* [PATCH] phy: st: miphy28lp: use _poll_timeout functions for waits
@ 2023-02-10 22:43 Alain Volmat
2023-03-08 8:48 ` Patrice CHOTARD
2023-03-20 12:28 ` Vinod Koul
0 siblings, 2 replies; 3+ messages in thread
From: Alain Volmat @ 2023-02-10 22:43 UTC (permalink / raw)
To: Patrice Chotard, Vinod Koul, Kishon Vijay Abraham I
Cc: Alain Volmat, linux-arm-kernel, linux-phy, linux-kernel
This commit introduces _poll_timeout functions usage instead of
wait loops waiting for a status bit.
Signed-off-by: Alain Volmat <avolmat@me.com>
---
drivers/phy/st/phy-miphy28lp.c | 42 ++++++++--------------------------
1 file changed, 10 insertions(+), 32 deletions(-)
diff --git a/drivers/phy/st/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c
index 068160a34f5c..e30305b77f0d 100644
--- a/drivers/phy/st/phy-miphy28lp.c
+++ b/drivers/phy/st/phy-miphy28lp.c
@@ -9,6 +9,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -484,19 +485,11 @@ static inline void miphy28lp_pcie_config_gen(struct miphy28lp_phy *miphy_phy)
static inline int miphy28lp_wait_compensation(struct miphy28lp_phy *miphy_phy)
{
- unsigned long finish = jiffies + 5 * HZ;
u8 val;
/* Waiting for Compensation to complete */
- do {
- val = readb_relaxed(miphy_phy->base + MIPHY_COMP_FSM_6);
-
- if (time_after_eq(jiffies, finish))
- return -EBUSY;
- cpu_relax();
- } while (!(val & COMP_DONE));
-
- return 0;
+ return readb_relaxed_poll_timeout(miphy_phy->base + MIPHY_COMP_FSM_6,
+ val, val & COMP_DONE, 1, 5 * USEC_PER_SEC);
}
@@ -805,7 +798,6 @@ static inline void miphy28lp_configure_usb3(struct miphy28lp_phy *miphy_phy)
static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy)
{
- unsigned long finish = jiffies + 5 * HZ;
u8 mask = HFC_PLL | HFC_RDY;
u8 val;
@@ -816,21 +808,14 @@ static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy)
if (miphy_phy->type == PHY_TYPE_SATA)
mask |= PHY_RDY;
- do {
- val = readb_relaxed(miphy_phy->base + MIPHY_STATUS_1);
- if ((val & mask) != mask)
- cpu_relax();
- else
- return 0;
- } while (!time_after_eq(jiffies, finish));
-
- return -EBUSY;
+ return readb_relaxed_poll_timeout(miphy_phy->base + MIPHY_STATUS_1,
+ val, (val & mask) == mask, 1,
+ 5 * USEC_PER_SEC);
}
static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy)
{
struct miphy28lp_dev *miphy_dev = miphy_phy->phydev;
- unsigned long finish = jiffies + 5 * HZ;
u32 val;
if (!miphy_phy->osc_rdy)
@@ -839,17 +824,10 @@ static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy)
if (!miphy_phy->syscfg_reg[SYSCFG_STATUS])
return -EINVAL;
- do {
- regmap_read(miphy_dev->regmap,
- miphy_phy->syscfg_reg[SYSCFG_STATUS], &val);
-
- if ((val & MIPHY_OSC_RDY) != MIPHY_OSC_RDY)
- cpu_relax();
- else
- return 0;
- } while (!time_after_eq(jiffies, finish));
-
- return -EBUSY;
+ return regmap_read_poll_timeout(miphy_dev->regmap,
+ miphy_phy->syscfg_reg[SYSCFG_STATUS],
+ val, val & MIPHY_OSC_RDY, 1,
+ 5 * USEC_PER_SEC);
}
static int miphy28lp_get_resource_byname(struct device_node *child,
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] phy: st: miphy28lp: use _poll_timeout functions for waits
2023-02-10 22:43 [PATCH] phy: st: miphy28lp: use _poll_timeout functions for waits Alain Volmat
@ 2023-03-08 8:48 ` Patrice CHOTARD
2023-03-20 12:28 ` Vinod Koul
1 sibling, 0 replies; 3+ messages in thread
From: Patrice CHOTARD @ 2023-03-08 8:48 UTC (permalink / raw)
To: Alain Volmat, Vinod Koul, Kishon Vijay Abraham I
Cc: linux-arm-kernel, linux-phy, linux-kernel
Hi Alain
On 2/10/23 23:43, Alain Volmat wrote:
> This commit introduces _poll_timeout functions usage instead of
> wait loops waiting for a status bit.
>
> Signed-off-by: Alain Volmat <avolmat@me.com>
> ---
> drivers/phy/st/phy-miphy28lp.c | 42 ++++++++--------------------------
> 1 file changed, 10 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/phy/st/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c
> index 068160a34f5c..e30305b77f0d 100644
> --- a/drivers/phy/st/phy-miphy28lp.c
> +++ b/drivers/phy/st/phy-miphy28lp.c
> @@ -9,6 +9,7 @@
>
> #include <linux/platform_device.h>
> #include <linux/io.h>
> +#include <linux/iopoll.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/of.h>
> @@ -484,19 +485,11 @@ static inline void miphy28lp_pcie_config_gen(struct miphy28lp_phy *miphy_phy)
>
> static inline int miphy28lp_wait_compensation(struct miphy28lp_phy *miphy_phy)
> {
> - unsigned long finish = jiffies + 5 * HZ;
> u8 val;
>
> /* Waiting for Compensation to complete */
> - do {
> - val = readb_relaxed(miphy_phy->base + MIPHY_COMP_FSM_6);
> -
> - if (time_after_eq(jiffies, finish))
> - return -EBUSY;
> - cpu_relax();
> - } while (!(val & COMP_DONE));
> -
> - return 0;
> + return readb_relaxed_poll_timeout(miphy_phy->base + MIPHY_COMP_FSM_6,
> + val, val & COMP_DONE, 1, 5 * USEC_PER_SEC);
> }
>
>
> @@ -805,7 +798,6 @@ static inline void miphy28lp_configure_usb3(struct miphy28lp_phy *miphy_phy)
>
> static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy)
> {
> - unsigned long finish = jiffies + 5 * HZ;
> u8 mask = HFC_PLL | HFC_RDY;
> u8 val;
>
> @@ -816,21 +808,14 @@ static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy)
> if (miphy_phy->type == PHY_TYPE_SATA)
> mask |= PHY_RDY;
>
> - do {
> - val = readb_relaxed(miphy_phy->base + MIPHY_STATUS_1);
> - if ((val & mask) != mask)
> - cpu_relax();
> - else
> - return 0;
> - } while (!time_after_eq(jiffies, finish));
> -
> - return -EBUSY;
> + return readb_relaxed_poll_timeout(miphy_phy->base + MIPHY_STATUS_1,
> + val, (val & mask) == mask, 1,
> + 5 * USEC_PER_SEC);
> }
>
> static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy)
> {
> struct miphy28lp_dev *miphy_dev = miphy_phy->phydev;
> - unsigned long finish = jiffies + 5 * HZ;
> u32 val;
>
> if (!miphy_phy->osc_rdy)
> @@ -839,17 +824,10 @@ static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy)
> if (!miphy_phy->syscfg_reg[SYSCFG_STATUS])
> return -EINVAL;
>
> - do {
> - regmap_read(miphy_dev->regmap,
> - miphy_phy->syscfg_reg[SYSCFG_STATUS], &val);
> -
> - if ((val & MIPHY_OSC_RDY) != MIPHY_OSC_RDY)
> - cpu_relax();
> - else
> - return 0;
> - } while (!time_after_eq(jiffies, finish));
> -
> - return -EBUSY;
> + return regmap_read_poll_timeout(miphy_dev->regmap,
> + miphy_phy->syscfg_reg[SYSCFG_STATUS],
> + val, val & MIPHY_OSC_RDY, 1,
> + 5 * USEC_PER_SEC);
> }
>
> static int miphy28lp_get_resource_byname(struct device_node *child,
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Thanks
Patrice
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] phy: st: miphy28lp: use _poll_timeout functions for waits
2023-02-10 22:43 [PATCH] phy: st: miphy28lp: use _poll_timeout functions for waits Alain Volmat
2023-03-08 8:48 ` Patrice CHOTARD
@ 2023-03-20 12:28 ` Vinod Koul
1 sibling, 0 replies; 3+ messages in thread
From: Vinod Koul @ 2023-03-20 12:28 UTC (permalink / raw)
To: Alain Volmat
Cc: Patrice Chotard, Kishon Vijay Abraham I, linux-arm-kernel,
linux-phy, linux-kernel
On 10-02-23, 23:43, Alain Volmat wrote:
> This commit introduces _poll_timeout functions usage instead of
> wait loops waiting for a status bit.
Applied, thanks
--
~Vinod
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-03-20 12:29 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-02-10 22:43 [PATCH] phy: st: miphy28lp: use _poll_timeout functions for waits Alain Volmat
2023-03-08 8:48 ` Patrice CHOTARD
2023-03-20 12:28 ` Vinod Koul
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).