[PATCH v4 0/8] mfd: Add OF device table to I2C drivers that are missing it

[PATCH v4 0/8] mfd: Add OF device table to I2C drivers that are missing it

[Javier Martinez Canillas]

Hello,

This series add OF device ID tables to mfd I2C drivers whose devices are
either used in Device Tree source files or are listed in binding docs as
a compatible string.

That's done because the plan is to change the I2C core to report proper OF
modaliases instead of always reporting a MODALIAS=i2c:<foo> regardless if
a device was registered via DT or using the legacy platform data mechanism.

So these patches will make sure that mfd I2C drivers modules will continue
to be autoloaded once the I2C core is changed to report proper OF modalias.

Users didn't have a vendor prefix in the used compatible strings, but since
there wasn't a DT binding document for these drivers, it can be said that
were working for mere luck and so this series fixes the users and add a DT
binding doc for the drivers.

Most patches can be applied independently, with the exception of patches
2 to 4 that should be applied in the same tree to keep bisect-ability.

Best regards,
Javier

Changes in v4:
- Use "dt-bindings: mfd:" prefix in subject line (Rob Herring).
- Add information about what functions the device serve (Lee Jones).
- Avoid using MFD in Device Tree (Lee Jones).
- Drop -mfd suffix in compatible string (Lee Jones).
- Avoid using MFD in Device Tree (Lee Jones).
- Use "dt-bindings: mfd:" prefix in subject line (Rob Herring).
- Add information about what functions the device serve (Lee Jones).

Changes in v3:
- Add a vendor prefix to the compatible string (Rob Herring).
- Add a vendor prefix to the compatible string (Rob Herring).

Changes in v2:
- Don't use of_match_ptr() to avoid build warning when CONFIG_OF is disabled.
- Don't use of_match_ptr() to avoid build warning when CONFIG_OF is disabled.

Javier Martinez Canillas (8):
  dt-bindings: mfd: Add retu/tahvo ASIC chips bindings
  mfd: retu: Drop -mfd suffix from I2C device ID name
  mfd: retu: Add OF device ID table
  ARM: dts: n8x0: Add vendor prefix to retu node
  i2c: i2c-cbus-gpio: Add vendor prefix to retu node in example
  dt-bindings: mfd: Add TI tps6105x chip bindings
  mfd: tps6105x: Add OF device ID table
  ARM: ux500: Add vendor prefix to tps61052 node

 .../devicetree/bindings/i2c/i2c-cbus-gpio.txt       |  4 ++--
 Documentation/devicetree/bindings/mfd/retu.txt      | 21 +++++++++++++++++++++
 Documentation/devicetree/bindings/mfd/tps6105x.txt  | 17 +++++++++++++++++
 arch/arm/boot/dts/omap2420-n8x0-common.dtsi         |  4 ++--
 arch/arm/boot/dts/ste-hrefprev60.dtsi               |  2 +-
 arch/arm/mach-omap1/board-nokia770.c                |  4 ++--
 drivers/mfd/retu-mfd.c                              | 12 ++++++++++--
 drivers/mfd/tps6105x.c                              |  8 ++++++++
 8 files changed, 63 insertions(+), 9 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/retu.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/tps6105x.txt

-- 
2.9.3

[PATCH v4 2/8] mfd: retu: Drop -mfd suffix from I2C device ID name

[Javier Martinez Canillas]

It's not correct to encode the subsystem in the I2C device name, so
drop the -mfd suffix. To maintain bisect-ability, change driver and
platform code / DTS users in the same patch.

Suggested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/arm/boot/dts/omap2420-n8x0-common.dtsi | 4 ++--
 arch/arm/mach-omap1/board-nokia770.c        | 4 ++--
 drivers/mfd/retu-mfd.c                      | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
index 7e5ffc583c90..1b06430c8013 100644
--- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
+++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
@@ -15,8 +15,8 @@
 				>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			retu_mfd: retu at 1 {
-				compatible = "retu-mfd";
+			retu: retu at 1 {
+				compatible = "retu";
 				interrupt-parent = <&gpio4>;
 				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
 				reg = <0x1>;
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index ee8d9f553db4..06243c0b12d2 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -233,10 +233,10 @@ static struct platform_device nokia770_cbus_device = {
 
 static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = {
 	{
-		I2C_BOARD_INFO("retu-mfd", 0x01),
+		I2C_BOARD_INFO("retu", 0x01),
 	},
 	{
-		I2C_BOARD_INFO("tahvo-mfd", 0x02),
+		I2C_BOARD_INFO("tahvo", 0x02),
 	},
 };
 
diff --git a/drivers/mfd/retu-mfd.c b/drivers/mfd/retu-mfd.c
index d4c114abeb75..53e1d386d2c0 100644
--- a/drivers/mfd/retu-mfd.c
+++ b/drivers/mfd/retu-mfd.c
@@ -302,8 +302,8 @@ static int retu_remove(struct i2c_client *i2c)
 }
 
 static const struct i2c_device_id retu_id[] = {
-	{ "retu-mfd", 0 },
-	{ "tahvo-mfd", 0 },
+	{ "retu", 0 },
+	{ "tahvo", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, retu_id);
-- 
2.9.3

[PATCH v4 4/8] ARM: dts: n8x0: Add vendor prefix to retu node

[Javier Martinez Canillas]

