[PATCH 0/7] drm/mediatek: cleaning up and refine

[PATCH 0/7] drm/mediatek: cleaning up and refine

[Bibby Hsieh]

These patches based on 4.7-rc1 to clean up unused function & variable
and use drm core function instead.

The following patches are needed to cleanly apply on top of v4.7-rc1:
 - https://patchwork.kernel.org/patch/8044001/
   (drm: Deal with rotation in drm_plane_helper_check_update())
 - https://patchwork.kernel.org/patch/9248373/
   (drm: Warn about negative sizes when calculating scale factor)
 - https://patchwork.kernel.org/patch/9248371/
   (drm: Store clipped src/dst coordinatee in drm_plane_state)
 - https://patchwork.kernel.org/patch/9248363/
   (drm/plane-helper: Add drm_plane_helper_check_state())
 - https://patchwork.kernel.org/patch/9248361/
   (drm/mediatek: Use drm_plane_helper_check_state())

Bibby Hsieh (2):
  drm/mediatek: Use drm_atomic destroy_state helpers
  drm/mediatek: Fix mtk_atomic_complete for runtime_pm

Daniel Kurtz (5):
  drm/mediatek: Remove mtk_drm_crtc_check_flush
  drm/mediatek: plane: Remove plane zpos/index
  drm/mediatek: Remove mtk_drm_plane
  drm/mediatek: plane: Merge mtk_plane_enable into
    mtk_plane_atomic_update
  drm/mediatek: plane: Use FB's format's cpp to compute x offset

 drivers/gpu/drm/mediatek/mtk_drm_crtc.c  |   21 ++++----
 drivers/gpu/drm/mediatek/mtk_drm_crtc.h  |    1 -
 drivers/gpu/drm/mediatek/mtk_drm_drv.c   |   17 ++++++-
 drivers/gpu/drm/mediatek/mtk_drm_plane.c |   80 +++++++++++-------------------
 drivers/gpu/drm/mediatek/mtk_drm_plane.h |   15 +-----
 5 files changed, 56 insertions(+), 78 deletions(-)

-- 
1.7.9.5

[PATCH 1/7] drm/mediatek: Remove mtk_drm_crtc_check_flush

[Bibby Hsieh]

From: Daniel Kurtz <djkurtz@chromium.org>

This function no longer exists.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.h |    1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
index 81e5566..4d32cf1 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
@@ -22,7 +22,6 @@
 
 int mtk_drm_crtc_enable_vblank(struct drm_device *drm, unsigned int pipe);
 void mtk_drm_crtc_disable_vblank(struct drm_device *drm, unsigned int pipe);
-void mtk_drm_crtc_check_flush(struct drm_crtc *crtc);
 void mtk_drm_crtc_commit(struct drm_crtc *crtc);
 void mtk_crtc_ddp_irq(struct drm_crtc *crtc, struct mtk_ddp_comp *ovl);
 int mtk_drm_crtc_create(struct drm_device *drm_dev,
-- 
1.7.9.5

[PATCH 2/7] drm/mediatek: plane: Remove plane zpos/index

[Bibby Hsieh]

From: Daniel Kurtz <djkurtz@chromium.org>

It is not actually useful to a mtk plane to know its zpos/index, so just
remove this field.

This let's us completely remove struct mtk_drm_plane in a follow up patch.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c  |    2 +-
 drivers/gpu/drm/mediatek/mtk_drm_plane.c |    4 +---
 drivers/gpu/drm/mediatek/mtk_drm_plane.h |    4 +---
 3 files changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 24aa3ba..18211ab 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -559,7 +559,7 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
 				(zpos == 1) ? DRM_PLANE_TYPE_CURSOR :
 						DRM_PLANE_TYPE_OVERLAY;
 		ret = mtk_plane_init(drm_dev, &mtk_crtc->planes[zpos],
-				     BIT(pipe), type, zpos);
+				     BIT(pipe), type);
 		if (ret)
 			goto unprepare;
 	}
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
index 093db07..d28db57 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
@@ -189,8 +189,7 @@ static const struct drm_plane_helper_funcs mtk_plane_helper_funcs = {
 };
 
 int mtk_plane_init(struct drm_device *dev, struct mtk_drm_plane *mtk_plane,
-		   unsigned long possible_crtcs, enum drm_plane_type type,
-		   unsigned int zpos)
+		   unsigned long possible_crtcs, enum drm_plane_type type)
 {
 	int err;
 
@@ -203,7 +202,6 @@ int mtk_plane_init(struct drm_device *dev, struct mtk_drm_plane *mtk_plane,
 	}
 
 	drm_plane_helper_add(&mtk_plane->base, &mtk_plane_helper_funcs);
-	mtk_plane->idx = zpos;
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.h b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
index 72a7b3e..74dbeda 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
@@ -20,7 +20,6 @@
 
 struct mtk_drm_plane {
 	struct drm_plane		base;
-	unsigned int			idx;
 };
 
 struct mtk_plane_pending_state {
@@ -53,7 +52,6 @@ to_mtk_plane_state(struct drm_plane_state *state)
 }
 
 int mtk_plane_init(struct drm_device *dev, struct mtk_drm_plane *mtk_plane,
-		   unsigned long possible_crtcs, enum drm_plane_type type,
-		   unsigned int zpos);
+		   unsigned long possible_crtcs, enum drm_plane_type type);
 
