_MSG_RESPID_SIZE) & 0x3;
+ tag = msg.msg & 0x3;
+
+ /* if we have an ACK, and we're expecting data, clock the
+ * data in too
+ */
+ if (tag == FSI_GPIO_RESP_ACK && data_size)
+ serial_in(master, &msg, data_size * 8);
+
+ /* read CRC */
+ serial_in(master, &msg, FSI_GPIO_CRC_SIZE);
+
+ /* we have a whole message now; check CRC */
+ crc = fsi_crc4(0, 1, 1);
+ crc = fsi_crc4(crc, msg.msg, msg.bits);
+ if (crc) {
+ dev_dbg(master->dev, "ERR response CRC\n");
+ fsi_master_gpio_error(master, FSI_GPIO_CRC_INVAL);
+ return -EIO;
+ }
+
+ if (msgp)
+ *msgp = msg;
+ if (tagp)
+ *tagp = tag;
+
+ return 0;
+}
+
+static int issue_term(struct fsi_master_gpio *master, uint8_t slave)
+{
+ struct fsi_gpio_msg cmd;
+ uint8_t tag;
+ int rc;
+
+ build_term_command(&cmd, slave);
+ serial_out(master, &cmd);
+ echo_delay(master);
+
+ rc = read_one_response(master, 0, NULL, &tag);
+ if (rc) {
+ dev_err(master->dev,
+ "TERM failed; lost communication with slave\n");
+ return -EIO;
+ } else if (tag != FSI_GPIO_RESP_ACK) {
+ dev_err(master->dev, "TERM failed; response %d\n", tag);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int poll_for_response(struct fsi_master_gpio *master,
+ uint8_t slave, uint8_t size, void *data)
+{
+ struct fsi_gpio_msg response, cmd;
+ int busy_count = 0, rc, i;
+ uint8_t tag;
+
+retry:
+ rc = read_one_response(master, size, &response, &tag);
+ if (rc)
+ return rc;
+
+ switch (tag) {
+ case FSI_GPIO_RESP_ACK:
+ if (size && data) {
+ uint64_t val = response.msg;
+ /* clear crc & mask */
+ val >>= 4;
+ val &= (1ull << (size * 8)) - 1;
+
+ for (i = 0; i < size; i++) {
+ ((uint8_t *)data)[size-i-1] =
+ val & 0xff;
+ val >>= 8;
+ }
+ }
+ break;
+ case FSI_GPIO_RESP_BUSY:
+ /*
+ * Its necessary to clock slave before issuing
+ * d-poll, not indicated in the hardware protocol
+ * spec. < 20 clocks causes slave to hang, 21 ok.
+ */
+ clock_zeros(master, FSI_GPIO_DPOLL_CLOCKS);
+ if (busy_count++ < FSI_GPIO_MAX_BUSY) {
+ build_dpoll_command(&cmd, slave);
+ serial_out(master, &cmd);
+ echo_delay(master);
+ goto retry;
+ }
+ dev_warn(master->dev,
+ "ERR slave is stuck in busy state, issuing TERM\n");
+ issue_term(master, slave);
+ rc = -EIO;
+ break;
+
+ case FSI_GPIO_RESP_ERRA:
+ case FSI_GPIO_RESP_ERRC:
+ dev_dbg(master->dev, "ERR%c received: 0x%x\n",
+ tag == FSI_GPIO_RESP_ERRA ? 'A' : 'C',
+ (int)response.msg);
+ fsi_master_gpio_error(master, response.msg);
+ rc = -EIO;
+ break;
+ }
+
+ /* Clock the slave enough to be ready for next operation */
+ clock_zeros(master, FSI_GPIO_PRIME_SLAVE_CLOCKS);
+ return rc;
+}
+
+static int fsi_master_gpio_xfer(struct fsi_master_gpio *master, uint8_t slave,
+ struct fsi_gpio_msg *cmd, size_t resp_len, void *resp)
+{
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&fsi_gpio_cmd_lock, flags);
+ serial_out(master, cmd);
+ echo_delay(master);
+ rc = poll_for_response(master, slave, resp_len, resp);
+ spin_unlock_irqrestore(&fsi_gpio_cmd_lock, flags);
+
+ return rc;
+}
+
+static int fsi_master_gpio_read(struct fsi_master *_master, int link,
+ uint8_t id, uint32_t addr, void *val, size_t size)
+{
+ struct fsi_master_gpio *master = to_fsi_master_gpio(_master);
+ struct fsi_gpio_msg cmd;
+
+ if (link != 0)
+ return -ENODEV;
+
+ build_abs_ar_command(&cmd, id, addr, size, NULL);
+ return fsi_master_gpio_xfer(master, id, &cmd, size, val);
+}
+
+static int fsi_master_gpio_write(struct fsi_master *_master, int link,
+ uint8_t id, uint32_t addr, const void *val, size_t size)
+{
+ struct fsi_master_gpio *master = to_fsi_master_gpio(_master);
+ struct fsi_gpio_msg cmd;
+
+ if (link != 0)
+ return -ENODEV;
+
+ build_abs_ar_command(&cmd, id, addr, size, val);
+ return fsi_master_gpio_xfer(master, id, &cmd, 0, NULL);
+}
+
+static int fsi_master_gpio_term(struct fsi_master *_master,
+ int link, uint8_t id)
+{
+ struct fsi_master_gpio *master = to_fsi_master_gpio(_master);
+ struct fsi_gpio_msg cmd;
+
+ if (link != 0)
+ return -ENODEV;
+
+ build_term_command(&cmd, id);
+ return fsi_master_gpio_xfer(master, id, &cmd, 0, NULL);
+}
+
+/*
+ * Issue a break command on link
+ */
+static int fsi_master_gpio_break(struct fsi_master *_master, int link)
+{
+ struct fsi_master_gpio *master = to_fsi_master_gpio(_master);
+
+ if (link != 0)
+ return -ENODEV;
+
+ set_sda_output(master, 1);
+ sda_out(master, 1);
+ clock_toggle(master, FSI_PRE_BREAK_CLOCKS);
+ sda_out(master, 0);
+ clock_toggle(master, FSI_BREAK_CLOCKS);
+ echo_delay(master);
+ sda_out(master, 1);
+ clock_toggle(master, FSI_POST_BREAK_CLOCKS);
+
+ /* Wait for logic reset to take effect */
+ udelay(200);
+
+ return 0;
+}
+
+static void fsi_master_gpio_init(struct fsi_master_gpio *master)
+{
+ if (master->gpio_mux)
+ gpiod_direction_output(master->gpio_mux, 1);
+ if (master->gpio_trans)
+ gpiod_direction_output(master->gpio_trans, 1);
+ if (master->gpio_enable)
+ gpiod_direction_output(master->gpio_enable, 1);
+ gpiod_direction_output(master->gpio_clk, 1);
+ gpiod_direction_output(master->gpio_data, 1);
+
+ /* todo: evaluate if clocks can be reduced */
+ clock_zeros(master, FSI_INIT_CLOCKS);
+}
+
+static int fsi_master_gpio_link_enable(struct fsi_master *_master, int link)
+{
+ struct fsi_master_gpio *master = to_fsi_master_gpio(_master);
+
+ if (link != 0)
+ return -ENODEV;
+ if (master->gpio_enable)
+ gpiod_set_value(master->gpio_enable, 1);
+
+ return 0;
+}
+
+static void fsi_master_gpio_release(struct device *dev)
+{
+}
+
+static int fsi_master_gpio_probe(struct platform_device *pdev)
+{
+ struct fsi_master_gpio *master;
+ struct gpio_desc *gpio;
+
+ master = devm_kzalloc(&pdev->dev, sizeof(*master), GFP_KERNEL);
+ if (!master)
+ return -ENOMEM;
+
+ master->dev = &pdev->dev;
+ master->master.dev.parent = master->dev;
+ master->master.dev.release = fsi_master_gpio_release;
+
+ gpio = devm_gpiod_get(&pdev->dev, "clock", 0);
+ if (IS_ERR(gpio)) {
+ dev_err(&pdev->dev, "failed to get clock gpio\n");
+ return PTR_ERR(gpio);
+ }
+ master->gpio_clk = gpio;
+
+ gpio = devm_gpiod_get(&pdev->dev, "data", 0);
+ if (IS_ERR(gpio)) {
+ dev_err(&pdev->dev, "failed to get data gpio\n");
+ return PTR_ERR(gpio);
+ }
+ master->gpio_data = gpio;
+
+ /* Optional GPIOs */
+ gpio = devm_gpiod_get_optional(&pdev->dev, "trans", 0);
+ if (IS_ERR(gpio)) {
+ dev_err(&pdev->dev, "failed to get trans gpio\n");
+ return PTR_ERR(gpio);
+ }
+ master->gpio_trans = gpio;
+
+ gpio = devm_gpiod_get_optional(&pdev->dev, "enable", 0);
+ if (IS_ERR(gpio)) {
+ dev_err(&pdev->dev, "failed to get enable gpio\n");
+ return PTR_ERR(gpio);
+ }
+ master->gpio_enable = gpio;
+
+ gpio = devm_gpiod_get_optional(&pdev->dev, "mux", 0);
+ if (IS_ERR(gpio)) {
+ dev_err(&pdev->dev, "failed to get mux gpio\n");
+ return PTR_ERR(gpio);
+ }
+ master->gpio_mux = gpio;
+
+ master->master.n_links = 1;
+ master->master.read = fsi_master_gpio_read;
+ master->master.write = fsi_master_gpio_write;
+ master->master.term = fsi_master_gpio_term;
+ master->master.send_break = fsi_master_gpio_break;
+ master->master.link_enable = fsi_master_gpio_link_enable;
+ platform_set_drvdata(pdev, master);
+
+ fsi_master_gpio_init(master);
+
+ fsi_master_register(&master->master);
+
+ return 0;
+}
+
+
+static int fsi_master_gpio_remove(struct platform_device *pdev)
+{
+ struct fsi_master_gpio *master = platform_get_drvdata(pdev);
+
+ devm_gpiod_put(&pdev->dev, master->gpio_clk);
+ devm_gpiod_put(&pdev->dev, master->gpio_data);
+ if (master->gpio_trans)
+ devm_gpiod_put(&pdev->dev, master->gpio_trans);
+ if (master->gpio_enable)
+ devm_gpiod_put(&pdev->dev, master->gpio_enable);
+ if (master->gpio_mux)
+ devm_gpiod_put(&pdev->dev, master->gpio_mux);
+ fsi_master_unregister(&master->master);
+
+ return 0;
+}
+
+static const struct of_device_id fsi_master_gpio_match[] = {
+ { .compatible = "fsi-master-gpio" },
+ { },
+};
+
+static struct platform_driver fsi_master_gpio_driver = {
+ .driver = {
+ .name = "fsi-master-gpio",
+ .of_match_table = fsi_master_gpio_match,
+ },
+ .probe = fsi_master_gpio_probe,
+ .remove = fsi_master_gpio_remove,
+};
+
+module_platform_driver(fsi_master_gpio_driver);
+MODULE_LICENSE("GPL");
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 19/23] drivers/fsi: Add GPIO based FSI master
2017-04-05 2:06 ` [PATCH v5 19/23] drivers/fsi: Add GPIO based FSI master Christopher Bostic
@ 2017-04-05 16:35 ` Randy Dunlap
2017-04-09 21:04 ` Christopher Bostic
0 siblings, 1 reply; 30+ messages in thread
From: Randy Dunlap @ 2017-04-05 16:35 UTC (permalink / raw)
To: linux-arm-kernel
On 04/04/17 19:06, Christopher Bostic wrote:
> From: Chris Bostic <cbostic@linux.vnet.ibm.com>
>
> Implement a FSI master using GPIO. Will generate FSI protocol for
> read and write commands to particular addresses. Sends master command
> and waits for and decodes a slave response.
>
> Includes changes from Edward A. James <eajames@us.ibm.com> and Jeremy
> Kerr <jk@ozlabs.org>.
>
> Signed-off-by: Edward A. James <eajames@us.ibm.com>
> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
> Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
> drivers/fsi/Kconfig | 11 +
> drivers/fsi/Makefile | 1 +
> drivers/fsi/fsi-master-gpio.c | 610 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 622 insertions(+)
> create mode 100644 drivers/fsi/fsi-master-gpio.c
>
> diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
> index 04c1a0e..9cf8345 100644
> --- a/drivers/fsi/Kconfig
> +++ b/drivers/fsi/Kconfig
> @@ -9,4 +9,15 @@ config FSI
> ---help---
> FSI - the FRU Support Interface - is a simple bus for low-level
> access to POWER-based hardware.
> +
> +if FSI
> +
> +config FSI_MASTER_GPIO
> + tristate "GPIO-based FSI master"
> + depends on FSI && GPIOLIB
depends on FSI is redundant since "if FSI" does the same thing.
> + ---help---
> + This option enables a FSI master driver using GPIO lines.
> +
> +endif
> +
--
~Randy
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v5 19/23] drivers/fsi: Add GPIO based FSI master
2017-04-05 16:35 ` Randy Dunlap
@ 2017-04-09 21:04 ` Christopher Bostic
0 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-09 21:04 UTC (permalink / raw)
To: linux-arm-kernel
On 4/5/17 11:35 AM, Randy Dunlap wrote:
> On 04/04/17 19:06, Christopher Bostic wrote:
>> From: Chris Bostic <cbostic@linux.vnet.ibm.com>
>>
>> Implement a FSI master using GPIO. Will generate FSI protocol for
>> read and write commands to particular addresses. Sends master command
>> and waits for and decodes a slave response.
