[PATCH] ARM: defconfig: gemini: Update defconfig

[PATCH] ARM: defconfig: gemini: Update defconfig

[Linus Walleij]

Update the Gemini defconfig: some moved options, added som
WLAN drivers existing on the supported platforms and enabled
the drivetemp sensor which is used on the NAS devices.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ARM SoC folks: apply this wherever defconfigs go.
---
 arch/arm/configs/gemini_defconfig | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/arch/arm/configs/gemini_defconfig b/arch/arm/configs/gemini_defconfig
index d2d5f1cf815f..4d5409689e68 100644
--- a/arch/arm/configs/gemini_defconfig
+++ b/arch/arm/configs/gemini_defconfig
@@ -16,6 +16,7 @@ CONFIG_CMDLINE="console=ttyS0,115200n8"
 CONFIG_KEXEC=y
 CONFIG_PM=y
 CONFIG_PARTITION_ADVANCED=y
+CONFIG_IOSCHED_BFQ=y
 CONFIG_BINFMT_MISC=y
 CONFIG_CMA=y
 CONFIG_NET=y
@@ -51,9 +52,27 @@ CONFIG_NETDEVICES=y
 CONFIG_TUN=y
 CONFIG_NET_DSA_REALTEK_SMI=y
 CONFIG_GEMINI_ETHERNET=y
+CONFIG_MARVELL_PHY=y
 CONFIG_MDIO_BITBANG=y
 CONFIG_MDIO_GPIO=y
-CONFIG_MARVELL_PHY=y
+# CONFIG_USB_NET_DRIVERS is not set
+# CONFIG_WLAN_VENDOR_ADMTEK is not set
+# CONFIG_WLAN_VENDOR_ATH is not set
+# CONFIG_WLAN_VENDOR_ATMEL is not set
+# CONFIG_WLAN_VENDOR_BROADCOM is not set
+# CONFIG_WLAN_VENDOR_CISCO is not set
+# CONFIG_WLAN_VENDOR_INTEL is not set
+# CONFIG_WLAN_VENDOR_INTERSIL is not set
+# CONFIG_WLAN_VENDOR_MARVELL is not set
+# CONFIG_WLAN_VENDOR_MEDIATEK is not set
+CONFIG_RT2X00=y
+CONFIG_RT61PCI=y
+CONFIG_RT2800PCI=y
+# CONFIG_WLAN_VENDOR_REALTEK is not set
+# CONFIG_WLAN_VENDOR_RSI is not set
+# CONFIG_WLAN_VENDOR_ST is not set
+# CONFIG_WLAN_VENDOR_TI is not set
+# CONFIG_WLAN_VENDOR_ZYDAS is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
@@ -67,6 +86,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=y
+CONFIG_SENSORS_DRIVETEMP=y
 CONFIG_SENSORS_GPIO_FAN=y
 CONFIG_SENSORS_LM75=y
 CONFIG_THERMAL=y
@@ -98,5 +118,4 @@ CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_ROMFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_FS=y
-- 
2.29.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] ARM: defconfig: gemini: Update defconfig

[Arnd Bergmann]

On Mon, Apr 12, 2021 at 3:47 PM Linus Walleij <linus.walleij@linaro.org> wrote:
>
> Update the Gemini defconfig: some moved options, added som
> WLAN drivers existing on the supported platforms and enabled
> the drivetemp sensor which is used on the NAS devices.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

I don't like patches that mix functional changes with what comes down
to whitespace. Can you resend this one as a series?

At the minimum, make one patch that adds BFQ, DRIVETEMP
and WLAN changes and another one that moves options
around that change after 'savedefconfig'.

For the CONFIG_ENABLE_MUST_CHECK removal, can you
send a patch that removes this line from all defconfig files at once?

      Arnd

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH] ARM: defconfig: gemini: Update defconfig

[Linus Walleij]

This updates the gemini defconfig with Kconfig shuffling and
some of the features activated in new upstream drivers and newly
supported devices:

- Move some symbols around due to Kconfig alterations,
  this affects CONFIG_PREEMPT, CONFIG_PCI, CONFIG_CMA,
  CONFIG_BINFMT_MISC, CONFIG_PARTITION_ADVANCED.
- Add RedBoot partition parsing, as all the Gemini
  devices use some RedBoot derivative and store their
  flash partition tables in this format.
- Enable bridge and VLAN filtering: a majority of the
  Gemini devices have some kind of DSA chip for ethernet
  bridging/routing.
- Enable CONFIG_NET_DSA_REALTEK_SMI as this DSA router
  chip is found in the Gemini-based products. This makes
  explicit selection of CONFIG_REALTEK_PHY unnecessary
  so that goes away.
- Enable CONFIG_TUN since Gemini userspace often make
  use of the TUN interface for network services.
- Enable MARVELL_PHY as Marvell PHY connectors are often
  found in Gemini systems.
- Enable basic 802.11 libraries as many Gemini systems
  have wireless PCI cards.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ARM/SoC folks: please apply this on wherever ARM defconfig
patches goes.
---
 arch/arm/configs/gemini_defconfig | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/arch/arm/configs/gemini_defconfig b/arch/arm/configs/gemini_defconfig
index f012e81a2fe4..d2d5f1cf815f 100644
--- a/arch/arm/configs/gemini_defconfig
+++ b/arch/arm/configs/gemini_defconfig
@@ -2,28 +2,36 @@
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_USER_NS=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_MULTI_V4=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_GEMINI=y
-CONFIG_PCI=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_CMA=y
 CONFIG_CMDLINE="console=ttyS0,115200n8"
 CONFIG_KEXEC=y
-CONFIG_BINFMT_MISC=y
 CONFIG_PM=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BINFMT_MISC=y
+CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
+CONFIG_BRIDGE=y
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_NET_DSA=y
+CONFIG_VLAN_8021Q=y
+CONFIG_CFG80211=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=y
+CONFIG_PCI=y
 CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
+CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
@@ -40,10 +48,12 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_PATA_FTIDE010=y
 CONFIG_NETDEVICES=y
+CONFIG_TUN=y
+CONFIG_NET_DSA_REALTEK_SMI=y
 CONFIG_GEMINI_ETHERNET=y
 CONFIG_MDIO_BITBANG=y
 CONFIG_MDIO_GPIO=y
-CONFIG_REALTEK_PHY=y
+CONFIG_MARVELL_PHY=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
@@ -69,7 +79,9 @@ CONFIG_DRM_TVE200=y
 CONFIG_LOGO=y
 CONFIG_USB=y
 CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_FOTG210_HCD=y
+CONFIG_USB_UHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel