From: ulf.hansson@linaro.org (Ulf Hansson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/6] clk: ux500: pass clock base adresses in init call
Date: Thu, 21 Mar 2013 15:05:40 +0100 [thread overview]
Message-ID: <CAPDyKFoYDD4hOiCRRiRR8PAOC9my1KPuwC4wDentSRr4Tv+Q=A@mail.gmail.com> (raw)
In-Reply-To: <1363866553-15054-3-git-send-email-linus.walleij@stericsson.com>
On 21 March 2013 12:49, Linus Walleij <linus.walleij@stericsson.com> wrote:
> From: Linus Walleij <linus.walleij@linaro.org>
>
> The ux500 clock driver was including <mach/db8500-regs.h>
> which will not work when building for multiplatform support
> since <mach/*> is going away.
>
> Pass the base adresses in the init call instead.
>
> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> Cc: Mike Turquette <mturquette@linaro.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> Requesting an ACK from Mike on this to merge it through
> the ARM SoC tree eventually.
> ---
> arch/arm/mach-ux500/cpu.c | 4 +-
> drivers/clk/ux500/u8500_clk.c | 142 ++++++++++++++++----------------
> include/linux/platform_data/clk-ux500.h | 3 +-
> 3 files changed, 76 insertions(+), 73 deletions(-)
>
> diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
> index 537870d..741d06a 100644
> --- a/arch/arm/mach-ux500/cpu.c
> +++ b/arch/arm/mach-ux500/cpu.c
> @@ -72,7 +72,9 @@ void __init ux500_init_irq(void)
> db8500_prcmu_early_init();
>
> if (cpu_is_u8500_family() || cpu_is_u9540())
> - u8500_clk_init();
> + u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
> + U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
> + U8500_CLKRST6_BASE);
> else if (cpu_is_u8540())
> u8540_clk_init();
> }
> diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c
> index 6b889a0..0c9b83d 100644
> --- a/drivers/clk/ux500/u8500_clk.c
> +++ b/drivers/clk/ux500/u8500_clk.c
> @@ -12,10 +12,10 @@
> #include <linux/clk-provider.h>
> #include <linux/mfd/dbx500-prcmu.h>
> #include <linux/platform_data/clk-ux500.h>
> -#include <mach/db8500-regs.h>
> #include "clk.h"
>
> -void u8500_clk_init(void)
> +void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
> + u32 clkrst5_base, u32 clkrst6_base)
> {
> struct prcmu_fw_version *fw_version;
> const char *sgaclk_parent = NULL;
> @@ -215,147 +215,147 @@ void u8500_clk_init(void)
> */
>
> /* PRCC P-clocks */
> - clk = clk_reg_prcc_pclk("p1_pclk0", "per1clk", U8500_CLKRST1_BASE,
> + clk = clk_reg_prcc_pclk("p1_pclk0", "per1clk", clkrst1_base,
> BIT(0), 0);
> clk_register_clkdev(clk, "apb_pclk", "uart0");
>
> - clk = clk_reg_prcc_pclk("p1_pclk1", "per1clk", U8500_CLKRST1_BASE,
> + clk = clk_reg_prcc_pclk("p1_pclk1", "per1clk", clkrst1_base,
> BIT(1), 0);
> clk_register_clkdev(clk, "apb_pclk", "uart1");
>
> - clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", U8500_CLKRST1_BASE,
> + clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", clkrst1_base,
> BIT(2), 0);
> clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.1");
>
> - clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE,
> + clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", clkrst1_base,
> BIT(3), 0);
> clk_register_clkdev(clk, "apb_pclk", "msp0");
> clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.0");
>
> - clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE,
> + clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", clkrst1_base,
> BIT(4), 0);
> clk_register_clkdev(clk, "apb_pclk", "msp1");
> clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.1");
>
> - clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", U8500_CLKRST1_BASE,
> + clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", clkrst1_base,
> BIT(5), 0);
> clk_register_clkdev(clk, "apb_pclk", "sdi0");
>
> - clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", U8500_CLKRST1_BASE,
> + clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", clkrst1_base,
> BIT(6), 0);
> clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.2");
>
> - clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", U8500_CLKRST1_BASE,
> + clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", clkrst1_base,
> BIT(7), 0);
> clk_register_clkdev(clk, NULL, "spi3");
>
> - clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", U8500_CLKRST1_BASE,
> + clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", clkrst1_base,
> BIT(8), 0);
> clk_register_clkdev(clk, "apb_pclk", "slimbus0");
>
> - clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", U8500_CLKRST1_BASE,
> + clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", clkrst1_base,
> BIT(9), 0);
> clk_register_clkdev(clk, NULL, "gpio.0");
> clk_register_clkdev(clk, NULL, "gpio.1");
> clk_register_clkdev(clk, NULL, "gpioblock0");
>
> - clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", U8500_CLKRST1_BASE,
> + clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", clkrst1_base,
> BIT(10), 0);
> clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.4");
>
> - clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE,
> + clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", clkrst1_base,
> BIT(11), 0);
> clk_register_clkdev(clk, "apb_pclk", "msp3");
> clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.3");
>
> - clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE,
> + clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", clkrst2_base,
> BIT(0), 0);
> clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.3");
>
> - clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", U8500_CLKRST2_BASE,
> + clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", clkrst2_base,
> BIT(1), 0);
> clk_register_clkdev(clk, NULL, "spi2");
>
> - clk = clk_reg_prcc_pclk("p2_pclk2", "per2clk", U8500_CLKRST2_BASE,
> + clk = clk_reg_prcc_pclk("p2_pclk2", "per2clk", clkrst2_base,
> BIT(2), 0);
> clk_register_clkdev(clk, NULL, "spi1");
>
> - clk = clk_reg_prcc_pclk("p2_pclk3", "per2clk", U8500_CLKRST2_BASE,
> + clk = clk_reg_prcc_pclk("p2_pclk3", "per2clk", clkrst2_base,
> BIT(3), 0);
> clk_register_clkdev(clk, NULL, "pwl");
>
> - clk = clk_reg_prcc_pclk("p2_pclk4", "per2clk", U8500_CLKRST2_BASE,
> + clk = clk_reg_prcc_pclk("p2_pclk4", "per2clk", clkrst2_base,
> BIT(4), 0);
> clk_register_clkdev(clk, "apb_pclk", "sdi4");
>
> - clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", U8500_CLKRST2_BASE,
> + clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", clkrst2_base,
> BIT(5), 0);
> clk_register_clkdev(clk, "apb_pclk", "msp2");
> clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.2");
>
> - clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", U8500_CLKRST2_BASE,
> + clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", clkrst2_base,
> BIT(6), 0);
> clk_register_clkdev(clk, "apb_pclk", "sdi1");
>
> - clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", U8500_CLKRST2_BASE,
> + clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", clkrst2_base,
> BIT(7), 0);
> clk_register_clkdev(clk, "apb_pclk", "sdi3");
>
> - clk = clk_reg_prcc_pclk("p2_pclk8", "per2clk", U8500_CLKRST2_BASE,
