From: linus.walleij@linaro.org (Linus Walleij)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/33] gpio: add generic single-register fixed-direction GPIO driver
Date: Wed, 14 Sep 2016 10:50:12 +0200 [thread overview]
Message-ID: <CACRpkda3jzCOXG5Qrmqo95gnF4vcAe=i-sanJ2k_4BdrE08PkA@mail.gmail.com> (raw)
In-Reply-To: <CACRpkdZkCHqYYpYKA+Nvj4XY1zecdbZxMuRe=bbdziJL2fHf6w@mail.gmail.com>
On Thu, Sep 8, 2016 at 3:21 PM, Linus Walleij <linus.walleij@linaro.org> wrote:
> On Mon, Sep 5, 2016 at 2:26 PM, Russell King - ARM Linux
> <linux@armlinux.org.uk> wrote:
>> On Mon, Sep 05, 2016 at 11:06:28AM +0200, Linus Walleij wrote:
>>> I couldn't resist testing on the Compaq iPAQ h3600. It works the
>>> same as before so:
>>> Tested-by: Linus Walleij <linus.walleij@linaro.org> [for Compaq iPAQ H3600]
>>
>> Great news. I've been thinking about digging out my h3600, but it's
>> very old, and hasn't been turned on for many years. I'm not sure what
>> state it's in.
>>
>> I've been hoping to try booting some kernels with qemu-system-arm, but
>> so far I've completely failed to get qemu-system-arm to do anything
>> useful - it just sits there doing apparently nothing, irrespective of
>> which platform I choose or which kernel I give it.
>>
>>> The only news in the bootlog is this:
>>> sa11x0-pcmcia: probe of sa11x0-pcmcia failed with error -2
>>
>> Not so great news - that's -ENOENT. Did that happen before these
>> changes? That could be that the gpiod lookup table isn't found.
>> However, if that were the case, I'd have expected an error message
>> along the lines of:
>>
>> Failed to get GPIO for xxx: -nnn
>>
>> from soc_pcmcia_request_gpiods(). The other possibility is that
>> we're not getting to sa11x0_drv_pcmcia_legacy_probe() but instead
>> trying to initialise it as a generic sa11x0 socket, and
>> sa11x0_pcmcia_hw_init() is failing as a result.
>>
>> We should be using the legacy probe on H3600, so sa11x0_pcmcia_hw_init()
>> should never be reached.
>
> However that is what happens, this is my callstack after
> adding some prints:
>
> sa11x0_pcmcia_init
> sa11x0_drv_pcmcia_probe
> soc_pcmcia_init_one
> soc_pcmcia_add_one
> soc_pcmcia_hw_init
> sa11x0_pcmcia_hw_init
> soc_pcmcia_add_one: pcmcia HW init failed
> sa11x0-pcmcia: probe of sa11x0-pcmcia failed with error -2
Bah I found the cause, just a simple oneliner typo in one of
the patches. I will comment on the patch in question so you can
fix it up on your branch.
Yours,
Linus Walleij
next prev parent reply other threads:[~2016-09-14 8:50 UTC|newest]
Thread overview: 127+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-29 10:02 [PATCH 0/3] SA11x0/PXA pcmcia fixes Russell King - ARM Linux
2016-08-29 10:03 ` [PATCH 1/3] pcmcia: sa11xx_base: fix reporting of timing information Russell King
2016-08-29 10:03 ` [PATCH 2/3] pcmcia: sa11xx_base: add units to the " Russell King
2016-08-29 10:03 ` [PATCH 3/3] pcmcia: soc_common: fix SS_STSCHG polarity Russell King
2016-08-29 10:23 ` [RFC PATCH 00/33] SA11x0/PXA GPIO rework (Core + PCMCIA only) Russell King - ARM Linux
2016-08-29 10:24 ` [PATCH 01/33] gpio: sa1100: fix irq probing for ucb1x00 Russell King
2016-09-07 22:25 ` Linus Walleij
2016-08-29 10:24 ` [PATCH 02/33] gpio: sa1100: use sa11x0_gpio_set_wake() Russell King
2016-08-29 10:24 ` [PATCH 03/33] gpio: sa1100: convert to use IO accessors Russell King
2016-08-29 10:24 ` [PATCH 04/33] gpio: sa1100: implement get_direction method Russell King
2016-08-29 10:24 ` [PATCH 05/33] gpio: add generic single-register fixed-direction GPIO driver Russell King
2016-08-29 19:39 ` Robert Jarzmik
2016-08-29 23:12 ` Russell King - ARM Linux
2016-08-30 6:08 ` Alexander Shiyan
2016-08-30 7:41 ` Russell King - ARM Linux
2016-08-30 9:18 ` Russell King - ARM Linux
2016-08-30 16:42 ` Robert Jarzmik
2016-08-30 18:46 ` Russell King - ARM Linux
2016-08-30 21:32 ` Robert Jarzmik
2016-08-31 8:49 ` Russell King - ARM Linux
2016-08-31 10:27 ` Russell King - ARM Linux
2016-09-01 7:19 ` Robert Jarzmik
2016-09-01 9:27 ` Russell King - ARM Linux
2016-09-01 21:58 ` Robert Jarzmik
2016-09-01 23:02 ` Russell King - ARM Linux
2016-09-02 17:50 ` Robert Jarzmik
2016-09-02 18:56 ` Russell King - ARM Linux
2016-09-02 21:21 ` Robert Jarzmik
2016-09-02 23:34 ` Russell King - ARM Linux
2016-09-03 9:15 ` Russell King - ARM Linux
2016-09-03 9:09 ` Russell King - ARM Linux
2016-09-03 10:25 ` Russell King - ARM Linux
2016-09-03 11:31 ` Robert Jarzmik
2016-09-04 19:04 ` Robert Jarzmik
2016-09-04 20:18 ` Russell King - ARM Linux
2016-09-05 9:06 ` Linus Walleij
2016-09-05 12:26 ` Russell King - ARM Linux
2016-09-08 13:21 ` Linus Walleij
2016-09-14 8:50 ` Linus Walleij [this message]
2016-08-30 21:25 ` Linus Walleij
2016-08-30 21:42 ` Russell King - ARM Linux
2016-08-30 21:47 ` Linus Walleij
2016-09-02 17:00 ` Russell King - ARM Linux
2016-09-04 20:53 ` Linus Walleij
2016-08-29 10:24 ` [PATCH 06/33] ARM: pxa/lubbock: add GPIO driver for LUB_MISC_WR register Russell King
2016-08-29 19:57 ` Robert Jarzmik
2016-08-29 22:58 ` Russell King - ARM Linux
2016-08-29 10:24 ` [PATCH 07/33] ARM: sa1100/assabet: add BCR/BSR GPIO driver Russell King
2016-08-29 10:24 ` [PATCH 08/33] ARM: sa1100/neponset: add GPIO drivers for control and modem registers Russell King
2016-08-29 10:24 ` [PATCH 09/33] ARM: sa1111: implement a gpio_chip for SA1111 GPIOs Russell King
2016-08-29 10:24 ` [PATCH 10/33] pcmcia: soc_common: switch to using gpio_descs Russell King
2016-09-14 11:29 ` Linus Walleij
2016-09-14 12:10 ` Russell King - ARM Linux
2016-08-29 10:25 ` [PATCH 11/33] pcmcia: soc_common: request legacy detect GPIO with active low Russell King
2016-08-29 10:25 ` [PATCH 12/33] pcmcia: soc_common: add support for reset and bus enable GPIOs Russell King
2016-08-29 10:25 ` [PATCH 13/33] pcmcia: soc_common: restore previous socket state on error Russell King
2016-08-29 10:25 ` [PATCH 14/33] pcmcia: soc_common: add CF socket state helper Russell King
2016-08-29 10:25 ` [PATCH 15/33] pcmcia: soc_common: add support for Vcc and Vpp regulators Russell King
2016-08-29 10:25 ` [PATCH 16/33] pcmcia: soc_common: switch to a per-socket cpufreq notifier Russell King
2016-08-29 10:25 ` [PATCH 17/33] pcmcia: soc_common: constify pcmcia_low_level ops pointer Russell King
2016-08-29 10:25 ` [PATCH 18/33] pcmcia: sa1100: provide generic CF support Russell King
2016-09-14 8:52 ` Linus Walleij
2016-09-14 9:06 ` Russell King - ARM Linux
2016-09-14 11:13 ` Linus Walleij
2016-08-29 10:25 ` [PATCH 19/33] pcmcia: sa1111: add driver-data pointer Russell King
2016-08-29 10:25 ` [PATCH 20/33] pcmcia: add MAX1600 driver Russell King
2016-08-29 10:25 ` [PATCH 21/33] ARM: sa1100: provide infrastructure to support generic CF sockets Russell King
2016-08-29 10:25 ` [PATCH 22/33] ARM: sa1100/assabet: convert to " Russell King
2016-08-29 10:26 ` [PATCH 23/33] ARM: sa1100/cerf: " Russell King
2016-08-29 10:26 ` [PATCH 24/33] ARM: sa1100/h3xxx: switch h3xxx PCMCIA to use gpiod APIs Russell King
2016-08-29 10:26 ` [PATCH 25/33] ARM: sa1100/nanoengine: convert to generic CF sockets Russell King
2016-08-29 10:26 ` [PATCH 26/33] ARM: sa1100/shannon: switch shannon PCMCIA to use gpiod APIs Russell King
2016-08-29 10:26 ` [PATCH 27/33] ARM: sa1100/simpad: switch simpad CF " Russell King
2016-08-29 10:26 ` [PATCH 28/33] ARM: sa1100/neponset: add GPIOs for PCMCIA Russell King
2016-08-29 10:26 ` [PATCH 29/33] pcmcia: sa1111/neponset: convert to use MAX1600 power driver Russell King
2016-08-29 10:26 ` [PATCH 30/33] ARM: sa1100/jornada720: switch jornada720 PCMCIA to gpiod APIs Russell King
2016-08-29 10:26 ` [PATCH 31/33] ARM: pxa/lubbock: convert PCMCIA to use MAX1600 driver Russell King
2016-08-29 10:26 ` [PATCH 32/33] pcmcia: sa1100*: remove redundant bvd1/bvd2 setting Russell King
2016-08-29 10:26 ` [PATCH 33/33] ARM: sa1111: remove legacy GPIO interfaces Russell King
2016-08-29 11:01 ` [PATCH 0/3] SA11x0 gpio keys/leds Russell King - ARM Linux
2016-08-29 11:03 ` [PATCH 1/3] ARM: sa1100/assabet: add gpio keys support for right-hand two buttons Russell King
2016-08-29 11:03 ` [PATCH 2/3] ARM: sa1100/assabet: switch to using gpio leds Russell King
2016-08-29 11:03 ` [PATCH 3/3] ARM: sa1100/cerf: switch to using gpio_led_register_device() Russell King
2016-08-29 11:25 ` [PATCH 0/8] SA11x0 DMA engine/IrDA updates Russell King - ARM Linux
2016-08-29 11:26 ` [PATCH 1/8] dmaengine: sa11x0: add DMA filters Russell King
2016-08-30 15:57 ` Vinod Koul
2016-08-29 11:26 ` [PATCH 2/8] net: irda/sa1100_ir: convert to dma_request_slave_channel() Russell King
2016-08-29 11:26 ` [PATCH 3/8] net: irda/sa1100_ir: add gpiod APIs for controlling IrDA transceiver Russell King
2016-08-29 11:26 ` [PATCH 4/8] dmaengine: sa11x0: unexport sa11x0_dma_filter_fn and clean up Russell King