 #endif
-- 
1.7.9.5

[PATCH 3/7] drm/mediatek: Remove mtk_drm_plane

[Bibby Hsieh]

From: Daniel Kurtz <djkurtz@chromium.org>

Now that mtk_drm_plane just contains its base struct drm_plane, we can
just remove it and use struct drm_plane everywhere.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c  |   16 ++++++++--------
 drivers/gpu/drm/mediatek/mtk_drm_plane.c |   10 ++++------
 drivers/gpu/drm/mediatek/mtk_drm_plane.h |   11 +----------
 3 files changed, 13 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 18211ab..d6fbefa 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -31,7 +31,7 @@
  * struct mtk_drm_crtc - MediaTek specific crtc structure.
  * @base: crtc object.
  * @enabled: records whether crtc_enable succeeded
- * @planes: array of 4 mtk_drm_plane structures, one for each overlay plane
+ * @planes: array of 4 drm_plane structures, one for each overlay plane
  * @pending_planes: whether any plane has pending changes to be applied
  * @config_regs: memory mapped mmsys configuration register space
  * @mutex: handle to one of the ten disp_mutex streams
@@ -45,7 +45,7 @@ struct mtk_drm_crtc {
 	bool				pending_needs_vblank;
 	struct drm_pending_vblank_event	*event;
 
-	struct mtk_drm_plane		planes[OVL_LAYER_NR];
+	struct drm_plane		planes[OVL_LAYER_NR];
 	bool				pending_planes;
 
 	void __iomem			*config_regs;
@@ -272,7 +272,7 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
 
 	/* Initially configure all planes */
 	for (i = 0; i < OVL_LAYER_NR; i++) {
-		struct drm_plane *plane = &mtk_crtc->planes[i].base;
+		struct drm_plane *plane = &mtk_crtc->planes[i];
 		struct mtk_plane_state *plane_state;
 
 		plane_state = to_mtk_plane_state(plane->state);
@@ -351,7 +351,7 @@ static void mtk_drm_crtc_disable(struct drm_crtc *crtc)
 
 	/* Set all pending plane state to disabled */
 	for (i = 0; i < OVL_LAYER_NR; i++) {
-		struct drm_plane *plane = &mtk_crtc->planes[i].base;
+		struct drm_plane *plane = &mtk_crtc->planes[i];
 		struct mtk_plane_state *plane_state;
 
 		plane_state = to_mtk_plane_state(plane->state);
@@ -397,7 +397,7 @@ static void mtk_drm_crtc_atomic_flush(struct drm_crtc *crtc,
 	if (mtk_crtc->event)
 		mtk_crtc->pending_needs_vblank = true;
 	for (i = 0; i < OVL_LAYER_NR; i++) {
-		struct drm_plane *plane = &mtk_crtc->planes[i].base;
+		struct drm_plane *plane = &mtk_crtc->planes[i];
 		struct mtk_plane_state *plane_state;
 
 		plane_state = to_mtk_plane_state(plane->state);
@@ -471,7 +471,7 @@ void mtk_crtc_ddp_irq(struct drm_crtc *crtc, struct mtk_ddp_comp *ovl)
 
 	if (mtk_crtc->pending_planes) {
 		for (i = 0; i < OVL_LAYER_NR; i++) {
-			struct drm_plane *plane = &mtk_crtc->planes[i].base;
+			struct drm_plane *plane = &mtk_crtc->planes[i];
 			struct mtk_plane_state *plane_state;
 
 			plane_state = to_mtk_plane_state(plane->state);
@@ -564,8 +564,8 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
 			goto unprepare;
 	}
 
-	ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, &mtk_crtc->planes[0].base,
-				&mtk_crtc->planes[1].base, pipe);
+	ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, &mtk_crtc->planes[0],
+				&mtk_crtc->planes[1], pipe);
 	if (ret < 0)
 		goto unprepare;
 
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
index d28db57..86b7aed 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
@@ -33,7 +33,6 @@ static const u32 formats[] = {
 static void mtk_plane_enable(struct drm_plane *plane,
 			     dma_addr_t addr)
 {
-	struct drm_plane *plane = &mtk_plane->base;
 	struct mtk_plane_state *state = to_mtk_plane_state(plane->state);
 	unsigned int pitch, format;
 	bool enable;
@@ -162,14 +161,13 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
 	struct drm_crtc *crtc = state->base.crtc;
 	struct drm_gem_object *gem;
 	struct mtk_drm_gem_obj *mtk_gem;
-	struct mtk_drm_plane *mtk_plane = to_mtk_plane(plane);
 
 	if (!crtc)
 		return;
 
 	gem = mtk_fb_get_gem_obj(state->base.fb);
 	mtk_gem = to_mtk_gem_obj(gem);
-	mtk_plane_enable(mtk_plane, mtk_gem->dma_addr);
+	mtk_plane_enable(plane, mtk_gem->dma_addr);
 }
 
 static void mtk_plane_atomic_disable(struct drm_plane *plane,
@@ -188,12 +186,12 @@ static const struct drm_plane_helper_funcs mtk_plane_helper_funcs = {
 	.atomic_disable = mtk_plane_atomic_disable,
 };
 
-int mtk_plane_init(struct drm_device *dev, struct mtk_drm_plane *mtk_plane,
+int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
 		   unsigned long possible_crtcs, enum drm_plane_type type)
 {
 	int err;
 
-	err = drm_universal_plane_init(dev, &mtk_plane->base, possible_crtcs,
+	err = drm_universal_plane_init(dev, plane, possible_crtcs,
 				       &mtk_plane_funcs, formats,
 				       ARRAY_SIZE(formats), type, NULL);
 	if (err) {
@@ -201,7 +199,7 @@ int mtk_plane_init(struct drm_device *dev, struct mtk_drm_plane *mtk_plane,
 		return err;
 	}
 
-	drm_plane_helper_add(&mtk_plane->base, &mtk_plane_helper_funcs);
+	drm_plane_helper_add(plane, &mtk_plane_helper_funcs);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.h b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
index 74dbeda..6a20b49 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
@@ -18,10 +18,6 @@
 #include <drm/drm_crtc.h>
 #include <linux/types.h>
 
-struct mtk_drm_plane {
-	struct drm_plane		base;
-};
-
 struct mtk_plane_pending_state {
 	bool				config;
 	bool				enable;
@@ -40,18 +36,13 @@ struct mtk_plane_state {
 	struct mtk_plane_pending_state	pending;
 };
 
-static inline struct mtk_drm_plane *to_mtk_plane(struct drm_plane *plane)
-{
-	return container_of(plane, struct mtk_drm_plane, base);
-}
-
 static inline struct mtk_plane_state *
 to_mtk_plane_state(struct drm_plane_state *state)
 {
 	return container_of(state, struct mtk_plane_state, base);
 }
 
-int mtk_plane_init(struct drm_device *dev, struct mtk_drm_plane *mtk_plane,
+int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
 		   unsigned long possible_crtcs, enum drm_plane_type type);
 
 #endif
-- 
1.7.9.5

[PATCH 4/7] drm/mediatek: Use drm_atomic destroy_state helpers

[Bibby Hsieh]

Use the core destroy_state helpers to destroy core state to ensure we don't
leak if/when more fields get added later.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c  |    3 +--
 drivers/gpu/drm/mediatek/mtk_drm_plane.c |    3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index d6fbefa..733b2a3 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -112,8 +112,7 @@ static void mtk_drm_crtc_reset(struct drm_crtc *crtc)
 	struct mtk_crtc_state *state;
 
 	if (crtc->state) {
-		if (crtc->state->mode_blob)
-			drm_property_unreference_blob(crtc->state->mode_blob);
+		__drm_atomic_helper_crtc_destroy_state(crtc->state);
 
 		state = to_mtk_crtc_state(crtc->state);
 		memset(state, 0, sizeof(*state));
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
index 86b7aed..17172ba 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
@@ -73,8 +73,7 @@ static void mtk_plane_reset(struct drm_plane *plane)
 	struct mtk_plane_state *state;
 
 	if (plane->state) {
-		if (plane->state->fb)
-			drm_framebuffer_unreference(plane->state->fb);
+		__drm_atomic_helper_plane_destroy_state(plane->state);
 
 		state = to_mtk_plane_state(plane->state);
 		memset(state, 0, sizeof(*state));
-- 
1.7.9.5

[PATCH 5/7] drm/mediatek: plane: Merge mtk_plane_enable into mtk_plane_atomic_update

[Bibby Hsieh]

From: Daniel Kurtz <djkurtz@chromium.org>

The mtk_plane_enable is just called once by mtk_plane_atomic_update.
So, merge mtk_plane_enable into mtk_plane_atomic_update.

While we are here, also clean up the function a bit by using an fb local
variables.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_plane.c |   65 +++++++++++-------------------
 1 file changed, 23 insertions(+), 42 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
index 17172ba..b3ddb20 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
@@ -30,44 +30,6 @@ static const u32 formats[] = {
 	DRM_FORMAT_RGB565,
 };
 
-static void mtk_plane_enable(struct drm_plane *plane,
-			     dma_addr_t addr)
-{
-	struct mtk_plane_state *state = to_mtk_plane_state(plane->state);
-	unsigned int pitch, format;
-	bool enable;
-
-	if (WARN_ON(!plane->state))
-		return;
-
-	enable = state->base.visible;
-
-	if (WARN_ON(enable && !plane->state->fb))
-		return;
-
-	if (plane->state->fb) {
-		pitch = plane->state->fb->pitches[0];
-		format = plane->state->fb->pixel_format;
-	} else {
-		pitch = 0;
-		format = DRM_FORMAT_RGBA8888;
-	}
-
-	addr += (state->base.src.x1 >> 16) * 4;
-	addr += (state->base.src.y1 >> 16) * pitch;
-
-	state->pending.enable = enable;
-	state->pending.pitch = pitch;
-	state->pending.format = format;
-	state->pending.addr = addr;
-	state->pending.x = state->base.dst.x1;
-	state->pending.y = state->base.dst.y1;
-	state->pending.width = drm_rect_width(&state->base.dst);
-	state->pending.height = drm_rect_height(&state->base.dst);
-	wmb(); /* Make sure the above parameters are set before update */
-	state->pending.dirty = true;
-}
-
 static void mtk_plane_reset(struct drm_plane *plane)
 {
 	struct mtk_plane_state *state;
@@ -157,16 +119,35 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
 				    struct drm_plane_state *old_state)
 {
 	struct mtk_plane_state *state = to_mtk_plane_state(plane->state);
-	struct drm_crtc *crtc = state->base.crtc;
+	struct drm_crtc *crtc = plane->state->crtc;
+	struct drm_framebuffer *fb = plane->state->fb;
 	struct drm_gem_object *gem;
 	struct mtk_drm_gem_obj *mtk_gem;
+	unsigned int pitch, format;
+	dma_addr_t addr;
 
-	if (!crtc)
+	if (!crtc || WARN_ON(!fb))
 		return;
 
-	gem = mtk_fb_get_gem_obj(state->base.fb);
+	gem = mtk_fb_get_gem_obj(fb);
 	mtk_gem = to_mtk_gem_obj(gem);
-	mtk_plane_enable(plane, mtk_gem->dma_addr);
+	addr = mtk_gem->dma_addr;
+	pitch = fb->pitches[0];
+	format = fb->pixel_format;
+
+	addr += (plane->state->src.x1 >> 16) * 4;
+	addr += (plane->state->src.y1 >> 16) * pitch;
+
+	state->pending.enable = true;
+	state->pending.pitch = pitch;
+	state->pending.format = format;
+	state->pending.addr = addr;
+	state->pending.x = plane->state->dst.x1;
+	state->pending.y = plane->state->dst.y1;
+	state->pending.width = drm_rect_width(&plane->state->dst);
+	state->pending.height = drm_rect_height(&plane->state->dst);
+	wmb(); /* Make sure the above parameters are set before update */
+	state->pending.dirty = true;
 }
 
 static void mtk_plane_atomic_disable(struct drm_plane *plane,
-- 
1.7.9.5

[PATCH 6/7] drm/mediatek: plane: Use FB's format's cpp to compute x offset

[Bibby Hsieh]

From: Daniel Kurtz <djkurtz@chromium.org>

Use the framebuffer's format to compute its cpp, and use it when
calculating the address shift value.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_plane.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
index b3ddb20..c461a23 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
@@ -135,7 +135,7 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
 	pitch = fb->pitches[0];
 	format = fb->pixel_format;
 
-	addr += (plane->state->src.x1 >> 16) * 4;
+	addr += (plane->state->src.x1 >> 16) * drm_format_plane_cpp(format, 0);
 	addr += (plane->state->src.y1 >> 16) * pitch;
 
 	state->pending.enable = true;
-- 
1.7.9.5

[PATCH 7/7] drm/mediatek: Fix mtk_atomic_complete for runtime_pm

[Bibby Hsieh]

To properly implement atomic w/ runtime pm, we move
drm_atomic_helper_commit_modeset_enables() above
drm_atomic_helper_commit_planes() to ensure CRTCs are enabled before
modifying plane registers, and set active_only to true to filter out
plane update notifications when the CRTC is disabled.

According to the document from linux kernel:
Set the active_only parameters to true in order not to receive plane
update notifications related to a disabled CRTC. This avoids the need
to manually ignore plane updates in driver code when the driver and/or
hardware can't or just don't need to deal with updates on disabled
CRTCs, for example when supporting runtime PM.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_drv.c |   17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index b1223d5..507392a 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -61,10 +61,25 @@ static void mtk_atomic_complete(struct mtk_drm_private *private,
 
 	mtk_atomic_wait_for_fences(state);
 
+	/*
+	 * Mediatek drm supports runtime PM, so plane registers cannot be
+	 * written when their crtc is disabled.
+	 *
+	 * The comment for drm_atomic_helper_commit states:
+	 *     For drivers supporting runtime PM the recommended sequence is
+	 *
+	 *     drm_atomic_helper_commit_modeset_disables(dev, state);
+	 *     drm_atomic_helper_commit_modeset_enables(dev, state);
+	 *     drm_atomic_helper_commit_planes(dev, state, true);
+	 *
+	 * See the kerneldoc entries for these three functions for more details.
+	 */
 	drm_atomic_helper_commit_modeset_disables(drm, state);
-	drm_atomic_helper_commit_planes(drm, state, false);
 	drm_atomic_helper_commit_modeset_enables(drm, state);
+	drm_atomic_helper_commit_planes(drm, state, true);
+
 	drm_atomic_helper_wait_for_vblanks(drm, state);
+
 	drm_atomic_helper_cleanup_planes(drm, state);
 	drm_atomic_state_free(state);
 }
-- 
1.7.9.5

[PATCH 2/7] drm/mediatek: plane: Remove plane zpos/index

[CK Hu]

Hi, Bibby:

On Fri, 2016-07-29 at 17:04 +0800, Bibby Hsieh wrote:
> From: Daniel Kurtz <djkurtz@chromium.org>
> 
> It is not actually useful to a mtk plane to know its zpos/index, so just
> remove this field.
> 
> This let's us completely remove struct mtk_drm_plane in a follow up patch.

'let's us'? My English is not as good as native English speaker.
Otherwise, this patch looks good to me.