> + clk = clk_reg_prcc_pclk("p2_pclk8", "per2clk", clkrst2_base,
> BIT(8), 0);
> clk_register_clkdev(clk, NULL, "spi0");
>
> - clk = clk_reg_prcc_pclk("p2_pclk9", "per2clk", U8500_CLKRST2_BASE,
> + clk = clk_reg_prcc_pclk("p2_pclk9", "per2clk", clkrst2_base,
> BIT(9), 0);
> clk_register_clkdev(clk, "hsir_hclk", "ste_hsi.0");
>
> - clk = clk_reg_prcc_pclk("p2_pclk10", "per2clk", U8500_CLKRST2_BASE,
> + clk = clk_reg_prcc_pclk("p2_pclk10", "per2clk", clkrst2_base,
> BIT(10), 0);
> clk_register_clkdev(clk, "hsit_hclk", "ste_hsi.0");
>
> - clk = clk_reg_prcc_pclk("p2_pclk11", "per2clk", U8500_CLKRST2_BASE,
> + clk = clk_reg_prcc_pclk("p2_pclk11", "per2clk", clkrst2_base,
> BIT(11), 0);
> clk_register_clkdev(clk, NULL, "gpio.6");
> clk_register_clkdev(clk, NULL, "gpio.7");
> clk_register_clkdev(clk, NULL, "gpioblock1");
>
> - clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", U8500_CLKRST2_BASE,
> + clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", clkrst2_base,
> BIT(12), 0);
>
> - clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", U8500_CLKRST3_BASE,
> + clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", clkrst3_base,
> BIT(0), 0);
> clk_register_clkdev(clk, NULL, "fsmc");
>
> - clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE,
> + clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", clkrst3_base,
> BIT(1), 0);
> clk_register_clkdev(clk, "apb_pclk", "ssp0");
>
> - clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE,
> + clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", clkrst3_base,
> BIT(2), 0);
> clk_register_clkdev(clk, "apb_pclk", "ssp1");
>
> - clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE,
> + clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", clkrst3_base,
> BIT(3), 0);
> clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.0");
>
> - clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", U8500_CLKRST3_BASE,
> + clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", clkrst3_base,
> BIT(4), 0);
> clk_register_clkdev(clk, "apb_pclk", "sdi2");
>
> - clk = clk_reg_prcc_pclk("p3_pclk5", "per3clk", U8500_CLKRST3_BASE,
> + clk = clk_reg_prcc_pclk("p3_pclk5", "per3clk", clkrst3_base,
> BIT(5), 0);
> clk_register_clkdev(clk, "apb_pclk", "ske");
> clk_register_clkdev(clk, "apb_pclk", "nmk-ske-keypad");
>
> - clk = clk_reg_prcc_pclk("p3_pclk6", "per3clk", U8500_CLKRST3_BASE,
> + clk = clk_reg_prcc_pclk("p3_pclk6", "per3clk", clkrst3_base,
> BIT(6), 0);
> clk_register_clkdev(clk, "apb_pclk", "uart2");
>
> - clk = clk_reg_prcc_pclk("p3_pclk7", "per3clk", U8500_CLKRST3_BASE,
> + clk = clk_reg_prcc_pclk("p3_pclk7", "per3clk", clkrst3_base,
> BIT(7), 0);
> clk_register_clkdev(clk, "apb_pclk", "sdi5");
>
> - clk = clk_reg_prcc_pclk("p3_pclk8", "per3clk", U8500_CLKRST3_BASE,
> + clk = clk_reg_prcc_pclk("p3_pclk8", "per3clk", clkrst3_base,
> BIT(8), 0);
> clk_register_clkdev(clk, NULL, "gpio.2");
> clk_register_clkdev(clk, NULL, "gpio.3");
> @@ -363,45 +363,45 @@ void u8500_clk_init(void)
> clk_register_clkdev(clk, NULL, "gpio.5");
> clk_register_clkdev(clk, NULL, "gpioblock2");
>
> - clk = clk_reg_prcc_pclk("p5_pclk0", "per5clk", U8500_CLKRST5_BASE,
> + clk = clk_reg_prcc_pclk("p5_pclk0", "per5clk", clkrst5_base,
> BIT(0), 0);
> clk_register_clkdev(clk, "usb", "musb-ux500.0");
>
> - clk = clk_reg_prcc_pclk("p5_pclk1", "per5clk", U8500_CLKRST5_BASE,
> + clk = clk_reg_prcc_pclk("p5_pclk1", "per5clk", clkrst5_base,
> BIT(1), 0);
> clk_register_clkdev(clk, NULL, "gpio.8");
> clk_register_clkdev(clk, NULL, "gpioblock3");
>
> - clk = clk_reg_prcc_pclk("p6_pclk0", "per6clk", U8500_CLKRST6_BASE,
> + clk = clk_reg_prcc_pclk("p6_pclk0", "per6clk", clkrst6_base,
> BIT(0), 0);
> clk_register_clkdev(clk, "apb_pclk", "rng");
>
> - clk = clk_reg_prcc_pclk("p6_pclk1", "per6clk", U8500_CLKRST6_BASE,
> + clk = clk_reg_prcc_pclk("p6_pclk1", "per6clk", clkrst6_base,
> BIT(1), 0);
> clk_register_clkdev(clk, NULL, "cryp0");
> clk_register_clkdev(clk, NULL, "cryp1");
>
> - clk = clk_reg_prcc_pclk("p6_pclk2", "per6clk", U8500_CLKRST6_BASE,
> + clk = clk_reg_prcc_pclk("p6_pclk2", "per6clk", clkrst6_base,
> BIT(2), 0);
> clk_register_clkdev(clk, NULL, "hash0");
>
> - clk = clk_reg_prcc_pclk("p6_pclk3", "per6clk", U8500_CLKRST6_BASE,
> + clk = clk_reg_prcc_pclk("p6_pclk3", "per6clk", clkrst6_base,
> BIT(3), 0);
> clk_register_clkdev(clk, NULL, "pka");
>
> - clk = clk_reg_prcc_pclk("p6_pclk4", "per6clk", U8500_CLKRST6_BASE,
> + clk = clk_reg_prcc_pclk("p6_pclk4", "per6clk", clkrst6_base,
> BIT(4), 0);
> clk_register_clkdev(clk, NULL, "hash1");
>
> - clk = clk_reg_prcc_pclk("p6_pclk5", "per6clk", U8500_CLKRST6_BASE,
> + clk = clk_reg_prcc_pclk("p6_pclk5", "per6clk", clkrst6_base,
> BIT(5), 0);
> clk_register_clkdev(clk, NULL, "cfgreg");
>
> - clk = clk_reg_prcc_pclk("p6_pclk6", "per6clk", U8500_CLKRST6_BASE,
> + clk = clk_reg_prcc_pclk("p6_pclk6", "per6clk", clkrst6_base,
> BIT(6), 0);
> clk_register_clkdev(clk, "apb_pclk", "mtu0");
>
> - clk = clk_reg_prcc_pclk("p6_pclk7", "per6clk", U8500_CLKRST6_BASE,
> + clk = clk_reg_prcc_pclk("p6_pclk7", "per6clk", clkrst6_base,
> BIT(7), 0);
> clk_register_clkdev(clk, "apb_pclk", "mtu1");
>
> @@ -415,110 +415,110 @@ void u8500_clk_init(void)
>
> /* Periph1 */
> clk = clk_reg_prcc_kclk("p1_uart0_kclk", "uartclk",
> - U8500_CLKRST1_BASE, BIT(0), CLK_SET_RATE_GATE);
> + clkrst1_base, BIT(0), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "uart0");
>
> clk = clk_reg_prcc_kclk("p1_uart1_kclk", "uartclk",
> - U8500_CLKRST1_BASE, BIT(1), CLK_SET_RATE_GATE);
> + clkrst1_base, BIT(1), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "uart1");
>
> clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk",
> - U8500_CLKRST1_BASE, BIT(2), CLK_SET_RATE_GATE);
> + clkrst1_base, BIT(2), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "nmk-i2c.1");
>
> clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk",
> - U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
> + clkrst1_base, BIT(3), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "msp0");
> clk_register_clkdev(clk, NULL, "ux500-msp-i2s.0");
>
> clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk",
> - U8500_CLKRST1_BASE, BIT(4), CLK_SET_RATE_GATE);
> + clkrst1_base, BIT(4), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "msp1");
> clk_register_clkdev(clk, NULL, "ux500-msp-i2s.1");
>
> clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk",
> - U8500_CLKRST1_BASE, BIT(5), CLK_SET_RATE_GATE);
> + clkrst1_base, BIT(5), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "sdi0");
>
> clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk",
> - U8500_CLKRST1_BASE, BIT(6), CLK_SET_RATE_GATE);
> + clkrst1_base, BIT(6), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "nmk-i2c.2");
>
> clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk",
> - U8500_CLKRST1_BASE, BIT(8), CLK_SET_RATE_GATE);
> + clkrst1_base, BIT(8), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "slimbus0");
>
> clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk",
> - U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE);
> + clkrst1_base, BIT(9), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "nmk-i2c.4");
>
> clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk",
> - U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE);
> + clkrst1_base, BIT(10), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "msp3");
> clk_register_clkdev(clk, NULL, "ux500-msp-i2s.3");
>
> /* Periph2 */
> clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk",
> - U8500_CLKRST2_BASE, BIT(0), CLK_SET_RATE_GATE);
> + clkrst2_base, BIT(0), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "nmk-i2c.3");
>
> clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk",
> - U8500_CLKRST2_BASE, BIT(2), CLK_SET_RATE_GATE);
> + clkrst2_base, BIT(2), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "sdi4");
>
> clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk",
> - U8500_CLKRST2_BASE, BIT(3), CLK_SET_RATE_GATE);
> + clkrst2_base, BIT(3), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "msp2");
> clk_register_clkdev(clk, NULL, "ux500-msp-i2s.2");
>
> clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk",
> - U8500_CLKRST2_BASE, BIT(4), CLK_SET_RATE_GATE);
> + clkrst2_base, BIT(4), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "sdi1");
>
> clk = clk_reg_prcc_kclk("p2_sdi3_kclk", "sdmmcclk",
> - U8500_CLKRST2_BASE, BIT(5), CLK_SET_RATE_GATE);
> + clkrst2_base, BIT(5), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "sdi3");
>
> /* Note that rate is received from parent. */
> clk = clk_reg_prcc_kclk("p2_ssirx_kclk", "hsirxclk",
> - U8500_CLKRST2_BASE, BIT(6),
> + clkrst2_base, BIT(6),
> CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
> clk = clk_reg_prcc_kclk("p2_ssitx_kclk", "hsitxclk",
> - U8500_CLKRST2_BASE, BIT(7),
> + clkrst2_base, BIT(7),
> CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
>
> /* Periph3 */
> clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk",
> - U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE);
> + clkrst3_base, BIT(1), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "ssp0");
>
> clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk",
> - U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE);
> + clkrst3_base, BIT(2), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "ssp1");
>
> clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk",
> - U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE);
> + clkrst3_base, BIT(3), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "nmk-i2c.0");
>
> clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk",
> - U8500_CLKRST3_BASE, BIT(4), CLK_SET_RATE_GATE);
> + clkrst3_base, BIT(4), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "sdi2");
>
> clk = clk_reg_prcc_kclk("p3_ske_kclk", "rtc32k",
> - U8500_CLKRST3_BASE, BIT(5), CLK_SET_RATE_GATE);
> + clkrst3_base, BIT(5), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "ske");
> clk_register_clkdev(clk, NULL, "nmk-ske-keypad");
>
> clk = clk_reg_prcc_kclk("p3_uart2_kclk", "uartclk",
> - U8500_CLKRST3_BASE, BIT(6), CLK_SET_RATE_GATE);
> + clkrst3_base, BIT(6), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "uart2");
>
> clk = clk_reg_prcc_kclk("p3_sdi5_kclk", "sdmmcclk",
> - U8500_CLKRST3_BASE, BIT(7), CLK_SET_RATE_GATE);
> + clkrst3_base, BIT(7), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "sdi5");
>
> /* Periph6 */
> clk = clk_reg_prcc_kclk("p3_rng_kclk", "rngclk",
> - U8500_CLKRST6_BASE, BIT(0), CLK_SET_RATE_GATE);
> + clkrst6_base, BIT(0), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "rng");
> }
> diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h
> index 3af0da1..320d9c3 100644
> --- a/include/linux/platform_data/clk-ux500.h
> +++ b/include/linux/platform_data/clk-ux500.h
> @@ -10,7 +10,8 @@
> #ifndef __CLK_UX500_H
> #define __CLK_UX500_H
>
> -void u8500_clk_init(void);
> +void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
> + u32 clkrst5_base, u32 clkrst6_base);
> void u9540_clk_init(void);
> void u8540_clk_init(void);
>
> --
> 1.7.11.3
>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
next prev parent reply other threads:[~2013-03-21 14:05 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-21 11:49 [PATCH 0/6] ARM: ux500: first multiplatform series Linus Walleij
2013-03-21 11:49 ` [PATCH 1/6] ARM: ux500: move debugmacro to debug includes Linus Walleij
2013-03-21 12:06 ` Arnd Bergmann
2013-03-21 11:49 ` [PATCH 2/6] clk: ux500: pass clock base adresses in init call Linus Walleij
2013-03-21 12:10 ` Arnd Bergmann
2013-03-21 14:05 ` Ulf Hansson [this message]
2013-03-21 17:50 ` Mike Turquette
2013-03-21 11:49 ` [PATCH 3/6] mfd: prcmu: pass a base and size with the early initcall Linus Walleij
2013-03-21 12:11 ` Arnd Bergmann
2013-03-21 14:01 ` Ulf Hansson
2013-03-21 11:49 ` [PATCH 4/6] mfd: db8500-prcmu: get base address from resource Linus Walleij
2013-03-21 12:15 ` Arnd Bergmann
2013-03-21 17:10 ` Linus Walleij
2013-03-21 19:07 ` Arnd Bergmann
2013-03-21 20:26 ` Loic PALLARDY
2013-03-21 11:49 ` [PATCH 5/6] ARM: ux500: move PRCMU functions into the CPUidle driver Linus Walleij
2013-03-21 12:14 ` Rickard Andersson
2013-03-21 12:30 ` Daniel Lezcano
2013-03-22 8:30 ` Rickard Andersson
2013-03-25 13:44 ` Linus Walleij
2013-03-25 13:58 ` Daniel Lezcano
2013-03-25 14:10 ` Linus Walleij
2013-03-25 14:11 ` Arnd Bergmann
2013-03-25 14:36 ` Linus Walleij
2013-03-25 15:13 ` Arnd Bergmann
2013-03-25 15:48 ` Linus Walleij
2013-03-21 11:49 ` [PATCH 6/6] ARM: ux500: get rid of <mach/[hardware|db8500-regs].h> Linus Walleij
2013-03-21 12:21 ` Arnd Bergmann
2013-03-21 21:51 ` [PATCH 0/9] More ux500 multiplatform stuff Arnd Bergmann
2013-03-21 21:51 ` [PATCH 1/9] ARM: ux500: move mach/msp.h to include/linux/platform_data.h Arnd Bergmann
2013-03-21 21:51 ` [PATCH 2/9] ARM: ux500: split out prcmu initialization Arnd Bergmann
2013-03-21 21:51 ` [PATCH 3/9] ARM: ux500: make irqs.h local to platform Arnd Bergmann
2013-03-21 21:51 ` [PATCH 4/9] ARM: ux500: kill mach/hardware.h some more Arnd Bergmann
2013-03-21 21:51 ` [PATCH 5/9] staging: ste_rmi4: kill platform_data hack Arnd Bergmann
2013-03-25 13:12 ` Linus Walleij
2013-03-25 18:00 ` Greg KH
2013-03-21 21:51 ` [PATCH 6/9] power: pm2301_charger: remove __devinit annotations Arnd Bergmann
2013-03-22 12:14 ` Linus Walleij
2013-03-22 15:16 ` Anton Vorontsov
2013-03-25 3:09 ` Anton Vorontsov
2013-03-21 21:51 ` [PATCH 7/9] ARM: ux500: make remaining headers local Arnd Bergmann
2013-03-21 21:51 ` [PATCH 8/9] ARM: ux500: move to multiplatform Arnd Bergmann
2013-03-21 21:51 ` [PATCH 9/9] ARM: ux500: build hotplug.o for ARMv7-a Arnd Bergmann
2013-03-22 13:21 ` [PATCH 0/9] More ux500 multiplatform stuff Linus Walleij
2013-03-22 13:34 ` Arnd Bergmann
2013-03-22 13:36 ` Linus Walleij
2013-03-22 14:16 ` Arnd Bergmann
2013-03-22 14:39 ` Linus Walleij
2013-03-22 15:25 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAPDyKFoYDD4hOiCRRiRR8PAOC9my1KPuwC4wDentSRr4Tv+Q=A@mail.gmail.com' \
--to=ulf.hansson@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).