* [PATCH 1/2] arm64: dts: imx8qxp-mek: Sort labels alphabetically
@ 2020-03-10 8:52 Anson Huang
2020-03-10 8:52 ` [PATCH 2/2] arm64: dts: imx8qxp-mek: Add PMIC thermal zone support Anson Huang
2020-03-16 1:04 ` [PATCH 1/2] arm64: dts: imx8qxp-mek: Sort labels alphabetically Shawn Guo
0 siblings, 2 replies; 8+ messages in thread
From: Anson Huang @ 2020-03-10 8:52 UTC (permalink / raw)
To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, festevam,
leonard.crestez, daniel.baluta, abel.vesa, devicetree,
linux-arm-kernel, linux-kernel
Cc: Linux-imx
Sort the labels alphabetically for consistency.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 60 +++++++++++++--------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 13460a3..2ed7aba 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -30,29 +30,8 @@
};
};
-&adma_lpuart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lpuart0>;
- status = "okay";
-};
-
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1>;
- phy-mode = "rgmii-id";
- phy-handle = <ðphy0>;
- fsl,magic-packet;
+&adma_dsp {
status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
- };
};
&adma_i2c1 {
@@ -131,6 +110,35 @@
};
};
+&adma_lpuart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart0>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+ };
+};
+
+&scu_key {
+ status = "okay";
+};
+
&usdhc1 {
assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
assigned-clock-rates = <200000000>;
@@ -229,11 +237,3 @@
>;
};
};
-
-&adma_dsp {
- status = "okay";
-};
-
-&scu_key {
- status = "okay";
-};
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 2/2] arm64: dts: imx8qxp-mek: Add PMIC thermal zone support
2020-03-10 8:52 [PATCH 1/2] arm64: dts: imx8qxp-mek: Sort labels alphabetically Anson Huang
@ 2020-03-10 8:52 ` Anson Huang
2020-03-16 1:04 ` [PATCH 1/2] arm64: dts: imx8qxp-mek: Sort labels alphabetically Shawn Guo
1 sibling, 0 replies; 8+ messages in thread
From: Anson Huang @ 2020-03-10 8:52 UTC (permalink / raw)
To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, festevam,
leonard.crestez, daniel.baluta, abel.vesa, devicetree,
linux-arm-kernel, linux-kernel
Cc: Linux-imx
i.MX8QXP MEK board has PMIC thermal sensor, add support for it.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 33 +++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 2ed7aba..9b105ae 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -139,6 +139,39 @@
status = "okay";
};
+&thermal_zones {
+ pmic-thermal0 {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+ trips {
+ pmic_alert0: trip0 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ pmic_crit0: trip1 {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&pmic_alert0>;
+ cooling-device =
+ <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+};
+
&usdhc1 {
assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
assigned-clock-rates = <200000000>;
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH 1/2] arm64: dts: imx8qxp-mek: Sort labels alphabetically
2020-03-10 8:52 [PATCH 1/2] arm64: dts: imx8qxp-mek: Sort labels alphabetically Anson Huang
2020-03-10 8:52 ` [PATCH 2/2] arm64: dts: imx8qxp-mek: Add PMIC thermal zone support Anson Huang
@ 2020-03-16 1:04 ` Shawn Guo
2020-03-16 1:11 ` Anson Huang
1 sibling, 1 reply; 8+ messages in thread
From: Shawn Guo @ 2020-03-16 1:04 UTC (permalink / raw)
To: Anson Huang
Cc: mark.rutland, devicetree, abel.vesa, daniel.baluta, s.hauer,
linux-kernel, robh+dt, Linux-imx, kernel, leonard.crestez,
festevam, linux-arm-kernel
On Tue, Mar 10, 2020 at 04:52:16PM +0800, Anson Huang wrote:
> Sort the labels alphabetically for consistency.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
It doesn't apply to my branch.
