* [PATCH] ARM: dts: imx6qdl-udoo: Add Pincfgs for UART4
[not found] <1538663639-3427-1-git-send-email-kueffner.markus@gmail.com>
@ 2018-10-08 6:05 ` Shawn Guo
2018-10-10 21:57 ` Maciej S. Szmigiero
2018-10-08 20:51 ` Fabio Estevam
1 sibling, 1 reply; 6+ messages in thread
From: Shawn Guo @ 2018-10-08 6:05 UTC (permalink / raw)
To: linux-arm-kernel
Add a few udoo board users for comment.
On Thu, Oct 04, 2018 at 04:33:59PM +0200, Markus Kueffner wrote:
> From: Markus Kueffner <kueffner.markus@gmail.com>
>
> Add Pincfgs for UART4 to enable Communication with the onboard SAM3X
>
> Signed-off-by: Markus Kueffner <kueffner.markus@gmail.com>
> ---
> arch/arm/boot/dts/imx6qdl-udoo.dtsi | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> index 4f27861..5614170 100644
> --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> @@ -195,6 +195,13 @@
> >;
> };
>
> + pinctrl_uart4: uart4grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
> + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
> + >;
> + };
> +
> pinctrl_usbh: usbhgrp {
> fsl,pins = <
> MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
> @@ -265,6 +272,12 @@
> status = "okay";
> };
>
> +&uart4 { // iMX6-Arduino internal serial port - ttymxc3
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart4>;
> + status = "okay";
> +};
> +
> &usbh1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usbh>;
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: dts: imx6qdl-udoo: Add Pincfgs for UART4
[not found] <1538663639-3427-1-git-send-email-kueffner.markus@gmail.com>
2018-10-08 6:05 ` [PATCH] ARM: dts: imx6qdl-udoo: Add Pincfgs for UART4 Shawn Guo
@ 2018-10-08 20:51 ` Fabio Estevam
2018-10-10 8:19 ` Markus Kueffner
1 sibling, 1 reply; 6+ messages in thread
From: Fabio Estevam @ 2018-10-08 20:51 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Oct 4, 2018 at 11:35 AM Markus Kueffner
<kueffner.markus@gmail.com> wrote:
>
> From: Markus Kueffner <kueffner.markus@gmail.com>
>
> Add Pincfgs for UART4 to enable Communication with the onboard SAM3X
>
> Signed-off-by: Markus Kueffner <kueffner.markus@gmail.com>
Looks good as per the schematics:
Reviewed-by: Fabio Estevam <festevam@gmail.com>
> +&uart4 { // iMX6-Arduino internal serial port - ttymxc3
Minor nit: // style comment should be avoided.
Actually the whole comment could de dropped IMHO.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: dts: imx6qdl-udoo: Add Pincfgs for UART4
2018-10-08 20:51 ` Fabio Estevam
@ 2018-10-10 8:19 ` Markus Kueffner
2018-10-10 22:20 ` Fabio Estevam
2018-10-11 13:12 ` Shawn Guo
0 siblings, 2 replies; 6+ messages in thread
From: Markus Kueffner @ 2018-10-10 8:19 UTC (permalink / raw)
To: linux-arm-kernel
>From b25738867245688e0a1eafeb78379efc6a73b66e Mon Sep 17 00:00:00 2001
From: Markus Kueffner <kueffner.markus@gmail.com>
Date: Wed, 10 Oct 2018 08:32:09 +0200
Subject: [PATCH v2] ARM: dts: imx6qdl-udoo: Add Pincfgs for UART4
Add Pincfgs for UART4 to enable Communication with the onboard SAM3X
Signed-off-by: Markus Kueffner <kueffner.markus@gmail.com>
---
Changes in v2:
- Removed // style Comment.
arch/arm/boot/dts/imx6qdl-udoo.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index 4f27861..40d1b0d 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -195,6 +195,13 @@
>;
};
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
pinctrl_usbh: usbhgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
@@ -265,6 +272,12 @@
status = "okay";
};
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
&usbh1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh>;
--
2.1.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] ARM: dts: imx6qdl-udoo: Add Pincfgs for UART4
2018-10-08 6:05 ` [PATCH] ARM: dts: imx6qdl-udoo: Add Pincfgs for UART4 Shawn Guo
@ 2018-10-10 21:57 ` Maciej S. Szmigiero
0 siblings, 0 replies; 6+ messages in thread
From: Maciej S. Szmigiero @ 2018-10-10 21:57 UTC (permalink / raw)
To: linux-arm-kernel
On 08.10.2018 08:05, Shawn Guo wrote:
> Add a few udoo board users for comment.
>
> On Thu, Oct 04, 2018 at 04:33:59PM +0200, Markus Kueffner wrote:
>> From: Markus Kueffner <kueffner.markus@gmail.com>
>>
>> Add Pincfgs for UART4 to enable Communication with the onboard SAM3X
Although I can't test this patch on a real board, verifying it with
UDOO schematic and docs suggests that this change does make sense.
Maciej
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: dts: imx6qdl-udoo: Add Pincfgs for UART4
2018-10-10 8:19 ` Markus Kueffner
@ 2018-10-10 22:20 ` Fabio Estevam
2018-10-11 13:12 ` Shawn Guo
1 sibling, 0 replies; 6+ messages in thread
From: Fabio Estevam @ 2018-10-10 22:20 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Oct 10, 2018 at 5:19 AM Markus Kueffner
<kueffner.markus@gmail.com> wrote:
>
> From b25738867245688e0a1eafeb78379efc6a73b66e Mon Sep 17 00:00:00 2001
> From: Markus Kueffner <kueffner.markus@gmail.com>
> Date: Wed, 10 Oct 2018 08:32:09 +0200
> Subject: [PATCH v2] ARM: dts: imx6qdl-udoo: Add Pincfgs for UART4
>
> Add Pincfgs for UART4 to enable Communication with the onboard SAM3X
>
> Signed-off-by: Markus Kueffner <kueffner.markus@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: dts: imx6qdl-udoo: Add Pincfgs for UART4
2018-10-10 8:19 ` Markus Kueffner
2018-10-10 22:20 ` Fabio Estevam
@ 2018-10-11 13:12 ` Shawn Guo
1 sibling, 0 replies; 6+ messages in thread
From: Shawn Guo @ 2018-10-11 13:12 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Oct 10, 2018 at 10:19:04AM +0200, Markus Kueffner wrote:
> From: Markus Kueffner <kueffner.markus@gmail.com>
> Date: Wed, 10 Oct 2018 08:32:09 +0200
> Subject: [PATCH v2] ARM: dts: imx6qdl-udoo: Add Pincfgs for UART4
>
> Add Pincfgs for UART4 to enable Communication with the onboard SAM3X
>
> Signed-off-by: Markus Kueffner <kueffner.markus@gmail.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-10-11 13:12 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1538663639-3427-1-git-send-email-kueffner.markus@gmail.com>
2018-10-08 6:05 ` [PATCH] ARM: dts: imx6qdl-udoo: Add Pincfgs for UART4 Shawn Guo
2018-10-10 21:57 ` Maciej S. Szmigiero
2018-10-08 20:51 ` Fabio Estevam
2018-10-10 8:19 ` Markus Kueffner
2018-10-10 22:20 ` Fabio Estevam
2018-10-11 13:12 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).