* [PATCH] ARM: dont specify STACKPROTECTOR in defconfigs
@ 2016-07-21 15:11 Paul Gortmaker
2016-07-21 15:23 ` Eric Anholt
2016-07-21 16:10 ` Joel Stanley
0 siblings, 2 replies; 4+ messages in thread
From: Paul Gortmaker @ 2016-07-21 15:11 UTC (permalink / raw)
To: linux-arm-kernel
Note the output from the following:
$ git grep STACKPROTECTOR arch/arm/configs/
arch/arm/configs/aspeed_g4_defconfig:CONFIG_CC_STACKPROTECTOR_STRONG=y
arch/arm/configs/aspeed_g5_defconfig:CONFIG_CC_STACKPROTECTOR_STRONG=y
arch/arm/configs/bcm2835_defconfig:CONFIG_CC_STACKPROTECTOR_REGULAR=y
$
Only three defconfigs specify a value. And two of the three ask for
the strong variant, which isn't supported by older toolchains.
Due to the nature of ARM having more platform specific code than say
x86, the allyesconfig and allmodconfig aren't as effective for build
coverage. So, in addition, I like to use a trivial script to walk all
the defconfigs and build each one.
However I will get false positives on unsupported stackprotector values
with an older toolchain like gcc-4.6.3. As in this instance I am just
using the compiler as a glorified syntax checker on a machine where I
build a bunch of other arch for the same reason, there is no real
motivation to get a newer toolchain for improved optimization etc.
Since there are only three of them, and there is nothing about these
settings that are board/platform specific, I propose we just eliminate
the three existing instances and take the default.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Joel Stanley <joel@jms.id.au>
Cc: linux-arm-kernel at lists.infradead.org
Cc: bcm-kernel-feedback-list at broadcom.com
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
arch/arm/configs/aspeed_g4_defconfig | 1 -
arch/arm/configs/aspeed_g5_defconfig | 1 -
arch/arm/configs/bcm2835_defconfig | 1 -
3 files changed, 3 deletions(-)
diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig
index b6e54ee9bdbd..78dae22c56de 100644
--- a/arch/arm/configs/aspeed_g4_defconfig
+++ b/arch/arm/configs/aspeed_g4_defconfig
@@ -18,7 +18,6 @@ CONFIG_BPF_SYSCALL=y
CONFIG_EMBEDDED=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-CONFIG_CC_STACKPROTECTOR_STRONG=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLOCK is not set
diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig
index 892605167357..2253a09cc3c2 100644
--- a/arch/arm/configs/aspeed_g5_defconfig
+++ b/arch/arm/configs/aspeed_g5_defconfig
@@ -18,7 +18,6 @@ CONFIG_BPF_SYSCALL=y
CONFIG_EMBEDDED=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-CONFIG_CC_STACKPROTECTOR_STRONG=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLOCK is not set
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index cc55e4252fda..8c06b380c561 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -24,7 +24,6 @@ CONFIG_EMBEDDED=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_JUMP_LABEL=y
-CONFIG_CC_STACKPROTECTOR_REGULAR=y
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM2835=y
--
2.8.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] ARM: dont specify STACKPROTECTOR in defconfigs
2016-07-21 15:11 [PATCH] ARM: dont specify STACKPROTECTOR in defconfigs Paul Gortmaker
@ 2016-07-21 15:23 ` Eric Anholt
2016-07-21 16:10 ` Joel Stanley
1 sibling, 0 replies; 4+ messages in thread
From: Eric Anholt @ 2016-07-21 15:23 UTC (permalink / raw)
To: linux-arm-kernel
Paul Gortmaker <paul.gortmaker@windriver.com> writes:
> Note the output from the following:
>
> $ git grep STACKPROTECTOR arch/arm/configs/
> arch/arm/configs/aspeed_g4_defconfig:CONFIG_CC_STACKPROTECTOR_STRONG=y
> arch/arm/configs/aspeed_g5_defconfig:CONFIG_CC_STACKPROTECTOR_STRONG=y
> arch/arm/configs/bcm2835_defconfig:CONFIG_CC_STACKPROTECTOR_REGULAR=y
> $
I don't see why rpi1 shoud be special, so for bcm2835:
Acked-by: Eric Anholt <eric@anholt.net>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 818 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160721/5c207bcf/attachment.sig>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] ARM: dont specify STACKPROTECTOR in defconfigs
2016-07-21 15:11 [PATCH] ARM: dont specify STACKPROTECTOR in defconfigs Paul Gortmaker
2016-07-21 15:23 ` Eric Anholt
@ 2016-07-21 16:10 ` Joel Stanley
2016-07-21 18:04 ` Paul Gortmaker
1 sibling, 1 reply; 4+ messages in thread
From: Joel Stanley @ 2016-07-21 16:10 UTC (permalink / raw)
To: linux-arm-kernel
Hi Paul,
On Fri, Jul 22, 2016 at 12:41 AM, Paul Gortmaker
<paul.gortmaker@windriver.com> wrote:
> Note the output from the following:
>
> $ git grep STACKPROTECTOR arch/arm/configs/
> arch/arm/configs/aspeed_g4_defconfig:CONFIG_CC_STACKPROTECTOR_STRONG=y
> arch/arm/configs/aspeed_g5_defconfig:CONFIG_CC_STACKPROTECTOR_STRONG=y
> arch/arm/configs/bcm2835_defconfig:CONFIG_CC_STACKPROTECTOR_REGULAR=y
> $
>
> Only three defconfigs specify a value. And two of the three ask for
> the strong variant, which isn't supported by older toolchains.