The retu device node doesn't have a vendor prefix
in its compatible string, fix it by adding one.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/arm/boot/dts/omap2420-n8x0-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
index 1b06430c8013..91886231e5a8 100644
--- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
+++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
@@ -16,7 +16,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			retu: retu at 1 {
-				compatible = "retu";
+				compatible = "nokia,retu";
 				interrupt-parent = <&gpio4>;
 				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
 				reg = <0x1>;
-- 
2.9.3

[PATCH v4 8/8] ARM: ux500: Add vendor prefix to tps61052 node

[Javier Martinez Canillas]

The tps61052 device node doesn't have a vendor prefix
in its compatible string, fix it by adding one.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/arm/boot/dts/ste-hrefprev60.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index 5882a2606ac3..3f14b4df69b4 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -30,7 +30,7 @@
 
 		i2c at 80004000 {
 			tps61052 at 33 {
-				compatible = "tps61052";
+				compatible = "ti,tps61052";
 				reg = <0x33>;
 			};
 
-- 
2.9.3

[PATCH v4 0/8] mfd: Add OF device table to I2C drivers that are missing it

[Rob Herring]

On Tue, Apr 4, 2017 at 10:30 AM, Javier Martinez Canillas
<javier@osg.samsung.com> wrote:
> Hello,
>
> This series add OF device ID tables to mfd I2C drivers whose devices are
> either used in Device Tree source files or are listed in binding docs as
> a compatible string.

For the series,

Acked-by: Rob Herring <robh@kernel.org>

[PATCH v4 0/8] mfd: Add OF device table to I2C drivers that are missing it

[Aaro Koskinen]

Hi,

On Tue, Apr 04, 2017 at 11:30:28AM -0400, Javier Martinez Canillas wrote:
> This series add OF device ID tables to mfd I2C drivers whose devices are
> either used in Device Tree source files or are listed in binding docs as
> a compatible string.

For patches 1-5 you can add:

Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>

A.

[PATCH v4 0/8] mfd: Add OF device table to I2C drivers that are missing it

[Tony Lindgren]

* Javier Martinez Canillas <javier@osg.samsung.com> [170404 08:33]:
> Most patches can be applied independently, with the exception of patches
> 2 to 4 that should be applied in the same tree to keep bisect-ability.

Probably best to merge this all via MFD or i2c:

Acked-by: Tony Lindgren <tony@atomide.com>

[PATCH v4 0/8] mfd: Add OF device table to I2C drivers that are missing it

[Javier Martinez Canillas]

Hello Tony,

On 04/04/2017 01:43 PM, Tony Lindgren wrote:
> * Javier Martinez Canillas <javier@osg.samsung.com> [170404 08:33]:
>> Most patches can be applied independently, with the exception of patches
>> 2 to 4 that should be applied in the same tree to keep bisect-ability.
> 
> Probably best to merge this all via MFD or i2c:
>

I would prefer MFD since the changes in that subsystem are the ones that
could cause issues. The changes for I2C is just a update to an example.
 
> Acked-by: Tony Lindgren <tony@atomide.com>
>

Thanks!

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

[PATCH v4 2/8] mfd: retu: Drop -mfd suffix from I2C device ID name

[Lee Jones]

On Tue, 04 Apr 2017, Javier Martinez Canillas wrote:

> It's not correct to encode the subsystem in the I2C device name, so
> drop the -mfd suffix. To maintain bisect-ability, change driver and
> platform code / DTS users in the same patch.
> 
> Suggested-by: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> 
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
> 
>  arch/arm/boot/dts/omap2420-n8x0-common.dtsi | 4 ++--
>  arch/arm/mach-omap1/board-nokia770.c        | 4 ++--
>  drivers/mfd/retu-mfd.c                      | 4 ++--
>  3 files changed, 6 insertions(+), 6 deletions(-)

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
> index 7e5ffc583c90..1b06430c8013 100644
> --- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
> +++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
> @@ -15,8 +15,8 @@
>  				>;
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> -			retu_mfd: retu at 1 {
> -				compatible = "retu-mfd";
> +			retu: retu at 1 {
> +				compatible = "retu";
>  				interrupt-parent = <&gpio4>;
>  				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
>  				reg = <0x1>;
> diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
> index ee8d9f553db4..06243c0b12d2 100644
> --- a/arch/arm/mach-omap1/board-nokia770.c
> +++ b/arch/arm/mach-omap1/board-nokia770.c
> @@ -233,10 +233,10 @@ static struct platform_device nokia770_cbus_device = {
>  
>  static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = {
>  	{
> -		I2C_BOARD_INFO("retu-mfd", 0x01),
> +		I2C_BOARD_INFO("retu", 0x01),
>  	},
>  	{
> -		I2C_BOARD_INFO("tahvo-mfd", 0x02),
> +		I2C_BOARD_INFO("tahvo", 0x02),
>  	},
>  };
>  
> diff --git a/drivers/mfd/retu-mfd.c b/drivers/mfd/retu-mfd.c
> index d4c114abeb75..53e1d386d2c0 100644
> --- a/drivers/mfd/retu-mfd.c
> +++ b/drivers/mfd/retu-mfd.c
> @@ -302,8 +302,8 @@ static int retu_remove(struct i2c_client *i2c)
>  }
>  
>  static const struct i2c_device_id retu_id[] = {
> -	{ "retu-mfd", 0 },
> -	{ "tahvo-mfd", 0 },
> +	{ "retu", 0 },
> +	{ "tahvo", 0 },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(i2c, retu_id);

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog