linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Konrad Dybcio <konrad.dybcio@somainline.org>
To: AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	robh+dt@kernel.org
Cc: krzysztof.kozlowski+dt@linaro.org, vkoul@kernel.org,
	chaotian.jing@mediatek.com, ulf.hansson@linaro.org,
	matthias.bgg@gmail.com, hsinyi@chromium.org,
	nfraprado@collabora.com, allen-kh.cheng@mediatek.com,
	fparent@baylibre.com, sam.shih@mediatek.com,
	sean.wang@mediatek.com, long.cheng@mediatek.com,
	wenbin.mei@mediatek.com, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, dmaengine@vger.kernel.org,
	linux-mmc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, phone-devel@vger.kernel.org,
	~postmarketos/upstreaming@lists.sr.ht
Subject: Re: [PATCH 7/7] arm64: dts: mediatek: Add support for MT6795 Sony Xperia M5 smartphone
Date: Fri, 29 Jul 2022 14:00:02 +0200	[thread overview]
Message-ID: <a8fa9e22-8c3f-60b2-a0db-01cfd5c37765@somainline.org> (raw)
In-Reply-To: <20220729104441.39177-8-angelogioacchino.delregno@collabora.com>



On 29.07.2022 12:44, AngeloGioacchino Del Regno wrote:
> Add a basic support for the Sony Xperia M5 (codename "Holly")
> smartphone, powered by a MediaTek Helio X10 SoC.
> 
> This achieves a console boot.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
>  arch/arm64/boot/dts/mediatek/Makefile         |  1 +
>  .../dts/mediatek/mt6795-sony-xperia-m5.dts    | 90 +++++++++++++++++++
>  2 files changed, 91 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
> 
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index af362a085a02..72fd683c9264 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-sony-xperia-m5.dtb
-holly.dtb?

>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
> new file mode 100644
> index 000000000000..94d011c4126c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
> @@ -0,0 +1,90 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022, Collabora Ltd
> + * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> + */
> +
> +/dts-v1/;
> +#include "mt6795.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
Looks unused.

> +
> +/ {
> +	model = "Sony Xperia M5";
> +	compatible = "sony,xperia-m5", "mediatek,mt6795";
sony,holly?

> +	chassis-type = "handset";
> +
> +	aliases {
> +		mmc0 = &mmc0;
> +		mmc1 = &mmc1;
> +		serial0 = &uart0;
> +		serial1 = &uart1;
> +	};
> +
> +	memory@40000000 {
> +		device_type = "memory";
> +		reg = <0 0x40000000 0 0x1E800000>;
Lowercase hex in size. Also, doesn't the bootloader fill it in?

> +	};
> +
> +	reserved_memory: reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
Is that true for all devices with this SoC, or..? If so, it may be worth
moving this into mt6795.dtsi.

> +		bl31_secmon_reserved: secmon@43000000 {
memory@, everywhere. Use labels to name the nodes.

> +			no-map;
reg goes first.
> +			reg = <0 0x43000000 0 0x30000>;
> +		};
> +
> +		/* preloader and bootloader regions cannot be touched */
> +		preloader-region@44800000 {
> +			no-map;
> +			reg = <0 0x44800000 0 0x100000>;
> +		};
> +
> +		bootloader-region@46000000 {
> +			no-map;
> +			reg = <0 0x46000000 0 0x400000>;
> +		};
> +	};
> +};
> +
> +&pio {
> +	uart0_pins: uart0-pins {
> +		pins-rx {
> +			pinmux = <PINMUX_GPIO113__FUNC_URXD0>;
> +			bias-pull-up;
> +			input-enable;
> +		};
> +		pins-tx {
> +			pinmux = <PINMUX_GPIO114__FUNC_UTXD0>;
> +			output-high;
> +		};
> +	};
> +
> +	uart2_pins: uart2-pins {
> +		pins-rx {
> +			pinmux = <PINMUX_GPIO31__FUNC_URXD2>;
> +			bias-pull-up;
> +			input-enable;
> +		};
> +		pins-tx {
> +			pinmux = <PINMUX_GPIO32__FUNC_UTXD2>;
> +		};
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
Status last here and below, please.

Konrad
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_pins>;
> +};
> +
> +&uart2 {
> +	status = "okay";
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart2_pins>;
> +};
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-07-29 12:01 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-29 10:44 [PATCH 0/8] MT6795 Devicetrees and Sony Xperia M5 AngeloGioacchino Del Regno
2022-07-29 10:44 ` [PATCH 1/8] dt-bindings: dma: mediatek,uart-dma: Add binding for MT6795 SoC AngeloGioacchino Del Regno
2022-08-02  7:34   ` Krzysztof Kozlowski
2022-09-04 17:26   ` Vinod Koul
2022-07-29 10:44 ` [PATCH 2/8] dt-bindings: mmc: Add compatible for MT6795 Helio X10 SoC AngeloGioacchino Del Regno
2022-07-29 23:05   ` Rob Herring
2022-08-15 18:28   ` Ulf Hansson
2022-07-29 10:44 ` [PATCH 3/8] arm64: dts: mediatek: mt6795: Add topckgen, infra, peri clocks/resets AngeloGioacchino Del Regno
2022-07-29 10:44 ` [PATCH 4/8] arm64: dts: mediatek: mt6795: Replace UART dummy clocks with pericfg AngeloGioacchino Del Regno
2022-07-29 10:44 ` [PATCH 5/8] arm64: dts: mediatek: mt6795: Add support for APDMA and wire up UART DMAs AngeloGioacchino Del Regno
2022-07-29 10:44 ` [PATCH 6/8] arm64: dts: mediatek: mt6795: Add support for eMMC/SD/SDIO controllers AngeloGioacchino Del Regno
2022-07-29 10:44 ` [PATCH 7/7] arm64: dts: mediatek: Add support for MT6795 Sony Xperia M5 smartphone AngeloGioacchino Del Regno
2022-07-29 12:00   ` Konrad Dybcio [this message]
2022-10-27  9:28     ` AngeloGioacchino Del Regno
2022-10-27  9:40       ` Konrad Dybcio
2022-10-27 10:01         ` AngeloGioacchino Del Regno
2022-07-29 10:44 ` [PATCH 7/8] dt-bindings: arm: mediatek: Add compatible for MT6795 Sony Xperia M5 AngeloGioacchino Del Regno
2022-07-29 23:05   ` Rob Herring
2022-07-29 10:44 ` [PATCH 8/8] arm64: dts: mediatek: Add support for MT6795 Sony Xperia M5 smartphone AngeloGioacchino Del Regno

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a8fa9e22-8c3f-60b2-a0db-01cfd5c37765@somainline.org \
    --to=konrad.dybcio@somainline.org \
    --cc=allen-kh.cheng@mediatek.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=chaotian.jing@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=fparent@baylibre.com \
    --cc=hsinyi@chromium.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=long.cheng@mediatek.com \
    --cc=matthias.bgg@gmail.com \
    --cc=nfraprado@collabora.com \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sam.shih@mediatek.com \
    --cc=sean.wang@mediatek.com \
    --cc=ulf.hansson@linaro.org \
    --cc=vkoul@kernel.org \
    --cc=wenbin.mei@mediatek.com \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).