>>
>> Includes changes from Edward A. James <eajames@us.ibm.com> and Jeremy
>> Kerr <jk@ozlabs.org>.
>>
>> Signed-off-by: Edward A. James <eajames@us.ibm.com>
>> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
>> Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
>> Signed-off-by: Joel Stanley <joel@jms.id.au>
>> ---
>> drivers/fsi/Kconfig | 11 +
>> drivers/fsi/Makefile | 1 +
>> drivers/fsi/fsi-master-gpio.c | 610 ++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 622 insertions(+)
>> create mode 100644 drivers/fsi/fsi-master-gpio.c
>>
>> diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
>> index 04c1a0e..9cf8345 100644
>> --- a/drivers/fsi/Kconfig
>> +++ b/drivers/fsi/Kconfig
>> @@ -9,4 +9,15 @@ config FSI
>> ---help---
>> FSI - the FRU Support Interface - is a simple bus for low-level
>> access to POWER-based hardware.
>> +
>> +if FSI
>> +
>> +config FSI_MASTER_GPIO
>> + tristate "GPIO-based FSI master"
>> + depends on FSI && GPIOLIB
> depends on FSI is redundant since "if FSI" does the same thing.
Hi Randy,
Thanks for the feedback, will correct.
-Chris
>> + ---help---
>> + This option enables a FSI master driver using GPIO lines.
>> +
>> +endif
>> +
>
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v5 20/23] drivers/fsi/gpio: Add tracepoints for GPIO master
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (18 preceding siblings ...)
2017-04-05 2:06 ` [PATCH v5 19/23] drivers/fsi: Add GPIO based FSI master Christopher Bostic
@ 2017-04-05 2:06 ` Christopher Bostic
2017-04-05 2:06 ` [PATCH v5 21/23] drivers/fsi: Add SCOM FSI client device driver Christopher Bostic
` (2 subsequent siblings)
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:06 UTC (permalink / raw)
To: linux-arm-kernel
From: Jeremy Kerr <jk@ozlabs.org>
Add trace points for key GPIO operations of the GPIO based FSI
master.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
---
drivers/fsi/fsi-master-gpio.c | 9 +++++
include/trace/events/fsi_master_gpio.h | 68 ++++++++++++++++++++++++++++++++++
2 files changed, 77 insertions(+)
create mode 100644 include/trace/events/fsi_master_gpio.h
diff --git a/drivers/fsi/fsi-master-gpio.c b/drivers/fsi/fsi-master-gpio.c
index 9fedfaf..5d9e0b0 100644
--- a/drivers/fsi/fsi-master-gpio.c
+++ b/drivers/fsi/fsi-master-gpio.c
@@ -61,6 +61,9 @@ struct fsi_master_gpio {
struct gpio_desc *gpio_mux; /* Mux control */
};
+#define CREATE_TRACE_POINTS
+#include <trace/events/fsi_master_gpio.h>
+
#define to_fsi_master_gpio(m) container_of(m, struct fsi_master_gpio, master)
struct fsi_gpio_msg {
@@ -128,6 +131,8 @@ static void serial_in(struct fsi_master_gpio *master, struct fsi_gpio_msg *msg,
msg->msg |= ~in_bit & 0x1; /* Data is negative active */
}
msg->bits += num_bits;
+
+ trace_fsi_master_gpio_in(master, num_bits, msg->msg);
}
static void serial_out(struct fsi_master_gpio *master,
@@ -139,6 +144,8 @@ static void serial_out(struct fsi_master_gpio *master,
uint64_t last_bit = ~0;
int next_bit;
+ trace_fsi_master_gpio_out(master, cmd->bits, cmd->msg);
+
if (!cmd->bits) {
dev_warn(master->dev, "trying to output 0 bits\n");
return;
@@ -464,6 +471,8 @@ static int fsi_master_gpio_break(struct fsi_master *_master, int link)
if (link != 0)
return -ENODEV;
+ trace_fsi_master_gpio_break(master);
+
set_sda_output(master, 1);
sda_out(master, 1);
clock_toggle(master, FSI_PRE_BREAK_CLOCKS);
diff --git a/include/trace/events/fsi_master_gpio.h b/include/trace/events/fsi_master_gpio.h
new file mode 100644
index 0000000..11b36c1
--- /dev/null
+++ b/include/trace/events/fsi_master_gpio.h
@@ -0,0 +1,68 @@
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM fsi_master_gpio
+
+#if !defined(_TRACE_FSI_MASTER_GPIO_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_FSI_MASTER_GPIO_H
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(fsi_master_gpio_in,
+ TP_PROTO(const struct fsi_master_gpio *master, int bits, uint64_t msg),
+ TP_ARGS(master, bits, msg),
+ TP_STRUCT__entry(
+ __field(int, master_idx)
+ __field(int, bits)
+ __field(uint64_t, msg)
+ ),
+ TP_fast_assign(
+ __entry->master_idx = master->master.idx;
+ __entry->bits = bits;
+ __entry->msg = msg & ((1ull<<bits) - 1);
+ ),
+ TP_printk("fsi-gpio%d => %0*llx[%d]",
+ __entry->master_idx,
+ (__entry->bits + 3) / 4,
+ __entry->msg,
+ __entry->bits
+ )
+);
+
+TRACE_EVENT(fsi_master_gpio_out,
+ TP_PROTO(const struct fsi_master_gpio *master, int bits, uint64_t msg),
+ TP_ARGS(master, bits, msg),
+ TP_STRUCT__entry(
+ __field(int, master_idx)
+ __field(int, bits)
+ __field(uint64_t, msg)
+ ),
+ TP_fast_assign(
+ __entry->master_idx = master->master.idx;
+ __entry->bits = bits;
+ __entry->msg = msg & ((1ull<<bits) - 1);
+ ),
+ TP_printk("fsi-gpio%d <= %0*llx[%d]",
+ __entry->master_idx,
+ (__entry->bits + 3) / 4,
+ __entry->msg,
+ __entry->bits
+ )
+);
+
+TRACE_EVENT(fsi_master_gpio_break,
+ TP_PROTO(const struct fsi_master_gpio *master),
+ TP_ARGS(master),
+ TP_STRUCT__entry(
+ __field(int, master_idx)
+ ),
+ TP_fast_assign(
+ __entry->master_idx = master->master.idx;
+ ),
+ TP_printk("fsi-gpio%d ----break---",
+ __entry->master_idx
+ )
+);
+
+#endif /* _TRACE_FSI_MASTER_GPIO_H */
+
+#include <trace/define_trace.h>
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 21/23] drivers/fsi: Add SCOM FSI client device driver
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (19 preceding siblings ...)
2017-04-05 2:06 ` [PATCH v5 20/23] drivers/fsi/gpio: Add tracepoints for GPIO master Christopher Bostic
@ 2017-04-05 2:06 ` Christopher Bostic
2017-04-05 16:35 ` Randy Dunlap
2017-04-05 2:06 ` [PATCH v5 22/23] drivers/fsi: Add hub master support Christopher Bostic
2017-04-05 2:06 ` [PATCH v5 23/23] drivers/fsi: Use asynchronous slave mode Christopher Bostic
22 siblings, 1 reply; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:06 UTC (permalink / raw)
To: linux-arm-kernel
From: Chris Bostic <cbostic@linux.vnet.ibm.com>
Create a simple SCOM engine device driver that reads and writes
its control registers via an FSI bus.
Includes changes from Edward A. James <eajames@us.ibm.com>.
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Edward A. James <eajames@us.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
drivers/fsi/Kconfig | 6 ++
drivers/fsi/Makefile | 1 +
drivers/fsi/fsi-scom.c | 263 +++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 270 insertions(+)
create mode 100644 drivers/fsi/fsi-scom.c
diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
index 9cf8345..0fa265c 100644
--- a/drivers/fsi/Kconfig
+++ b/drivers/fsi/Kconfig
@@ -18,6 +18,12 @@ config FSI_MASTER_GPIO
---help---
This option enables a FSI master driver using GPIO lines.
+config FSI_SCOM
+ tristate "SCOM FSI client device driver"
+ depends on FSI
+ ---help---
+ This option enables an FSI based SCOM device driver.
+
endif
endmenu
diff --git a/drivers/fsi/Makefile b/drivers/fsi/Makefile
index ed28ac0..3466f08 100644
--- a/drivers/fsi/Makefile
+++ b/drivers/fsi/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_FSI) += fsi-core.o
obj-$(CONFIG_FSI_MASTER_GPIO) += fsi-master-gpio.o
+obj-$(CONFIG_FSI_SCOM) += fsi-scom.o
diff --git a/drivers/fsi/fsi-scom.c b/drivers/fsi/fsi-scom.c
new file mode 100644
index 0000000..98d062f
--- /dev/null
+++ b/drivers/fsi/fsi-scom.c
@@ -0,0 +1,263 @@
+/*
+ * SCOM FSI Client device driver
+ *
+ * Copyright (C) IBM Corporation 2016
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERGCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/fsi.h>
+#include <linux/module.h>
+#include <linux/cdev.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/miscdevice.h>
+#include <linux/list.h>
+#include <linux/idr.h>
+
+#define FSI_ENGID_SCOM 0x5
+
+#define SCOM_FSI2PIB_DELAY 50
+
+/* SCOM engine register set */
+#define SCOM_DATA0_REG 0x00
+#define SCOM_DATA1_REG 0x04
+#define SCOM_CMD_REG 0x08
+#define SCOM_RESET_REG 0x1C
+
+#define SCOM_RESET_CMD 0x80000000
+#define SCOM_WRITE_CMD 0x80000000
+
+struct scom_device {
+ struct list_head link;
+ struct fsi_device *fsi_dev;
+ struct miscdevice mdev;
+ char name[32];
+ int idx;
+};
+
+#define to_scom_dev(x) container_of((x), struct scom_device, mdev)
+
+static struct list_head scom_devices;
+
+static DEFINE_IDA(scom_ida);
+
+static int put_scom(struct scom_device *scom_dev, uint64_t value,
+ uint32_t addr)
+{
+ int rc;
+ uint32_t data;
+
+ data = cpu_to_be32(SCOM_RESET_CMD);
+ rc = fsi_device_write(scom_dev->fsi_dev, SCOM_RESET_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ data = cpu_to_be32((value >> 32) & 0xffffffff);
+ rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA0_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ data = cpu_to_be32(value & 0xffffffff);
+ rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA1_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ data = cpu_to_be32(SCOM_WRITE_CMD | addr);
+ return fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data,
+ sizeof(uint32_t));
+}
+
+static int get_scom(struct scom_device *scom_dev, uint64_t *value,
+ uint32_t addr)
+{
+ uint32_t result, data;
+ int rc;
+
+ *value = 0ULL;
+ data = cpu_to_be32(addr);
+ rc = fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA0_REG, &result,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ *value |= (uint64_t)cpu_to_be32(result) << 32;
+ rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA1_REG, &result,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ *value |= cpu_to_be32(result);
+
+ return 0;
+}
+
+static ssize_t scom_read(struct file *filep, char __user *buf, size_t len,
+ loff_t *offset)
+{
+ int rc;
+ struct miscdevice *mdev =
+ (struct miscdevice *)filep->private_data;
+ struct scom_device *scom = to_scom_dev(mdev);
+ struct device *dev = &scom->fsi_dev->dev;
+ uint64_t val;
+
+ if (len != sizeof(uint64_t))
+ return -EINVAL;
+
+ rc = get_scom(scom, &val, *offset);
+ if (rc) {
+ dev_dbg(dev, "get_scom fail:%d\n", rc);
+ return rc;
+ }
+
+ rc = copy_to_user(buf, &val, len);
+ if (rc)
+ dev_dbg(dev, "copy to user failed:%d\n", rc);
+
+ return rc ? rc : len;
+}
+
+static ssize_t scom_write(struct file *filep, const char __user *buf,
+ size_t len, loff_t *offset)
+{
+ int rc;
+ struct miscdevice *mdev = filep->private_data;
+ struct scom_device *scom = to_scom_dev(mdev);
+ struct device *dev = &scom->fsi_dev->dev;
+ uint64_t val;
+
+ if (len != sizeof(uint64_t))
+ return -EINVAL;
+
+ rc = copy_from_user(&val, buf, len);
+ if (rc) {
+ dev_dbg(dev, "copy from user failed:%d\n", rc);
+ return -EINVAL;
+ }
+
+ rc = put_scom(scom, val, *offset);
+ if (rc) {
+ dev_dbg(dev, "put_scom failed with:%d\n", rc);
+ return rc;
+ }
+
+ return len;
+}
+
+static loff_t scom_llseek(struct file *file, loff_t offset, int whence)
+{
+ switch (whence) {
+ case SEEK_CUR:
+ break;
+ case SEEK_SET:
+ file->f_pos = offset;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return offset;
+}
+
+static const struct file_operations scom_fops = {
+ .owner = THIS_MODULE,
+ .llseek = scom_llseek,
+ .read = scom_read,
+ .write = scom_write,
+};
+
+static int scom_probe(struct device *dev)
+{
+ struct fsi_device *fsi_dev = to_fsi_dev(dev);
+ struct scom_device *scom;
+
+ scom = devm_kzalloc(dev, sizeof(*scom), GFP_KERNEL);
+ if (!scom)
+ return -ENOMEM;
+
+ scom->idx = ida_simple_get(&scom_ida, 1, INT_MAX, GFP_KERNEL);
+ snprintf(scom->name, sizeof(scom->name), "scom%d", scom->idx);
+ scom->fsi_dev = fsi_dev;
+ scom->mdev.minor = MISC_DYNAMIC_MINOR;
+ scom->mdev.fops = &scom_fops;
+ scom->mdev.name = scom->name;
+ scom->mdev.parent = dev;
+ list_add(&scom->link, &scom_devices);
+
+ return misc_register(&scom->mdev);
+}
+
+static int scom_remove(struct device *dev)
+{
+ struct scom_device *scom, *scom_tmp;
+ struct fsi_device *fsi_dev = to_fsi_dev(dev);
+
+ list_for_each_entry_safe(scom, scom_tmp, &scom_devices, link) {
+ if (scom->fsi_dev == fsi_dev) {
+ list_del(&scom->link);
+ ida_simple_remove(&scom_ida, scom->idx);
+ misc_deregister(&scom->mdev);
+ }
+ }
+
+ return 0;
+}
+
+static struct fsi_device_id scom_ids[] = {
+ {
+ .engine_type = FSI_ENGID_SCOM,
+ .version = FSI_VERSION_ANY,
+ },
+ { 0 }
+};
+
+static struct fsi_driver scom_drv = {
+ .id_table = scom_ids,
+ .drv = {
+ .name = "scom",
+ .bus = &fsi_bus_type,
+ .probe = scom_probe,
+ .remove = scom_remove,
+ }
+};
+
+static int scom_init(void)
+{
+ INIT_LIST_HEAD(&scom_devices);
+ return fsi_driver_register(&scom_drv);
+}
+
+static void scom_exit(void)
+{
+ struct list_head *pos;
+ struct scom_device *scom;
+
+ list_for_each(pos, &scom_devices) {
+ scom = list_entry(pos, struct scom_device, link);
+ misc_deregister(&scom->mdev);
+ devm_kfree(&scom->fsi_dev->dev, scom);
+ }
+ fsi_driver_unregister(&scom_drv);
+}
+
+module_init(scom_init);
+module_exit(scom_exit);
+MODULE_LICENSE("GPL");
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 21/23] drivers/fsi: Add SCOM FSI client device driver
2017-04-05 2:06 ` [PATCH v5 21/23] drivers/fsi: Add SCOM FSI client device driver Christopher Bostic
@ 2017-04-05 16:35 ` Randy Dunlap
2017-04-09 21:06 ` Christopher Bostic
0 siblings, 1 reply; 30+ messages in thread
From: Randy Dunlap @ 2017-04-05 16:35 UTC (permalink / raw)
To: linux-arm-kernel
On 04/04/17 19:06, Christopher Bostic wrote:
> From: Chris Bostic <cbostic@linux.vnet.ibm.com>
>
> Create a simple SCOM engine device driver that reads and writes
> its control registers via an FSI bus.
>
> Includes changes from Edward A. James <eajames@us.ibm.com>.
>
> Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> Signed-off-by: Edward A. James <eajames@us.ibm.com>
> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
> ---
> drivers/fsi/Kconfig | 6 ++
> drivers/fsi/Makefile | 1 +
> drivers/fsi/fsi-scom.c | 263 +++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 270 insertions(+)
> create mode 100644 drivers/fsi/fsi-scom.c
>
> diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
> index 9cf8345..0fa265c 100644
> --- a/drivers/fsi/Kconfig
> +++ b/drivers/fsi/Kconfig
> @@ -18,6 +18,12 @@ config FSI_MASTER_GPIO
> ---help---
> This option enables a FSI master driver using GPIO lines.
>
> +config FSI_SCOM
> + tristate "SCOM FSI client device driver"
> + depends on FSI
depends on FSI is redundant.
> + ---help---
> + This option enables an FSI based SCOM device driver.
> +
> endif
>
--
~Randy
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v5 21/23] drivers/fsi: Add SCOM FSI client device driver
2017-04-05 16:35 ` Randy Dunlap
@ 2017-04-09 21:06 ` Christopher Bostic
0 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-09 21:06 UTC (permalink / raw)
To: linux-arm-kernel
On 4/5/17 11:35 AM, Randy Dunlap wrote:
> On 04/04/17 19:06, Christopher Bostic wrote:
>> From: Chris Bostic <cbostic@linux.vnet.ibm.com>
>>
>> Create a simple SCOM engine device driver that reads and writes
>> its control registers via an FSI bus.
>>
>> Includes changes from Edward A. James <eajames@us.ibm.com>.
>>
>> Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
>> Signed-off-by: Joel Stanley <joel@jms.id.au>
>> Signed-off-by: Edward A. James <eajames@us.ibm.com>
>> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
>> ---
>> drivers/fsi/Kconfig | 6 ++
>> drivers/fsi/Makefile | 1 +
>> drivers/fsi/fsi-scom.c | 263 +++++++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 270 insertions(+)
>> create mode 100644 drivers/fsi/fsi-scom.c
>>
>> diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
>> index 9cf8345..0fa265c 100644
>> --- a/drivers/fsi/Kconfig
>> +++ b/drivers/fsi/Kconfig
>> @@ -18,6 +18,12 @@ config FSI_MASTER_GPIO
>> ---help---
>> This option enables a FSI master driver using GPIO lines.
>>
>> +config FSI_SCOM
>> + tristate "SCOM FSI client device driver"
>> + depends on FSI
> depends on FSI is redundant.
Will correct.
Thanks,
Chris
>
>> + ---help---
>> + This option enables an FSI based SCOM device driver.
>> +
>> endif
>>
>
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v5 22/23] drivers/fsi: Add hub master support
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (20 preceding siblings ...)
2017-04-05 2:06 ` [PATCH v5 21/23] drivers/fsi: Add SCOM FSI client device driver Christopher Bostic
@ 2017-04-05 2:06 ` Christopher Bostic
2017-04-05 16:36 ` Randy Dunlap
2017-04-05 2:06 ` [PATCH v5 23/23] drivers/fsi: Use asynchronous slave mode Christopher Bostic
22 siblings, 1 reply; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:06 UTC (permalink / raw)
To: linux-arm-kernel
From: Chris Bostic <cbostic@linux.vnet.ibm.com>
Add an engine driver to expose a "hub" FSI master - which has a set of
control registers in the engine address space, and uses a chunk of the
slave address space for actual FSI communication.
Additional changes from Jeremy Kerr <jk@ozlabs.org>.
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/fsi/Kconfig | 9 ++
drivers/fsi/Makefile | 1 +
drivers/fsi/fsi-master-hub.c | 327 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 337 insertions(+)
create mode 100644 drivers/fsi/fsi-master-hub.c
diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
index 0fa265c..e1156b4 100644
--- a/drivers/fsi/Kconfig
+++ b/drivers/fsi/Kconfig
@@ -18,6 +18,15 @@ config FSI_MASTER_GPIO
---help---
This option enables a FSI master driver using GPIO lines.
+config FSI_MASTER_HUB
+ tristate "FSI hub master"
+ depends on FSI
+ ---help---
+ This option enables a FSI hub master driver. Hub is a type of FSI
+ master that is connected to the upstream master via a slave. Hubs
+ allow chaining of FSI links to an arbitrary depth. This allows for
+ a high target device fanout.
+
config FSI_SCOM
tristate "SCOM FSI client device driver"
depends on FSI
diff --git a/drivers/fsi/Makefile b/drivers/fsi/Makefile
index 3466f08..65eb99d 100644
--- a/drivers/fsi/Makefile
+++ b/drivers/fsi/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_FSI) += fsi-core.o
+obj-$(CONFIG_FSI_MASTER_HUB) += fsi-master-hub.o
obj-$(CONFIG_FSI_MASTER_GPIO) += fsi-master-gpio.o
obj-$(CONFIG_FSI_SCOM) += fsi-scom.o
diff --git a/drivers/fsi/fsi-master-hub.c b/drivers/fsi/fsi-master-hub.c
new file mode 100644
index 0000000..133b9bf
--- /dev/null
+++ b/drivers/fsi/fsi-master-hub.c
@@ -0,0 +1,327 @@
+/*
+ * FSI hub master driver
+ *
+ * Copyright (C) IBM Corporation 2016
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/fsi.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "fsi-master.h"
+
+/* Control Registers */
+#define FSI_MMODE 0x0 /* R/W: mode */
+#define FSI_MDLYR 0x4 /* R/W: delay */
+#define FSI_MCRSP 0x8 /* R/W: clock rate */
+#define FSI_MENP0 0x10 /* R/W: enable */
+#define FSI_MLEVP0 0x18 /* R: plug detect */
+#define FSI_MSENP0 0x18 /* S: Set enable */
+#define FSI_MCENP0 0x20 /* C: Clear enable */
+#define FSI_MAEB 0x70 /* R: Error address */
+#define FSI_MVER 0x74 /* R: master version/type */
+#define FSI_MRESP0 0xd0 /* W: Port reset */
+#define FSI_MESRB0 0x1d0 /* R: Master error status */
+#define FSI_MRESB0 0x1d0 /* W: Reset bridge */
+#define FSI_MECTRL 0x2e0 /* W: Error control */
+
+/* MMODE: Mode control */
+#define FSI_MMODE_EIP 0x80000000 /* Enable interrupt polling */
+#define FSI_MMODE_ECRC 0x40000000 /* Enable error recovery */
+#define FSI_MMODE_EPC 0x10000000 /* Enable parity checking */
+#define FSI_MMODE_P8_TO_LSB 0x00000010 /* Timeout value LSB */
+ /* MSB=1, LSB=0 is 0.8 ms */
+ /* MSB=0, LSB=1 is 0.9 ms */
+#define FSI_MMODE_CRS0SHFT 18 /* Clk rate selection 0 shift */
+#define FSI_MMODE_CRS0MASK 0x3ff /* Clk rate selection 0 mask */
+#define FSI_MMODE_CRS1SHFT 8 /* Clk rate selection 1 shift */
+#define FSI_MMODE_CRS1MASK 0x3ff /* Clk rate selection 1 mask */
+
+/* MRESB: Reset brindge */
+#define FSI_MRESB_RST_GEN 0x80000000 /* General reset */
+#define FSI_MRESB_RST_ERR 0x40000000 /* Error Reset */
+
+/* MRESB: Reset port */
+#define FSI_MRESP_RST_ALL_MASTER 0x20000000 /* Reset all FSI masters */
+#define FSI_MRESP_RST_ALL_LINK 0x10000000 /* Reset all FSI port contr. */
+#define FSI_MRESP_RST_MCR 0x08000000 /* Reset FSI master reg. */
+#define FSI_MRESP_RST_PYE 0x04000000 /* Reset FSI parity error */
+#define FSI_MRESP_RST_ALL 0xfc000000 /* Reset any error */
+
+/* MECTRL: Error control */
+#define FSI_MECTRL_EOAE 0x8000 /* Enable machine check when */
+ /* master 0 in error */
+#define FSI_MECTRL_P8_AUTO_TERM 0x4000 /* Auto terminate */
+
+#define FSI_ENGID_HUB_MASTER 0x1c
+#define FSI_HUB_LINK_OFFSET 0x80000
+#define FSI_HUB_LINK_SIZE 0x80000
+#define FSI_HUB_MASTER_MAX_LINKS 8
+
+#define FSI_LINK_ENABLE_SETUP_TIME 10 /* in mS */
+
+/*
+ * FSI hub master support
+ *
+ * A hub master increases the number of potential target devices that the
+ * primary FSI master can access. For each link a primary master supports,
+ * each of those links can in turn be chained to a hub master with multiple
+ * links of its own.
+ *
+ * The hub is controlled by a set of control registers exposed as a regular fsi
+ * device (the hub->upstream device), and provides access to the downstream FSI
+ * bus as through an address range on the slave itself (->addr and ->size).
+ *
+ * [This differs from "cascaded" masters, which expose the entire downstream
+ * bus entirely through the fsi device address range, and so have a smaller
+ * accessible address space.]
