[PATCHv3 00/14] arm_pmu: ACPI support

[PATCHv3 00/14] arm_pmu: ACPI support

[Mark Rutland]

Hi,

This series implements ACPI support in the ARM PMU code. It borrows some code
from Jeremy's series [1], but takes a different approach to probing and
association, using the usual hotplug state machine, minimising external changes
required, and simplifying the relationship with the common arm_pmu code.

The first few patches are preparatory cleanup/refactoring, with the latter half
of the series being specific to ACPI support.

The series is based on Will's perf/updates branch [2]. I've pushed the whole
series out to the arm/perf/acpi branch [3] of my kernel.org repo.

Due to the innards of the hotplug callback framework, it's not entirely
safe to register a PMU in a hotplug callback. Due to this, we can only
associated hotplugged CPUs with a PMU if a matching CPU was around at
probe time. A similar restriction already applies to DT systems. We may
be able to relax this with some future work.

I've given this some testing on a Juno platform (using SPIs). To see that IRQs
are correctly associated, I've tested with the following:

  $ taskset -c ${SOME_CPU_HERE} perf record \
    -e armv8_pmuv3_0/cpu_cycles/ \
    -e armv8_pmuv3_1/cpu_cycles/ \
    cat /proc/interrupts
 
I've also booted with nr_cpus temporarily capped (passing maxcpus=) to test the
association logic. This has also been tested in a VM using PPIs; I do not have
access to a host machine which itself uses PPIs.

Since v1 [4]:
* Fix up ACPI bits per Lorenzo's request
* Accumulate tags
* Check presence of PMUv3

Since v2 [5]:
* Clean up GSIs when a request fails
* Rename parse/unparse functions
* Use cpuid_feature_extract_unsigned_field() for PMUVer
* Drop parking protocol cleanups. I'll resend these later.

Thanks,
Mark.

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-January/482397.html
[2] git://git.kernel.org/pub/scm/linux/kernel/git/will/linux.git perf/updates
[3] git://git.kernel.org/pub/scm/linux/kernel/git/mark/linux.git arm/perf/acpi
[4] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-March/492897.html
[5] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-April/499982.html

Mark Rutland (14):
  drivers/perf: arm_pmu: remove pointless PMU disabling
  drivers/perf: arm_pmu: define armpmu_init_fn
  drivers/perf: arm_pmu: fold init into alloc
  drivers/perf: arm_pmu: factor out pmu registration
  drivers/perf: arm_pmu: simplify cpu_pmu_request_irqs()
  drivers/perf: arm_pmu: handle no platform_device
  drivers/perf: arm_pmu: rename irq request/free functions
  drivers/perf: arm_pmu: split cpu-local irq request/free
  drivers/perf: arm_pmu: move irq request/free into probe
  drivers/perf: arm_pmu: split out platform device probe logic
  arm64: add function to get a cpu's MADT GICC table
  drivers/perf: arm_pmu: add ACPI framework
  arm64: pmuv3: handle !PMUv3 when probing
  arm64: pmuv3: use arm_pmu ACPI framework

 arch/arm64/include/asm/acpi.h   |   2 +
 arch/arm64/kernel/perf_event.c  | 113 ++++++++----
 arch/arm64/kernel/smp.c         |  10 ++
 drivers/perf/Kconfig            |   4 +
 drivers/perf/Makefile           |   3 +-
 drivers/perf/arm_pmu.c          | 387 ++++++++++------------------------------
 drivers/perf/arm_pmu_acpi.c     | 256 ++++++++++++++++++++++++++
 drivers/perf/arm_pmu_platform.c | 235 ++++++++++++++++++++++++
 include/linux/cpuhotplug.h      |   1 +
 include/linux/perf/arm_pmu.h    |  22 ++-
 10 files changed, 708 insertions(+), 325 deletions(-)
 create mode 100644 drivers/perf/arm_pmu_acpi.c
 create mode 100644 drivers/perf/arm_pmu_platform.c

-- 
1.9.1

[PATCHv3 01/14] drivers/perf: arm_pmu: remove pointless PMU disabling

[Mark Rutland]

We currently disable the PMU temporarily in armpmu_add(). We may have
required this historically, but the perf core always disables an event's
PMU when calling event::pmu::add(), so this is not necessary.

We don't do similarly in armpmu_del(), or elsewhere, so this is
unnecessary and inconsistent, and only serves to confuse the reader.

Remove the pointless disable, simplifying armpmu_add() in the process.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 drivers/perf/arm_pmu.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index a1dfe89..316c4dc 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -235,20 +235,15 @@ static void armpmu_start(struct perf_event *event, int flags)
 	struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
 	struct hw_perf_event *hwc = &event->hw;
 	int idx;
-	int err = 0;
 
 	/* An event following a process won't be stopped earlier */
 	if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus))
 		return -ENOENT;
 
-	perf_pmu_disable(event->pmu);
-
 	/* If we don't have a space for the counter then finish early. */
 	idx = armpmu->get_event_idx(hw_events, event);
-	if (idx < 0) {
-		err = idx;
-		goto out;
-	}
+	if (idx < 0)
+		return idx;
 
 	/*
 	 * If there is an event in the counter we are going to use then make
@@ -265,9 +260,7 @@ static void armpmu_start(struct perf_event *event, int flags)
 	/* Propagate our changes to the userspace mapping. */
 	perf_event_update_userpage(event);
 
-out:
-	perf_pmu_enable(event->pmu);
-	return err;
+	return 0;
 }
 
 static int
-- 
1.9.1

[PATCHv3 02/14] drivers/perf: arm_pmu: define armpmu_init_fn

[Mark Rutland]

We expect an ARM PMU's init function to have a particular prototype,
which we open-code in a few places. This is less than ideal, considering
that we cast a void value to this type in one location, and a mismatch
could easily be missed.

Add a typedef so that we can ensure this is consistent.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 drivers/perf/arm_pmu.c       | 2 +-
 include/linux/perf/arm_pmu.h | 4 +++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index 316c4dc..71a825d 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -989,7 +989,7 @@ int arm_pmu_device_probe(struct platform_device *pdev,
 			 const struct pmu_probe_info *probe_table)
 {
 	const struct of_device_id *of_id;
-	const int (*init_fn)(struct arm_pmu *);
+	armpmu_init_fn init_fn;
 	struct device_node *node = pdev->dev.of_node;
 	struct arm_pmu *pmu;
 	int ret = -ENODEV;
diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h
index 44f43fc..4249914 100644
--- a/include/linux/perf/arm_pmu.h
+++ b/include/linux/perf/arm_pmu.h
@@ -132,10 +132,12 @@ int armpmu_map_event(struct perf_event *event,
 						[PERF_COUNT_HW_CACHE_RESULT_MAX],
 		     u32 raw_event_mask);
 
+typedef int (*armpmu_init_fn)(struct arm_pmu *);
+
 struct pmu_probe_info {
 	unsigned int cpuid;
 	unsigned int mask;
-	int (*init)(struct arm_pmu *);
+	armpmu_init_fn init;
 };
 
 #define PMU_PROBE(_cpuid, _mask, _fn)	\
-- 
1.9.1

[PATCHv3 03/14] drivers/perf: arm_pmu: fold init into alloc

[Mark Rutland]

Given we always want to initialise common fields on an allocated PMU,
this patch folds this common initialisation into armpmu_alloc(). This
will make it simpler to reuse this code for an ACPI-specific probe path.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 drivers/perf/arm_pmu.c | 52 +++++++++++++++++++++++---------------------------
 1 file changed, 24 insertions(+), 28 deletions(-)

diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index 71a825d..1cb8b1a 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -494,24 +494,6 @@ static ssize_t armpmu_cpumask_show(struct device *dev,
 	.attrs = armpmu_common_attrs,
 };
 
-static void armpmu_init(struct arm_pmu *armpmu)
-{
-	armpmu->pmu = (struct pmu) {
-		.pmu_enable	= armpmu_enable,
-		.pmu_disable	= armpmu_disable,
-		.event_init	= armpmu_event_init,
-		.add		= armpmu_add,
-		.del		= armpmu_del,
-		.start		= armpmu_start,
-		.stop		= armpmu_stop,
-		.read		= armpmu_read,
-		.filter_match	= armpmu_filter_match,
-		.attr_groups	= armpmu->attr_groups,
-	};
-	armpmu->attr_groups[ARMPMU_ATTR_GROUP_COMMON] =
-		&armpmu_common_attr_group;
-}
-
 /* Set at runtime when we know what CPU type we are. */
 static struct arm_pmu *__oprofile_cpu_pmu;
 
@@ -766,14 +748,6 @@ static int cpu_pmu_init(struct arm_pmu *cpu_pmu)
 	if (err)
 		goto out_unregister;
 
-	/*
-	 * This is a CPU PMU potentially in a heterogeneous configuration (e.g.
-	 * big.LITTLE). This is not an uncore PMU, and we have taken ctx
-	 * sharing into account (e.g. with our pmu::filter_match callback and
-	 * pmu::event_init group validation).
-	 */
-	cpu_pmu->pmu.capabilities |= PERF_PMU_CAP_HETEROGENEOUS_CPUS;
-
 	return 0;
 
 out_unregister:
@@ -962,6 +936,30 @@ static struct arm_pmu *armpmu_alloc(void)
 		goto out_free_pmu;
 	}
 
+	pmu->pmu = (struct pmu) {
+		.pmu_enable	= armpmu_enable,
+		.pmu_disable	= armpmu_disable,
+		.event_init	= armpmu_event_init,
+		.add		= armpmu_add,
+		.del		= armpmu_del,
+		.start		= armpmu_start,
+		.stop		= armpmu_stop,
+		.read		= armpmu_read,
+		.filter_match	= armpmu_filter_match,
+		.attr_groups	= pmu->attr_groups,
+		/*
+		 * This is a CPU PMU potentially in a heterogeneous
+		 * configuration (e.g. big.LITTLE). This is not an uncore PMU,
+		 * and we have taken ctx sharing into account (e.g. with our
+		 * pmu::filter_match callback and pmu::event_init group
+		 * validation).
+		 */
+		.capabilities	= PERF_PMU_CAP_HETEROGENEOUS_CPUS,
+	};
+
+	pmu->attr_groups[ARMPMU_ATTR_GROUP_COMMON] =
+		&armpmu_common_attr_group;
+
 	for_each_possible_cpu(cpu) {
 		struct pmu_hw_events *events;
 
@@ -998,8 +996,6 @@ int arm_pmu_device_probe(struct platform_device *pdev,
 	if (!pmu)
 		return -ENOMEM;
 
-	armpmu_init(pmu);
-
 	pmu->plat_device = pdev;
 
 	ret = pmu_parse_irqs(pmu);
-- 
1.9.1

[PATCHv3 04/14] drivers/perf: arm_pmu: factor out pmu registration

[Mark Rutland]

Currently arm_pmu_device_probe contains probing logic specific to the
platform_device infrastructure, and some logic required to safely
register the PMU with various systems.

This patch factors out the logic relating to the registration of the
PMU. This makes arm_pmu_device_probe a little easier to read, and will
make it easier to reuse the logic for an ACPI-specific probing
mechanism.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 drivers/perf/arm_pmu.c | 40 ++++++++++++++++++++++++++--------------
 1 file changed, 26 insertions(+), 14 deletions(-)

diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index 1cb8b1a..985bd08 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -982,6 +982,31 @@ static void armpmu_free(struct arm_pmu *pmu)
 	kfree(pmu);
 }
 
+int armpmu_register(struct arm_pmu *pmu)
+{
+	int ret;
+
+	ret = cpu_pmu_init(pmu);
+	if (ret)
+		return ret;
+
+	ret = perf_pmu_register(&pmu->pmu, pmu->name, -1);
+	if (ret)
+		goto out_destroy;
+
+	if (!__oprofile_cpu_pmu)
+		__oprofile_cpu_pmu = pmu;
+
+	pr_info("enabled with %s PMU driver, %d counters available\n",
+		pmu->name, pmu->num_events);
+
+	return 0;
+
+out_destroy:
+	cpu_pmu_destroy(pmu);
+	return ret;
+}
+
 int arm_pmu_device_probe(struct platform_device *pdev,
 			 const struct of_device_id *of_table,
 			 const struct pmu_probe_info *probe_table)
@@ -1025,25 +1050,12 @@ int arm_pmu_device_probe(struct platform_device *pdev,
 		goto out_free;
 	}
 
-
-	ret = cpu_pmu_init(pmu);
+	ret = armpmu_register(pmu);
 	if (ret)
 		goto out_free;
 
-	ret = perf_pmu_register(&pmu->pmu, pmu->name, -1);
-	if (ret)
-		goto out_destroy;
-
-	if (!__oprofile_cpu_pmu)
-		__oprofile_cpu_pmu = pmu;
-
-	pr_info("enabled with %s PMU driver, %d counters available\n",
-			pmu->name, pmu->num_events);
-
 	return 0;
 
-out_destroy:
-	cpu_pmu_destroy(pmu);
 out_free:
 	pr_info("%s: failed to register PMU devices!\n",
 		of_node_full_name(node));
-- 
1.9.1

[PATCHv3 05/14] drivers/perf: arm_pmu: simplify cpu_pmu_request_irqs()

[Mark Rutland]

The ARM PMU framework code always uses armpmu_dispatch_irq as its common
IRQ handler. Passing this down from cpu_pmu_init() is somewhat
pointless, and gets in the way of refactoring.

This patch makes cpu_pmu_request_irqs() always use armpmu_dispatch_irq
as the handler when requesting IRQs, and removes the handler parameter
from its prototype.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 drivers/perf/arm_pmu.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index 985bd08..183c6fd 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -543,10 +543,11 @@ static void cpu_pmu_free_irqs(struct arm_pmu *cpu_pmu)
 	}
 }
 
-static int cpu_pmu_request_irqs(struct arm_pmu *cpu_pmu, irq_handler_t handler)
+static int cpu_pmu_request_irqs(struct arm_pmu *cpu_pmu)
 {
 	int cpu, err;
 	struct pmu_hw_events __percpu *hw_events = cpu_pmu->hw_events;
+	const irq_handler_t handler = armpmu_dispatch_irq;
 
 	for_each_cpu(cpu, &cpu_pmu->supported_cpus) {
 		int irq = per_cpu(hw_events->irq, cpu);
@@ -735,7 +736,7 @@ static int cpu_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	int err;
 
-	err = cpu_pmu_request_irqs(cpu_pmu, armpmu_dispatch_irq);
+	err = cpu_pmu_request_irqs(cpu_pmu);
 	if (err)
 		goto out;
 
-- 
1.9.1

[PATCHv3 06/14] drivers/perf: arm_pmu: handle no platform_device

[Mark Rutland]

In armpmu_dispatch_irq() we look at arm_pmu::plat_device to acquire
platdata, so that we can defer to platform-specific IRQ handling,
required on some 32-bit parts. With the advent of ACPI we won't always
have a platform_device, and so we must avoid trying to dereference
fields from it.

This patch fixes up armpmu_dispatch_irq() to avoid doing so, introducing
a new armpmu_get_platdata() helper.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 drivers/perf/arm_pmu.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index 183c6fd..2442038 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -316,10 +316,16 @@ static void armpmu_start(struct perf_event *event, int flags)
 	return 0;
 }
 
+static struct arm_pmu_platdata *armpmu_get_platdata(struct arm_pmu *armpmu)
+{
+	struct platform_device *pdev = armpmu->plat_device;
+
+	return pdev ? dev_get_platdata(&pdev->dev) : NULL;
+}
+
 static irqreturn_t armpmu_dispatch_irq(int irq, void *dev)
 {
 	struct arm_pmu *armpmu;
-	struct platform_device *plat_device;
 	struct arm_pmu_platdata *plat;
 	int ret;
 	u64 start_clock, finish_clock;
@@ -331,8 +337,8 @@ static irqreturn_t armpmu_dispatch_irq(int irq, void *dev)
 	 * dereference.
 	 */
 	armpmu = *(void **)dev;
-	plat_device = armpmu->plat_device;
-	plat = dev_get_platdata(&plat_device->dev);
+
+	plat = armpmu_get_platdata(armpmu);
 
 	start_clock = sched_clock();
 	if (plat && plat->handle_irq)
-- 
1.9.1

[PATCHv3 07/14] drivers/perf: arm_pmu: rename irq request/free functions

[Mark Rutland]

For historical reasons, portions of the arm_pmu code use a cpu_pmu_
prefix rather than an armpmu_ prefix. While a minor annoyance, this
hasn't been a problem thusfar.

However, to enable ACPI support, we'll need to expose a few things in
header files, and we should aim to keep those consistently namespaced.
In preparation for exporting our IRQ request/free functions, rename
these to have an armpmu_ prefix. For consistency, the 'cpu_pmu'
parameter is also renamed to 'armpmu'.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 drivers/perf/arm_pmu.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index 2442038..3c4e97d 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -527,12 +527,12 @@ int perf_num_counters(void)
 }
 EXPORT_SYMBOL_GPL(perf_num_counters);
 
-static void cpu_pmu_free_irqs(struct arm_pmu *cpu_pmu)
+static void armpmu_free_irqs(struct arm_pmu *armpmu)
 {
 	int cpu;
-	struct pmu_hw_events __percpu *hw_events = cpu_pmu->hw_events;
+	struct pmu_hw_events __percpu *hw_events = armpmu->hw_events;
 
-	for_each_cpu(cpu, &cpu_pmu->supported_cpus) {
+	for_each_cpu(cpu, &armpmu->supported_cpus) {
 		int irq = per_cpu(hw_events->irq, cpu);
 		if (!irq)
 			continue;
@@ -542,20 +542,20 @@ static void cpu_pmu_free_irqs(struct arm_pmu *cpu_pmu)
 			break;
 		}
 
-		if (!cpumask_test_and_clear_cpu(cpu, &cpu_pmu->active_irqs))
+		if (!cpumask_test_and_clear_cpu(cpu, &armpmu->active_irqs))
 			continue;
 
 		free_irq(irq, per_cpu_ptr(&hw_events->percpu_pmu, cpu));
 	}
 }
 
-static int cpu_pmu_request_irqs(struct arm_pmu *cpu_pmu)
+static int armpmu_request_irqs(struct arm_pmu *armpmu)
 {
 	int cpu, err;
-	struct pmu_hw_events __percpu *hw_events = cpu_pmu->hw_events;
+	struct pmu_hw_events __percpu *hw_events = armpmu->hw_events;
 	const irq_handler_t handler = armpmu_dispatch_irq;
 
-	for_each_cpu(cpu, &cpu_pmu->supported_cpus) {
+	for_each_cpu(cpu, &armpmu->supported_cpus) {
 		int irq = per_cpu(hw_events->irq, cpu);
 		if (!irq)
 			continue;
@@ -580,7 +580,7 @@ static int cpu_pmu_request_irqs(struct arm_pmu *cpu_pmu)
 			return err;
 		}
 
-		cpumask_set_cpu(cpu, &cpu_pmu->active_irqs);
+		cpumask_set_cpu(cpu, &armpmu->active_irqs);
 	}
 
 	return 0;
@@ -742,7 +742,7 @@ static int cpu_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	int err;
 
-	err = cpu_pmu_request_irqs(cpu_pmu);
+	err = armpmu_request_irqs(cpu_pmu);
 	if (err)
 		goto out;
 
@@ -761,7 +761,7 @@ static int cpu_pmu_init(struct arm_pmu *cpu_pmu)
 	cpuhp_state_remove_instance_nocalls(CPUHP_AP_PERF_ARM_STARTING,
 					    &cpu_pmu->node);
 out:
-	cpu_pmu_free_irqs(cpu_pmu);
+	armpmu_free_irqs(cpu_pmu);
 	return err;
 }
 
-- 
1.9.1

[PATCHv3 08/14] drivers/perf: arm_pmu: split cpu-local irq request/free

[Mark Rutland]

Currently we have functions to request/free all IRQs for a given PMU.
While this works today, this won't work for ACPI, where we don't know
the full set of IRQs up front, and need to request them separately.

To enable supporting ACPI, this patch splits out the cpu-local
request/free into new functions, allowing us to request/free individual
IRQs.

As this makes it possible/necessary to request a PPI once per cpu, an
additional check is added to detect mismatched PPIs. This shouldn't
matter for the DT / platform case, as we check this when parsing.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 drivers/perf/arm_pmu.c | 88 +++++++++++++++++++++++++++++---------------------
 1 file changed, 52 insertions(+), 36 deletions(-)

diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index 3c4e97d..c09c379 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -527,65 +527,81 @@ int perf_num_counters(void)
 }
 EXPORT_SYMBOL_GPL(perf_num_counters);
 
-static void armpmu_free_irqs(struct arm_pmu *armpmu)
+static void armpmu_free_irq(struct arm_pmu *armpmu, int cpu)
 {
-	int cpu;
 	struct pmu_hw_events __percpu *hw_events = armpmu->hw_events;
+	int irq = per_cpu(hw_events->irq, cpu);
 
-	for_each_cpu(cpu, &armpmu->supported_cpus) {
-		int irq = per_cpu(hw_events->irq, cpu);
-		if (!irq)
-			continue;
+	if (!cpumask_test_and_clear_cpu(cpu, &armpmu->active_irqs))
+		return;
 
-		if (irq_is_percpu(irq)) {
-			free_percpu_irq(irq, &hw_events->percpu_pmu);
-			break;
-		}
+	if (irq_is_percpu(irq)) {
+		free_percpu_irq(irq, &hw_events->percpu_pmu);
+		cpumask_clear(&armpmu->active_irqs);
+		return;
+	}
 
-		if (!cpumask_test_and_clear_cpu(cpu, &armpmu->active_irqs))
-			continue;
+	free_irq(irq, per_cpu_ptr(&hw_events->percpu_pmu, cpu));
+}
 
-		free_irq(irq, per_cpu_ptr(&hw_events->percpu_pmu, cpu));
-	}
+static void armpmu_free_irqs(struct arm_pmu *armpmu)
+{
+	int cpu;
+
+	for_each_cpu(cpu, &armpmu->supported_cpus)
+		armpmu_free_irq(armpmu, cpu);
 }
 
-static int armpmu_request_irqs(struct arm_pmu *armpmu)
+static int armpmu_request_irq(struct arm_pmu *armpmu, int cpu)
 {
-	int cpu, err;
+	int err = 0;
 	struct pmu_hw_events __percpu *hw_events = armpmu->hw_events;
 	const irq_handler_t handler = armpmu_dispatch_irq;
+	int irq = per_cpu(hw_events->irq, cpu);
+	if (!irq)
+		return 0;
 
-	for_each_cpu(cpu, &armpmu->supported_cpus) {
-		int irq = per_cpu(hw_events->irq, cpu);
-		if (!irq)
-			continue;
+	if (irq_is_percpu(irq) && cpumask_empty(&armpmu->active_irqs)) {
+		err = request_percpu_irq(irq, handler, "arm-pmu",
+					 &hw_events->percpu_pmu);
+	} else if (irq_is_percpu(irq)) {
+		int other_cpu = cpumask_first(&armpmu->active_irqs);
+		int other_irq = per_cpu(hw_events->irq, other_cpu);
 
