[PATCH v14 0/3] mmc: mediatek: add support for SDIO async IRQ

[PATCH v14 0/3] mmc: mediatek: add support for SDIO async IRQ

[Axe Yang]

Changes in v14:
- add sdio_irq_claimed() judgement condition around msdc irq and pinctrl
  control in suspend|resume callback

Changes in v13:
- remove state_dat1 related description in mtk-sd.yaml
- move device_init_wakeup() to probe stage
- remove redundancy SDC_CFG_SDIOIDE bit control in msdc_runtime_suspend()
- replace SDC_CFG_SDIOIDE control with __msdc_enable_sdio_irq() function to
  disable sdio irq when sdio_irq_claimed() return true in msdc_runtime_resume()
- restore to use pm_runtime_force_resume|suspend(), to avoid go out directly
  in force resume, bump up runtime PM usage counter before force suspend. 

Changes in v12:
- assign NULL to pins_eint directly instead of using kfree()

Changes in v11:
- remove '_irq' suffix in interrupts-names property
- fix yaml example build error
- refactor msdc_enable_sdio_irq(), free pins_eint if async irq is not supported

Changes in v10:
- add sample node for SDIO host which support wakeup interrupt in yaml
- skip MMC_PM_WAKE_SDIO_IRQ check before enable SDIO async interrupt
- add MMC_PM_KEEP_POWER check before SDIO eint pinstate parsing
- use dev_pm_set_dedicated_wake_irq_reverse() to correct irq control sequence
- set dedicated irq in msdc_enable_sdio_irq() rather than msdc_drv_probe()
- remove unnecessary wake irq control, rpm/dpm system shall manage that
- move wake irq/msdc irq control back to system suspend phase, use rpm_suspend
  and rpm_resume to ensure irq control sequence:
     disable msdc irq -> enable wake irq -> disable wake irq -> enable msdc irq
- simplify variables, check pins_eint to know whether wakeup settings are managed

Changes in v9:
- remove pinctrl "state_dat1"

Changes in v8:
- remove maxItems property under pinctrl-names property

Changes in v7:
- add device_init_wakeup() to register SDIO host as wakeup source

Changes in v6:
- abandon cap-sdio-async-irq flag, use wakeup-source flag instead
- extend interrupts and pinctrls in mediatek mmc host controller DT documents
- add mmc_card_enable_async_irq() to access enable_async_irq flag
- simplify wakeup irq implementation with dedicate wake up irq related interface

Changes in v5:
- resort variables to reversed xmas tree order
- restore old copyright year range and add current year back

Changes in v4:
- add MMC_CAP2_SDIO_ASYNC_IRQ judge before lookup eint pinctrl
- replace spin_lock_irqsave() variant with spin_lock() in eint irq handler

Changes in v3:
- correct abbreviations with capital letters in commit message
- replace copyright year with 2022 in mtk-sd.c
- remove unnessary pointer casting
- adjust variable order to reversed xmas tree
- remove a redundant blank line
- refine if statement, following standard pattern

Changes in v2:
- change flag name from 'cap-sdio-async-int' to 'cap-sdio-async-irq'
- change corresponding macro names from xxx_INT to xxx_IRQ
- resort new member in msdc_host structure
- refine function msdc_request_dat1_eint_irq()
- rename msdc_{suspend,resume} function names, add suffix '_noirq'
- add MMC_CAP2_NO_SDIO judgement before parse eint related pin setting

Axe Yang (3):
  dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties
  mmc: core: Add support for SDIO wakeup interrupt
  mmc: mediatek: add support for SDIO eint wakup IRQ

 .../devicetree/bindings/mmc/mtk-sd.yaml       | 50 ++++++++++-
 drivers/mmc/core/sdio.c                       | 14 +++
 drivers/mmc/host/mtk-sd.c                     | 86 +++++++++++++++++--
 include/linux/mmc/card.h                      |  8 +-
 include/linux/mmc/sdio.h                      |  5 ++
 5 files changed, 155 insertions(+), 8 deletions(-)

-- 
2.25.1



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v14 1/3] dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties

[Axe Yang]

Extend interrupts and pinctrls for SDIO wakeup interrupt feature.
This feature allow SDIO devices alarm asynchronous interrupt to host
even when host stop providing clock to SDIO card. An extra wakeup
interrupt and pinctrl states for SDIO DAT1 pin state switching are
required in this scenario.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Axe Yang <axe.yang@mediatek.com>
---
 .../devicetree/bindings/mmc/mtk-sd.yaml       | 50 ++++++++++++++++++-
 1 file changed, 49 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
index be366cefffc2..083d1ec2f661 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
@@ -70,12 +70,27 @@ properties:
       - const: ahb_cg
 
   interrupts:
-    maxItems: 1
+    description:
+      Should at least contain MSDC GIC interrupt. To support SDIO in-band wakeup, an extended
+      interrupt is required and be configured as wakeup source irq.
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: msdc
+      - const: sdio_wakeup
 
   pinctrl-names:
+    description:
+      Should at least contain default and state_uhs. To support SDIO in-band wakeup, dat1 pin
+      will be switched between GPIO mode and SDIO DAT1 mode, state_eint is mandatory in this
+      scenario.
+    minItems: 2
     items:
       - const: default
       - const: state_uhs
+      - const: state_eint
 
   pinctrl-0:
     description:
@@ -87,6 +102,11 @@ properties:
       should contain uhs mode pin ctrl.
     maxItems: 1
 
+  pinctrl-2:
+    description:
+      should switch dat1 pin to GPIO mode.
+    maxItems: 1
+
   assigned-clocks:
     description:
       PLL of the source clock.
@@ -206,4 +226,32 @@ examples:
         mediatek,hs400-cmd-resp-sel-rising;
     };
 
+    mmc3: mmc@11260000 {
+        compatible = "mediatek,mt8173-mmc";
+        reg = <0x11260000 0x1000>;
+        clock-names = "source", "hclk";
+        clocks = <&pericfg CLK_PERI_MSDC30_3>,
+                 <&topckgen CLK_TOP_MSDC50_2_H_SEL>;
+        interrupt-names = "msdc", "sdio_wakeup";
+        interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_LOW 0>,
+                     <&pio 23 IRQ_TYPE_LEVEL_LOW>;
+        pinctrl-names = "default", "state_uhs", "state_eint";
+        pinctrl-0 = <&mmc2_pins_default>;
+        pinctrl-1 = <&mmc2_pins_uhs>;
+        pinctrl-2 = <&mmc2_pins_eint>;
+        bus-width = <4>;
+        max-frequency = <200000000>;
+        cap-sd-highspeed;
+        sd-uhs-sdr104;
+        keep-power-in-suspend;
+        wakeup-source;
+        cap-sdio-irq;
+        no-mmc;
+        no-sd;
+        non-removable;
+        vmmc-supply = <&sdio_fixed_3v3>;
+        vqmmc-supply = <&mt6397_vgp3_reg>;
+        mmc-pwrseq = <&wifi_pwrseq>;
+    };
+
 ...
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v14 2/3] mmc: core: Add support for SDIO wakeup interrupt

[Axe Yang]

If wakeup-source flag is set in host dts node, parse EAI information
from SDIO CCCR interrupt externsion segment for in-band wakeup. If
async interrupt is supported by SDIO card then enable it and set
enable_async_irq flag in sdio_cccr structure to 1. The parse flow is
implemented in sdio_read_cccr().

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Axe Yang <axe.yang@mediatek.com>
---
 drivers/mmc/core/sdio.c  | 14 ++++++++++++++
 include/linux/mmc/card.h |  8 +++++++-
 include/linux/mmc/sdio.h |  5 +++++
 3 files changed, 26 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index b589df1c35e0..0b682a31cd3e 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -226,6 +226,20 @@ static int sdio_read_cccr(struct mmc_card *card, u32 ocr)
 				card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_C;
 			if (data & SDIO_DRIVE_SDTD)
 				card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_D;
+
+			ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTERRUPT_EXT, 0, &data);
+			if (ret)
+				goto out;
+
+			if (data & SDIO_INTERRUPT_EXT_SAI) {
+				data |= SDIO_INTERRUPT_EXT_EAI;
+				ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_INTERRUPT_EXT,
+						       data, NULL);
+				if (ret)
+					goto out;
+
+				card->cccr.enable_async_irq = 1;
+			}
 		}
 
 		/* if no uhs mode ensure we check for high speed */
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 156a7b673a28..8a30de08e913 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -219,7 +219,8 @@ struct sdio_cccr {
 				wide_bus:1,
 				high_power:1,
 				high_speed:1,
-				disable_cd:1;
+				disable_cd:1,
+				enable_async_irq:1;
 };
 
 struct sdio_cis {
@@ -343,6 +344,11 @@ static inline bool mmc_large_sector(struct mmc_card *card)
 	return card->ext_csd.data_sector_size == 4096;
 }
 
+static inline int mmc_card_enable_async_irq(struct mmc_card *card)
+{
+	return card->cccr.enable_async_irq;
+}
+
 bool mmc_card_is_blockaddr(struct mmc_card *card);
 
 #define mmc_card_mmc(c)		((c)->type == MMC_TYPE_MMC)
diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h
index 2a05d1ac4f0e..1ef400f28642 100644
--- a/include/linux/mmc/sdio.h
+++ b/include/linux/mmc/sdio.h
@@ -159,6 +159,11 @@
 #define  SDIO_DTSx_SET_TYPE_A	(1 << SDIO_DRIVE_DTSx_SHIFT)
 #define  SDIO_DTSx_SET_TYPE_C	(2 << SDIO_DRIVE_DTSx_SHIFT)
 #define  SDIO_DTSx_SET_TYPE_D	(3 << SDIO_DRIVE_DTSx_SHIFT)
+
+#define SDIO_CCCR_INTERRUPT_EXT	0x16
+#define SDIO_INTERRUPT_EXT_SAI	(1 << 0)
+#define SDIO_INTERRUPT_EXT_EAI	(1 << 1)
+
 /*
  * Function Basic Registers (FBR)
  */
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v14 3/3] mmc: mediatek: add support for SDIO eint wakup IRQ

[Axe Yang]

Add support for eint IRQ when MSDC is used as an SDIO host. This
feature requires SDIO device support async IRQ function. With this
feature, SDIO host can be awakened by SDIO card in suspend state,
without additional pin.

MSDC driver will time-share the SDIO DAT1 pin. During suspend, MSDC
turn off clock and switch SDIO DAT1 pin to GPIO mode. And during
resume, switch GPIO function back to DAT1 mode then turn on clock.

Some device tree property should be added or modified in MSDC node
to support SDIO eint IRQ. Pinctrls "state_eint" is mandatory. Since
this feature depends on asynchronous interrupts, "wakeup-source",
"keep-power-in-suspend" and "cap-sdio-irq" flags are necessary, and
the interrupts list should be extended(the interrupt named with
sdio_wakeup):
        &mmcX {
		...
		interrupt-names = "msdc", "sdio_wakeup";
		interrupts-extended = <...>,
                              	      <&pio xxx IRQ_TYPE_LEVEL_LOW>;
                ...
                pinctrl-names = "default", "state_uhs", "state_eint";
                ...
                pinctrl-2 = <&mmc2_pins_eint>;
                ...
                cap-sdio-irq;
		keep-power-in-suspend;
		wakeup-source;
                ...
        };

Co-developed-by: Yong Mao <yong.mao@mediatek.com>
Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Reviewed-by: Chaotian Jing <chaotian.jing@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Axe Yang <axe.yang@mediatek.com>
---
 drivers/mmc/host/mtk-sd.c | 86 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 80 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index a4954b200d87..4ff73d1883de 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2014-2015 MediaTek Inc.
+ * Copyright (c) 2014-2015, 2022 MediaTek Inc.
  * Author: Chaotian.Jing <chaotian.jing@mediatek.com>
  */
 
@@ -20,6 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
+#include <linux/pm_wakeirq.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
@@ -440,8 +441,10 @@ struct msdc_host {
 	struct pinctrl *pinctrl;
 	struct pinctrl_state *pins_default;
 	struct pinctrl_state *pins_uhs;
+	struct pinctrl_state *pins_eint;
 	struct delayed_work req_timeout;
 	int irq;		/* host interrupt */
+	int eint_irq;		/* interrupt from sdio device for waking up system */
 	struct reset_control *reset;
 
 	struct clk *src_clk;	/* msdc source clock */
@@ -1521,17 +1524,46 @@ static void __msdc_enable_sdio_irq(struct msdc_host *host, int enb)
 
 static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
 {
-	unsigned long flags;
 	struct msdc_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	int ret;
 
 	spin_lock_irqsave(&host->lock, flags);
 	__msdc_enable_sdio_irq(host, enb);
 	spin_unlock_irqrestore(&host->lock, flags);
 
