From: Daniel Baluta <daniel.baluta@gmail.com>
To: Andra Danciu <andradanciu1997@gmail.com>
Cc: "Mark Rutland" <mark.rutland@arm.com>,
"Devicetree List" <devicetree@vger.kernel.org>,
"Abel Vesa" <abel.vesa@nxp.com>,
"Anson Huang" <Anson.Huang@nxp.com>,
"Carlo Caione" <ccaione@baylibre.com>,
andrew.smirnov@gmail.com, "Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Angus Ainslie (Purism)" <angus@akkea.ca>,
"Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
dl-linux-imx <linux-imx@nxp.com>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"Guido Günther" <agx@sigxcpu.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
"Lucas Stach" <l.stach@pengutronix.de>
Subject: Re: [PATCH v3] arm64: dts: imx8mq: Add sai3 and sai6 nodes
Date: Wed, 3 Jul 2019 09:27:56 +0300 [thread overview]
Message-ID: <CAEnQRZDO4FzsC-MZGsxd=7dxSc0dRGcMjWW-W9T2TF7C1iD9NA@mail.gmail.com> (raw)
In-Reply-To: <20190702132353.18632-1-andradanciu1997@gmail.com>
On Tue, Jul 2, 2019 at 4:25 PM Andra Danciu <andradanciu1997@gmail.com> wrote:
>
> SAI3 and SAI6 nodes are used to connect to an external codec.
> They have 1 Tx and 1 Rx dataline.
>
> Cc: Daniel Baluta <daniel.baluta@nxp.com>
> Signed-off-by: Andra Danciu <andradanciu1997@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
> ---
> Changes since v2:
> - removed multiple new lines
>
> Changes since v1:
> - Added sai3 node because we need it to enable audio on pico-pi-8m
> - Added commit description
>
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 29 +++++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index d09b808eff87..736cf81b695e 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -278,6 +278,20 @@
> #size-cells = <1>;
> ranges = <0x30000000 0x30000000 0x400000>;
>
> + sai6: sai@30030000 {
> + compatible = "fsl,imx8mq-sai",
> + "fsl,imx6sx-sai";
> + reg = <0x30030000 0x10000>;
> + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MQ_CLK_SAI6_IPG>,
> + <&clk IMX8MQ_CLK_SAI6_ROOT>,
> + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> +
> gpio1: gpio@30200000 {
> compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
> reg = <0x30200000 0x10000>;
> @@ -728,6 +742,21 @@
> status = "disabled";
> };
>
> + sai3: sai@308c0000 {
> + compatible = "fsl,imx8mq-sai",
> + "fsl,imx6sx-sai";
> + reg = <0x308c0000 0x10000>;
> + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MQ_CLK_SAI3_IPG>,
> + <&clk IMX8MQ_CLK_DUMMY>,
> + <&clk IMX8MQ_CLK_SAI3_ROOT>,
> + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> +
> i2c1: i2c@30a20000 {
> compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
> reg = <0x30a20000 0x10000>;
> --
> 2.11.0
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-07-03 6:28 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-02 13:23 [PATCH v3] arm64: dts: imx8mq: Add sai3 and sai6 nodes Andra Danciu
2019-07-03 6:27 ` Daniel Baluta [this message]
2019-07-03 13:00 ` Angus Ainslie
2019-07-03 13:10 ` Daniel Baluta
2019-07-03 13:12 ` Angus Ainslie
2019-07-03 13:25 ` Daniel Baluta
2019-07-03 13:58 ` Angus Ainslie
2019-07-16 15:58 ` Lucas Stach
2019-07-17 14:04 ` Daniel Baluta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAEnQRZDO4FzsC-MZGsxd=7dxSc0dRGcMjWW-W9T2TF7C1iD9NA@mail.gmail.com' \
--to=daniel.baluta@gmail.com \
--cc=Anson.Huang@nxp.com \
--cc=abel.vesa@nxp.com \
--cc=agx@sigxcpu.org \
--cc=andradanciu1997@gmail.com \
--cc=andrew.smirnov@gmail.com \
--cc=angus@akkea.ca \
--cc=ccaione@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).