* [PATCH v2] i2c: exynos5: Preserve high speed master code
@ 2021-02-16 22:25 Mårten Lindahl
2021-02-17 8:35 ` Krzysztof Kozlowski
2021-02-26 10:34 ` Wolfram Sang
0 siblings, 2 replies; 5+ messages in thread
From: Mårten Lindahl @ 2021-02-16 22:25 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: linux-samsung-soc, linux-kernel, Mårten Lindahl, kernel,
linux-i2c, linux-arm-kernel
From: Mårten Lindahl <martenli@axis.com>
When the driver starts to send a message with the MASTER_ID field
set (high speed), the whole I2C_ADDR register is overwritten including
MASTER_ID as the SLV_ADDR_MAS field is set.
This patch preserves already written fields in I2C_ADDR when writing
SLV_ADDR_MAS.
Signed-off-by: Mårten Lindahl <martenli@axis.com>
---
v2:
- Change commit message as the problem is not in the controller but in
the driver.
- Use MASTER_ID macro instead of reading back register contents.
drivers/i2c/busses/i2c-exynos5.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 20a9881a0d6c..5ac30d95650c 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -606,6 +606,7 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
u32 i2c_ctl;
u32 int_en = 0;
u32 i2c_auto_conf = 0;
+ u32 i2c_addr = 0;
u32 fifo_ctl;
unsigned long flags;
unsigned short trig_lvl;
@@ -640,7 +641,12 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
int_en |= HSI2C_INT_TX_ALMOSTEMPTY_EN;
}
- writel(HSI2C_SLV_ADDR_MAS(i2c->msg->addr), i2c->regs + HSI2C_ADDR);
+ i2c_addr = HSI2C_SLV_ADDR_MAS(i2c->msg->addr);
+
+ if (i2c->op_clock >= I2C_MAX_FAST_MODE_PLUS_FREQ)
+ i2c_addr |= HSI2C_MASTER_ID(MASTER_ID(i2c->adap.nr));
+
+ writel(i2c_addr, i2c->regs + HSI2C_ADDR);
writel(fifo_ctl, i2c->regs + HSI2C_FIFO_CTL);
writel(i2c_ctl, i2c->regs + HSI2C_CTL);
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2] i2c: exynos5: Preserve high speed master code
2021-02-16 22:25 [PATCH v2] i2c: exynos5: Preserve high speed master code Mårten Lindahl
@ 2021-02-17 8:35 ` Krzysztof Kozlowski
2021-02-26 10:34 ` Wolfram Sang
1 sibling, 0 replies; 5+ messages in thread
From: Krzysztof Kozlowski @ 2021-02-17 8:35 UTC (permalink / raw)
To: Mårten Lindahl
Cc: linux-samsung-soc, linux-kernel, Mårten Lindahl, kernel,
linux-i2c, linux-arm-kernel
On Tue, Feb 16, 2021 at 11:25:38PM +0100, Mårten Lindahl wrote:
> From: Mårten Lindahl <martenli@axis.com>
>
> When the driver starts to send a message with the MASTER_ID field
> set (high speed), the whole I2C_ADDR register is overwritten including
> MASTER_ID as the SLV_ADDR_MAS field is set.
>
> This patch preserves already written fields in I2C_ADDR when writing
> SLV_ADDR_MAS.
>
> Signed-off-by: Mårten Lindahl <martenli@axis.com>
> ---
> v2:
> - Change commit message as the problem is not in the controller but in
> the driver.
> - Use MASTER_ID macro instead of reading back register contents.
>
> drivers/i2c/busses/i2c-exynos5.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] i2c: exynos5: Preserve high speed master code
2021-02-16 22:25 [PATCH v2] i2c: exynos5: Preserve high speed master code Mårten Lindahl
2021-02-17 8:35 ` Krzysztof Kozlowski
@ 2021-02-26 10:34 ` Wolfram Sang
2021-02-26 10:40 ` Krzysztof Kozlowski
1 sibling, 1 reply; 5+ messages in thread
From: Wolfram Sang @ 2021-02-26 10:34 UTC (permalink / raw)
To: Mårten Lindahl
Cc: linux-samsung-soc, linux-kernel, Krzysztof Kozlowski,
Mårten Lindahl, kernel, linux-i2c, linux-arm-kernel
[-- Attachment #1.1: Type: text/plain, Size: 510 bytes --]
On Tue, Feb 16, 2021 at 11:25:38PM +0100, Mårten Lindahl wrote:
> From: Mårten Lindahl <martenli@axis.com>
>
> When the driver starts to send a message with the MASTER_ID field
> set (high speed), the whole I2C_ADDR register is overwritten including
> MASTER_ID as the SLV_ADDR_MAS field is set.
>
> This patch preserves already written fields in I2C_ADDR when writing
> SLV_ADDR_MAS.
>
> Signed-off-by: Mårten Lindahl <martenli@axis.com>
Looks good. Is there a Fixes-tag we could apply?
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] i2c: exynos5: Preserve high speed master code
2021-02-26 10:34 ` Wolfram Sang
@ 2021-02-26 10:40 ` Krzysztof Kozlowski
2021-02-26 10:48 ` Wolfram Sang
0 siblings, 1 reply; 5+ messages in thread
From: Krzysztof Kozlowski @ 2021-02-26 10:40 UTC (permalink / raw)
To: Wolfram Sang
Cc: linux-samsung-soc, Mårten Lindahl, linux-kernel,
Mårten Lindahl, kernel, linux-i2c, linux-arm-kernel
On Fri, 26 Feb 2021 at 11:34, Wolfram Sang <wsa@kernel.org> wrote:
>
> On Tue, Feb 16, 2021 at 11:25:38PM +0100, Mårten Lindahl wrote:
> > From: Mårten Lindahl <martenli@axis.com>
> >
> > When the driver starts to send a message with the MASTER_ID field
> > set (high speed), the whole I2C_ADDR register is overwritten including
> > MASTER_ID as the SLV_ADDR_MAS field is set.
> >
> > This patch preserves already written fields in I2C_ADDR when writing
> > SLV_ADDR_MAS.
> >
> > Signed-off-by: Mårten Lindahl <martenli@axis.com>
>
> Looks good. Is there a Fixes-tag we could apply?
The first commit, 2013 :)
Fixes: 8a73cd4cfa15 ("i2c: exynos5: add High Speed I2C controller driver")
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] i2c: exynos5: Preserve high speed master code
2021-02-26 10:40 ` Krzysztof Kozlowski
@ 2021-02-26 10:48 ` Wolfram Sang
0 siblings, 0 replies; 5+ messages in thread
From: Wolfram Sang @ 2021-02-26 10:48 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: linux-samsung-soc, Mårten Lindahl, linux-kernel,
Mårten Lindahl, kernel, linux-i2c, linux-arm-kernel
[-- Attachment #1.1: Type: text/plain, Size: 849 bytes --]
On Fri, Feb 26, 2021 at 11:40:00AM +0100, Krzysztof Kozlowski wrote:
> On Fri, 26 Feb 2021 at 11:34, Wolfram Sang <wsa@kernel.org> wrote:
> >
> > On Tue, Feb 16, 2021 at 11:25:38PM +0100, Mårten Lindahl wrote:
> > > From: Mårten Lindahl <martenli@axis.com>
> > >
> > > When the driver starts to send a message with the MASTER_ID field
> > > set (high speed), the whole I2C_ADDR register is overwritten including
> > > MASTER_ID as the SLV_ADDR_MAS field is set.
> > >
> > > This patch preserves already written fields in I2C_ADDR when writing
> > > SLV_ADDR_MAS.
> > >
> > > Signed-off-by: Mårten Lindahl <martenli@axis.com>
> >
> > Looks good. Is there a Fixes-tag we could apply?
>
> The first commit, 2013 :)
> Fixes: 8a73cd4cfa15 ("i2c: exynos5: add High Speed I2C controller driver")
Thanks! Applied to for-current.
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-02-26 10:49 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-16 22:25 [PATCH v2] i2c: exynos5: Preserve high speed master code Mårten Lindahl
2021-02-17 8:35 ` Krzysztof Kozlowski
2021-02-26 10:34 ` Wolfram Sang
2021-02-26 10:40 ` Krzysztof Kozlowski
2021-02-26 10:48 ` Wolfram Sang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).