Shawn
> ---
> arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 60 +++++++++++++--------------
> 1 file changed, 30 insertions(+), 30 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> index 13460a3..2ed7aba 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> @@ -30,29 +30,8 @@
> };
> };
>
> -&adma_lpuart0 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_lpuart0>;
> - status = "okay";
> -};
> -
> -&fec1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_fec1>;
> - phy-mode = "rgmii-id";
> - phy-handle = <ðphy0>;
> - fsl,magic-packet;
> +&adma_dsp {
> status = "okay";
> -
> - mdio {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - ethphy0: ethernet-phy@0 {
> - compatible = "ethernet-phy-ieee802.3-c22";
> - reg = <0>;
> - };
> - };
> };
>
> &adma_i2c1 {
> @@ -131,6 +110,35 @@
> };
> };
>
> +&adma_lpuart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lpuart0>;
> + status = "okay";
> +};
> +
> +&fec1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec1>;
> + phy-mode = "rgmii-id";
> + phy-handle = <ðphy0>;
> + fsl,magic-packet;
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy0: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + };
> + };
> +};
> +
> +&scu_key {
> + status = "okay";
> +};
> +
> &usdhc1 {
> assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
> assigned-clock-rates = <200000000>;
> @@ -229,11 +237,3 @@
> >;
> };
> };
> -
> -&adma_dsp {
> - status = "okay";
> -};
> -
> -&scu_key {
> - status = "okay";
> -};
> --
> 2.7.4
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread* RE: [PATCH 1/2] arm64: dts: imx8qxp-mek: Sort labels alphabetically
2020-03-16 1:04 ` [PATCH 1/2] arm64: dts: imx8qxp-mek: Sort labels alphabetically Shawn Guo
@ 2020-03-16 1:11 ` Anson Huang
0 siblings, 0 replies; 8+ messages in thread
From: Anson Huang @ 2020-03-16 1:11 UTC (permalink / raw)
To: Shawn Guo
Cc: mark.rutland, devicetree, Abel Vesa, Daniel Baluta, s.hauer,
linux-kernel, robh+dt, dl-linux-imx, kernel, Leonard Crestez,
festevam, linux-arm-kernel
Hi, Shawn
> Subject: Re: [PATCH 1/2] arm64: dts: imx8qxp-mek: Sort labels alphabetically
>
> On Tue, Mar 10, 2020 at 04:52:16PM +0800, Anson Huang wrote:
> > Sort the labels alphabetically for consistency.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
>
> It doesn't apply to my branch.
I will rebase it and resend the patch series.
Thanks,
Anson
>
> Shawn
>
> > ---
> > arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 60 +++++++++++++-----
> ---------
> > 1 file changed, 30 insertions(+), 30 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> > index 13460a3..2ed7aba 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> > @@ -30,29 +30,8 @@
> > };
> > };
> >
> > -&adma_lpuart0 {
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&pinctrl_lpuart0>;
> > - status = "okay";
> > -};
> > -
> > -&fec1 {
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&pinctrl_fec1>;
> > - phy-mode = "rgmii-id";
> > - phy-handle = <ðphy0>;
> > - fsl,magic-packet;
> > +&adma_dsp {
> > status = "okay";
> > -
> > - mdio {
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > -
> > - ethphy0: ethernet-phy@0 {
> > - compatible = "ethernet-phy-ieee802.3-c22";
> > - reg = <0>;
> > - };
> > - };
> > };
> >
> > &adma_i2c1 {
> > @@ -131,6 +110,35 @@
> > };
> > };
> >
> > +&adma_lpuart0 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_lpuart0>;
> > + status = "okay";
> > +};
> > +
> > +&fec1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_fec1>;
> > + phy-mode = "rgmii-id";
> > + phy-handle = <ðphy0>;
> > + fsl,magic-packet;
> > + status = "okay";
> > +
> > + mdio {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + ethphy0: ethernet-phy@0 {
> > + compatible = "ethernet-phy-ieee802.3-c22";
> > + reg = <0>;
> > + };
> > + };
> > +};
> > +
> > +&scu_key {
> > + status = "okay";
> > +};
> > +
> > &usdhc1 {
> > assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
> > assigned-clock-rates = <200000000>;
> > @@ -229,11 +237,3 @@
> > >;
> > };
> > };
> > -
> > -&adma_dsp {
> > - status = "okay";
> > -};
> > -
> > -&scu_key {
> > - status = "okay";
> > -};
> > --
> > 2.7.4
> >
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/2] arm64: dts: imx8qxp-mek: Sort labels alphabetically
@ 2020-04-17 5:39 Anson Huang
2020-04-18 12:28 ` Aisheng Dong
2020-04-29 2:55 ` Shawn Guo
0 siblings, 2 replies; 8+ messages in thread
From: Anson Huang @ 2020-04-17 5:39 UTC (permalink / raw)
To: robh+dt, shawnguo, s.hauer, kernel, festevam, leonard.crestez,
daniel.baluta, devicetree, linux-arm-kernel, linux-kernel
Cc: Linux-imx
Sort the labels alphabetically for consistency.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 60 +++++++++++++--------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 13460a3..2ed7aba 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -30,29 +30,8 @@
};
};
-&adma_lpuart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lpuart0>;
- status = "okay";
-};
-
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1>;
- phy-mode = "rgmii-id";
- phy-handle = <ðphy0>;
- fsl,magic-packet;
+&adma_dsp {
status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
- };
};
&adma_i2c1 {
@@ -131,6 +110,35 @@
};
};
+&adma_lpuart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart0>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+ };
+};
+
+&scu_key {
+ status = "okay";
+};
+
&usdhc1 {
assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
assigned-clock-rates = <200000000>;
@@ -229,11 +237,3 @@
>;
};
};
-
-&adma_dsp {
- status = "okay";
-};
-
-&scu_key {
- status = "okay";
-};
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 8+ messages in thread* RE: [PATCH 1/2] arm64: dts: imx8qxp-mek: Sort labels alphabetically
2020-04-17 5:39 Anson Huang
@ 2020-04-18 12:28 ` Aisheng Dong
2020-04-18 12:39 ` Anson Huang
2020-04-29 2:55 ` Shawn Guo
1 sibling, 1 reply; 8+ messages in thread
From: Aisheng Dong @ 2020-04-18 12:28 UTC (permalink / raw)
To: Anson Huang, robh+dt, shawnguo, s.hauer, kernel, festevam,
Leonard Crestez, Daniel Baluta, devicetree, linux-arm-kernel,
linux-kernel
Cc: dl-linux-imx
> From: Anson Huang <Anson.Huang@nxp.com>
> Sent: Friday, April 17, 2020 1:39 PM
>
> Sort the labels alphabetically for consistency.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
This patch is meaningless as subsys prefix (e.g. adma_xxx) will be removed later
and devices nodes all moved into subsys dtsi.
I've replied this before:
https://lkml.org/lkml/2020/3/16/244
Regards
Aisheng
> ---
> arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 60
> +++++++++++++--------------
> 1 file changed, 30 insertions(+), 30 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> index 13460a3..2ed7aba 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> @@ -30,29 +30,8 @@
> };
> };
>
> -&adma_lpuart0 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_lpuart0>;
> - status = "okay";
> -};
> -
> -&fec1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_fec1>;
> - phy-mode = "rgmii-id";
> - phy-handle = <ðphy0>;
> - fsl,magic-packet;
> +&adma_dsp {
> status = "okay";
> -
> - mdio {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - ethphy0: ethernet-phy@0 {
> - compatible = "ethernet-phy-ieee802.3-c22";
> - reg = <0>;
> - };
> - };
> };
>
> &adma_i2c1 {
> @@ -131,6 +110,35 @@
> };
> };
>
> +&adma_lpuart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lpuart0>;
> + status = "okay";
> +};
> +
> +&fec1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec1>;
> + phy-mode = "rgmii-id";
> + phy-handle = <ðphy0>;
> + fsl,magic-packet;
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy0: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + };
> + };
> +};
> +
> +&scu_key {
> + status = "okay";
> +};
> +
> &usdhc1 {
> assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
> assigned-clock-rates = <200000000>;
> @@ -229,11 +237,3 @@
> >;
> };
> };
> -
> -&adma_dsp {
> - status = "okay";
> -};
> -
> -&scu_key {
> - status = "okay";
> -};
> --
> 2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread* RE: [PATCH 1/2] arm64: dts: imx8qxp-mek: Sort labels alphabetically
2020-04-18 12:28 ` Aisheng Dong
@ 2020-04-18 12:39 ` Anson Huang
0 siblings, 0 replies; 8+ messages in thread
From: Anson Huang @ 2020-04-18 12:39 UTC (permalink / raw)
To: Aisheng Dong, robh+dt, shawnguo, s.hauer, kernel, festevam,
Leonard Crestez, Daniel Baluta, devicetree, linux-arm-kernel,
linux-kernel
Cc: dl-linux-imx
> Subject: RE: [PATCH 1/2] arm64: dts: imx8qxp-mek: Sort labels alphabetically
>
> > From: Anson Huang <Anson.Huang@nxp.com>
> > Sent: Friday, April 17, 2020 1:39 PM
> >
> > Sort the labels alphabetically for consistency.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
>
> This patch is meaningless as subsys prefix (e.g. adma_xxx) will be removed
> later and devices nodes all moved into subsys dtsi.