-		if (irq_is_percpu(irq)) {
-			err = request_percpu_irq(irq, handler, "arm-pmu",
-						 &hw_events->percpu_pmu);
-			if (err) {
-				pr_err("unable to request IRQ%d for ARM PMU counters\n",
-					irq);
-			}
-
-			return err;
+		if (irq != other_irq) {
+			pr_warn("mismatched PPIs detected.\n");
+			err = -EINVAL;
 		}
-
+	} else {
 		err = request_irq(irq, handler,
 				  IRQF_NOBALANCING | IRQF_NO_THREAD, "arm-pmu",
 				  per_cpu_ptr(&hw_events->percpu_pmu, cpu));
-		if (err) {
-			pr_err("unable to request IRQ%d for ARM PMU counters\n",
-				irq);
-			return err;
-		}
+	}
 
-		cpumask_set_cpu(cpu, &armpmu->active_irqs);
+	if (err) {
+		pr_err("unable to request IRQ%d for ARM PMU counters\n",
+			irq);
+		return err;
 	}
 
+	cpumask_set_cpu(cpu, &armpmu->active_irqs);
+
 	return 0;
 }
 
+static int armpmu_request_irqs(struct arm_pmu *armpmu)
+{
+	int cpu, err;
+
+	for_each_cpu(cpu, &armpmu->supported_cpus) {
+		err = armpmu_request_irq(armpmu, cpu);
+		if (err)
+			break;
+	}
+
+	return err;
+}
+
 static int armpmu_get_cpu_irq(struct arm_pmu *pmu, int cpu)
 {
 	struct pmu_hw_events __percpu *hw_events = pmu->hw_events;
-- 
1.9.1

[PATCHv3 08/14] drivers/perf: arm_pmu: split cpu-local irq request/free

[Geert Uytterhoeven]

Hi Mark,

On Tue, Apr 11, 2017 at 10:39 AM, Mark Rutland <mark.rutland@arm.com> wrote:
> Currently we have functions to request/free all IRQs for a given PMU.
> While this works today, this won't work for ACPI, where we don't know
> the full set of IRQs up front, and need to request them separately.
>
> To enable supporting ACPI, this patch splits out the cpu-local
> request/free into new functions, allowing us to request/free individual
> IRQs.
>
> As this makes it possible/necessary to request a PPI once per cpu, an
> additional check is added to detect mismatched PPIs. This shouldn't
> matter for the DT / platform case, as we check this when parsing.
>
> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
> Tested-by: Jeremy Linton <jeremy.linton@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>

This patch causes warnings during PSCI system suspend on R-Car Gen3.

On R-Car M3-W (Dual CA57):

    Disabling non-boot CPUs ...
   +IRQ15 no longer affine to CPU1
    CPU1: shutdown
    psci: CPU1 killed.

On R-Car H3 (Quad CA57):

    Disabling non-boot CPUs ...
   +IRQ15 no longer affine to CPU1
    CPU1: shutdown
    psci: CPU1 killed.
   +IRQ16 no longer affine to CPU2
    CPU2: shutdown
    psci: CPU2 killed.
   +IRQ17 no longer affine to CPU3
    CPU3: shutdown
    psci: CPU3 killed.

Unfortunately it can't be reverted easily.

Do you have any clue?

Thanks!

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCHv3 08/14] drivers/perf: arm_pmu: split cpu-local irq request/free

[Geert Uytterhoeven]

On Tue, Apr 18, 2017 at 7:25 PM, Geert Uytterhoeven
<geert@linux-m68k.org> wrote:
> On Tue, Apr 11, 2017 at 10:39 AM, Mark Rutland <mark.rutland@arm.com> wrote:
>> Currently we have functions to request/free all IRQs for a given PMU.
>> While this works today, this won't work for ACPI, where we don't know
>> the full set of IRQs up front, and need to request them separately.
>>
>> To enable supporting ACPI, this patch splits out the cpu-local
>> request/free into new functions, allowing us to request/free individual
>> IRQs.
>>
>> As this makes it possible/necessary to request a PPI once per cpu, an
>> additional check is added to detect mismatched PPIs. This shouldn't
>> matter for the DT / platform case, as we check this when parsing.
>>
>> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
>> Tested-by: Jeremy Linton <jeremy.linton@arm.com>
>> Cc: Will Deacon <will.deacon@arm.com>
>
> This patch causes warnings during PSCI system suspend on R-Car Gen3.

Also on SH-Mobile AG5 (dual CA9).
It does not happen on R-Car M2-W (dual CA15).

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCHv3 08/14] drivers/perf: arm_pmu: split cpu-local irq request/free

[Mark Rutland]

On Tue, Apr 18, 2017 at 07:25:28PM +0200, Geert Uytterhoeven wrote:
> Hi Mark,

Hi Geert,

> On Tue, Apr 11, 2017 at 10:39 AM, Mark Rutland <mark.rutland@arm.com> wrote:
> > Currently we have functions to request/free all IRQs for a given PMU.
> > While this works today, this won't work for ACPI, where we don't know
> > the full set of IRQs up front, and need to request them separately.
> >
> > To enable supporting ACPI, this patch splits out the cpu-local
> > request/free into new functions, allowing us to request/free individual
> > IRQs.
> >
> > As this makes it possible/necessary to request a PPI once per cpu, an
> > additional check is added to detect mismatched PPIs. This shouldn't
> > matter for the DT / platform case, as we check this when parsing.
> >
> > Signed-off-by: Mark Rutland <mark.rutland@arm.com>
> > Tested-by: Jeremy Linton <jeremy.linton@arm.com>
> > Cc: Will Deacon <will.deacon@arm.com>
> 
> This patch causes warnings during PSCI system suspend on R-Car Gen3.
> 
> On R-Car M3-W (Dual CA57):
> 
>     Disabling non-boot CPUs ...
>    +IRQ15 no longer affine to CPU1
>     CPU1: shutdown
>     psci: CPU1 killed.
> 
> On R-Car H3 (Quad CA57):
> 
>     Disabling non-boot CPUs ...
>    +IRQ15 no longer affine to CPU1
>     CPU1: shutdown
>     psci: CPU1 killed.
>    +IRQ16 no longer affine to CPU2
>     CPU2: shutdown
>     psci: CPU2 killed.
>    +IRQ17 no longer affine to CPU3
>     CPU3: shutdown
>     psci: CPU3 killed.
> 
> Unfortunately it can't be reverted easily.
> 
> Do you have any clue?

Not presently. I'm somewhat surprised that this patch would have that
effect -- I would imagine that the rework this is based on is more
likely to. e.g. commit:

  c09adab01e4aeecf ("drivers/perf: arm_pmu: split irq request from enable")

Just to check, you definitely don't see these warnings immediately prior
to applying this patch?

My best guess otherwise is that prior to this patch, the PMU IRQ
request was failing earlier, and we bailed out.

Can you dump a dmesg before and after this patch, and see if the arm_pmu
driver dumps anything?

Thanks,
Mark.

[PATCHv3 08/14] drivers/perf: arm_pmu: split cpu-local irq request/free

[Geert Uytterhoeven]

Hi Mark,

On Tue, Apr 18, 2017 at 8:33 PM, Mark Rutland <mark.rutland@arm.com> wrote:
>> On Tue, Apr 11, 2017 at 10:39 AM, Mark Rutland <mark.rutland@arm.com> wrote:
>> > Currently we have functions to request/free all IRQs for a given PMU.
>> > While this works today, this won't work for ACPI, where we don't know
>> > the full set of IRQs up front, and need to request them separately.
>> >
>> > To enable supporting ACPI, this patch splits out the cpu-local
>> > request/free into new functions, allowing us to request/free individual
>> > IRQs.
>> >
>> > As this makes it possible/necessary to request a PPI once per cpu, an
>> > additional check is added to detect mismatched PPIs. This shouldn't
>> > matter for the DT / platform case, as we check this when parsing.
>> >
>> > Signed-off-by: Mark Rutland <mark.rutland@arm.com>
>> > Tested-by: Jeremy Linton <jeremy.linton@arm.com>
>> > Cc: Will Deacon <will.deacon@arm.com>
>>
>> This patch causes warnings during PSCI system suspend on R-Car Gen3.
>>
>> On R-Car M3-W (Dual CA57):
>>
>>     Disabling non-boot CPUs ...
>>    +IRQ15 no longer affine to CPU1
>>     CPU1: shutdown
>>     psci: CPU1 killed.
>>
>> On R-Car H3 (Quad CA57):
>>
>>     Disabling non-boot CPUs ...
>>    +IRQ15 no longer affine to CPU1
>>     CPU1: shutdown
>>     psci: CPU1 killed.
>>    +IRQ16 no longer affine to CPU2
>>     CPU2: shutdown
>>     psci: CPU2 killed.
>>    +IRQ17 no longer affine to CPU3
>>     CPU3: shutdown
>>     psci: CPU3 killed.
>>
>> Unfortunately it can't be reverted easily.
>>
>> Do you have any clue?
>
> Not presently. I'm somewhat surprised that this patch would have that
> effect -- I would imagine that the rework this is based on is more
> likely to. e.g. commit:
>
>   c09adab01e4aeecf ("drivers/perf: arm_pmu: split irq request from enable")

Bummer. You're right. It's actually due to that commit.

I searched in my gmail for a patch with the specific title, and blindly
replied to the first match, not noticing that was not the right patch.
Sorry for that.

> Just to check, you definitely don't see these warnings immediately prior
> to applying this patch?
>
> My best guess otherwise is that prior to this patch, the PMU IRQ
> request was failing earlier, and we bailed out.
>
> Can you dump a dmesg before and after this patch, and see if the arm_pmu
> driver dumps anything?

On R-Car Gen3, there's no change in PMU related messages.
Actual PMU messages are:

    hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7
counters available
    hw perfevents: /soc/pmu_a53: failed to probe PMU!
    hw perfevents: /soc/pmu_a53: failed to register PMU devices!

The last two are due to the CA53 cores being described in DT, but not
enabled in the firmware.

On SH-Mobile AG5 (sh73a0/kzm9g), it recently (not due to the bad commit)
started printing:

   +hw perfevents: no interrupt-affinity property for /pmu, guessing.
    hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available

which looks related.

Thanks!

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCHv3 08/14] drivers/perf: arm_pmu: split cpu-local irq request/free

[Mark Rutland]

On Tue, Apr 18, 2017 at 08:57:04PM +0200, Geert Uytterhoeven wrote:
> On Tue, Apr 18, 2017 at 8:33 PM, Mark Rutland <mark.rutland@arm.com> wrote:

> > I'm somewhat surprised that this patch would have that
> > effect -- I would imagine that the rework this is based on is more
> > likely to. e.g. commit:
> >
> >   c09adab01e4aeecf ("drivers/perf: arm_pmu: split irq request from enable")
> 
> Bummer. You're right. It's actually due to that commit.

Ok; I understand what's happening, then.

FWIW, the warnings are benign, albeit annoying.

I'll have a go at cleaning this up.

> I searched in my gmail for a patch with the specific title, and blindly
> replied to the first match, not noticing that was not the right patch.
> Sorry for that.

No worries.

> On R-Car Gen3, there's no change in PMU related messages.
> Actual PMU messages are:
> 
>     hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7
> counters available
>     hw perfevents: /soc/pmu_a53: failed to probe PMU!
>     hw perfevents: /soc/pmu_a53: failed to register PMU devices!
> 
> The last two are due to the CA53 cores being described in DT, but not
> enabled in the firmware.

Ok. 

> On SH-Mobile AG5 (sh73a0/kzm9g), it recently (not due to the bad commit)
> started printing:
> 
>    +hw perfevents: no interrupt-affinity property for /pmu, guessing.
>     hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
> 
> which looks related.

That's stating that the DTB doesn't provide a interrupt-affinity
property for the PMU nodem so the affinity is guessed based on the
logical CPU ordering, which is dodgy.

I can see that's missing in arch/arm/boot/dts/sh73a0.dtsi.

That should be easy to fix up, as per
arch/arm64/boot/dts/renesas/r8a7795.dtsi, assuming you're aware of which
IRQ corresponds to which CPU.

Thanks,
Mark.

[PATCHv3 09/14] drivers/perf: arm_pmu: move irq request/free into probe

[Mark Rutland]

Currently we request (and potentially free) all IRQs for a given PMU in
cpu_pmu_init(). This works for platform/DT probing today, but it doesn't
fit ACPI well as we don't have all our affinity data up-front.

In preparation for ACPI support, fold the IRQ request/free into
arm_pmu_device_probe(), which will remain specific to platform/DT
probing.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 drivers/perf/arm_pmu.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index c09c379..f387d61 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -758,10 +758,6 @@ static int cpu_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	int err;
 
-	err = armpmu_request_irqs(cpu_pmu);
-	if (err)
-		goto out;
-
 	err = cpuhp_state_add_instance(CPUHP_AP_PERF_ARM_STARTING,
 				       &cpu_pmu->node);
 	if (err)
@@ -777,7 +773,6 @@ static int cpu_pmu_init(struct arm_pmu *cpu_pmu)
 	cpuhp_state_remove_instance_nocalls(CPUHP_AP_PERF_ARM_STARTING,
 					    &cpu_pmu->node);
 out:
-	armpmu_free_irqs(cpu_pmu);
 	return err;
 }
 
@@ -1073,12 +1068,18 @@ int arm_pmu_device_probe(struct platform_device *pdev,
 		goto out_free;
 	}
 
+	ret = armpmu_request_irqs(pmu);
+	if (ret)
+		goto out_free_irqs;
+
 	ret = armpmu_register(pmu);
 	if (ret)
 		goto out_free;
 
 	return 0;
 
+out_free_irqs:
+	armpmu_free_irqs(pmu);
 out_free:
 	pr_info("%s: failed to register PMU devices!\n",
 		of_node_full_name(node));
-- 
1.9.1

[PATCHv3 10/14] drivers/perf: arm_pmu: split out platform device probe logic

[Mark Rutland]

Now that we've split the pdev and DT probing logic from the runtime
management, let's move the former into its own file. We gain a few lines
due to the copyright header and includes, but this should keep the logic
clearly separated, and paves the way for adding ACPI support in a
similar fashion.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 drivers/perf/Makefile           |   2 +-
 drivers/perf/arm_pmu.c          | 226 +-------------------------------------
 drivers/perf/arm_pmu_platform.c | 235 ++++++++++++++++++++++++++++++++++++++++
 include/linux/perf/arm_pmu.h    |   7 ++
 4 files changed, 247 insertions(+), 223 deletions(-)
 create mode 100644 drivers/perf/arm_pmu_platform.c

diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index ef0c6b2..925cd39 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -1,4 +1,4 @@
-obj-$(CONFIG_ARM_PMU) += arm_pmu.o
+obj-$(CONFIG_ARM_PMU) += arm_pmu.o arm_pmu_platform.o
 obj-$(CONFIG_QCOM_L2_PMU)	+= qcom_l2_pmu.o
 obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o
 obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index f387d61..b3bedfa 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -16,7 +16,6 @@
 #include <linux/cpu_pm.h>
 #include <linux/export.h>
 #include <linux/kernel.h>
-#include <linux/of_device.h>
 #include <linux/perf/arm_pmu.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
@@ -25,7 +24,6 @@
 #include <linux/irq.h>
 #include <linux/irqdesc.h>
 
-#include <asm/cputype.h>
 #include <asm/irq_regs.h>
 
 static int
@@ -544,7 +542,7 @@ static void armpmu_free_irq(struct arm_pmu *armpmu, int cpu)
 	free_irq(irq, per_cpu_ptr(&hw_events->percpu_pmu, cpu));
 }
 
-static void armpmu_free_irqs(struct arm_pmu *armpmu)
+void armpmu_free_irqs(struct arm_pmu *armpmu)
 {
 	int cpu;
 
@@ -589,7 +587,7 @@ static int armpmu_request_irq(struct arm_pmu *armpmu, int cpu)
 	return 0;
 }
 
-static int armpmu_request_irqs(struct arm_pmu *armpmu)
+int armpmu_request_irqs(struct arm_pmu *armpmu)
 {
 	int cpu, err;
 
@@ -783,161 +781,7 @@ static void cpu_pmu_destroy(struct arm_pmu *cpu_pmu)
 					    &cpu_pmu->node);
 }
 
-/*
- * CPU PMU identification and probing.
- */
-static int probe_current_pmu(struct arm_pmu *pmu,
-			     const struct pmu_probe_info *info)
-{
-	int cpu = get_cpu();
-	unsigned int cpuid = read_cpuid_id();
-	int ret = -ENODEV;
-
-	pr_info("probing PMU on CPU %d\n", cpu);
-
-	for (; info->init != NULL; info++) {
-		if ((cpuid & info->mask) != info->cpuid)
-			continue;
-		ret = info->init(pmu);
-		break;
-	}
-
-	put_cpu();
-	return ret;
-}
-
-static int pmu_parse_percpu_irq(struct arm_pmu *pmu, int irq)
-{
-	int cpu, ret;
-	struct pmu_hw_events __percpu *hw_events = pmu->hw_events;
-
-	ret = irq_get_percpu_devid_partition(irq, &pmu->supported_cpus);
-	if (ret)
-		return ret;
-
-	for_each_cpu(cpu, &pmu->supported_cpus)
-		per_cpu(hw_events->irq, cpu) = irq;
-
-	return 0;
-}
-
-static bool pmu_has_irq_affinity(struct device_node *node)
-{
-	return !!of_find_property(node, "interrupt-affinity", NULL);
-}
-
-static int pmu_parse_irq_affinity(struct device_node *node, int i)
-{
-	struct device_node *dn;
-	int cpu;
-
-	/*
-	 * If we don't have an interrupt-affinity property, we guess irq
-	 * affinity matches our logical CPU order, as we used to assume.
-	 * This is fragile, so we'll warn in pmu_parse_irqs().
-	 */
-	if (!pmu_has_irq_affinity(node))
-		return i;
-
-	dn = of_parse_phandle(node, "interrupt-affinity", i);
-	if (!dn) {
-		pr_warn("failed to parse interrupt-affinity[%d] for %s\n",
-			i, node->name);
-		return -EINVAL;
-	}
-
-	/* Now look up the logical CPU number */
-	for_each_possible_cpu(cpu) {
-		struct device_node *cpu_dn;
-
-		cpu_dn = of_cpu_device_node_get(cpu);
-		of_node_put(cpu_dn);
-
-		if (dn == cpu_dn)
-			break;
-	}
-
-	if (cpu >= nr_cpu_ids) {
-		pr_warn("failed to find logical CPU for %s\n", dn->name);
-	}
-
-	of_node_put(dn);
-
-	return cpu;
-}
-
-static int pmu_parse_irqs(struct arm_pmu *pmu)
-{
-	int i = 0, irqs;
-	struct platform_device *pdev = pmu->plat_device;
-	struct pmu_hw_events __percpu *hw_events = pmu->hw_events;
-
-	irqs = platform_irq_count(pdev);
-	if (irqs < 0) {
-		pr_err("unable to count PMU IRQs\n");
-		return irqs;
-	}
-
-	/*
-	 * In this case we have no idea which CPUs are covered by the PMU.
-	 * To match our prior behaviour, we assume all CPUs in this case.
-	 */
-	if (irqs == 0) {
-		pr_warn("no irqs for PMU, sampling events not supported\n");
-		pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
-		cpumask_setall(&pmu->supported_cpus);
-		return 0;
-	}
-
-	if (irqs == 1) {
-		int irq = platform_get_irq(pdev, 0);
-		if (irq && irq_is_percpu(irq))
-			return pmu_parse_percpu_irq(pmu, irq);
-	}
-
-	if (!pmu_has_irq_affinity(pdev->dev.of_node)) {
-		pr_warn("no interrupt-affinity property for %s, guessing.\n",
-			of_node_full_name(pdev->dev.of_node));
-	}
-
-	/*
-	 * Some platforms have all PMU IRQs OR'd into a single IRQ, with a
-	 * special platdata function that attempts to demux them.
-	 */
-	if (dev_get_platdata(&pdev->dev))
-		cpumask_setall(&pmu->supported_cpus);
-
-	for (i = 0; i < irqs; i++) {
-		int cpu, irq;
-
-		irq = platform_get_irq(pdev, i);
-		if (WARN_ON(irq <= 0))
-			continue;
-
-		if (irq_is_percpu(irq)) {
-			pr_warn("multiple PPIs or mismatched SPI/PPI detected\n");
-			return -EINVAL;
-		}
-
-		cpu = pmu_parse_irq_affinity(pdev->dev.of_node, i);
-		if (cpu < 0)
-			return cpu;
-		if (cpu >= nr_cpu_ids)
-			continue;
-
-		if (per_cpu(hw_events->irq, cpu)) {
-			pr_warn("multiple PMU IRQs for the same CPU detected\n");
-			return -EINVAL;
-		}
-
-		per_cpu(hw_events->irq, cpu) = irq;
-		cpumask_set_cpu(cpu, &pmu->supported_cpus);
-	}
-
-	return 0;
-}
-
-static struct arm_pmu *armpmu_alloc(void)
+struct arm_pmu *armpmu_alloc(void)
 {
 	struct arm_pmu *pmu;
 	int cpu;
@@ -994,7 +838,7 @@ static struct arm_pmu *armpmu_alloc(void)
 	return NULL;
 }
 
-static void armpmu_free(struct arm_pmu *pmu)
+void armpmu_free(struct arm_pmu *pmu)
 {
 	free_percpu(pmu->hw_events);
 	kfree(pmu);
@@ -1025,68 +869,6 @@ int armpmu_register(struct arm_pmu *pmu)
 	return ret;
 }
 
-int arm_pmu_device_probe(struct platform_device *pdev,
-			 const struct of_device_id *of_table,
-			 const struct pmu_probe_info *probe_table)
-{
-	const struct of_device_id *of_id;
-	armpmu_init_fn init_fn;
-	struct device_node *node = pdev->dev.of_node;
-	struct arm_pmu *pmu;
-	int ret = -ENODEV;
-
-	pmu = armpmu_alloc();
-	if (!pmu)
-		return -ENOMEM;
-
-	pmu->plat_device = pdev;
-
-	ret = pmu_parse_irqs(pmu);
-	if (ret)
-		goto out_free;
-
-	if (node && (of_id = of_match_node(of_table, pdev->dev.of_node))) {
-		init_fn = of_id->data;
-
-		pmu->secure_access = of_property_read_bool(pdev->dev.of_node,
-							   "secure-reg-access");
-
-		/* arm64 systems boot only as non-secure */
-		if (IS_ENABLED(CONFIG_ARM64) && pmu->secure_access) {
-			pr_warn("ignoring \"secure-reg-access\" property for arm64\n");
-			pmu->secure_access = false;
-		}
-
-		ret = init_fn(pmu);
-	} else if (probe_table) {
-		cpumask_setall(&pmu->supported_cpus);
-		ret = probe_current_pmu(pmu, probe_table);
-	}
-
-	if (ret) {
-		pr_info("%s: failed to probe PMU!\n", of_node_full_name(node));
-		goto out_free;
-	}
-
-	ret = armpmu_request_irqs(pmu);
-	if (ret)
-		goto out_free_irqs;
-
-	ret = armpmu_register(pmu);
-	if (ret)
-		goto out_free;
-
-	return 0;
-
-out_free_irqs:
-	armpmu_free_irqs(pmu);
-out_free:
-	pr_info("%s: failed to register PMU devices!\n",
-		of_node_full_name(node));
-	armpmu_free(pmu);
-	return ret;
-}
-
 static int arm_pmu_hp_init(void)
 {
 	int ret;
diff --git a/drivers/perf/arm_pmu_platform.c b/drivers/perf/arm_pmu_platform.c
new file mode 100644
index 0000000..d725adc
--- /dev/null
+++ b/drivers/perf/arm_pmu_platform.c
@@ -0,0 +1,235 @@
+/*
+ * platform_device probing code for ARM performance counters.
+ *
+ * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
+ * Copyright (C) 2010 ARM Ltd., Will Deacon <will.deacon@arm.com>
+ */
+#define pr_fmt(fmt) "hw perfevents: " fmt
+
+#include <linux/bug.h>
+#include <linux/cpumask.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/irq.h>
+#include <linux/irqdesc.h>
+#include <linux/kconfig.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/percpu.h>
+#include <linux/perf/arm_pmu.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/smp.h>
+
+static int probe_current_pmu(struct arm_pmu *pmu,
+			     const struct pmu_probe_info *info)
+{
+	int cpu = get_cpu();
+	unsigned int cpuid = read_cpuid_id();
+	int ret = -ENODEV;
+
+	pr_info("probing PMU on CPU %d\n", cpu);
+
+	for (; info->init != NULL; info++) {
+		if ((cpuid & info->mask) != info->cpuid)
+			continue;
+		ret = info->init(pmu);
+		break;
+	}
+
+	put_cpu();
+	return ret;
+}
+
+static int pmu_parse_percpu_irq(struct arm_pmu *pmu, int irq)
+{
+	int cpu, ret;
+	struct pmu_hw_events __percpu *hw_events = pmu->hw_events;
+
+	ret = irq_get_percpu_devid_partition(irq, &pmu->supported_cpus);
+	if (ret)
+		return ret;
+
+	for_each_cpu(cpu, &pmu->supported_cpus)
+		per_cpu(hw_events->irq, cpu) = irq;
+
+	return 0;
+}
+
+static bool pmu_has_irq_affinity(struct device_node *node)
+{
+	return !!of_find_property(node, "interrupt-affinity", NULL);
+}
+
+static int pmu_parse_irq_affinity(struct device_node *node, int i)
+{
+	struct device_node *dn;
+	int cpu;
+
+	/*
+	 * If we don't have an interrupt-affinity property, we guess irq
+	 * affinity matches our logical CPU order, as we used to assume.
+	 * This is fragile, so we'll warn in pmu_parse_irqs().
+	 */
+	if (!pmu_has_irq_affinity(node))
+		return i;
+
+	dn = of_parse_phandle(node, "interrupt-affinity", i);
+	if (!dn) {
+		pr_warn("failed to parse interrupt-affinity[%d] for %s\n",
+			i, node->name);
+		return -EINVAL;
+	}
+
+	/* Now look up the logical CPU number */
+	for_each_possible_cpu(cpu) {
+		struct device_node *cpu_dn;
+
+		cpu_dn = of_cpu_device_node_get(cpu);
+		of_node_put(cpu_dn);
+
+		if (dn == cpu_dn)
+			break;
+	}
+
+	if (cpu >= nr_cpu_ids) {
+		pr_warn("failed to find logical CPU for %s\n", dn->name);
+	}
+
+	of_node_put(dn);
+
+	return cpu;
+}
+
+static int pmu_parse_irqs(struct arm_pmu *pmu)
+{
+	int i = 0, nr_irqs;
+	struct platform_device *pdev = pmu->plat_device;
+	struct pmu_hw_events __percpu *hw_events = pmu->hw_events;
+
+	nr_irqs = platform_irq_count(pdev);
+	if (nr_irqs < 0) {
+		pr_err("unable to count PMU IRQs\n");
+		return nr_irqs;
+	}
+
+	/*
+	 * In this case we have no idea which CPUs are covered by the PMU.
+	 * To match our prior behaviour, we assume all CPUs in this case.
+	 */
+	if (nr_irqs == 0) {
+		pr_warn("no irqs for PMU, sampling events not supported\n");
+		pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
+		cpumask_setall(&pmu->supported_cpus);
+		return 0;
+	}
+
+	if (nr_irqs == 1) {
+		int irq = platform_get_irq(pdev, 0);
+		if (irq && irq_is_percpu(irq))
+			return pmu_parse_percpu_irq(pmu, irq);
+	}
+
+	if (!pmu_has_irq_affinity(pdev->dev.of_node)) {
+		pr_warn("no interrupt-affinity property for %s, guessing.\n",
+			of_node_full_name(pdev->dev.of_node));
+	}
+
+	/*
+	 * Some platforms have all PMU IRQs OR'd into a single IRQ, with a
+	 * special platdata function that attempts to demux them.
+	 */
+	if (dev_get_platdata(&pdev->dev))
+		cpumask_setall(&pmu->supported_cpus);
+
+	for (i = 0; i < nr_irqs; i++) {
+		int cpu, irq;
+
+		irq = platform_get_irq(pdev, i);
+		if (WARN_ON(irq <= 0))
+			continue;
+
+		if (irq_is_percpu(irq)) {
+			pr_warn("multiple PPIs or mismatched SPI/PPI detected\n");
+			return -EINVAL;
+		}
+
+		cpu = pmu_parse_irq_affinity(pdev->dev.of_node, i);
+		if (cpu < 0)
+			return cpu;
+		if (cpu >= nr_cpu_ids)
+			continue;
+
+		if (per_cpu(hw_events->irq, cpu)) {
+			pr_warn("multiple PMU IRQs for the same CPU detected\n");
+			return -EINVAL;
+		}
+
+		per_cpu(hw_events->irq, cpu) = irq;
+		cpumask_set_cpu(cpu, &pmu->supported_cpus);
+	}
+
+	return 0;
+}
+
+int arm_pmu_device_probe(struct platform_device *pdev,
+			 const struct of_device_id *of_table,
+			 const struct pmu_probe_info *probe_table)
+{
+	const struct of_device_id *of_id;
+	armpmu_init_fn init_fn;
+	struct device_node *node = pdev->dev.of_node;
+	struct arm_pmu *pmu;
+	int ret = -ENODEV;
+
+	pmu = armpmu_alloc();
+	if (!pmu)
+		return -ENOMEM;
+
+	pmu->plat_device = pdev;
+
+	ret = pmu_parse_irqs(pmu);
+	if (ret)
+		goto out_free;
+
+	if (node && (of_id = of_match_node(of_table, pdev->dev.of_node))) {
+		init_fn = of_id->data;
+
+		pmu->secure_access = of_property_read_bool(pdev->dev.of_node,
+							   "secure-reg-access");
+
+		/* arm64 systems boot only as non-secure */
+		if (IS_ENABLED(CONFIG_ARM64) && pmu->secure_access) {
+			pr_warn("ignoring \"secure-reg-access\" property for arm64\n");
+			pmu->secure_access = false;
+		}
+
+		ret = init_fn(pmu);
+	} else if (probe_table) {
+		cpumask_setall(&pmu->supported_cpus);
+		ret = probe_current_pmu(pmu, probe_table);
+	}
+
+	if (ret) {
+		pr_info("%s: failed to probe PMU!\n", of_node_full_name(node));
+		goto out_free;
+	}
+
+	ret = armpmu_request_irqs(pmu);
+	if (ret)
+		goto out_free_irqs;
+
+	ret = armpmu_register(pmu);
+	if (ret)
+		goto out_free;
+
+	return 0;
+
+out_free_irqs:
+	armpmu_free_irqs(pmu);
+out_free:
+	pr_info("%s: failed to register PMU devices!\n",
+		of_node_full_name(node));
+	armpmu_free(pmu);
+	return ret;
+}
diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h
index 4249914..25556eb 100644
--- a/include/linux/perf/arm_pmu.h
+++ b/include/linux/perf/arm_pmu.h
@@ -159,6 +159,13 @@ int arm_pmu_device_probe(struct platform_device *pdev,
 			 const struct of_device_id *of_table,
 			 const struct pmu_probe_info *probe_table);
 
+/* Internal functions only for core arm_pmu code */
+struct arm_pmu *armpmu_alloc(void);
+void armpmu_free(struct arm_pmu *pmu);
+int armpmu_register(struct arm_pmu *pmu);
+int armpmu_request_irqs(struct arm_pmu *armpmu);
+void armpmu_free_irqs(struct arm_pmu *armpmu);
+
 #define ARMV8_PMU_PDEV_NAME "armv8-pmu"
 
 #endif /* CONFIG_ARM_PMU */
-- 
1.9.1

[PATCHv3 11/14] arm64: add function to get a cpu's MADT GICC table

[Mark Rutland]

Currently the ACPI parking protocol code needs to parse each CPU's MADT
GICC table to extract the mailbox address and so on. Each time we parse
a GICC table, we call back to the parking protocol code to parse it.

This has been fine so far, but we're about to have more code that needs
to extract data from the GICC tables, and adding a callback for each
user is going to get unwieldy.

Instead, this patch ensures that we stash a copy of each CPU's GICC
table at boot time, such that anything needing to parse it can later
request it. This will allow for other parsers of GICC, and for
simplification to the ACPI parking protocol code. Note that we must
store a copy, rather than a pointer, since the core ACPI code
temporarily maps/unmaps tables while iterating over them.

Since we parse the MADT before we know how many CPUs we have (and hence
before we setup the percpu areas), we must use an NR_CPUS sized array.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/acpi.h |  2 ++
 arch/arm64/kernel/smp.c       | 10 ++++++++++
 2 files changed, 12 insertions(+)

diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
index c1976c0..0e99978 100644
--- a/arch/arm64/include/asm/acpi.h
+++ b/arch/arm64/include/asm/acpi.h
@@ -85,6 +85,8 @@ static inline bool acpi_has_cpu_in_madt(void)
 	return true;
 }
 
+struct acpi_madt_generic_interrupt *acpi_cpu_get_madt_gicc(int cpu);
+
 static inline void arch_fix_phys_package_id(int num, u32 slot) { }
 void __init acpi_init_cpus(void);
 
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index ef1caae..390c277 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -518,6 +518,13 @@ static int __init smp_cpu_setup(int cpu)
 static unsigned int cpu_count = 1;
 
 #ifdef CONFIG_ACPI
+static struct acpi_madt_generic_interrupt cpu_madt_gicc[NR_CPUS];
+
+struct acpi_madt_generic_interrupt *acpi_cpu_get_madt_gicc(int cpu)
+{
+	return &cpu_madt_gicc[cpu];
+}
+
 /*
  * acpi_map_gic_cpu_interface - parse processor MADT entry
  *
@@ -552,6 +559,7 @@ static int __init smp_cpu_setup(int cpu)
 			return;
 		}
 		bootcpu_valid = true;
+		cpu_madt_gicc[0] = *processor;
 		early_map_cpu_to_node(0, acpi_numa_get_nid(0, hwid));
 		return;
 	}
@@ -562,6 +570,8 @@ static int __init smp_cpu_setup(int cpu)
 	/* map the logical cpu id to cpu MPIDR */
 	cpu_logical_map(cpu_count) = hwid;
 
+	cpu_madt_gicc[cpu_count] = *processor;
+
 	/*
 	 * Set-up the ACPI parking protocol cpu entries
 	 * while initializing the cpu_logical_map to
-- 
1.9.1

[PATCHv3 12/14] drivers/perf: arm_pmu: add ACPI framework

[Mark Rutland]

This patch adds framework code to handle parsing PMU data out of the
MADT, sanity checking this, and managing the association of CPUs (and
their interrupts) with appropriate logical PMUs.

For the time being, we expect that only one PMU driver (PMUv3) will make
use of this, and we simply pass in a single probe function.

This is based on an earlier patch from Jeremy Linton.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 drivers/perf/Kconfig         |   4 +
 drivers/perf/Makefile        |   1 +
 drivers/perf/arm_pmu.c       |   4 +-
 drivers/perf/arm_pmu_acpi.c  | 256 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/cpuhotplug.h   |   1 +
 include/linux/perf/arm_pmu.h |  11 ++
 6 files changed, 275 insertions(+), 2 deletions(-)
 create mode 100644 drivers/perf/arm_pmu_acpi.c

diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index c436e0d..aa587ed 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -12,6 +12,10 @@ config ARM_PMU
 	  Say y if you want to use CPU performance monitors on ARM-based
 	  systems.
 
+config ARM_PMU_ACPI
+	depends on ARM_PMU && ACPI
+	def_bool y
+
 config QCOM_L2_PMU
 	bool "Qualcomm Technologies L2-cache PMU"
 	depends on ARCH_QCOM && ARM64 && PERF_EVENTS && ACPI
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index 925cd39..6420bd4 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_ARM_PMU) += arm_pmu.o arm_pmu_platform.o
+obj-$(CONFIG_ARM_PMU_ACPI) += arm_pmu_acpi.o
 obj-$(CONFIG_QCOM_L2_PMU)	+= qcom_l2_pmu.o
 obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o
 obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index b3bedfa..dc459eb 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -525,7 +525,7 @@ int perf_num_counters(void)
 }
 EXPORT_SYMBOL_GPL(perf_num_counters);
 
-static void armpmu_free_irq(struct arm_pmu *armpmu, int cpu)
+void armpmu_free_irq(struct arm_pmu *armpmu, int cpu)
 {
 	struct pmu_hw_events __percpu *hw_events = armpmu->hw_events;
 	int irq = per_cpu(hw_events->irq, cpu);
@@ -550,7 +550,7 @@ void armpmu_free_irqs(struct arm_pmu *armpmu)
 		armpmu_free_irq(armpmu, cpu);
 }
 
-static int armpmu_request_irq(struct arm_pmu *armpmu, int cpu)
+int armpmu_request_irq(struct arm_pmu *armpmu, int cpu)
 {
 	int err = 0;
 	struct pmu_hw_events __percpu *hw_events = armpmu->hw_events;
diff --git a/drivers/perf/arm_pmu_acpi.c b/drivers/perf/arm_pmu_acpi.c
new file mode 100644
index 0000000..34c862f
--- /dev/null
+++ b/drivers/perf/arm_pmu_acpi.c
@@ -0,0 +1,256 @@
+/*
+ * ACPI probing code for ARM performance counters.
+ *
+ * Copyright (C) 2017 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/percpu.h>
+#include <linux/perf/arm_pmu.h>
+
+#include <asm/cputype.h>
+
+static DEFINE_PER_CPU(struct arm_pmu *, probed_pmus);
+static DEFINE_PER_CPU(int, pmu_irqs);
+
+static int arm_pmu_acpi_register_irq(int cpu)
+{
+	struct acpi_madt_generic_interrupt *gicc;
+	int gsi, trigger;
+
+	gicc = acpi_cpu_get_madt_gicc(cpu);
+	if (WARN_ON(!gicc))
+		return -EINVAL;
+
+	gsi = gicc->performance_interrupt;
+	if (gicc->flags & ACPI_MADT_PERFORMANCE_IRQ_MODE)
+		trigger = ACPI_EDGE_SENSITIVE;
+	else
+		trigger = ACPI_LEVEL_SENSITIVE;
+
+	/*
+	 * Helpfully, the MADT GICC doesn't have a polarity flag for the
+	 * "performance interrupt". Luckily, on compliant GICs the polarity is
+	 * a fixed value in HW (for both SPIs and PPIs) that we cannot change
+	 * from SW.
+	 *
+	 * Here we pass in ACPI_ACTIVE_HIGH to keep the core code happy. This
+	 * may not match the real polarity, but that should not matter.
+	 *
+	 * Other interrupt controllers are not supported with ACPI.
+	 */
+	return acpi_register_gsi(NULL, gsi, trigger, ACPI_ACTIVE_HIGH);
+}
+
+static void arm_pmu_acpi_unregister_irq(int cpu)
+{
+	struct acpi_madt_generic_interrupt *gicc;
+	int gsi;
+
+	gicc = acpi_cpu_get_madt_gicc(cpu);
+	if (!gicc)
+		return;
+
+	gsi = gicc->performance_interrupt;
+	acpi_unregister_gsi(gsi);
+}
+
+static int arm_pmu_acpi_parse_irqs(void)
+{
+	int irq, cpu, irq_cpu, err;
+
+	for_each_possible_cpu(cpu) {
+		irq = arm_pmu_acpi_register_irq(cpu);
+		if (irq < 0) {
+			err = irq;
+			pr_warn("Unable to parse ACPI PMU IRQ for CPU%d: %d\n",
+				cpu, err);
+			goto out_err;
+		} else if (irq == 0) {
+			pr_warn("No ACPI PMU IRQ for CPU%d\n", cpu);
+		}
+
+		per_cpu(pmu_irqs, cpu) = irq;
+	}
+
+	return 0;
+
+out_err:
+	for_each_possible_cpu(cpu) {
+		irq = per_cpu(pmu_irqs, cpu);
+		if (!irq)
+			continue;
+
+		arm_pmu_acpi_unregister_irq(cpu);
+
+		/*
+		 * Blat all copies of the IRQ so that we only unregister the
+		 * corresponding GSI once (e.g. when we have PPIs).
+		 */
+		for_each_possible_cpu(irq_cpu) {
+			if (per_cpu(pmu_irqs, irq_cpu) == irq)
+				per_cpu(pmu_irqs, irq_cpu) = 0;
+		}
+	}
+
+	return err;
+}
+
+static struct arm_pmu *arm_pmu_acpi_find_alloc_pmu(void)
+{
+	unsigned long cpuid = read_cpuid_id();
+	struct arm_pmu *pmu;
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		pmu = per_cpu(probed_pmus, cpu);
+		if (!pmu || pmu->acpi_cpuid != cpuid)
+			continue;
+
+		return pmu;
+	}
+
+	pmu = armpmu_alloc();
+	if (!pmu) {
+		pr_warn("Unable to allocate PMU for CPU%d\n",
+			smp_processor_id());
+		return NULL;
+	}
+
+	pmu->acpi_cpuid = cpuid;
+
+	return pmu;
+}
+
+/*
+ * This must run before the common arm_pmu hotplug logic, so that we can
+ * associate a CPU and its interrupt before the common code tries to manage the
+ * affinity and so on.
+ *
+ * Note that hotplug events are serialized, so we cannot race with another CPU
+ * coming up. The perf core won't open events while a hotplug event is in
+ * progress.
+ */
+static int arm_pmu_acpi_cpu_starting(unsigned int cpu)
+{
+	struct arm_pmu *pmu;
+	struct pmu_hw_events __percpu *hw_events;
+	int irq;
+
+	/* If we've already probed this CPU, we have nothing to do */
+	if (per_cpu(probed_pmus, cpu))
+		return 0;
+
+	irq = per_cpu(pmu_irqs, cpu);
+
+	pmu = arm_pmu_acpi_find_alloc_pmu();
+	if (!pmu)
+		return -ENOMEM;
+
+	cpumask_set_cpu(cpu, &pmu->supported_cpus);
+
+	per_cpu(probed_pmus, cpu) = pmu;
+
+	/*
+	 * Log and request the IRQ so the core arm_pmu code can manage it.  In
+	 * some situations (e.g. mismatched PPIs), we may fail to request the
+	 * IRQ. However, it may be too late for us to do anything about it.
+	 * The common ARM PMU code will log a warning in this case.
+	 */
+	hw_events = pmu->hw_events;
+	per_cpu(hw_events->irq, cpu) = irq;
+	armpmu_request_irq(pmu, cpu);
+
+	/*
+	 * Ideally, we'd probe the PMU here when we find the first matching
+	 * CPU. We can't do that for several reasons; see the comment in
+	 * arm_pmu_acpi_init().
+	 *
+	 * So for the time being, we're done.
+	 */
+	return 0;
+}
+
+int arm_pmu_acpi_probe(armpmu_init_fn init_fn)
+{
+	int pmu_idx = 0;
+	int cpu, ret;
+
+	if (acpi_disabled)
+		return 0;
+
+	/*
+	 * Initialise and register the set of PMUs which we know about right
+	 * now. Ideally we'd do this in arm_pmu_acpi_cpu_starting() so that we
+	 * could handle late hotplug, but this may lead to deadlock since we
+	 * might try to register a hotplug notifier instance from within a
+	 * hotplug notifier.
+	 *
+	 * There's also the problem of having access to the right init_fn,
+	 * without tying this too deeply into the "real" PMU driver.
+	 *
+	 * For the moment, as with the platform/DT case, we need at least one
+	 * of a PMU's CPUs to be online at probe time.
+	 */
+	for_each_possible_cpu(cpu) {
+		struct arm_pmu *pmu = per_cpu(probed_pmus, cpu);
+		char *base_name;
+
+		if (!pmu || pmu->name)
+			continue;
+
+		ret = init_fn(pmu);
+		if (ret == -ENODEV) {
+			/* PMU not handled by this driver, or not present */
+			continue;
+		} else if (ret) {
+			pr_warn("Unable to initialise PMU for CPU%d\n", cpu);
+			return ret;
+		}
+
+		base_name = pmu->name;
+		pmu->name = kasprintf(GFP_KERNEL, "%s_%d", base_name, pmu_idx++);
+		if (!pmu->name) {
+			pr_warn("Unable to allocate PMU name for CPU%d\n", cpu);
+			return -ENOMEM;
+		}
+
+		ret = armpmu_register(pmu);
+		if (ret) {
+			pr_warn("Failed to register PMU for CPU%d\n", cpu);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int arm_pmu_acpi_init(void)
+{
+	int ret;
+
+	if (acpi_disabled)
+		return 0;
+
+	/*
+	 * We can't request IRQs yet, since we don't know the cookie value
+	 * until we know which CPUs share the same logical PMU. We'll handle
+	 * that in arm_pmu_acpi_cpu_starting().
+	 */
+	ret = arm_pmu_acpi_parse_irqs();
+	if (ret)
+		return ret;
+
+	ret = cpuhp_setup_state(CPUHP_AP_PERF_ARM_ACPI_STARTING,
+				"perf/arm/pmu_acpi:starting",
+				arm_pmu_acpi_cpu_starting, NULL);
+
+	return ret;
+}
+subsys_initcall(arm_pmu_acpi_init)
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
index cfcfab3..0f2a803 100644
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -94,6 +94,7 @@ enum cpuhp_state {
 	CPUHP_AP_ARM_VFP_STARTING,
 	CPUHP_AP_ARM64_DEBUG_MONITORS_STARTING,
 	CPUHP_AP_PERF_ARM_HW_BREAKPOINT_STARTING,
+	CPUHP_AP_PERF_ARM_ACPI_STARTING,
 	CPUHP_AP_PERF_ARM_STARTING,
 	CPUHP_AP_ARM_L2X0_STARTING,
 	CPUHP_AP_ARM_ARCH_TIMER_STARTING,
diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h
index 25556eb..1360dd6 100644
--- a/include/linux/perf/arm_pmu.h
+++ b/include/linux/perf/arm_pmu.h
@@ -117,6 +117,9 @@ struct arm_pmu {
 	struct notifier_block	cpu_pm_nb;
 	/* the attr_groups array must be NULL-terminated */
 	const struct attribute_group *attr_groups[ARMPMU_NR_ATTR_GROUPS + 1];
+
+	/* Only to be used by ACPI probing code */
+	unsigned long acpi_cpuid;
 };
 
 #define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
@@ -159,12 +162,20 @@ int arm_pmu_device_probe(struct platform_device *pdev,
 			 const struct of_device_id *of_table,
 			 const struct pmu_probe_info *probe_table);
 
+#ifdef CONFIG_ACPI
+int arm_pmu_acpi_probe(armpmu_init_fn init_fn);
+#else
+static inline int arm_pmu_acpi_probe(armpmu_init_fn init_fn) { return 0; }
+#endif
+
 /* Internal functions only for core arm_pmu code */
 struct arm_pmu *armpmu_alloc(void);
 void armpmu_free(struct arm_pmu *pmu);
 int armpmu_register(struct arm_pmu *pmu);
 int armpmu_request_irqs(struct arm_pmu *armpmu);
 void armpmu_free_irqs(struct arm_pmu *armpmu);
+int armpmu_request_irq(struct arm_pmu *armpmu, int cpu);
+void armpmu_free_irq(struct arm_pmu *armpmu, int cpu);
 
 #define ARMV8_PMU_PDEV_NAME "armv8-pmu"
 
-- 
1.9.1

[PATCHv3 13/14] arm64: pmuv3: handle !PMUv3 when probing

[Mark Rutland]

When probing via ACPI, we won't know up-front whether a CPU has a PMUv3
compatible PMU. Thus we need to consult ID registers during probe time.

This patch updates our PMUv3 probing code to test for the presence of
PMUv3 functionality before touching an PMUv3-specific registers, and
before updating the struct arm_pmu with PMUv3 data.

When a PMUv3-compatible PMU is not present, probing will return -ENODEV.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/kernel/perf_event.c | 87 ++++++++++++++++++++++++++++++++++--------
 1 file changed, 71 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index 57ae9d9..53f2354 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -957,11 +957,26 @@ static int armv8_vulcan_map_event(struct perf_event *event)
 				ARMV8_PMU_EVTYPE_EVENT);
 }
 
+struct armv8pmu_probe_info {
+	struct arm_pmu *pmu;
+	bool present;
+};
+
 static void __armv8pmu_probe_pmu(void *info)
 {
-	struct arm_pmu *cpu_pmu = info;
+	struct armv8pmu_probe_info *probe = info;
+	struct arm_pmu *cpu_pmu = probe->pmu;
+	u64 dfr0, pmuver;
 	u32 pmceid[2];
 
+	dfr0 = read_sysreg(id_aa64dfr0_el1);
+	pmuver = cpuid_feature_extract_unsigned_field(dfr0,
+			ID_AA64DFR0_PMUVER_SHIFT);
+	if (pmuver != 1)
+		return;
+
+	probe->present = true;
+
 	/* Read the nb of CNTx counters supported from PMNC */
 	cpu_pmu->num_events = (armv8pmu_pmcr_read() >> ARMV8_PMU_PMCR_N_SHIFT)
 		& ARMV8_PMU_PMCR_N_MASK;
@@ -979,13 +994,27 @@ static void __armv8pmu_probe_pmu(void *info)
 
 static int armv8pmu_probe_pmu(struct arm_pmu *cpu_pmu)
 {
-	return smp_call_function_any(&cpu_pmu->supported_cpus,
+	struct armv8pmu_probe_info probe = {
+		.pmu = cpu_pmu,
+		.present = false,
+	};
+	int ret;
+
+	ret = smp_call_function_any(&cpu_pmu->supported_cpus,
 				    __armv8pmu_probe_pmu,
-				    cpu_pmu, 1);
+				    &probe, 1);
+	if (ret)
+		return ret;
+
+	return probe.present ? 0 : -ENODEV;
 }
 
-static void armv8_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv8_pmu_init(struct arm_pmu *cpu_pmu)
 {
+	int ret = armv8pmu_probe_pmu(cpu_pmu);
+	if (ret)
+		return ret;
+
 	cpu_pmu->handle_irq		= armv8pmu_handle_irq,
 	cpu_pmu->enable			= armv8pmu_enable_event,
 	cpu_pmu->disable		= armv8pmu_disable_event,
@@ -997,78 +1026,104 @@ static void armv8_pmu_init(struct arm_pmu *cpu_pmu)
 	cpu_pmu->reset			= armv8pmu_reset,
 	cpu_pmu->max_period		= (1LLU << 32) - 1,
 	cpu_pmu->set_event_filter	= armv8pmu_set_event_filter;
+
+	return 0;
 }
 
 static int armv8_pmuv3_init(struct arm_pmu *cpu_pmu)
 {
-	armv8_pmu_init(cpu_pmu);
+	int ret = armv8_pmu_init(cpu_pmu);
+	if (ret)
+		return ret;
+
 	cpu_pmu->name			= "armv8_pmuv3";
 	cpu_pmu->map_event		= armv8_pmuv3_map_event;
 	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
 		&armv8_pmuv3_events_attr_group;
 	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
 		&armv8_pmuv3_format_attr_group;
-	return armv8pmu_probe_pmu(cpu_pmu);
+
+	return 0;
 }
 
 static int armv8_a53_pmu_init(struct arm_pmu *cpu_pmu)
 {
-	armv8_pmu_init(cpu_pmu);
+	int ret = armv8_pmu_init(cpu_pmu);
+	if (ret)
+		return ret;
+
 	cpu_pmu->name			= "armv8_cortex_a53";
 	cpu_pmu->map_event		= armv8_a53_map_event;
 	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
 		&armv8_pmuv3_events_attr_group;
 	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
 		&armv8_pmuv3_format_attr_group;
-	return armv8pmu_probe_pmu(cpu_pmu);
+
+	return 0;
 }
 
 static int armv8_a57_pmu_init(struct arm_pmu *cpu_pmu)
 {
-	armv8_pmu_init(cpu_pmu);
+	int ret = armv8_pmu_init(cpu_pmu);
+	if (ret)
+		return ret;
+
 	cpu_pmu->name			= "armv8_cortex_a57";
 	cpu_pmu->map_event		= armv8_a57_map_event;
 	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
 		&armv8_pmuv3_events_attr_group;
 	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
 		&armv8_pmuv3_format_attr_group;
-	return armv8pmu_probe_pmu(cpu_pmu);
+
+	return 0;
 }
 
 static int armv8_a72_pmu_init(struct arm_pmu *cpu_pmu)
 {
-	armv8_pmu_init(cpu_pmu);
+	int ret = armv8_pmu_init(cpu_pmu);
+	if (ret)
+		return ret;
+
 	cpu_pmu->name			= "armv8_cortex_a72";
 	cpu_pmu->map_event		= armv8_a57_map_event;
 	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
 		&armv8_pmuv3_events_attr_group;
 	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
 		&armv8_pmuv3_format_attr_group;
-	return armv8pmu_probe_pmu(cpu_pmu);
+
+	return 0;
 }
 
 static int armv8_thunder_pmu_init(struct arm_pmu *cpu_pmu)
 {
-	armv8_pmu_init(cpu_pmu);
+	int ret = armv8_pmu_init(cpu_pmu);
+	if (ret)
+		return ret;
+
 	cpu_pmu->name			= "armv8_cavium_thunder";
 	cpu_pmu->map_event		= armv8_thunder_map_event;
 	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
 		&armv8_pmuv3_events_attr_group;
 	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
 		&armv8_pmuv3_format_attr_group;
-	return armv8pmu_probe_pmu(cpu_pmu);
+
+	return 0;
 }
 
 static int armv8_vulcan_pmu_init(struct arm_pmu *cpu_pmu)
 {
-	armv8_pmu_init(cpu_pmu);
+	int ret = armv8_pmu_init(cpu_pmu);
+	if (ret)
+		return ret;
+
 	cpu_pmu->name			= "armv8_brcm_vulcan";
 	cpu_pmu->map_event		= armv8_vulcan_map_event;
 	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
 		&armv8_pmuv3_events_attr_group;
 	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
 		&armv8_pmuv3_format_attr_group;
-	return armv8pmu_probe_pmu(cpu_pmu);
+
+	return 0;
 }
 
 static const struct of_device_id armv8_pmu_of_device_ids[] = {
-- 
1.9.1

[PATCHv3 13/14] arm64: pmuv3: handle !PMUv3 when probing

[Jayachandran C.]

On Tue, Apr 11, 2017 at 2:09 PM, Mark Rutland <mark.rutland@arm.com> wrote:
> When probing via ACPI, we won't know up-front whether a CPU has a PMUv3
> compatible PMU. Thus we need to consult ID registers during probe time.
>
> This patch updates our PMUv3 probing code to test for the presence of
> PMUv3 functionality before touching an PMUv3-specific registers, and
> before updating the struct arm_pmu with PMUv3 data.
>
> When a PMUv3-compatible PMU is not present, probing will return -ENODEV.
>
> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> ---
>  arch/arm64/kernel/perf_event.c | 87 ++++++++++++++++++++++++++++++++++--------
>  1 file changed, 71 insertions(+), 16 deletions(-)
>
> diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
> index 57ae9d9..53f2354 100644
> --- a/arch/arm64/kernel/perf_event.c
> +++ b/arch/arm64/kernel/perf_event.c
> @@ -957,11 +957,26 @@ static int armv8_vulcan_map_event(struct perf_event *event)
>                                 ARMV8_PMU_EVTYPE_EVENT);
>  }
>
> +struct armv8pmu_probe_info {
> +       struct arm_pmu *pmu;
> +       bool present;
> +};
> +
>  static void __armv8pmu_probe_pmu(void *info)
>  {
> -       struct arm_pmu *cpu_pmu = info;
> +       struct armv8pmu_probe_info *probe = info;
> +       struct arm_pmu *cpu_pmu = probe->pmu;
> +       u64 dfr0, pmuver;
>         u32 pmceid[2];
>
> +       dfr0 = read_sysreg(id_aa64dfr0_el1);
> +       pmuver = cpuid_feature_extract_unsigned_field(dfr0,
> +                       ID_AA64DFR0_PMUVER_SHIFT);
> +       if (pmuver != 1)
> +               return;

There is a problem here, the 8.1 spec allows PMUver value 4 for PMUv3
"Performance Monitors extension System registers implemented, PMUv3,
with a 16-bit evtCount field, and if EL2 is implemented, the addition
of the MDCR_EL2.HPMD bit"

On Broadcom Vulcan/Cavium ThunderX2 the value of PMUver is 4 and this
breaks (even the working DT case if I am not mistaken).

JC.

[PATCHv3 13/14] arm64: pmuv3: handle !PMUv3 when probing

[Mark Rutland]

Hi,

On Thu, Apr 13, 2017 at 07:36:45PM +0530, Jayachandran C. wrote:
> On Tue, Apr 11, 2017 at 2:09 PM, Mark Rutland <mark.rutland@arm.com> wrote:
> > When probing via ACPI, we won't know up-front whether a CPU has a PMUv3
> > compatible PMU. Thus we need to consult ID registers during probe time.
> >
> > This patch updates our PMUv3 probing code to test for the presence of
> > PMUv3 functionality before touching an PMUv3-specific registers, and
> > before updating the struct arm_pmu with PMUv3 data.

[..]

> > +       dfr0 = read_sysreg(id_aa64dfr0_el1);
> > +       pmuver = cpuid_feature_extract_unsigned_field(dfr0,
> > +                       ID_AA64DFR0_PMUVER_SHIFT);
> > +       if (pmuver != 1)
> > +               return;
> 
> There is a problem here, the 8.1 spec allows PMUver value 4 for PMUv3
> "Performance Monitors extension System registers implemented, PMUv3,
> with a 16-bit evtCount field, and if EL2 is implemented, the addition
> of the MDCR_EL2.HPMD bit"
>
> On Broadcom Vulcan/Cavium ThunderX2 the value of PMUver is 4 and this
> breaks (even the working DT case if I am not mistaken).

Good point; sorry about this.

Annoyingly, ID_AA64DFR0.PMUVer is a bit weird, and doesn't seem to
strictly follow the rules laid out in ARM DDI 0487B.a, D7.1.4,
"Principles of the ID scheme for fields in ID registers".

Since both 0b0000 and 0b1111 mean that PMUv3 isn't implemented, I don't
know if it should be treated as unsigned with 0xf being special-cased,
or if it should be treated as signed with 0b001 being the minimal
version we expect.

i.e. it's not clear to me if we should do:

	dfr0 = read_sysreg(id_aa64dfr0_el1);
	pmuver = cpuid_feature_extract_unsigned_field(dfr0,
			id_aa64dfr0_pmuver_shift);
	if (pmuver < 1 || pmuver == 0xf)
		return;

... or:

	dfr0 = read_sysreg(id_aa64dfr0_el1);
	pmuver = cpuid_feature_extract_signed_field(dfr0,
			id_aa64dfr0_pmuver_shift);
	if (pmuver < 1)
		return;

I'll try to get that clarified ASAP.

Thanks,
Mark.

[PATCHv3 14/14] arm64: pmuv3: use arm_pmu ACPI framework

[Mark Rutland]

Now that we have a framework to handle the ACPI bits, make the PMUv3
code use this. The framework is a little different to what was
originally envisaged, and we can drop some unused support code in the
process of moving over to it.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/kernel/perf_event.c | 26 +++++++++-----------------
 1 file changed, 9 insertions(+), 17 deletions(-)

diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index 53f2354..156a564 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -1136,24 +1136,9 @@ static int armv8_vulcan_pmu_init(struct arm_pmu *cpu_pmu)
 	{},
 };
 
-/*
- * Non DT systems have their micro/arch events probed at run-time.
- * A fairly complete list of generic events are provided and ones that
- * aren't supported by the current PMU are disabled.
- */
-static const struct pmu_probe_info armv8_pmu_probe_table[] = {
-	PMU_PROBE(0, 0, armv8_pmuv3_init), /* enable all defined counters */
-	{ /* sentinel value */ }
-};
-
 static int armv8_pmu_device_probe(struct platform_device *pdev)
 {
-	if (acpi_disabled)
-		return arm_pmu_device_probe(pdev, armv8_pmu_of_device_ids,
-					    NULL);
-
-	return arm_pmu_device_probe(pdev, armv8_pmu_of_device_ids,
-				    armv8_pmu_probe_table);
+	return arm_pmu_device_probe(pdev, armv8_pmu_of_device_ids, NULL);
 }
 
 static struct platform_driver armv8_pmu_driver = {
@@ -1164,4 +1149,11 @@ static int armv8_pmu_device_probe(struct platform_device *pdev)
 	.probe		= armv8_pmu_device_probe,
 };
 
-builtin_platform_driver(armv8_pmu_driver);
+int __init armv8_pmu_driver_init(void)
+{
+	if (acpi_disabled)
+		return platform_driver_register(&armv8_pmu_driver);
+	else
+		return arm_pmu_acpi_probe(armv8_pmuv3_init);
+}
+device_initcall(armv8_pmu_driver_init)
-- 
1.9.1

[PATCHv3 00/14] arm_pmu: ACPI support

[Anurup M]

On Tuesday 11 April 2017 02:09 PM, Mark Rutland wrote:
> Hi,
>
> This series implements ACPI support in the ARM PMU code. It borrows some code
> from Jeremy's series [1], but takes a different approach to probing and
> association, using the usual hotplug state machine, minimising external changes
> required, and simplifying the relationship with the common arm_pmu code.
>
> The first few patches are preparatory cleanup/refactoring, with the latter half
> of the series being specific to ACPI support.
>
> The series is based on Will's perf/updates branch [2]. I've pushed the whole
> series out to the arm/perf/acpi branch [3] of my kernel.org repo.
>
> Due to the innards of the hotplug callback framework, it's not entirely
> safe to register a PMU in a hotplug callback. Due to this, we can only
> associated hotplugged CPUs with a PMU if a matching CPU was around at
> probe time. A similar restriction already applies to DT systems. We may
> be able to relax this with some future work.
>
> I've given this some testing on a Juno platform (using SPIs). To see that IRQs
> are correctly associated, I've tested with the following:
>
>    $ taskset -c ${SOME_CPU_HERE} perf record \
>      -e armv8_pmuv3_0/cpu_cycles/ \
>      -e armv8_pmuv3_1/cpu_cycles/ \
>      cat /proc/interrupts
>   
> I've also booted with nr_cpus temporarily capped (passing maxcpus=) to test the
> association logic. This has also been tested in a VM using PPIs; I do not have
> access to a host machine which itself uses PPIs.

I have tried these patches on a Hisilicon D03 board.
The perf list, basic perf events and perf fuzzer results are all fine.

'perf list' on Hisilicon D03
--------------------------------

   L1-dcache-load-misses                              [Hardware cache event]
   L1-dcache-loads                                    [Hardware cache event]
   L1-dcache-store-misses                             [Hardware cache event]
   L1-dcache-stores                                   [Hardware cache event]
   L1-icache-load-misses                              [Hardware cache event]
   L1-icache-loads                                    [Hardware cache event]
   branch-load-misses                                 [Hardware cache event]
   branch-loads                                       [Hardware cache event]
   dTLB-load-misses                                   [Hardware cache event]
   iTLB-load-misses                                   [Hardware cache event]

   armv8_pmuv3_0/br_mis_pred/                         [Kernel PMU event]
   armv8_pmuv3_0/br_pred/                             [Kernel PMU event]
   armv8_pmuv3_0/bus_access/                          [Kernel PMU event]
   armv8_pmuv3_0/bus_cycles/                          [Kernel PMU event]
   armv8_pmuv3_0/cid_write_retired/                   [Kernel PMU event]
   armv8_pmuv3_0/cpu_cycles/                          [Kernel PMU event]
   armv8_pmuv3_0/exc_return/                          [Kernel PMU event]
   armv8_pmuv3_0/exc_taken/                           [Kernel PMU event]
   armv8_pmuv3_0/inst_retired/                        [Kernel PMU event]
   armv8_pmuv3_0/inst_spec/                           [Kernel PMU event]
   armv8_pmuv3_0/l1d_cache/                           [Kernel PMU event]
   armv8_pmuv3_0/l1d_cache_refill/                    [Kernel PMU event]
   armv8_pmuv3_0/l1d_cache_wb/                        [Kernel PMU event]
   armv8_pmuv3_0/l1d_tlb_refill/                      [Kernel PMU event]
   armv8_pmuv3_0/l1i_cache/                           [Kernel PMU event]
   armv8_pmuv3_0/l1i_cache_refill/                    [Kernel PMU event]
   armv8_pmuv3_0/l1i_tlb_refill/                      [Kernel PMU event]
   armv8_pmuv3_0/l2d_cache/                           [Kernel PMU event]
   armv8_pmuv3_0/l2d_cache_refill/                    [Kernel PMU event]
   armv8_pmuv3_0/l2d_cache_wb/                        [Kernel PMU event]
   armv8_pmuv3_0/mem_access/                          [Kernel PMU event]
   armv8_pmuv3_0/memory_error/                        [Kernel PMU event]
   armv8_pmuv3_0/sw_incr/                             [Kernel PMU event]
   armv8_pmuv3_0/ttbr_write_retired/                  [Kernel PMU event]

Thanks,
Anurup

> Since v1 [4]:
> * Fix up ACPI bits per Lorenzo's request
> * Accumulate tags
> * Check presence of PMUv3
>
> Since v2 [5]:
> * Clean up GSIs when a request fails
> * Rename parse/unparse functions
> * Use cpuid_feature_extract_unsigned_field() for PMUVer
> * Drop parking protocol cleanups. I'll resend these later.
>
> Thanks,
> Mark.
>
> [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-January/482397.html
> [2] git://git.kernel.org/pub/scm/linux/kernel/git/will/linux.git perf/updates
> [3] git://git.kernel.org/pub/scm/linux/kernel/git/mark/linux.git arm/perf/acpi
> [4] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-March/492897.html
> [5] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-April/499982.html
>
> Mark Rutland (14):
>    drivers/perf: arm_pmu: remove pointless PMU disabling
>    drivers/perf: arm_pmu: define armpmu_init_fn
>    drivers/perf: arm_pmu: fold init into alloc
>    drivers/perf: arm_pmu: factor out pmu registration
>    drivers/perf: arm_pmu: simplify cpu_pmu_request_irqs()
>    drivers/perf: arm_pmu: handle no platform_device
>    drivers/perf: arm_pmu: rename irq request/free functions
>    drivers/perf: arm_pmu: split cpu-local irq request/free
>    drivers/perf: arm_pmu: move irq request/free into probe
>    drivers/perf: arm_pmu: split out platform device probe logic
>    arm64: add function to get a cpu's MADT GICC table
>    drivers/perf: arm_pmu: add ACPI framework
>    arm64: pmuv3: handle !PMUv3 when probing
>    arm64: pmuv3: use arm_pmu ACPI framework
>
>   arch/arm64/include/asm/acpi.h   |   2 +
>   arch/arm64/kernel/perf_event.c  | 113 ++++++++----
>   arch/arm64/kernel/smp.c         |  10 ++
>   drivers/perf/Kconfig            |   4 +
>   drivers/perf/Makefile           |   3 +-
>   drivers/perf/arm_pmu.c          | 387 ++++++++++------------------------------
>   drivers/perf/arm_pmu_acpi.c     | 256 ++++++++++++++++++++++++++
>   drivers/perf/arm_pmu_platform.c | 235 ++++++++++++++++++++++++
>   include/linux/cpuhotplug.h      |   1 +
>   include/linux/perf/arm_pmu.h    |  22 ++-
>   10 files changed, 708 insertions(+), 325 deletions(-)
>   create mode 100644 drivers/perf/arm_pmu_acpi.c
>   create mode 100644 drivers/perf/arm_pmu_platform.c
>

[PATCHv3 00/14] arm_pmu: ACPI support

[Will Deacon]

On Tue, Apr 11, 2017 at 09:39:43AM +0100, Mark Rutland wrote:
> This series implements ACPI support in the ARM PMU code. It borrows some code
> from Jeremy's series [1], but takes a different approach to probing and
> association, using the usual hotplug state machine, minimising external changes
> required, and simplifying the relationship with the common arm_pmu code.
> 
> The first few patches are preparatory cleanup/refactoring, with the latter half
> of the series being specific to ACPI support.
> 
> The series is based on Will's perf/updates branch [2]. I've pushed the whole
> series out to the arm/perf/acpi branch [3] of my kernel.org repo.

Thanks, I've queued this up so it should appear in linux-next shortly.

Will

[PATCHv3 00/14] arm_pmu: ACPI support

[Hanjun Guo]

On 2017/4/11 16:39, Mark Rutland wrote:
> Hi,
>
> This series implements ACPI support in the ARM PMU code. It borrows some code
> from Jeremy's series [1], but takes a different approach to probing and
> association, using the usual hotplug state machine, minimising external changes
> required, and simplifying the relationship with the common arm_pmu code.
>
> The first few patches are preparatory cleanup/refactoring, with the latter half
> of the series being specific to ACPI support.
>
> The series is based on Will's perf/updates branch [2]. I've pushed the whole
> series out to the arm/perf/acpi branch [3] of my kernel.org repo.
>
> Due to the innards of the hotplug callback framework, it's not entirely
> safe to register a PMU in a hotplug callback. Due to this, we can only
> associated hotplugged CPUs with a PMU if a matching CPU was around at
> probe time. A similar restriction already applies to DT systems. We may
> be able to relax this with some future work.
>
> I've given this some testing on a Juno platform (using SPIs). To see that IRQs
> are correctly associated, I've tested with the following:
>
>   $ taskset -c ${SOME_CPU_HERE} perf record \
>     -e armv8_pmuv3_0/cpu_cycles/ \
>     -e armv8_pmuv3_1/cpu_cycles/ \
>     cat /proc/interrupts
>  
> I've also booted with nr_cpus temporarily capped (passing maxcpus=) to test the
> association logic. This has also been tested in a VM using PPIs; I do not have
> access to a host machine which itself uses PPIs.

Hisilicon D03 using PPIs, I tested this patch set on D03 and basic perf events
work well.

Tested-by: Hanjun Guo <hanjun.guo@linaro.org>

Thanks
Hanjun