>
> Due to the nature of ARM having more platform specific code than say
> x86, the allyesconfig and allmodconfig aren't as effective for build
> coverage. So, in addition, I like to use a trivial script to walk all
> the defconfigs and build each one.
>
> However I will get false positives on unsupported stackprotector values
> with an older toolchain like gcc-4.6.3. As in this instance I am just
> using the compiler as a glorified syntax checker on a machine where I
> build a bunch of other arch for the same reason, there is no real
> motivation to get a newer toolchain for improved optimization etc.
I'm happy to remove it from the Aspeed configurations as I'm not sure
why it was enabled in the first place.
However, I do not agree with the reasoning here. If you're building to
check syntax a modern GCC will certainly pick up on more than one from
four years ago.
> Since there are only three of them, and there is nothing about these
> settings that are board/platform specific, I propose we just eliminate
> the three existing instances and take the default.
This makes sense to me.
Acked-by: Joel Stanley <joel@jms.id.au>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] ARM: dont specify STACKPROTECTOR in defconfigs
2016-07-21 16:10 ` Joel Stanley
@ 2016-07-21 18:04 ` Paul Gortmaker
0 siblings, 0 replies; 4+ messages in thread
From: Paul Gortmaker @ 2016-07-21 18:04 UTC (permalink / raw)
To: linux-arm-kernel
[Re: [PATCH] ARM: dont specify STACKPROTECTOR in defconfigs] On 22/07/2016 (Fri 01:40) Joel Stanley wrote:
> Hi Paul,
>
> On Fri, Jul 22, 2016 at 12:41 AM, Paul Gortmaker
> <paul.gortmaker@windriver.com> wrote:
> > Note the output from the following:
> >
> > $ git grep STACKPROTECTOR arch/arm/configs/
> > arch/arm/configs/aspeed_g4_defconfig:CONFIG_CC_STACKPROTECTOR_STRONG=y
> > arch/arm/configs/aspeed_g5_defconfig:CONFIG_CC_STACKPROTECTOR_STRONG=y
> > arch/arm/configs/bcm2835_defconfig:CONFIG_CC_STACKPROTECTOR_REGULAR=y
> > $
> >
> > Only three defconfigs specify a value. And two of the three ask for
> > the strong variant, which isn't supported by older toolchains.
> >
> > Due to the nature of ARM having more platform specific code than say
> > x86, the allyesconfig and allmodconfig aren't as effective for build
> > coverage. So, in addition, I like to use a trivial script to walk all
> > the defconfigs and build each one.
> >
> > However I will get false positives on unsupported stackprotector values
> > with an older toolchain like gcc-4.6.3. As in this instance I am just
> > using the compiler as a glorified syntax checker on a machine where I
> > build a bunch of other arch for the same reason, there is no real
> > motivation to get a newer toolchain for improved optimization etc.
>
> I'm happy to remove it from the Aspeed configurations as I'm not sure
> why it was enabled in the first place.
>
> However, I do not agree with the reasoning here. If you're building to
> check syntax a modern GCC will certainly pick up on more than one from
> four years ago.
Just to clarify, syntax in this case is just for fat fingered typos and
ensuring functions resolve with the appropriate header includes. If I
was coding new stuff specifically for ARM, then that would be different.
>
> > Since there are only three of them, and there is nothing about these
> > settings that are board/platform specific, I propose we just eliminate
> > the three existing instances and take the default.
>
> This makes sense to me.
>
> Acked-by: Joel Stanley <joel@jms.id.au>
Thanks,
Paul.
--
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-07-21 18:04 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-07-21 15:11 [PATCH] ARM: dont specify STACKPROTECTOR in defconfigs Paul Gortmaker
2016-07-21 15:23 ` Eric Anholt
2016-07-21 16:10 ` Joel Stanley
2016-07-21 18:04 ` Paul Gortmaker
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).