> I've replied this before:
> https://lkml.org/lkml/2020/3/16/244
I knew you replied this before, but do you have an exact day of when subsys dtsi will be implemented?
Many previous patches of my mine to add features to DTS file, I have been asked by Shawn to
add a new patch to help sort the labels, I think this is some maintainers' hobby, so if Shawn thinks no
need this for 8QXP, I can drop this patch.
Anson
>
> Regards
> Aisheng
>
> > ---
> > arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 60
> > +++++++++++++--------------
> > 1 file changed, 30 insertions(+), 30 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> > b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> > index 13460a3..2ed7aba 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> > @@ -30,29 +30,8 @@
> > };
> > };
> >
> > -&adma_lpuart0 {
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&pinctrl_lpuart0>;
> > - status = "okay";
> > -};
> > -
> > -&fec1 {
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&pinctrl_fec1>;
> > - phy-mode = "rgmii-id";
> > - phy-handle = <ðphy0>;
> > - fsl,magic-packet;
> > +&adma_dsp {
> > status = "okay";
> > -
> > - mdio {
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > -
> > - ethphy0: ethernet-phy@0 {
> > - compatible = "ethernet-phy-ieee802.3-c22";
> > - reg = <0>;
> > - };
> > - };
> > };
> >
> > &adma_i2c1 {
> > @@ -131,6 +110,35 @@
> > };
> > };
> >
> > +&adma_lpuart0 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_lpuart0>;
> > + status = "okay";
> > +};
> > +
> > +&fec1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_fec1>;
> > + phy-mode = "rgmii-id";
> > + phy-handle = <ðphy0>;
> > + fsl,magic-packet;
> > + status = "okay";
> > +
> > + mdio {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + ethphy0: ethernet-phy@0 {
> > + compatible = "ethernet-phy-ieee802.3-c22";
> > + reg = <0>;
> > + };
> > + };
> > +};
> > +
> > +&scu_key {
> > + status = "okay";
> > +};
> > +
> > &usdhc1 {
> > assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
> > assigned-clock-rates = <200000000>;
> > @@ -229,11 +237,3 @@
> > >;
> > };
> > };
> > -
> > -&adma_dsp {
> > - status = "okay";
> > -};
> > -
> > -&scu_key {
> > - status = "okay";
> > -};
> > --
> > 2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] arm64: dts: imx8qxp-mek: Sort labels alphabetically
2020-04-17 5:39 Anson Huang
2020-04-18 12:28 ` Aisheng Dong
@ 2020-04-29 2:55 ` Shawn Guo
1 sibling, 0 replies; 8+ messages in thread
From: Shawn Guo @ 2020-04-29 2:55 UTC (permalink / raw)
To: Anson Huang
Cc: devicetree, festevam, s.hauer, linux-kernel, robh+dt, Linux-imx,
kernel, leonard.crestez, daniel.baluta, linux-arm-kernel
On Fri, Apr 17, 2020 at 01:39:05PM +0800, Anson Huang wrote:
> Sort the labels alphabetically for consistency.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Applied both, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-04-29 2:55 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-10 8:52 [PATCH 1/2] arm64: dts: imx8qxp-mek: Sort labels alphabetically Anson Huang
2020-03-10 8:52 ` [PATCH 2/2] arm64: dts: imx8qxp-mek: Add PMIC thermal zone support Anson Huang
2020-03-16 1:04 ` [PATCH 1/2] arm64: dts: imx8qxp-mek: Sort labels alphabetically Shawn Guo
2020-03-16 1:11 ` Anson Huang
2020-04-17 5:39 Anson Huang
2020-04-18 12:28 ` Aisheng Dong
2020-04-18 12:39 ` Anson Huang
2020-04-29 2:55 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).