From: jon.mason@broadcom.com (Jon Mason)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/6] net: ethernet: bgmac: Add platform device support
Date: Fri, 8 Jul 2016 11:52:42 -0400 [thread overview]
Message-ID: <CAC3K-4r6wsL++uO8KZWYf75KNCrEGi3VB9vbWbWT_yVUP7TgWg@mail.gmail.com> (raw)
In-Reply-To: <1467932938-21819-1-git-send-email-jon.mason@broadcom.com>
On Thu, Jul 7, 2016 at 7:08 PM, Jon Mason <jon.mason@broadcom.com> wrote:
> David Miller, Please consider including patches 1-5 in net-next
>
> Florian Fainelli, Please consider including patches 6 & 7 in
> devicetree/next
Oops. I didn't send out the 7th patch in this series. Sending out
shortly as 7/7.
Thanks,
Jon
> Changes in v2:
> * Made device tree binding changes suggested by Sergei Shtylyov,
> Ray Jui, Rob Herring, Florian Fainelli, and Arnd Bergmann
> * Removed devm_* error paths in the bgmac_platform.c suggested by
> Florian Fainelli
> * Added Arnd Bergmann's Acked-by to the first 5 (there were changes
> outlined in the bullets above, but I believe them to be minor enough
> for him to not revoke his acks)
>
>
> This patch series adds support for other, non-bcma iProc SoC's to the
> bgmac driver. This series only adds NSP support, but we are interested
> in adding support for the Cygnus and NS2 families (with more possible
> down the road).
>
> To support non-bcma enabled SoCs, we need to add the standard device
> tree "platform device" support. Unfortunately, this driver is very
> tighly coupled with the bcma bus and much unwinding is needed. I tried
> to break this up into a number of patches to make it more obvious what
> was being done to add platform device support. I was able to verify
> that the bcma code still works using a 53012K board (NS SoC), and that
> the platform code works using a 58625K board (NSP SoC).
>
> Thanks,
> Jon
>
>
> Jon Mason (6):
> net: ethernet: bgmac: change bgmac_* prints to dev_* prints
> net: ethernet: bgmac: add dma_dev pointer
> net: ethernet: bgmac: move BCMA MDIO Phy code into a separate file
> net: ethernet: bgmac: convert to feature flags
> net: ethernet: bgmac: Add platform device support
> dt-bindings: net: bgmac: add bindings documentation for bgmac
>
> .../devicetree/bindings/net/brcm,amac.txt | 24 +
> .../devicetree/bindings/net/brcm,bgmac-nsp.txt | 24 +
> drivers/net/ethernet/broadcom/Kconfig | 23 +-
> drivers/net/ethernet/broadcom/Makefile | 2 +
> drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c | 266 +++++++++
> drivers/net/ethernet/broadcom/bgmac-bcma.c | 315 ++++++++++
> drivers/net/ethernet/broadcom/bgmac-platform.c | 189 ++++++
> drivers/net/ethernet/broadcom/bgmac.c | 658 +++++----------------
> drivers/net/ethernet/broadcom/bgmac.h | 112 +++-
> 9 files changed, 1097 insertions(+), 516 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/brcm,amac.txt
> create mode 100644 Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt
> create mode 100644 drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c
> create mode 100644 drivers/net/ethernet/broadcom/bgmac-bcma.c
> create mode 100644 drivers/net/ethernet/broadcom/bgmac-platform.c
>
> --
> 1.9.1
>
next prev parent reply other threads:[~2016-07-08 15:52 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-07 23:08 [PATCH v2 0/6] net: ethernet: bgmac: Add platform device support Jon Mason
2016-07-07 23:08 ` [PATCH v2 1/6] net: ethernet: bgmac: change bgmac_* prints to dev_* prints Jon Mason
2016-07-08 18:10 ` Florian Fainelli
2016-07-07 23:08 ` [PATCH v2 2/6] net: ethernet: bgmac: add dma_dev pointer Jon Mason
2016-07-08 18:11 ` Florian Fainelli
2016-07-07 23:08 ` [PATCH v2 3/6] net: ethernet: bgmac: move BCMA MDIO Phy code into a separate file Jon Mason
2016-07-08 18:11 ` Florian Fainelli
2016-07-07 23:08 ` [PATCH v2 4/6] net: ethernet: bgmac: convert to feature flags Jon Mason
2016-07-08 18:11 ` Florian Fainelli
2016-08-17 11:34 ` Rafał Miłecki
2016-09-20 5:19 ` Rafał Miłecki
2016-09-20 13:59 ` Jon Mason
2016-07-07 23:08 ` [PATCH v2 5/6] net: ethernet: bgmac: Add platform device support Jon Mason
2016-07-08 18:11 ` Florian Fainelli
2016-07-07 23:08 ` [PATCH v2 6/6] dt-bindings: net: bgmac: add bindings documentation for bgmac Jon Mason
2016-07-08 18:12 ` Florian Fainelli
2016-07-11 16:48 ` Florian Fainelli
2016-07-13 13:39 ` Rob Herring
2016-07-08 15:52 ` Jon Mason [this message]
2016-07-08 22:47 ` [PATCH v2 0/6] net: ethernet: bgmac: Add platform device support David Miller
2016-07-08 18:09 ` Florian Fainelli
2016-07-09 22:11 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAC3K-4r6wsL++uO8KZWYf75KNCrEGi3VB9vbWbWT_yVUP7TgWg@mail.gmail.com \
--to=jon.mason@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).