> 
> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_drm_crtc.c  |    2 +-
>  drivers/gpu/drm/mediatek/mtk_drm_plane.c |    4 +---
>  drivers/gpu/drm/mediatek/mtk_drm_plane.h |    4 +---
>  3 files changed, 3 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> index 24aa3ba..18211ab 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> @@ -559,7 +559,7 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
>  				(zpos == 1) ? DRM_PLANE_TYPE_CURSOR :
>  						DRM_PLANE_TYPE_OVERLAY;
>  		ret = mtk_plane_init(drm_dev, &mtk_crtc->planes[zpos],
> -				     BIT(pipe), type, zpos);
> +				     BIT(pipe), type);
>  		if (ret)
>  			goto unprepare;
>  	}
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> index 093db07..d28db57 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> @@ -189,8 +189,7 @@ static const struct drm_plane_helper_funcs mtk_plane_helper_funcs = {
>  };
>  
>  int mtk_plane_init(struct drm_device *dev, struct mtk_drm_plane *mtk_plane,
> -		   unsigned long possible_crtcs, enum drm_plane_type type,
> -		   unsigned int zpos)
> +		   unsigned long possible_crtcs, enum drm_plane_type type)
>  {
>  	int err;
>  
> @@ -203,7 +202,6 @@ int mtk_plane_init(struct drm_device *dev, struct mtk_drm_plane *mtk_plane,
>  	}
>  
>  	drm_plane_helper_add(&mtk_plane->base, &mtk_plane_helper_funcs);
> -	mtk_plane->idx = zpos;
>  
>  	return 0;
>  }
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.h b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
> index 72a7b3e..74dbeda 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_plane.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
> @@ -20,7 +20,6 @@
>  
>  struct mtk_drm_plane {
>  	struct drm_plane		base;
> -	unsigned int			idx;
>  };
>  
>  struct mtk_plane_pending_state {
> @@ -53,7 +52,6 @@ to_mtk_plane_state(struct drm_plane_state *state)
>  }
>  
>  int mtk_plane_init(struct drm_device *dev, struct mtk_drm_plane *mtk_plane,
> -		   unsigned long possible_crtcs, enum drm_plane_type type,
> -		   unsigned int zpos);
> +		   unsigned long possible_crtcs, enum drm_plane_type type);
>  
>  #endif

Regards,
CK

[PATCH 0/7] drm/mediatek: cleaning up and refine

[Sean Paul]

On Fri, Jul 29, 2016 at 5:04 AM, Bibby Hsieh <bibby.hsieh@mediatek.com> wrote:
> These patches based on 4.7-rc1 to clean up unused function & variable
> and use drm core function instead.
>
> The following patches are needed to cleanly apply on top of v4.7-rc1:
>  - https://patchwork.kernel.org/patch/8044001/
>    (drm: Deal with rotation in drm_plane_helper_check_update())
>  - https://patchwork.kernel.org/patch/9248373/
>    (drm: Warn about negative sizes when calculating scale factor)
>  - https://patchwork.kernel.org/patch/9248371/
>    (drm: Store clipped src/dst coordinatee in drm_plane_state)
>  - https://patchwork.kernel.org/patch/9248363/
>    (drm/plane-helper: Add drm_plane_helper_check_state())
>  - https://patchwork.kernel.org/patch/9248361/
>    (drm/mediatek: Use drm_plane_helper_check_state())
>
> Bibby Hsieh (2):
>   drm/mediatek: Use drm_atomic destroy_state helpers
>   drm/mediatek: Fix mtk_atomic_complete for runtime_pm
>
> Daniel Kurtz (5):
>   drm/mediatek: Remove mtk_drm_crtc_check_flush
>   drm/mediatek: plane: Remove plane zpos/index
>   drm/mediatek: Remove mtk_drm_plane
>   drm/mediatek: plane: Merge mtk_plane_enable into
>     mtk_plane_atomic_update
>   drm/mediatek: plane: Use FB's format's cpp to compute x offset
>


The whole set looks good to me.


Reviewed-by: Sean Paul <seanpaul@chromium.org>


>  drivers/gpu/drm/mediatek/mtk_drm_crtc.c  |   21 ++++----
>  drivers/gpu/drm/mediatek/mtk_drm_crtc.h  |    1 -
>  drivers/gpu/drm/mediatek/mtk_drm_drv.c   |   17 ++++++-
>  drivers/gpu/drm/mediatek/mtk_drm_plane.c |   80 +++++++++++-------------------
>  drivers/gpu/drm/mediatek/mtk_drm_plane.h |   15 +-----
>  5 files changed, 56 insertions(+), 78 deletions(-)
>
> --
> 1.7.9.5
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 5/7] drm/mediatek: plane: Merge mtk_plane_enable into mtk_plane_atomic_update

[Sean Paul]

On Fri, Jul 29, 2016 at 5:04 AM, Bibby Hsieh <bibby.hsieh@mediatek.com> wrote:
> From: Daniel Kurtz <djkurtz@chromium.org>
>
> The mtk_plane_enable is just called once by mtk_plane_atomic_update.
> So, merge mtk_plane_enable into mtk_plane_atomic_update.
>
> While we are here, also clean up the function a bit by using an fb local
> variables.
>
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
> ---
>  drivers/gpu/drm/mediatek/mtk_drm_plane.c |   65 +++++++++++-------------------
>  1 file changed, 23 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> index 17172ba..b3ddb20 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> @@ -30,44 +30,6 @@ static const u32 formats[] = {
>         DRM_FORMAT_RGB565,
>  };
>
> -static void mtk_plane_enable(struct drm_plane *plane,


Hi Bibby,
This doesn't merge cleanly.


It seems like upstream has:

static void mtk_plane_enable(struct mtk_drm_plane *mtk_plane,


Whereas your version of "is based on some downstream version of
"drm/mediatek: Use drm_plane_helper_check_state()" which changed this
to struct drm_plane. Can you respin the set such that the
mtk_drm_plane removal patch fixes this?

Your set should apply cleanly to
https://cgit.freedesktop.org/~seanpaul/birch/?h=for-misc

Thanks,

Sean



> -                            dma_addr_t addr)
> -{
> -       struct mtk_plane_state *state = to_mtk_plane_state(plane->state);
> -       unsigned int pitch, format;
> -       bool enable;
> -
> -       if (WARN_ON(!plane->state))
> -               return;
> -
> -       enable = state->base.visible;
> -
> -       if (WARN_ON(enable && !plane->state->fb))
> -               return;
> -
> -       if (plane->state->fb) {
> -               pitch = plane->state->fb->pitches[0];
> -               format = plane->state->fb->pixel_format;
> -       } else {
> -               pitch = 0;
> -               format = DRM_FORMAT_RGBA8888;
> -       }
> -
> -       addr += (state->base.src.x1 >> 16) * 4;
> -       addr += (state->base.src.y1 >> 16) * pitch;
> -
> -       state->pending.enable = enable;
> -       state->pending.pitch = pitch;
> -       state->pending.format = format;
> -       state->pending.addr = addr;
> -       state->pending.x = state->base.dst.x1;
> -       state->pending.y = state->base.dst.y1;
> -       state->pending.width = drm_rect_width(&state->base.dst);
> -       state->pending.height = drm_rect_height(&state->base.dst);
> -       wmb(); /* Make sure the above parameters are set before update */
> -       state->pending.dirty = true;
> -}
> -
>  static void mtk_plane_reset(struct drm_plane *plane)
>  {
>         struct mtk_plane_state *state;
> @@ -157,16 +119,35 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
>                                     struct drm_plane_state *old_state)
>  {
>         struct mtk_plane_state *state = to_mtk_plane_state(plane->state);
> -       struct drm_crtc *crtc = state->base.crtc;
> +       struct drm_crtc *crtc = plane->state->crtc;
> +       struct drm_framebuffer *fb = plane->state->fb;
>         struct drm_gem_object *gem;
>         struct mtk_drm_gem_obj *mtk_gem;
> +       unsigned int pitch, format;
> +       dma_addr_t addr;
>
> -       if (!crtc)
> +       if (!crtc || WARN_ON(!fb))
>                 return;
>
> -       gem = mtk_fb_get_gem_obj(state->base.fb);
> +       gem = mtk_fb_get_gem_obj(fb);
>         mtk_gem = to_mtk_gem_obj(gem);
> -       mtk_plane_enable(plane, mtk_gem->dma_addr);
> +       addr = mtk_gem->dma_addr;
> +       pitch = fb->pitches[0];
> +       format = fb->pixel_format;
> +
> +       addr += (plane->state->src.x1 >> 16) * 4;
> +       addr += (plane->state->src.y1 >> 16) * pitch;
> +
> +       state->pending.enable = true;
> +       state->pending.pitch = pitch;
> +       state->pending.format = format;
> +       state->pending.addr = addr;
> +       state->pending.x = plane->state->dst.x1;
> +       state->pending.y = plane->state->dst.y1;
> +       state->pending.width = drm_rect_width(&plane->state->dst);
> +       state->pending.height = drm_rect_height(&plane->state->dst);
> +       wmb(); /* Make sure the above parameters are set before update */
> +       state->pending.dirty = true;
>  }
>
>  static void mtk_plane_atomic_disable(struct drm_plane *plane,
> --
> 1.7.9.5
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 5/7] drm/mediatek: plane: Merge mtk_plane_enable into mtk_plane_atomic_update

[Sean Paul]

On Tue, Aug 2, 2016 at 1:02 PM, Sean Paul <seanpaul@chromium.org> wrote:
> On Fri, Jul 29, 2016 at 5:04 AM, Bibby Hsieh <bibby.hsieh@mediatek.com> wrote:
>> From: Daniel Kurtz <djkurtz@chromium.org>
>>
>> The mtk_plane_enable is just called once by mtk_plane_atomic_update.
>> So, merge mtk_plane_enable into mtk_plane_atomic_update.
>>
>> While we are here, also clean up the function a bit by using an fb local
>> variables.
>>
>> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
>> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
>> ---
>>  drivers/gpu/drm/mediatek/mtk_drm_plane.c |   65 +++++++++++-------------------
>>  1 file changed, 23 insertions(+), 42 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
>> index 17172ba..b3ddb20 100644
>> --- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
>> +++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
>> @@ -30,44 +30,6 @@ static const u32 formats[] = {
>>         DRM_FORMAT_RGB565,
>>  };
>>
>> -static void mtk_plane_enable(struct drm_plane *plane,
>
>
> Hi Bibby,
> This doesn't merge cleanly.
>
>
> It seems like upstream has:
>
> static void mtk_plane_enable(struct mtk_drm_plane *mtk_plane,
>
>
> Whereas your version of "is based on some downstream version of
> "drm/mediatek: Use drm_plane_helper_check_state()" which changed this
> to struct drm_plane. Can you respin the set such that the
> mtk_drm_plane removal patch fixes this?


Let me try that again, looks like I mangled my cut/paste:

Whereas your version of "drm/mediatek: Use
drm_plane_helper_check_state()" is based on some downstream version
which changed this to struct drm_plane. Can you respin the set such
that the mtk_drm_plane removal patch fixes this?

Sean

>
> Your set should apply cleanly to
> https://cgit.freedesktop.org/~seanpaul/birch/?h=for-misc
>
> Thanks,
>
> Sean
>
>
>
>> -                            dma_addr_t addr)
>> -{
>> -       struct mtk_plane_state *state = to_mtk_plane_state(plane->state);
>> -       unsigned int pitch, format;
>> -       bool enable;
>> -
>> -       if (WARN_ON(!plane->state))
>> -               return;
>> -
>> -       enable = state->base.visible;
>> -
>> -       if (WARN_ON(enable && !plane->state->fb))
>> -               return;
>> -
>> -       if (plane->state->fb) {
>> -               pitch = plane->state->fb->pitches[0];
>> -               format = plane->state->fb->pixel_format;
>> -       } else {
>> -               pitch = 0;
>> -               format = DRM_FORMAT_RGBA8888;
>> -       }
>> -
>> -       addr += (state->base.src.x1 >> 16) * 4;
>> -       addr += (state->base.src.y1 >> 16) * pitch;
>> -
>> -       state->pending.enable = enable;
>> -       state->pending.pitch = pitch;
>> -       state->pending.format = format;
>> -       state->pending.addr = addr;
>> -       state->pending.x = state->base.dst.x1;
>> -       state->pending.y = state->base.dst.y1;
>> -       state->pending.width = drm_rect_width(&state->base.dst);
>> -       state->pending.height = drm_rect_height(&state->base.dst);
>> -       wmb(); /* Make sure the above parameters are set before update */
>> -       state->pending.dirty = true;
>> -}
>> -
>>  static void mtk_plane_reset(struct drm_plane *plane)
>>  {
>>         struct mtk_plane_state *state;
>> @@ -157,16 +119,35 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
>>                                     struct drm_plane_state *old_state)
>>  {
>>         struct mtk_plane_state *state = to_mtk_plane_state(plane->state);
>> -       struct drm_crtc *crtc = state->base.crtc;
>> +       struct drm_crtc *crtc = plane->state->crtc;
>> +       struct drm_framebuffer *fb = plane->state->fb;
>>         struct drm_gem_object *gem;
>>         struct mtk_drm_gem_obj *mtk_gem;
>> +       unsigned int pitch, format;
>> +       dma_addr_t addr;
>>
>> -       if (!crtc)
>> +       if (!crtc || WARN_ON(!fb))
>>                 return;
>>
>> -       gem = mtk_fb_get_gem_obj(state->base.fb);
>> +       gem = mtk_fb_get_gem_obj(fb);
>>         mtk_gem = to_mtk_gem_obj(gem);
>> -       mtk_plane_enable(plane, mtk_gem->dma_addr);
>> +       addr = mtk_gem->dma_addr;
>> +       pitch = fb->pitches[0];
>> +       format = fb->pixel_format;
>> +
>> +       addr += (plane->state->src.x1 >> 16) * 4;
>> +       addr += (plane->state->src.y1 >> 16) * pitch;
>> +
>> +       state->pending.enable = true;
>> +       state->pending.pitch = pitch;
>> +       state->pending.format = format;
>> +       state->pending.addr = addr;
>> +       state->pending.x = plane->state->dst.x1;
>> +       state->pending.y = plane->state->dst.y1;
>> +       state->pending.width = drm_rect_width(&plane->state->dst);
>> +       state->pending.height = drm_rect_height(&plane->state->dst);
>> +       wmb(); /* Make sure the above parameters are set before update */
>> +       state->pending.dirty = true;
>>  }
>>
>>  static void mtk_plane_atomic_disable(struct drm_plane *plane,
>> --
>> 1.7.9.5
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 5/7] drm/mediatek: plane: Merge mtk_plane_enable into mtk_plane_atomic_update

[Bibby Hsieh]

On Tue, 2016-08-02 at 13:04 -0400, Sean Paul wrote:
> On Tue, Aug 2, 2016 at 1:02 PM, Sean Paul <seanpaul@chromium.org> wrote:
> > On Fri, Jul 29, 2016 at 5:04 AM, Bibby Hsieh <bibby.hsieh@mediatek.com> wrote:
> >> From: Daniel Kurtz <djkurtz@chromium.org>
> >>
> >> The mtk_plane_enable is just called once by mtk_plane_atomic_update.
> >> So, merge mtk_plane_enable into mtk_plane_atomic_update.
> >>
> >> While we are here, also clean up the function a bit by using an fb local
> >> variables.
> >>
> >> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> >> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
> >> ---
> >>  drivers/gpu/drm/mediatek/mtk_drm_plane.c |   65 +++++++++++-------------------
> >>  1 file changed, 23 insertions(+), 42 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> >> index 17172ba..b3ddb20 100644
> >> --- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> >> +++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> >> @@ -30,44 +30,6 @@ static const u32 formats[] = {
> >>         DRM_FORMAT_RGB565,
> >>  };
> >>
> >> -static void mtk_plane_enable(struct drm_plane *plane,
> >
> >
> > Hi Bibby,
> > This doesn't merge cleanly.
> >
> >
> > It seems like upstream has:
> >
> > static void mtk_plane_enable(struct mtk_drm_plane *mtk_plane,
> >
> >
> > Whereas your version of "is based on some downstream version of
> > "drm/mediatek: Use drm_plane_helper_check_state()" which changed this
> > to struct drm_plane. Can you respin the set such that the
> > mtk_drm_plane removal patch fixes this?
> 
> 
> Let me try that again, looks like I mangled my cut/paste:
> 
> Whereas your version of "drm/mediatek: Use
> drm_plane_helper_check_state()" is based on some downstream version
> which changed this to struct drm_plane. Can you respin the set such
> that the mtk_drm_plane removal patch fixes this?
> 
Sorry about the mistake, I am going to fix that as soon as possible,
thanks for your review.


Bibby
> Sean
> 
> >
> > Your set should apply cleanly to
> > https://cgit.freedesktop.org/~seanpaul/birch/?h=for-misc
> >
> > Thanks,
> >
> > Sean
> >
> >
> >
> >> -                            dma_addr_t addr)
> >> -{
> >> -       struct mtk_plane_state *state = to_mtk_plane_state(plane->state);
> >> -       unsigned int pitch, format;
> >> -       bool enable;
> >> -
> >> -       if (WARN_ON(!plane->state))
> >> -               return;
> >> -
> >> -       enable = state->base.visible;
> >> -
> >> -       if (WARN_ON(enable && !plane->state->fb))
> >> -               return;
> >> -
> >> -       if (plane->state->fb) {
> >> -               pitch = plane->state->fb->pitches[0];
> >> -               format = plane->state->fb->pixel_format;
> >> -       } else {
> >> -               pitch = 0;
> >> -               format = DRM_FORMAT_RGBA8888;
> >> -       }
> >> -
> >> -       addr += (state->base.src.x1 >> 16) * 4;
> >> -       addr += (state->base.src.y1 >> 16) * pitch;
> >> -
> >> -       state->pending.enable = enable;
> >> -       state->pending.pitch = pitch;
> >> -       state->pending.format = format;
> >> -       state->pending.addr = addr;
> >> -       state->pending.x = state->base.dst.x1;
> >> -       state->pending.y = state->base.dst.y1;
> >> -       state->pending.width = drm_rect_width(&state->base.dst);
> >> -       state->pending.height = drm_rect_height(&state->base.dst);
> >> -       wmb(); /* Make sure the above parameters are set before update */
> >> -       state->pending.dirty = true;
> >> -}
> >> -
> >>  static void mtk_plane_reset(struct drm_plane *plane)
> >>  {
> >>         struct mtk_plane_state *state;
> >> @@ -157,16 +119,35 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
> >>                                     struct drm_plane_state *old_state)
> >>  {
> >>         struct mtk_plane_state *state = to_mtk_plane_state(plane->state);
> >> -       struct drm_crtc *crtc = state->base.crtc;
> >> +       struct drm_crtc *crtc = plane->state->crtc;
> >> +       struct drm_framebuffer *fb = plane->state->fb;
> >>         struct drm_gem_object *gem;
> >>         struct mtk_drm_gem_obj *mtk_gem;
> >> +       unsigned int pitch, format;
> >> +       dma_addr_t addr;
> >>
> >> -       if (!crtc)
> >> +       if (!crtc || WARN_ON(!fb))
> >>                 return;
> >>
> >> -       gem = mtk_fb_get_gem_obj(state->base.fb);
> >> +       gem = mtk_fb_get_gem_obj(fb);
> >>         mtk_gem = to_mtk_gem_obj(gem);
> >> -       mtk_plane_enable(plane, mtk_gem->dma_addr);
> >> +       addr = mtk_gem->dma_addr;
> >> +       pitch = fb->pitches[0];
> >> +       format = fb->pixel_format;
> >> +
> >> +       addr += (plane->state->src.x1 >> 16) * 4;
> >> +       addr += (plane->state->src.y1 >> 16) * pitch;
> >> +
> >> +       state->pending.enable = true;
> >> +       state->pending.pitch = pitch;
> >> +       state->pending.format = format;
> >> +       state->pending.addr = addr;
> >> +       state->pending.x = plane->state->dst.x1;
> >> +       state->pending.y = plane->state->dst.y1;
> >> +       state->pending.width = drm_rect_width(&plane->state->dst);
> >> +       state->pending.height = drm_rect_height(&plane->state->dst);
> >> +       wmb(); /* Make sure the above parameters are set before update */
> >> +       state->pending.dirty = true;
> >>  }
> >>
> >>  static void mtk_plane_atomic_disable(struct drm_plane *plane,
> >> --
> >> 1.7.9.5
> >>
> >> _______________________________________________
> >> dri-devel mailing list
> >> dri-devel at lists.freedesktop.org
> >> https://lists.freedesktop.org/mailman/listinfo/dri-devel