* [PATCH v3] phy: rockchip-inno-usb2: Return zero after otg sync
@ 2022-08-24 12:25 Peter Geis
2022-09-02 17:35 ` Vinod Koul
0 siblings, 1 reply; 3+ messages in thread
From: Peter Geis @ 2022-08-24 12:25 UTC (permalink / raw)
To: Heiko Stuebner, Kishon Vijay Abraham I, Vinod Koul, Peter Geis,
Samuel Holland
Cc: Markus Reichl, Michael Riesch, linux-phy, linux-arm-kernel,
linux-rockchip, linux-kernel
The otg sync state patch reuses the ret variable, but fails to set it to
zero after use. This leads to a situation when the otg port is in
peripheral mode where the otg phy aborts halfway through setup. It also
fails to account for a failure to register the extcon notifier. Fix this
by using our own variable and skipping otg sync in case of failure.
Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state")
Reported-by: Markus Reichl <m.reichl@fivetechno.de>
Reported-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
---
Changelog:
v3
- add missing brackets around new goto
v2
- switch to using our own variable
- add missing goto to skip sync in case of registration failure
---
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 0b1e9337ee8e..27da5ba379c4 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1124,7 +1124,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
struct rockchip_usb2phy_port *rport,
struct device_node *child_np)
{
- int ret;
+ int ret, id;
rport->port_id = USB2PHY_PORT_OTG;
rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG];
@@ -1163,12 +1163,15 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
ret = devm_extcon_register_notifier(rphy->dev, rphy->edev,
EXTCON_USB_HOST, &rport->event_nb);
if (ret)
+ {
dev_err(rphy->dev, "register USB HOST notifier failed\n");
+ goto out;
+ }
if (!of_property_read_bool(rphy->dev->of_node, "extcon")) {
/* do initial sync of usb state */
- ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
- extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret);
+ id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
+ extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id);
}
}
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v3] phy: rockchip-inno-usb2: Return zero after otg sync
2022-08-24 12:25 [PATCH v3] phy: rockchip-inno-usb2: Return zero after otg sync Peter Geis
@ 2022-09-02 17:35 ` Vinod Koul
2022-09-02 18:29 ` Peter Geis
0 siblings, 1 reply; 3+ messages in thread
From: Vinod Koul @ 2022-09-02 17:35 UTC (permalink / raw)
To: Peter Geis
Cc: Heiko Stuebner, Kishon Vijay Abraham I, Samuel Holland,
Markus Reichl, Michael Riesch, linux-phy, linux-arm-kernel,
linux-rockchip, linux-kernel
On 24-08-22, 08:25, Peter Geis wrote:
> The otg sync state patch reuses the ret variable, but fails to set it to
> zero after use. This leads to a situation when the otg port is in
> peripheral mode where the otg phy aborts halfway through setup. It also
> fails to account for a failure to register the extcon notifier. Fix this
> by using our own variable and skipping otg sync in case of failure.
>
> Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state")
>
No blank here please
> Reported-by: Markus Reichl <m.reichl@fivetechno.de>
> Reported-by: Michael Riesch <michael.riesch@wolfvision.net>
> Signed-off-by: Peter Geis <pgwipeout@gmail.com>
> Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
> Tested-by: Markus Reichl <m.reichl@fivetechno.de>
> ---
> Changelog:
> v3
> - add missing brackets around new goto
> v2
> - switch to using our own variable
> - add missing goto to skip sync in case of registration failure
> ---
> drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 9 ++++++---
> 1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> index 0b1e9337ee8e..27da5ba379c4 100644
> --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> @@ -1124,7 +1124,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
> struct rockchip_usb2phy_port *rport,
> struct device_node *child_np)
> {
> - int ret;
> + int ret, id;
>
> rport->port_id = USB2PHY_PORT_OTG;
> rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG];
> @@ -1163,12 +1163,15 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
> ret = devm_extcon_register_notifier(rphy->dev, rphy->edev,
> EXTCON_USB_HOST, &rport->event_nb);
> if (ret)
> + {
:-(
this is _not_ linux kernel code style!
Reminder: it always helps to run checkpatch
> dev_err(rphy->dev, "register USB HOST notifier failed\n");
> + goto out;
> + }
>
> if (!of_property_read_bool(rphy->dev->of_node, "extcon")) {
> /* do initial sync of usb state */
> - ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
> - extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret);
> + id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
> + extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id);
> }
> }
>
> --
> 2.25.1
--
~Vinod
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v3] phy: rockchip-inno-usb2: Return zero after otg sync
2022-09-02 17:35 ` Vinod Koul
@ 2022-09-02 18:29 ` Peter Geis
0 siblings, 0 replies; 3+ messages in thread
From: Peter Geis @ 2022-09-02 18:29 UTC (permalink / raw)
To: Vinod Koul
Cc: Heiko Stuebner, Kishon Vijay Abraham I, Samuel Holland,
Markus Reichl, Michael Riesch, open list:GENERIC PHY FRAMEWORK,
arm-mail-list, open list:ARM/Rockchip SoC...,
Linux Kernel Mailing List
On Fri, Sep 2, 2022 at 1:35 PM Vinod Koul <vkoul@kernel.org> wrote:
>
> On 24-08-22, 08:25, Peter Geis wrote:
> > The otg sync state patch reuses the ret variable, but fails to set it to
> > zero after use. This leads to a situation when the otg port is in
> > peripheral mode where the otg phy aborts halfway through setup. It also
> > fails to account for a failure to register the extcon notifier. Fix this
> > by using our own variable and skipping otg sync in case of failure.
> >
> > Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state")
> >
>
> No blank here please
>
> > Reported-by: Markus Reichl <m.reichl@fivetechno.de>
> > Reported-by: Michael Riesch <michael.riesch@wolfvision.net>
> > Signed-off-by: Peter Geis <pgwipeout@gmail.com>
> > Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
> > Tested-by: Markus Reichl <m.reichl@fivetechno.de>
> > ---
> > Changelog:
> > v3
> > - add missing brackets around new goto
> > v2
> > - switch to using our own variable
> > - add missing goto to skip sync in case of registration failure
> > ---
> > drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 9 ++++++---
> > 1 file changed, 6 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> > index 0b1e9337ee8e..27da5ba379c4 100644
> > --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> > +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> > @@ -1124,7 +1124,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
> > struct rockchip_usb2phy_port *rport,
> > struct device_node *child_np)
> > {
> > - int ret;
> > + int ret, id;
> >
> > rport->port_id = USB2PHY_PORT_OTG;
> > rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG];
> > @@ -1163,12 +1163,15 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
> > ret = devm_extcon_register_notifier(rphy->dev, rphy->edev,
> > EXTCON_USB_HOST, &rport->event_nb);
> > if (ret)
> > + {
>
> :-(
>
> this is _not_ linux kernel code style!
>
> Reminder: it always helps to run checkpatch
Ouch, yeah that's really embarrassing. Thank you for catching it.
>
> > dev_err(rphy->dev, "register USB HOST notifier failed\n");
> > + goto out;
> > + }
> >
> > if (!of_property_read_bool(rphy->dev->of_node, "extcon")) {
> > /* do initial sync of usb state */
> > - ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
> > - extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret);
> > + id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
> > + extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id);
> > }
> > }
> >
> > --
> > 2.25.1
>
> --
> ~Vinod
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-09-02 18:30 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-08-24 12:25 [PATCH v3] phy: rockchip-inno-usb2: Return zero after otg sync Peter Geis
2022-09-02 17:35 ` Vinod Koul
2022-09-02 18:29 ` Peter Geis
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).