From: rmk+kernel@armlinux.org.uk (Russell King)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/8] ARM: sa1100/neponset: remove neponset_ncr_* GPIO interfaces and header
Date: Tue, 30 Aug 2016 12:00:56 +0100 [thread overview]
Message-ID: <E1begmm-0007Ik-EQ@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <20160830105950.GA15580@n2100.armlinux.org.uk>
Remove the legacy neponset_ncr_*() interfaces and definitions, which
leaves the header empty apart from the header and footer. Remove the
header as well.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
arch/arm/mach-sa1100/include/mach/neponset.h | 30 ----------------------------
arch/arm/mach-sa1100/neponset.c | 14 +------------
2 files changed, 1 insertion(+), 43 deletions(-)
delete mode 100644 arch/arm/mach-sa1100/include/mach/neponset.h
diff --git a/arch/arm/mach-sa1100/include/mach/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h
deleted file mode 100644
index 5516a52a329d..000000000000
--- a/arch/arm/mach-sa1100/include/mach/neponset.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/neponset.h
- *
- * Created 2000/06/05 by Nicolas Pitre <nico@fluxnic.net>
- *
- * This file contains the hardware specific definitions for Assabet
- * Only include this file from SA1100-specific files.
- *
- * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
- * Definitions for Neponset added.
- */
-#ifndef __ASM_ARCH_NEPONSET_H
-#define __ASM_ARCH_NEPONSET_H
-
-/*
- * Neponset definitions:
- */
-#define NCR_GP01_OFF (1<<0)
-#define NCR_TP_PWR_EN (1<<1)
-#define NCR_MS_PWR_EN (1<<2)
-#define NCR_ENET_OSC_EN (1<<3)
-#define NCR_SPI_KB_WK_UP (1<<4)
-#define NCR_A0VPP (1<<5)
-#define NCR_A1VPP (1<<6)
-
-void neponset_ncr_frob(unsigned int, unsigned int);
-#define neponset_ncr_set(v) neponset_ncr_frob(0, v)
-#define neponset_ncr_clear(v) neponset_ncr_frob(v, 0)
-
-#endif
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 700659cadebb..b3c2266b2302 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -25,7 +25,6 @@
#include <mach/hardware.h>
#include <mach/assabet.h>
-#include <mach/neponset.h>
#include <mach/irqs.h>
#define NEP_IRQ_SMC91X 0
@@ -48,6 +47,7 @@
#define IRR_USAR (1 << 1)
#define IRR_SA1111 (1 << 2)
+#define NCR_GP01_OFF BIT(0)
#define NCR_NGPIO 7
#define MDM_CTL0_NGPIO 4
#define MDM_CTL1_NGPIO 6
@@ -124,18 +124,6 @@ static struct gpiod_lookup_table neponset_pcmcia_table = {
static struct neponset_drvdata *nep;
-void neponset_ncr_frob(unsigned int mask, unsigned int val)
-{
- struct neponset_drvdata *n = nep;
- unsigned long m = mask, v = val;
-
- if (nep)
- n->gpio[0]->set_multiple(n->gpio[0], &m, &v);
- else
- WARN(1, "nep unset\n");
-}
-EXPORT_SYMBOL(neponset_ncr_frob);
-
/*
* Install handler for Neponset IRQ. Note that we have to loop here
* since the ETHERNET and USAR IRQs are level based, and we need to
--
2.1.0
next prev parent reply other threads:[~2016-08-30 11:00 UTC|newest]
Thread overview: 127+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-29 10:02 [PATCH 0/3] SA11x0/PXA pcmcia fixes Russell King - ARM Linux
2016-08-29 10:03 ` [PATCH 1/3] pcmcia: sa11xx_base: fix reporting of timing information Russell King
2016-08-29 10:03 ` [PATCH 2/3] pcmcia: sa11xx_base: add units to the " Russell King
2016-08-29 10:03 ` [PATCH 3/3] pcmcia: soc_common: fix SS_STSCHG polarity Russell King
2016-08-29 10:23 ` [RFC PATCH 00/33] SA11x0/PXA GPIO rework (Core + PCMCIA only) Russell King - ARM Linux
2016-08-29 10:24 ` [PATCH 01/33] gpio: sa1100: fix irq probing for ucb1x00 Russell King
2016-09-07 22:25 ` Linus Walleij
2016-08-29 10:24 ` [PATCH 02/33] gpio: sa1100: use sa11x0_gpio_set_wake() Russell King
2016-08-29 10:24 ` [PATCH 03/33] gpio: sa1100: convert to use IO accessors Russell King
2016-08-29 10:24 ` [PATCH 04/33] gpio: sa1100: implement get_direction method Russell King
2016-08-29 10:24 ` [PATCH 05/33] gpio: add generic single-register fixed-direction GPIO driver Russell King
2016-08-29 19:39 ` Robert Jarzmik
2016-08-29 23:12 ` Russell King - ARM Linux
2016-08-30 6:08 ` Alexander Shiyan
2016-08-30 7:41 ` Russell King - ARM Linux
2016-08-30 9:18 ` Russell King - ARM Linux
2016-08-30 16:42 ` Robert Jarzmik
2016-08-30 18:46 ` Russell King - ARM Linux
2016-08-30 21:32 ` Robert Jarzmik
2016-08-31 8:49 ` Russell King - ARM Linux
2016-08-31 10:27 ` Russell King - ARM Linux
2016-09-01 7:19 ` Robert Jarzmik
2016-09-01 9:27 ` Russell King - ARM Linux
2016-09-01 21:58 ` Robert Jarzmik
2016-09-01 23:02 ` Russell King - ARM Linux
2016-09-02 17:50 ` Robert Jarzmik
2016-09-02 18:56 ` Russell King - ARM Linux
2016-09-02 21:21 ` Robert Jarzmik
2016-09-02 23:34 ` Russell King - ARM Linux
2016-09-03 9:15 ` Russell King - ARM Linux
2016-09-03 9:09 ` Russell King - ARM Linux
2016-09-03 10:25 ` Russell King - ARM Linux
2016-09-03 11:31 ` Robert Jarzmik
2016-09-04 19:04 ` Robert Jarzmik
2016-09-04 20:18 ` Russell King - ARM Linux
2016-09-05 9:06 ` Linus Walleij
2016-09-05 12:26 ` Russell King - ARM Linux
2016-09-08 13:21 ` Linus Walleij
2016-09-14 8:50 ` Linus Walleij
2016-08-30 21:25 ` Linus Walleij
2016-08-30 21:42 ` Russell King - ARM Linux
2016-08-30 21:47 ` Linus Walleij
2016-09-02 17:00 ` Russell King - ARM Linux
2016-09-04 20:53 ` Linus Walleij
2016-08-29 10:24 ` [PATCH 06/33] ARM: pxa/lubbock: add GPIO driver for LUB_MISC_WR register Russell King
2016-08-29 19:57 ` Robert Jarzmik
2016-08-29 22:58 ` Russell King - ARM Linux
2016-08-29 10:24 ` [PATCH 07/33] ARM: sa1100/assabet: add BCR/BSR GPIO driver Russell King
2016-08-29 10:24 ` [PATCH 08/33] ARM: sa1100/neponset: add GPIO drivers for control and modem registers Russell King
2016-08-29 10:24 ` [PATCH 09/33] ARM: sa1111: implement a gpio_chip for SA1111 GPIOs Russell King
2016-08-29 10:24 ` [PATCH 10/33] pcmcia: soc_common: switch to using gpio_descs Russell King
2016-09-14 11:29 ` Linus Walleij
2016-09-14 12:10 ` Russell King - ARM Linux
2016-08-29 10:25 ` [PATCH 11/33] pcmcia: soc_common: request legacy detect GPIO with active low Russell King
2016-08-29 10:25 ` [PATCH 12/33] pcmcia: soc_common: add support for reset and bus enable GPIOs Russell King
2016-08-29 10:25 ` [PATCH 13/33] pcmcia: soc_common: restore previous socket state on error Russell King
2016-08-29 10:25 ` [PATCH 14/33] pcmcia: soc_common: add CF socket state helper Russell King
2016-08-29 10:25 ` [PATCH 15/33] pcmcia: soc_common: add support for Vcc and Vpp regulators Russell King
2016-08-29 10:25 ` [PATCH 16/33] pcmcia: soc_common: switch to a per-socket cpufreq notifier Russell King
2016-08-29 10:25 ` [PATCH 17/33] pcmcia: soc_common: constify pcmcia_low_level ops pointer Russell King
2016-08-29 10:25 ` [PATCH 18/33] pcmcia: sa1100: provide generic CF support Russell King
2016-09-14 8:52 ` Linus Walleij
2016-09-14 9:06 ` Russell King - ARM Linux
2016-09-14 11:13 ` Linus Walleij
2016-08-29 10:25 ` [PATCH 19/33] pcmcia: sa1111: add driver-data pointer Russell King
2016-08-29 10:25 ` [PATCH 20/33] pcmcia: add MAX1600 driver Russell King
2016-08-29 10:25 ` [PATCH 21/33] ARM: sa1100: provide infrastructure to support generic CF sockets Russell King
2016-08-29 10:25 ` [PATCH 22/33] ARM: sa1100/assabet: convert to " Russell King
2016-08-29 10:26 ` [PATCH 23/33] ARM: sa1100/cerf: " Russell King
2016-08-29 10:26 ` [PATCH 24/33] ARM: sa1100/h3xxx: switch h3xxx PCMCIA to use gpiod APIs Russell King
2016-08-29 10:26 ` [PATCH 25/33] ARM: sa1100/nanoengine: convert to generic CF sockets Russell King
2016-08-29 10:26 ` [PATCH 26/33] ARM: sa1100/shannon: switch shannon PCMCIA to use gpiod APIs Russell King
2016-08-29 10:26 ` [PATCH 27/33] ARM: sa1100/simpad: switch simpad CF " Russell King
2016-08-29 10:26 ` [PATCH 28/33] ARM: sa1100/neponset: add GPIOs for PCMCIA Russell King
2016-08-29 10:26 ` [PATCH 29/33] pcmcia: sa1111/neponset: convert to use MAX1600 power driver Russell King
2016-08-29 10:26 ` [PATCH 30/33] ARM: sa1100/jornada720: switch jornada720 PCMCIA to gpiod APIs Russell King
2016-08-29 10:26 ` [PATCH 31/33] ARM: pxa/lubbock: convert PCMCIA to use MAX1600 driver Russell King
2016-08-29 10:26 ` [PATCH 32/33] pcmcia: sa1100*: remove redundant bvd1/bvd2 setting Russell King
2016-08-29 10:26 ` [PATCH 33/33] ARM: sa1111: remove legacy GPIO interfaces Russell King
2016-08-29 11:01 ` [PATCH 0/3] SA11x0 gpio keys/leds Russell King - ARM Linux
2016-08-29 11:03 ` [PATCH 1/3] ARM: sa1100/assabet: add gpio keys support for right-hand two buttons Russell King
2016-08-29 11:03 ` [PATCH 2/3] ARM: sa1100/assabet: switch to using gpio leds Russell King
2016-08-29 11:03 ` [PATCH 3/3] ARM: sa1100/cerf: switch to using gpio_led_register_device() Russell King
2016-08-29 11:25 ` [PATCH 0/8] SA11x0 DMA engine/IrDA updates Russell King - ARM Linux
2016-08-29 11:26 ` [PATCH 1/8] dmaengine: sa11x0: add DMA filters Russell King
2016-08-30 15:57 ` Vinod Koul
2016-08-29 11:26 ` [PATCH 2/8] net: irda/sa1100_ir: convert to dma_request_slave_channel() Russell King
2016-08-29 11:26 ` [PATCH 3/8] net: irda/sa1100_ir: add gpiod APIs for controlling IrDA transceiver Russell King
2016-08-29 11:26 ` [PATCH 4/8] dmaengine: sa11x0: unexport sa11x0_dma_filter_fn and clean up Russell King
2016-08-30 15:58 ` Vinod Koul
2016-08-29 11:26 ` [PATCH 5/8] ARM: sa1100/assabet: switch assabet IrDA to use gpiod APIs Russell King
2016-08-29 11:26 ` [PATCH 6/8] ARM: sa1100/collie: switch collie " Russell King
2016-08-29 11:26 ` [PATCH 7/8] ARM: sa1100/h3xxx: switch h3xxx " Russell King
2016-08-29 11:26 ` [PATCH 8/8] net: irda/sa1100_ir: remove sa11x0 irda platform data Russell King
2016-08-29 12:05 ` [PATCH 0/6] SA11x0 serial updates Russell King - ARM Linux
2016-08-29 12:05 ` [PATCH 1/6] serial: sa1100: add support for mctrl gpios Russell King
2016-08-31 13:25 ` Greg Kroah-Hartman
2016-08-29 12:05 ` [PATCH 2/6] ARM: sa1100/assabet: convert serial to gpiod APIs Russell King
2016-08-29 12:06 ` [PATCH 3/6] ARM: sa1100/h3xxx: " Russell King
2016-08-29 12:06 ` [PATCH 4/6] ARM: sa1100/badge4: remove commented out modem control initialisers Russell King
2016-08-29 12:06 ` [PATCH 5/6] ARM: sa1100/hackkit: remove empty serial mctrl functions Russell King
2016-08-29 12:06 ` [PATCH 6/6] ARM: sa1100/neponset: convert serial to use gpiod APIs Russell King
2016-08-30 10:51 ` [PATCH 0/4] SA11x0 Clocks and removal of Neponset SMC91x hack Russell King - ARM Linux
2016-08-30 10:52 ` [PATCH 1/4] ARM: sa1100: convert to common clock framework Russell King
2016-08-30 10:52 ` [PATCH 2/4] net: smc91x: add external clock support Russell King
2016-08-30 10:52 ` [PATCH 3/4] ARM: sa1100/neponset: add ethernet oscillator Russell King
2016-08-30 10:52 ` [PATCH 4/4] net: smc91x: remove neponset specific oscillator hack Russell King
2016-08-30 10:59 ` [PATCH 0/8] SA11x0/PXA remainder & cleanups Russell King - ARM Linux
2016-08-30 11:00 ` [PATCH 1/8] mfd: ucb1x00: allow IRQ probing to work with IRQs > 32 Russell King
2016-08-30 12:00 ` Lee Jones
2016-08-30 11:00 ` [PATCH 2/8] ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view Russell King
2016-08-30 11:00 ` [PATCH 3/8] ARM: sa1100/cerf: remove redundant definitions Russell King
2016-08-30 11:00 ` [PATCH 4/8] ARM: sa1100/cerf: move cerf header file Russell King
2016-08-30 11:00 ` [PATCH 5/8] ARM: sa1100/nanoengine: remove redundant definitions Russell King
2016-08-30 11:00 ` [PATCH 6/8] ARM: sa1100/nanoengine: move nanoengine header file Russell King
2016-08-30 11:00 ` Russell King [this message]
2016-08-30 11:01 ` [PATCH 8/8] ARM: sa1100: remove SA-1101 " Russell King
2016-08-30 15:31 ` [PATCH 0/4] SA11x0 Clocks and removal of Neponset SMC91x hack Nicolas Pitre
2016-09-01 23:32 ` David Miller
2016-09-02 18:59 ` Russell King - ARM Linux
2016-09-05 9:09 ` [PATCH 0/6] SA11x0 serial updates Linus Walleij
2016-09-05 12:28 ` Russell King - ARM Linux
2016-09-07 22:28 ` Linus Walleij
2016-09-08 13:23 ` Linus Walleij
2016-08-30 21:31 ` [RFC PATCH 00/33] SA11x0/PXA GPIO rework (Core + PCMCIA only) Linus Walleij
2016-09-01 15:34 ` Russell King - ARM Linux
2016-09-06 14:46 ` [PATCH 0/3] SA11x0/PXA pcmcia fixes Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1begmm-0007Ik-EQ@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).