* iMX6Q - PCIe
@ 2014-07-23 21:49 John Tobias
2014-07-23 22:16 ` Eric Bénard
0 siblings, 1 reply; 5+ messages in thread
From: John Tobias @ 2014-07-23 21:49 UTC (permalink / raw)
To: linux-arm-kernel
Hi All,
I am trying to use the PCIe on iMX6Q and I am using kernel 3.15.2 and
AEH-AR9462-LC WFI-BT module.
The said module were able to detect by the kernel, able to bring up
the wifi and bluetooth interface and able to scan bluetooth devices as
as scan wifi.
When, I run /usr/sbin/wpa_supplicant -Dnl80211 -iwlp1s0
-c/tmp/wpa_supplicant.conf, I got the following logs (please see
below). The wpa supplicant keeps trying to connect but for unknown
reason, it keeps disconnecting.
Any idea?.
Regards,
john
[ 572.744649] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
wlp1s0: CTRL-EVENT-SCAN-STARTED
wlp1s0: SME: Trying to authentica[ 576.314045] wlp1s0: authenticate
with d8:c7:c8:3b:e0:72
te with d8:c7:c8:3b:e0:72 (SSID='MySSID' freq=5580 MHz)
[ 576.334915] wlp1s0: direct probe to d8:c7:c8:3b:e0:72 (try 1/3)
[ 576.541579] wlp1s0: direct probe to d8:c7:c8:3b:e0:72 (try 2/3)
[ 576.748576] wlp1s0: direct probe to d8:c7:c8:3b:e0:72 (try 3/3)
[ 576.955575] wlp1s0: authentication with d8:c7:c8:3b:e0:72 timed out
wlp1s0: CTRL-EVENT-SCAN-STARTED
wlp1s0: SME: Trying to authentica[ 577.469346] wlp1s0: authenticate
with d8:c7:c8:3b:e0:62
te with d8:c7:c8:3b:e0:62 (SSID='MySSID' freq=2462 MHz)
[ 577.489959] wlp1s0: direct probe to d8:c7:c8:3b:e0:62 (try 1/3)
[ 577.696656] wlp1s0: direct probe to d8:c7:c8:3b:e0:62 (try 2/3)
[ 577.903586] wlp1s0: direct probe to d8:c7:c8:3b:e0:62 (try 3/3)
[ 578.110586] wlp1s0: authentication with d8:c7:c8:3b:e0:62 timed out
wlp1s0: CTRL-EVENT-SCAN-STARTED
wlp1s0: SME: Trying to authentica[ 578.565037] wlp1s0: authenticate
with 6c:f3:7f:1a:22:2a
te with 6c:f3:7f:1a:22:2a (SSID='MySSID' freq=5240 MHz)
[ 578.586309] wlp1s0: direct probe to 6c:f3:7f:1a:22:2a (try 1/3)
[ 578.792580] wlp1s0: direct probe to 6c:f3:7f:1a:22:2a (try 2/3)
[ 578.999627] wlp1s0: direct probe to 6c:f3:7f:1a:22:2a (try 3/3)
[ 579.206576] wlp1s0: authentication with 6c:f3:7f:1a:22:2a timed out
wlp1s0: CTRL-EVENT-SCAN-STARTED
wlp1s0: SME: Trying to authentica[ 579.594670] wlp1s0: authenticate
with 24:de:c6:18:36:52
te with 24:de:c6:18:36:52 (SSID='MySSID' freq=5660 MHz)
[ 579.615907] wlp1s0: direct probe to 24:de:c6:18:36:52 (try 1/3)
[ 579.822587] wlp1s0: direct probe to 24:de:c6:18:36:52 (try 2/3)
[ 580.029587] wlp1s0: direct probe to 24:de:c6:18:36:52 (try 3/3)
[ 580.236582] wlp1s0: authentication with 24:de:c6:18:36:52 timed out
wlp1s0: CTRL-EVENT-SCAN-STARTED
wlp1s0: SME: Trying to authentica[ 580.510611] wlp1s0: authenticate
with 6c:f3:7f:1a:2a:6a
te with 6c:f3:7f:1a:2a:6a (SSID='MySSID' freq=5200 MHz)
[ 580.532053] wlp1s0: direct probe to 6c:f3:7f:1a:2a:6a (try 1/3)
\x03[ 580.539067] wlp1s0: aborting authentication with 6c:f3:7f:1a:2a:6a
by local choice (Reason: 3=DEAUTH_LEAVING)
wlp1s0: CTRL-EVENT-DISCONNECTED bssid=6c:f3:7f:1a:2a:6a reason=3
locally_generated=1
^ permalink raw reply [flat|nested] 5+ messages in thread
* iMX6Q - PCIe
2014-07-23 21:49 iMX6Q - PCIe John Tobias
@ 2014-07-23 22:16 ` Eric Bénard
2014-07-23 22:44 ` John Tobias
0 siblings, 1 reply; 5+ messages in thread
From: Eric Bénard @ 2014-07-23 22:16 UTC (permalink / raw)
To: linux-arm-kernel
Hi John,
Le Wed, 23 Jul 2014 14:49:15 -0700,
John Tobias <john.tobias.ph@gmail.com> a ?crit :
> I am trying to use the PCIe on iMX6Q and I am using kernel 3.15.2 and
> AEH-AR9462-LC WFI-BT module.
>
> The said module were able to detect by the kernel, able to bring up
> the wifi and bluetooth interface and able to scan bluetooth devices as
> as scan wifi.
>
> When, I run /usr/sbin/wpa_supplicant -Dnl80211 -iwlp1s0
> -c/tmp/wpa_supplicant.conf, I got the following logs (please see
> below). The wpa supplicant keeps trying to connect but for unknown
> reason, it keeps disconnecting.
>
>
> Any idea?.
>
you can try to disable MSI (at least that's how I got ath9k working in
FSL's kernel)
Eric
^ permalink raw reply [flat|nested] 5+ messages in thread
* iMX6Q - PCIe
2014-07-23 22:16 ` Eric Bénard
@ 2014-07-23 22:44 ` John Tobias
2014-07-24 7:54 ` Eric Bénard
0 siblings, 1 reply; 5+ messages in thread
From: John Tobias @ 2014-07-23 22:44 UTC (permalink / raw)
To: linux-arm-kernel
Hi Eric,
I have a few questions:
1. May I know what FSL's kernel version you are using?.
2. Did you make changes in your device tree for PCIe?.
3. Can I have the model/part # of your ath9k?.
Regards,
john
On Wed, Jul 23, 2014 at 3:16 PM, Eric B?nard <eric@eukrea.com> wrote:
> Hi John,
>
> Le Wed, 23 Jul 2014 14:49:15 -0700,
> John Tobias <john.tobias.ph@gmail.com> a ?crit :
>> I am trying to use the PCIe on iMX6Q and I am using kernel 3.15.2 and
>> AEH-AR9462-LC WFI-BT module.
>>
>> The said module were able to detect by the kernel, able to bring up
>> the wifi and bluetooth interface and able to scan bluetooth devices as
>> as scan wifi.
>>
>> When, I run /usr/sbin/wpa_supplicant -Dnl80211 -iwlp1s0
>> -c/tmp/wpa_supplicant.conf, I got the following logs (please see
>> below). The wpa supplicant keeps trying to connect but for unknown
>> reason, it keeps disconnecting.
>>
>>
>> Any idea?.
>>
> you can try to disable MSI (at least that's how I got ath9k working in
> FSL's kernel)
>
> Eric
^ permalink raw reply [flat|nested] 5+ messages in thread
* iMX6Q - PCIe
2014-07-23 22:44 ` John Tobias
@ 2014-07-24 7:54 ` Eric Bénard
2014-07-24 18:40 ` John Tobias
0 siblings, 1 reply; 5+ messages in thread
From: Eric Bénard @ 2014-07-24 7:54 UTC (permalink / raw)
To: linux-arm-kernel
Hi John,
Le Wed, 23 Jul 2014 15:44:47 -0700,
John Tobias <john.tobias.ph@gmail.com> a ?crit :
> I have a few questions:
>
> 1. May I know what FSL's kernel version you are using?.
was 3.0.35 + backport from 3.14 for 802.11 + ath9k from
http://drvbp1.linux-foundation.org/~mcgrof/rel-html/backports/
> 2. Did you make changes in your device tree for PCIe?.
no DT on this kernel
> 3. Can I have the model/part # of your ath9k?.
tested with Mikrotik R11E & Ubiquiti SR71
Eric
^ permalink raw reply [flat|nested] 5+ messages in thread
* iMX6Q - PCIe
2014-07-24 7:54 ` Eric Bénard
@ 2014-07-24 18:40 ` John Tobias
0 siblings, 0 replies; 5+ messages in thread
From: John Tobias @ 2014-07-24 18:40 UTC (permalink / raw)
To: linux-arm-kernel
Hi Eric,
Thanks for the info.
I tested 3 PCIe modules and one of them got working properly on kernel
3.15.2 and the fsl kernel 3.10.17.
Regards,
john
On Thu, Jul 24, 2014 at 12:54 AM, Eric B?nard <eric@eukrea.com> wrote:
> Hi John,
>
> Le Wed, 23 Jul 2014 15:44:47 -0700,
> John Tobias <john.tobias.ph@gmail.com> a ?crit :
>> I have a few questions:
>>
>> 1. May I know what FSL's kernel version you are using?.
> was 3.0.35 + backport from 3.14 for 802.11 + ath9k from
> http://drvbp1.linux-foundation.org/~mcgrof/rel-html/backports/
>
>> 2. Did you make changes in your device tree for PCIe?.
> no DT on this kernel
>
>> 3. Can I have the model/part # of your ath9k?.
> tested with Mikrotik R11E & Ubiquiti SR71
>
> Eric
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-07-24 18:40 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-07-23 21:49 iMX6Q - PCIe John Tobias
2014-07-23 22:16 ` Eric Bénard
2014-07-23 22:44 ` John Tobias
2014-07-24 7:54 ` Eric Bénard
2014-07-24 18:40 ` John Tobias
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).