-	if (enb)
-		pm_runtime_get_noresume(host->dev);
-	else
-		pm_runtime_put_noidle(host->dev);
+	if (mmc_card_enable_async_irq(mmc->card) && host->pins_eint) {
+		if (enb) {
+			/*
+			 * In dev_pm_set_dedicated_wake_irq_reverse(), eint pin will be set to
+			 * GPIO mode. We need to restore it to SDIO DAT1 mode after that.
+			 * Since the current pinstate is pins_uhs, to ensure pinctrl select take
+			 * affect successfully, we change the pinstate to pins_eint firstly.
+			 */
+			pinctrl_select_state(host->pinctrl, host->pins_eint);
+			ret = dev_pm_set_dedicated_wake_irq_reverse(host->dev, host->eint_irq);
+
+			if (ret) {
+				dev_err(host->dev, "Failed to register SDIO wakeup irq!\n");
+				host->pins_eint = NULL;
+				pm_runtime_get_noresume(host->dev);
+			} else {
+				dev_dbg(host->dev, "SDIO eint irq: %d!\n", host->eint_irq);
+			}
+
+			pinctrl_select_state(host->pinctrl, host->pins_uhs);
+		} else {
+			dev_pm_clear_wake_irq(host->dev);
+		}
+	} else {
+		if (enb) {
+			/* Ensure host->pins_eint is NULL */
+			host->pins_eint = NULL;
+			pm_runtime_get_noresume(host->dev);
+		} else {
+			pm_runtime_put_noidle(host->dev);
+		}
+	}
 }
 
 static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
@@ -2635,6 +2667,20 @@ static int msdc_drv_probe(struct platform_device *pdev)
 		goto host_free;
 	}
 
+	/* Support for SDIO eint irq ? */
+	if ((mmc->pm_caps & MMC_PM_WAKE_SDIO_IRQ) && (mmc->pm_caps & MMC_PM_KEEP_POWER)) {
+		host->eint_irq = platform_get_irq_byname(pdev, "sdio_wakeup");
+		if (host->eint_irq > 0) {
+			host->pins_eint = pinctrl_lookup_state(host->pinctrl, "state_eint");
+			if (IS_ERR(host->pins_eint)) {
+				dev_err(&pdev->dev, "Cannot find pinctrl eint!\n");
+				host->pins_eint = NULL;
+			} else {
+				device_init_wakeup(&pdev->dev, true);
+			}
+		}
+	}
+
 	msdc_of_property_parse(pdev, host);
 
 	host->dev = &pdev->dev;
@@ -2849,6 +2895,15 @@ static int __maybe_unused msdc_runtime_suspend(struct device *dev)
 	struct msdc_host *host = mmc_priv(mmc);
 
 	msdc_save_reg(host);
+
+	if (sdio_irq_claimed(mmc)) {
+		if (host->pins_eint) {
+			disable_irq(host->irq);
+			pinctrl_select_state(host->pinctrl, host->pins_eint);
+		}
+
+		__msdc_enable_sdio_irq(host, 0);
+	}
 	msdc_gate_clock(host);
 	return 0;
 }
@@ -2864,12 +2919,18 @@ static int __maybe_unused msdc_runtime_resume(struct device *dev)
 		return ret;
 
 	msdc_restore_reg(host);
+
+	if (sdio_irq_claimed(mmc) && host->pins_eint) {
+		pinctrl_select_state(host->pinctrl, host->pins_uhs);
+		enable_irq(host->irq);
+	}
 	return 0;
 }
 
 static int __maybe_unused msdc_suspend(struct device *dev)
 {
 	struct mmc_host *mmc = dev_get_drvdata(dev);
+	struct msdc_host *host = mmc_priv(mmc);
 	int ret;
 
 	if (mmc->caps2 & MMC_CAP2_CQE) {
@@ -2878,11 +2939,24 @@ static int __maybe_unused msdc_suspend(struct device *dev)
 			return ret;
 	}
 
+	/*
+	 * Bump up runtime PM usage counter otherwise dev->power.needs_force_resume will
+	 * not be marked as 1, pm_runtime_force_resume() will go out directly.
+	 */
+	if (sdio_irq_claimed(mmc) && host->pins_eint)
+		pm_runtime_get_noresume(dev);
+
 	return pm_runtime_force_suspend(dev);
 }
 
 static int __maybe_unused msdc_resume(struct device *dev)
 {
+	struct mmc_host *mmc = dev_get_drvdata(dev);
+	struct msdc_host *host = mmc_priv(mmc);
+
+	if (sdio_irq_claimed(mmc) && host->pins_eint)
+		pm_runtime_put_noidle(dev);
+
 	return pm_runtime_force_resume(dev);
 }
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v14 1/3] dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties

[AngeloGioacchino Del Regno]

Il 26/07/22 08:28, Axe Yang ha scritto:
> Extend interrupts and pinctrls for SDIO wakeup interrupt feature.
> This feature allow SDIO devices alarm asynchronous interrupt to host
> even when host stop providing clock to SDIO card. An extra wakeup
> interrupt and pinctrl states for SDIO DAT1 pin state switching are
> required in this scenario.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Axe Yang <axe.yang@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

P.S.: R-b tags go after S-o-b tags!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v14 0/3] mmc: mediatek: add support for SDIO async IRQ

[Ulf Hansson]

On Tue, 26 Jul 2022 at 08:28, Axe Yang <axe.yang@mediatek.com> wrote:
>
> Changes in v14:
> - add sdio_irq_claimed() judgement condition around msdc irq and pinctrl
>   control in suspend|resume callback

Version 14, applied for next, thanks!

