linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Russell King <linux@armlinux.org.uk>
Subject: Re: [RESEND 1/1] arch: arm: mach-at91: pm: Move prototypes to mutually included header
Date: Wed, 3 Mar 2021 14:24:13 +0100	[thread overview]
Message-ID: <YD+N/QVRYbm/Idp3@piout.net> (raw)
In-Reply-To: <20210303124149.3149511-1-lee.jones@linaro.org>

On 03/03/2021 12:41:49+0000, Lee Jones wrote:
> Both the caller and the supplier's source file should have access to
> the include file containing the prototypes.
> 
> Fixes the following W=1 kernel build warning(s):
> 
>  drivers/pinctrl/pinctrl-at91.c:1637:6: warning: no previous prototype for ‘at91_pinctrl_gpio_suspend’ [-Wmissing-prototypes]
>  1637 | void at91_pinctrl_gpio_suspend(void)
>  | ^~~~~~~~~~~~~~~~~~~~~~~~~
>  drivers/pinctrl/pinctrl-at91.c:1661:6: warning: no previous prototype for ‘at91_pinctrl_gpio_resume’ [-Wmissing-prototypes]
>  1661 | void at91_pinctrl_gpio_resume(void)
>  | ^~~~~~~~~~~~~~~~~~~~~~~~
> 
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>

I'm pretty sure you had my ack on v3 ;)

Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

or again, alternatively, I can apply it with Linus' ack

> ---
>  arch/arm/mach-at91/pm.c        | 19 ++++++++-----------
>  drivers/pinctrl/pinctrl-at91.c |  2 ++
>  include/soc/at91/pm.h          | 16 ++++++++++++++++
>  3 files changed, 26 insertions(+), 11 deletions(-)
>  create mode 100644 include/soc/at91/pm.h
> 
> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
> index 120f9aa6fff32..90dcdfe3b3d0d 100644
> --- a/arch/arm/mach-at91/pm.c
> +++ b/arch/arm/mach-at91/pm.c
> @@ -17,6 +17,8 @@
>  #include <linux/clk/at91_pmc.h>
>  #include <linux/platform_data/atmel.h>
>  
> +#include <soc/at91/pm.h>
> +
>  #include <asm/cacheflush.h>
>  #include <asm/fncpy.h>
>  #include <asm/system_misc.h>
> @@ -25,17 +27,6 @@
>  #include "generic.h"
>  #include "pm.h"
>  
> -/*
> - * FIXME: this is needed to communicate between the pinctrl driver and
> - * the PM implementation in the machine. Possibly part of the PM
> - * implementation should be moved down into the pinctrl driver and get
> - * called as part of the generic suspend/resume path.
> - */
> -#ifdef CONFIG_PINCTRL_AT91
> -extern void at91_pinctrl_gpio_suspend(void);
> -extern void at91_pinctrl_gpio_resume(void);
> -#endif
> -
>  struct at91_soc_pm {
>  	int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
>  	int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
> @@ -326,6 +317,12 @@ static void at91_pm_suspend(suspend_state_t state)
>  static int at91_pm_enter(suspend_state_t state)
>  {
>  #ifdef CONFIG_PINCTRL_AT91
> +	/*
> +	 * FIXME: this is needed to communicate between the pinctrl driver and
> +	 * the PM implementation in the machine. Possibly part of the PM
> +	 * implementation should be moved down into the pinctrl driver and get
> +	 * called as part of the generic suspend/resume path.
> +	 */
>  	at91_pinctrl_gpio_suspend();
>  #endif
>  
> diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
> index 8003d1bd16953..fc61aaec34cc9 100644
> --- a/drivers/pinctrl/pinctrl-at91.c
> +++ b/drivers/pinctrl/pinctrl-at91.c
> @@ -23,6 +23,8 @@
>  /* Since we request GPIOs from ourself */
>  #include <linux/pinctrl/consumer.h>
>  
> +#include <soc/at91/pm.h>
> +
>  #include "pinctrl-at91.h"
>  #include "core.h"
>  
> diff --git a/include/soc/at91/pm.h b/include/soc/at91/pm.h
> new file mode 100644
> index 0000000000000..7a41e53a3ffa3
> --- /dev/null
> +++ b/include/soc/at91/pm.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Atmel Power Management
> + *
> + * Copyright (C) 2020 Atmel
> + *
> + * Author: Lee Jones <lee.jones@linaro.org>
> + */
> +
> +#ifndef __SOC_ATMEL_PM_H
> +#define __SOC_ATMEL_PM_H
> +
> +void at91_pinctrl_gpio_suspend(void);
> +void at91_pinctrl_gpio_resume(void);
> +
> +#endif /* __SOC_ATMEL_PM_H */
> -- 
> 2.27.0
> 

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-03-03 19:47 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-03 12:41 [RESEND 1/1] arch: arm: mach-at91: pm: Move prototypes to mutually included header Lee Jones
2021-03-03 13:24 ` Alexandre Belloni [this message]
2021-03-03 14:14   ` Lee Jones
2021-03-24 11:50     ` Linus Walleij
2021-03-26 17:18 ` Alexandre Belloni
2021-03-26 17:34   ` Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YD+N/QVRYbm/Idp3@piout.net \
    --to=alexandre.belloni@bootlin.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=ludovic.desroches@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).