2016-08-30 15:58 ` Vinod Koul
2016-08-29 11:26 ` [PATCH 5/8] ARM: sa1100/assabet: switch assabet IrDA to use gpiod APIs Russell King
2016-08-29 11:26 ` [PATCH 6/8] ARM: sa1100/collie: switch collie " Russell King
2016-08-29 11:26 ` [PATCH 7/8] ARM: sa1100/h3xxx: switch h3xxx " Russell King
2016-08-29 11:26 ` [PATCH 8/8] net: irda/sa1100_ir: remove sa11x0 irda platform data Russell King
2016-08-29 12:05 ` [PATCH 0/6] SA11x0 serial updates Russell King - ARM Linux
2016-08-29 12:05 ` [PATCH 1/6] serial: sa1100: add support for mctrl gpios Russell King
2016-08-31 13:25 ` Greg Kroah-Hartman
2016-08-29 12:05 ` [PATCH 2/6] ARM: sa1100/assabet: convert serial to gpiod APIs Russell King
2016-08-29 12:06 ` [PATCH 3/6] ARM: sa1100/h3xxx: " Russell King
2016-08-29 12:06 ` [PATCH 4/6] ARM: sa1100/badge4: remove commented out modem control initialisers Russell King
2016-08-29 12:06 ` [PATCH 5/6] ARM: sa1100/hackkit: remove empty serial mctrl functions Russell King
2016-08-29 12:06 ` [PATCH 6/6] ARM: sa1100/neponset: convert serial to use gpiod APIs Russell King
2016-08-30 10:51 ` [PATCH 0/4] SA11x0 Clocks and removal of Neponset SMC91x hack Russell King - ARM Linux
2016-08-30 10:52 ` [PATCH 1/4] ARM: sa1100: convert to common clock framework Russell King
2016-08-30 10:52 ` [PATCH 2/4] net: smc91x: add external clock support Russell King
2016-08-30 10:52 ` [PATCH 3/4] ARM: sa1100/neponset: add ethernet oscillator Russell King
2016-08-30 10:52 ` [PATCH 4/4] net: smc91x: remove neponset specific oscillator hack Russell King
2016-08-30 10:59 ` [PATCH 0/8] SA11x0/PXA remainder & cleanups Russell King - ARM Linux
2016-08-30 11:00 ` [PATCH 1/8] mfd: ucb1x00: allow IRQ probing to work with IRQs > 32 Russell King
2016-08-30 12:00 ` Lee Jones
2016-08-30 11:00 ` [PATCH 2/8] ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view Russell King
2016-08-30 11:00 ` [PATCH 3/8] ARM: sa1100/cerf: remove redundant definitions Russell King
2016-08-30 11:00 ` [PATCH 4/8] ARM: sa1100/cerf: move cerf header file Russell King
2016-08-30 11:00 ` [PATCH 5/8] ARM: sa1100/nanoengine: remove redundant definitions Russell King
2016-08-30 11:00 ` [PATCH 6/8] ARM: sa1100/nanoengine: move nanoengine header file Russell King
2016-08-30 11:00 ` [PATCH 7/8] ARM: sa1100/neponset: remove neponset_ncr_* GPIO interfaces and header Russell King
2016-08-30 11:01 ` [PATCH 8/8] ARM: sa1100: remove SA-1101 header file Russell King
2016-08-30 15:31 ` [PATCH 0/4] SA11x0 Clocks and removal of Neponset SMC91x hack Nicolas Pitre
2016-09-01 23:32 ` David Miller
2016-09-02 18:59 ` Russell King - ARM Linux
2016-09-05 9:09 ` [PATCH 0/6] SA11x0 serial updates Linus Walleij
2016-09-05 12:28 ` Russell King - ARM Linux
2016-09-07 22:28 ` Linus Walleij
2016-09-08 13:23 ` Linus Walleij
2016-08-30 21:31 ` [RFC PATCH 00/33] SA11x0/PXA GPIO rework (Core + PCMCIA only) Linus Walleij
2016-09-01 15:34 ` Russell King - ARM Linux
2016-09-06 14:46 ` [PATCH 0/3] SA11x0/PXA pcmcia fixes Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CACRpkda3jzCOXG5Qrmqo95gnF4vcAe=i-sanJ2k_4BdrE08PkA@mail.gmail.com' \
--to=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).