From: geert@linux-m68k.org (Geert Uytterhoeven)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 01/26] ARM: shmobile: Add watchdog support
Date: Tue, 13 Mar 2018 14:43:52 +0100 [thread overview]
Message-ID: <CAMuHMdVRxTCG0vCEEmhHm4XsZeJaPM1b_LOeZxqNdhRqsH0oZw@mail.gmail.com> (raw)
In-Reply-To: <1519839622-6109-1-git-send-email-fabrizio.castro@bp.renesas.com>
Hi Fabrizio,
On Wed, Feb 28, 2018 at 6:40 PM, Fabrizio Castro
<fabrizio.castro@bp.renesas.com> wrote:
> On R-Car Gen2 and RZ/G1 platforms, we use the SBAR registers to make non
> boot CPUs run a routine designed to bring up SMP and deal with hot plug.
> The value contained in the SBAR registers is not initialized by a WDT
> triggered reset, which means that after a WDT triggered reset we jump
> to the SMP bring up routine, preventing the system from executing the
> bootrom code.
>
> The purpose of this patch is to jump to the bootrom code in case of a
> WDT triggered reset, and keep the SMP functionality untouched.
> In order to tell if the code had been called due to the WDT overflowing
> we are testing WOVF from register RWTCSRA.
>
> The new function shmobile_boot_vector_gen2 isn't replacing
> shmobile_boot_vector for backward compatibility reasons. The kernel
> will install the best option (either shmobile_boot_vector or
> shmobile_boot_vector_gen2) to ICRAM1 after parsing the device tree,
> according to the amount of memory available.
>
> Since shmobile_boot_vector has become bigger, "reg" property of nodes
> compatible with "renesas,smp-sram" now need to be set to a value
> greater or equal to "<0 0x60>".
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> v5->v6:
> * taken ifdefs out as per Geert's suggestion.
My intention was to remove the #ifdefs from the header file only, not
from arch/arm/mach-shmobile/headsmp.S, as the latter is used for
other SoC families, too.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
next prev parent reply other threads:[~2018-03-13 13:43 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-12 17:44 [PATCH v5 00/26] Fix watchdog on Renesas R-Car Gen2 and RZ/G1 Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 01/26] ARM: shmobile: Add watchdog support Fabrizio Castro
2018-02-28 12:57 ` Geert Uytterhoeven
2018-02-28 17:37 ` Fabrizio Castro
2018-02-28 17:40 ` [PATCH v6 " Fabrizio Castro
2018-03-01 9:44 ` Simon Horman
2018-03-13 13:43 ` Geert Uytterhoeven [this message]
2018-03-14 11:02 ` Fabrizio Castro
2018-03-14 11:13 ` [PATCH v7] " Fabrizio Castro
2018-03-14 12:43 ` Simon Horman
2018-03-14 13:26 ` Fabrizio Castro
2018-03-16 11:49 ` Simon Horman
2018-02-12 17:44 ` [PATCH v5 02/26] ARM: dts: r8a7743: Adjust SMP routine size Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 03/26] ARM: dts: r8a7745: " Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 04/26] ARM: dts: r8a7790: " Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 05/26] ARM: dts: r8a7791: " Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 06/26] ARM: dts: r8a7792: " Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 07/26] ARM: dts: r8a7793: " Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 08/26] ARM: dts: r8a7794: " Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 09/26] soc: renesas: rcar-rst: Enable watchdog as reset trigger for Gen2 Fabrizio Castro
2018-02-13 8:19 ` Simon Horman
2018-02-13 12:57 ` Fabrizio Castro
2018-02-13 13:02 ` [PATCH v6 " Fabrizio Castro
2018-02-15 16:20 ` Simon Horman
2018-02-12 17:44 ` [PATCH v5 10/26] ARM: shmobile: rcar-gen2: Add watchdog support Fabrizio Castro
2018-02-13 8:21 ` Simon Horman
2018-02-12 17:44 ` [PATCH v5 11/26] dt-bindings: watchdog: renesas-wdt: Add R-Car Gen2 support Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 12/26] watchdog: renesas_wdt: " Fabrizio Castro
2018-02-12 19:24 ` Guenter Roeck
2018-02-12 20:58 ` Wolfram Sang
2018-02-28 19:24 ` Geert Uytterhoeven
2018-03-01 15:34 ` Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 13/26] watchdog: renesas_wdt: Add restart handler Fabrizio Castro
2018-02-12 20:59 ` Wolfram Sang
2018-02-12 17:44 ` [PATCH v5 14/26] ARM: shmobile: defconfig: Enable RENESAS_WDT_GEN Fabrizio Castro
2018-02-13 13:08 ` Fabrizio Castro
2018-02-15 16:20 ` Simon Horman
2018-05-02 9:38 ` Simon Horman
2018-02-12 17:44 ` [PATCH v5 15/26] clk: renesas: r8a7743: Add rwdt clock Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 16/26] clk: renesas: r8a7745: " Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 17/26] clk: renesas: r8a7790: " Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 18/26] clk: renesas: r8a7791/r8a7793: " Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 19/26] clk: renesas: r8a7794: " Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 20/26] ARM: dts: r8a7743: Add watchdog support to SoC dtsi Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 21/26] ARM: dts: r8a7745: " Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 22/26] ARM: dts: r8a7790: " Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 23/26] ARM: dts: r8a7791: " Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 24/26] ARM: dts: r8a7794: " Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 25/26] ARM: dts: iwg20m: Add watchdog support to SoM dtsi Fabrizio Castro
2018-02-12 17:44 ` [PATCH v5 26/26] ARM: dts: iwg22m: " Fabrizio Castro
2018-02-13 8:05 ` [PATCH v5 00/26] Fix watchdog on Renesas R-Car Gen2 and RZ/G1 Simon Horman
2018-02-20 12:51 ` Geert Uytterhoeven
2018-02-21 16:13 ` Simon Horman
2018-02-21 16:30 ` Geert Uytterhoeven
2018-02-21 18:32 ` Simon Horman
2018-02-22 8:38 ` Geert Uytterhoeven
2018-02-23 8:14 ` Simon Horman
2018-03-01 10:20 ` Geert Uytterhoeven
2018-03-13 20:05 ` Simon Horman
2018-03-14 8:17 ` Geert Uytterhoeven
2018-04-18 13:37 ` Geert Uytterhoeven
2018-04-24 9:09 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAMuHMdVRxTCG0vCEEmhHm4XsZeJaPM1b_LOeZxqNdhRqsH0oZw@mail.gmail.com \
--to=geert@linux-m68k.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).