+ */
+struct fsi_master_hub {
+ struct fsi_master master;
+ struct fsi_device *upstream;
+ uint32_t addr, size; /* slave-relative addr of */
+ /* master address space */
+};
+
+#define to_fsi_master_hub(m) container_of(m, struct fsi_master_hub, master)
+
+static int hub_master_read(struct fsi_master *master, int link,
+ uint8_t id, uint32_t addr, void *val, size_t size)
+{
+ struct fsi_master_hub *hub = to_fsi_master_hub(master);
+
+ if (id != 0)
+ return -EINVAL;
+
+ addr += hub->addr + (link * FSI_HUB_LINK_SIZE);
+ return fsi_slave_read(hub->upstream->slave, addr, val, size);
+}
+
+static int hub_master_write(struct fsi_master *master, int link,
+ uint8_t id, uint32_t addr, const void *val, size_t size)
+{
+ struct fsi_master_hub *hub = to_fsi_master_hub(master);
+
+ if (id != 0)
+ return -EINVAL;
+
+ addr += hub->addr + (link * FSI_HUB_LINK_SIZE);
+ return fsi_slave_write(hub->upstream->slave, addr, val, size);
+}
+
+static int hub_master_break(struct fsi_master *master, int link)
+{
+ uint32_t addr, cmd;
+
+ addr = 0x4;
+ cmd = cpu_to_be32(0xc0de0000);
+
+ return hub_master_write(master, link, 0, addr, &cmd, sizeof(cmd));
+}
+
+static int hub_master_link_enable(struct fsi_master *master, int link)
+{
+ struct fsi_master_hub *hub = to_fsi_master_hub(master);
+ int idx, bit;
+ __be32 reg;
+ int rc;
+
+ idx = link / 32;
+ bit = link % 32;
+
+ reg = cpu_to_be32(0x80000000 >> bit);
+
+ rc = fsi_device_write(hub->upstream, FSI_MSENP0 + (4 * idx), ®, 4);
+
+ mdelay(FSI_LINK_ENABLE_SETUP_TIME);
+
+ fsi_device_read(hub->upstream, FSI_MENP0 + (4 * idx), ®, 4);
+
+ return rc;
+}
+
+static void hub_master_release(struct device *dev)
+{
+ struct fsi_master_hub *hub = to_fsi_master_hub(dev_to_fsi_master(dev));
+
+ kfree(hub);
+}
+
+/* mmode encoders */
+static inline u32 fsi_mmode_crs0(u32 x)
+{
+ return (x & FSI_MMODE_CRS0MASK) << FSI_MMODE_CRS0SHFT;
+}
+
+static inline u32 fsi_mmode_crs1(u32 x)
+{
+ return (x & FSI_MMODE_CRS1MASK) << FSI_MMODE_CRS1SHFT;
+}
+
+static int hub_master_init(struct fsi_master_hub *hub)
+{
+ struct fsi_device *dev = hub->upstream;
+ __be32 reg;
+ int rc;
+
+ reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
+ | FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
+ rc = fsi_device_write(dev, FSI_MRESP0, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ /* Initialize the MFSI (hub master) engine */
+ reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
+ | FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
+ rc = fsi_device_write(dev, FSI_MRESP0, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ reg = cpu_to_be32(FSI_MECTRL_EOAE | FSI_MECTRL_P8_AUTO_TERM);
+ rc = fsi_device_write(dev, FSI_MECTRL, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ reg = cpu_to_be32(FSI_MMODE_EIP | FSI_MMODE_ECRC | FSI_MMODE_EPC
+ | fsi_mmode_crs0(1) | fsi_mmode_crs1(1)
+ | FSI_MMODE_P8_TO_LSB);
+ rc = fsi_device_write(dev, FSI_MMODE, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ reg = cpu_to_be32(0xffff0000);
+ rc = fsi_device_write(dev, FSI_MDLYR, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ reg = ~0;
+ rc = fsi_device_write(dev, FSI_MSENP0, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ /* Leave enabled long enough for master logic to set up */
+ mdelay(FSI_LINK_ENABLE_SETUP_TIME);
+
+ rc = fsi_device_write(dev, FSI_MCENP0, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ rc = fsi_device_read(dev, FSI_MAEB, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK);
+ rc = fsi_device_write(dev, FSI_MRESP0, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ rc = fsi_device_read(dev, FSI_MLEVP0, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ /* Reset the master bridge */
+ reg = cpu_to_be32(FSI_MRESB_RST_GEN);
+ rc = fsi_device_write(dev, FSI_MRESB0, ®, sizeof(reg));
+ if (rc)
+ return rc;
+
+ reg = cpu_to_be32(FSI_MRESB_RST_ERR);
+ return fsi_device_write(dev, FSI_MRESB0, ®, sizeof(reg));
+}
+
+static int hub_master_probe(struct device *dev)
+{
+ struct fsi_device *fsi_dev = to_fsi_dev(dev);
+ struct fsi_master_hub *hub;
+ uint32_t reg, links;
+ __be32 __reg;
+ int rc;
+
+ rc = fsi_device_read(fsi_dev, FSI_MVER, &__reg, sizeof(__reg));
+ if (rc)
+ return rc;
+
+ reg = be32_to_cpu(__reg);
+ links = (reg >> 8) & 0xff;
+ dev_info(dev, "hub version %08x (%d links)\n", reg, links);
+
+ rc = fsi_slave_claim_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET,
+ FSI_HUB_LINK_SIZE * links);
+ if (rc) {
+ dev_err(dev, "can't claim slave address range for links");
+ return rc;
+ }
+
+ hub = kzalloc(sizeof(*hub), GFP_KERNEL);
+ if (!hub) {
+ rc = -ENOMEM;
+ goto err_release;
+ }
+
+ hub->addr = FSI_HUB_LINK_OFFSET;
+ hub->size = FSI_HUB_LINK_SIZE * links;
+ hub->upstream = fsi_dev;
+
+ hub->master.dev.parent = dev;
+ hub->master.dev.release = hub_master_release;
+
+ hub->master.n_links = links;
+ hub->master.read = hub_master_read;
+ hub->master.write = hub_master_write;
+ hub->master.send_break = hub_master_break;
+ hub->master.link_enable = hub_master_link_enable;
+
+ dev_set_drvdata(dev, hub);
+
+ hub_master_init(hub);
+
+ rc = fsi_master_register(&hub->master);
+ if (!rc)
+ return 0;
+
+ kfree(hub);
+err_release:
+ fsi_slave_release_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET,
+ FSI_HUB_LINK_SIZE * links);
+ return rc;
+}
+
+static int hub_master_remove(struct device *dev)
+{
+ struct fsi_master_hub *hub = dev_get_drvdata(dev);
+
+ fsi_master_unregister(&hub->master);
+ fsi_slave_release_range(hub->upstream->slave, hub->addr, hub->size);
+ return 0;
+}
+
+static struct fsi_device_id hub_master_ids[] = {
+ {
+ .engine_type = FSI_ENGID_HUB_MASTER,
+ .version = FSI_VERSION_ANY,
+ },
+ { 0 }
+};
+
+static struct fsi_driver hub_master_driver = {
+ .id_table = hub_master_ids,
+ .drv = {
+ .name = "fsi-master-hub",
+ .bus = &fsi_bus_type,
+ .probe = hub_master_probe,
+ .remove = hub_master_remove,
+ }
+};
+
+module_fsi_driver(hub_master_driver);
+MODULE_LICENSE("GPL");
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v5 22/23] drivers/fsi: Add hub master support
2017-04-05 2:06 ` [PATCH v5 22/23] drivers/fsi: Add hub master support Christopher Bostic
@ 2017-04-05 16:36 ` Randy Dunlap
2017-04-09 21:07 ` Christopher Bostic
0 siblings, 1 reply; 30+ messages in thread
From: Randy Dunlap @ 2017-04-05 16:36 UTC (permalink / raw)
To: linux-arm-kernel
On 04/04/17 19:06, Christopher Bostic wrote:
> From: Chris Bostic <cbostic@linux.vnet.ibm.com>
>
> Add an engine driver to expose a "hub" FSI master - which has a set of
> control registers in the engine address space, and uses a chunk of the
> slave address space for actual FSI communication.
>
> Additional changes from Jeremy Kerr <jk@ozlabs.org>.
>
> Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
> drivers/fsi/Kconfig | 9 ++
> drivers/fsi/Makefile | 1 +
> drivers/fsi/fsi-master-hub.c | 327 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 337 insertions(+)
> create mode 100644 drivers/fsi/fsi-master-hub.c
>
> diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
> index 0fa265c..e1156b4 100644
> --- a/drivers/fsi/Kconfig
> +++ b/drivers/fsi/Kconfig
> @@ -18,6 +18,15 @@ config FSI_MASTER_GPIO
> ---help---
> This option enables a FSI master driver using GPIO lines.
>
> +config FSI_MASTER_HUB
> + tristate "FSI hub master"
> + depends on FSI
redundant again.
> + ---help---
> + This option enables a FSI hub master driver. Hub is a type of FSI
> + master that is connected to the upstream master via a slave. Hubs
> + allow chaining of FSI links to an arbitrary depth. This allows for
> + a high target device fanout.
> +
> config FSI_SCOM
> tristate "SCOM FSI client device driver"
> depends on FSI
--
~Randy
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v5 22/23] drivers/fsi: Add hub master support
2017-04-05 16:36 ` Randy Dunlap
@ 2017-04-09 21:07 ` Christopher Bostic
0 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-09 21:07 UTC (permalink / raw)
To: linux-arm-kernel
On 4/5/17 11:36 AM, Randy Dunlap wrote:
> On 04/04/17 19:06, Christopher Bostic wrote:
>> From: Chris Bostic <cbostic@linux.vnet.ibm.com>
>>
>> Add an engine driver to expose a "hub" FSI master - which has a set of
>> control registers in the engine address space, and uses a chunk of the
>> slave address space for actual FSI communication.
>>
>> Additional changes from Jeremy Kerr <jk@ozlabs.org>.
>>
>> Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
>> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
>> Signed-off-by: Joel Stanley <joel@jms.id.au>
>> ---
>> drivers/fsi/Kconfig | 9 ++
>> drivers/fsi/Makefile | 1 +
>> drivers/fsi/fsi-master-hub.c | 327 +++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 337 insertions(+)
>> create mode 100644 drivers/fsi/fsi-master-hub.c
>>
>> diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
>> index 0fa265c..e1156b4 100644
>> --- a/drivers/fsi/Kconfig
>> +++ b/drivers/fsi/Kconfig
>> @@ -18,6 +18,15 @@ config FSI_MASTER_GPIO
>> ---help---
>> This option enables a FSI master driver using GPIO lines.
>>
>> +config FSI_MASTER_HUB
>> + tristate "FSI hub master"
>> + depends on FSI
> redundant again.
Will correct.
Thanks,
Chris
>
>> + ---help---
>> + This option enables a FSI hub master driver. Hub is a type of FSI
>> + master that is connected to the upstream master via a slave. Hubs
>> + allow chaining of FSI links to an arbitrary depth. This allows for
>> + a high target device fanout.
>> +
>> config FSI_SCOM
>> tristate "SCOM FSI client device driver"
>> depends on FSI
>
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v5 23/23] drivers/fsi: Use asynchronous slave mode
2017-04-05 2:05 [PATCH v5 00/23] FSI device driver implementation Christopher Bostic
` (21 preceding siblings ...)
2017-04-05 2:06 ` [PATCH v5 22/23] drivers/fsi: Add hub master support Christopher Bostic
@ 2017-04-05 2:06 ` Christopher Bostic
22 siblings, 0 replies; 30+ messages in thread
From: Christopher Bostic @ 2017-04-05 2:06 UTC (permalink / raw)
To: linux-arm-kernel
From: Jeremy Kerr <jk@ozlabs.org>
For slaves that are behind a software-clocked master, we want FSI CFAMs
to run asynchronously to the FSI clock, so set up our slaves to be in
async mode.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
---
drivers/fsi/fsi-core.c | 22 +++++++++++++++++++++-
drivers/fsi/fsi-master-gpio.c | 1 +
drivers/fsi/fsi-master.h | 2 ++
3 files changed, 24 insertions(+), 1 deletion(-)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 747d0e3..a6ed34f 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -47,6 +47,7 @@
#define FSI_SMODE 0x0 /* R/W: Mode register */
#define FSI_SISC 0x8 /* R/W: Interrupt condition */
#define FSI_SSTAT 0x14 /* R : Slave status */
+#define FSI_LLMODE 0x100 /* R/W: Link layer mode register */
/*
* SMODE fields
@@ -62,6 +63,11 @@
#define FSI_SMODE_LBCRR_SHIFT 8 /* Clk ratio shift */
#define FSI_SMODE_LBCRR_MASK 0xf /* Clk ratio mask */
+/*
+ * LLMODE fields
+ */
+#define FSI_LLMODE_ASYNC 0x1
+
#define FSI_SLAVE_SIZE_23b 0x800000
static DEFINE_IDA(master_ida);
@@ -560,8 +566,8 @@ static void fsi_slave_release(struct device *dev)
static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
{
+ uint32_t chip_id, llmode;
struct fsi_slave *slave;
- uint32_t chip_id;
uint8_t crc;
int rc;
@@ -597,6 +603,20 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
return -ENODEV;
}
+ /* If we're behind a master that doesn't provide a self-running bus
+ * clock, put the slave into async mode
+ */
+ if (master->flags & FSI_MASTER_FLAG_SWCLOCK) {
+ llmode = cpu_to_be32(FSI_LLMODE_ASYNC);
+ rc = fsi_master_write(master, link, id,
+ FSI_SLAVE_BASE + FSI_LLMODE,
+ &llmode, sizeof(llmode));
+ if (rc)
+ dev_warn(&master->dev,
+ "can't set llmode on slave:%02x:%02x %d\n",
+ link, id, rc);
+ }
+
/* We can communicate with a slave; create the slave device and
* register.
*/
diff --git a/drivers/fsi/fsi-master-gpio.c b/drivers/fsi/fsi-master-gpio.c
index 5d9e0b0..d5cce88 100644
--- a/drivers/fsi/fsi-master-gpio.c
+++ b/drivers/fsi/fsi-master-gpio.c
@@ -569,6 +569,7 @@ static int fsi_master_gpio_probe(struct platform_device *pdev)
master->gpio_mux = gpio;
master->master.n_links = 1;
+ master->master.flags = FSI_MASTER_FLAG_SWCLOCK;
master->master.read = fsi_master_gpio_read;
master->master.write = fsi_master_gpio_write;
master->master.term = fsi_master_gpio_term;
diff --git a/drivers/fsi/fsi-master.h b/drivers/fsi/fsi-master.h
index d6a4885..fd39924 100644
--- a/drivers/fsi/fsi-master.h
+++ b/drivers/fsi/fsi-master.h
@@ -19,6 +19,8 @@
#include <linux/device.h>
+#define FSI_MASTER_FLAG_SWCLOCK 0x1
+
struct fsi_master {
struct device dev;
int idx;
--
1.8.2.2
^ permalink raw reply related [flat|nested] 30+ messages in thread