FYI; Since we are relying on an updated behaviour in the
pm_runtime_force_suspend|resume() helpers, which are queued as a patch
via Rafael's tree, I am going to withhold my pull-request for a few
days longer than usual, until Linus has picked up Rafael's
pull-request, for v5.20-rc1.

Kind regards
Uffe


>
> Changes in v13:
> - remove state_dat1 related description in mtk-sd.yaml
> - move device_init_wakeup() to probe stage
> - remove redundancy SDC_CFG_SDIOIDE bit control in msdc_runtime_suspend()
> - replace SDC_CFG_SDIOIDE control with __msdc_enable_sdio_irq() function to
>   disable sdio irq when sdio_irq_claimed() return true in msdc_runtime_resume()
> - restore to use pm_runtime_force_resume|suspend(), to avoid go out directly
>   in force resume, bump up runtime PM usage counter before force suspend.
>
> Changes in v12:
> - assign NULL to pins_eint directly instead of using kfree()
>
> Changes in v11:
> - remove '_irq' suffix in interrupts-names property
> - fix yaml example build error
> - refactor msdc_enable_sdio_irq(), free pins_eint if async irq is not supported
>
> Changes in v10:
> - add sample node for SDIO host which support wakeup interrupt in yaml
> - skip MMC_PM_WAKE_SDIO_IRQ check before enable SDIO async interrupt
> - add MMC_PM_KEEP_POWER check before SDIO eint pinstate parsing
> - use dev_pm_set_dedicated_wake_irq_reverse() to correct irq control sequence
> - set dedicated irq in msdc_enable_sdio_irq() rather than msdc_drv_probe()
> - remove unnecessary wake irq control, rpm/dpm system shall manage that
> - move wake irq/msdc irq control back to system suspend phase, use rpm_suspend
>   and rpm_resume to ensure irq control sequence:
>      disable msdc irq -> enable wake irq -> disable wake irq -> enable msdc irq
> - simplify variables, check pins_eint to know whether wakeup settings are managed
>
> Changes in v9:
> - remove pinctrl "state_dat1"
>
> Changes in v8:
> - remove maxItems property under pinctrl-names property
>
> Changes in v7:
> - add device_init_wakeup() to register SDIO host as wakeup source
>
> Changes in v6:
> - abandon cap-sdio-async-irq flag, use wakeup-source flag instead
> - extend interrupts and pinctrls in mediatek mmc host controller DT documents
> - add mmc_card_enable_async_irq() to access enable_async_irq flag
> - simplify wakeup irq implementation with dedicate wake up irq related interface
>
> Changes in v5:
> - resort variables to reversed xmas tree order
> - restore old copyright year range and add current year back
>
> Changes in v4:
> - add MMC_CAP2_SDIO_ASYNC_IRQ judge before lookup eint pinctrl
> - replace spin_lock_irqsave() variant with spin_lock() in eint irq handler
>
> Changes in v3:
> - correct abbreviations with capital letters in commit message
> - replace copyright year with 2022 in mtk-sd.c
> - remove unnessary pointer casting
> - adjust variable order to reversed xmas tree
> - remove a redundant blank line
> - refine if statement, following standard pattern
>
> Changes in v2:
> - change flag name from 'cap-sdio-async-int' to 'cap-sdio-async-irq'
> - change corresponding macro names from xxx_INT to xxx_IRQ
> - resort new member in msdc_host structure
> - refine function msdc_request_dat1_eint_irq()
> - rename msdc_{suspend,resume} function names, add suffix '_noirq'
> - add MMC_CAP2_NO_SDIO judgement before parse eint related pin setting
>
> Axe Yang (3):
>   dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties
>   mmc: core: Add support for SDIO wakeup interrupt
>   mmc: mediatek: add support for SDIO eint wakup IRQ
>
>  .../devicetree/bindings/mmc/mtk-sd.yaml       | 50 ++++++++++-
>  drivers/mmc/core/sdio.c                       | 14 +++
>  drivers/mmc/host/mtk-sd.c                     | 86 +++++++++++++++++--
>  include/linux/mmc/card.h                      |  8 +-
>  include/linux/mmc/sdio.h                      |  5 ++
>  5 files changed, 155 insertions(+), 8 deletions(-)
>
> --
> 2.25.1
>
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel