Re: [PATCH net-next v6 00/11] net: ethernet: ti: add networking support for k3 am65x/j721e soc

[Vladimir Oltean <olteanv@gmail.com>]

Hi David,

On Mon, 30 Mar 2020 at 21:14, Grygorii Strashko
<grygorii.strashko@ti.com> wrote:
>
> Hi
>
> On 30/03/2020 11:28, Sekhar Nori wrote:
> > On 30/03/20 1:06 PM, Sekhar Nori wrote:
> >> On 30/03/20 12:45 PM, Tero Kristo wrote:
> >>> On 28/03/2020 03:53, Vladimir Oltean wrote:
> >>>> Hi David,
> >>>>
> >>>> On Fri, 27 Mar 2020 at 05:02, David Miller <davem@davemloft.net> wrote:
> >>>>>
> >>>>> From: Grygorii Strashko <grygorii.strashko@ti.com>
> >>>>> Date: Tue, 24 Mar 2020 00:52:43 +0200
> >>>>>
> >>>>>> This v6 series adds basic networking support support TI K3
> >>>>>> AM654x/J721E SoC which
> >>>>>> have integrated Gigabit Ethernet MAC (Media Access Controller) into
> >>>>>> device MCU
> >>>>>> domain and named MCU_CPSW0 (CPSW2G NUSS).
> >>>>>    ...
> >>>>>
> >>>>> Series applied, thank you.
> >>>>
> >>>> The build is now broken on net-next:
> >>>>
> >>>> arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi:303.23-309.6: ERROR
> >>>> (phandle_references):
> >>>> /interconnect@100000/interconnect@28380000/ethernet@46000000/ethernet-ports/port@1:
> >>>>
> >>>> Reference to non-existent node
> >>>> or label "mcu_conf"
> >>>>
> >>>>     also defined at
> >>>> arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts:471.13-474.3
> >>>> arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi:303.23-309.6: ERROR
> >>>> (phandle_references):
> >>>> /interconnect@100000/interconnect@28380000/ethernet@46000000/ethernet-ports/port@1:
> >>>>
> >>>> Reference to non-existent node
> >>>> or label "phy_gmii_sel"
> >>>>
> >>>>     also defined at
> >>>> arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts:471.13-474.3
> >>>>
> >>>> As Grygorii said:
> >>>>
> >>>> Patches 1-6 are intended for netdev, Patches 7-11 are intended for K3
> >>>> Platform
> >>>> tree and provided here for testing purposes.
> >>>
> >>> Yeah, I think you are missing a dependency that was applied via the K3
> >>> branch earlier. They are in linux-next now, but I am not so sure how
> >>> much that is going to help you.
> >>>
> >>> You could just drop the DT patches from this merge and let me apply them
> >>> via the platform branch.
> >>
> >> One other option would be that Dave merges your K3 tag which was sent to
> >> ARM SoC to net-next. Its based on v5.6-rc1, has no other dependencies,
> >> is already in linux-next, should be immutable and safe to merge. This
> >> has the advantage that no rebase is necessary on net-next.
> >>
> >> git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux
> >> tags/ti-k3-soc-for-v5.7
> >
> > FWIW, I was able to reproduce the build failure reported by Vladimir on
> > net-next, merge Tero's tag (above) cleanly into it, and see that ARM64
> > defconfig build on net-next succeeds after the merge.
>
> Thank you Sekhar for checking this.
>
> I'm very sorry for introducing this issue. I've tried hard to avoid such issue,
> but still missed it (probably I have had to drop DT patches from last submission
> and send them separately).
>
> Sorry again.
>
> --
> Best regards,
> grygorii

I think the ARM64 build is now also broken on Linus' master branch,
after the net-next merge? I am not quite sure if the device tree
patches were supposed to land in mainline the way they did.

Thanks,
-Vladimir

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel