* [PATCH 0/2] spi: stm32-qspi: rework probe error path
@ 2020-02-03 13:50 patrice.chotard
2020-02-03 13:50 ` [PATCH 1/2] spi: stm32-qspi: defer probe for reset controller patrice.chotard
2020-02-03 13:50 ` [PATCH 2/2] spi: stm32-qspi: properly manage probe errors patrice.chotard
0 siblings, 2 replies; 5+ messages in thread
From: patrice.chotard @ 2020-02-03 13:50 UTC (permalink / raw)
To: Mark Brown, Maxime Coquelin, Alexandre Torgue, linux-spi,
linux-stm32, linux-arm-kernel, linux-kernel
Cc: christophe.kerello, patrice.chotard
From: Patrice Chotard <patrice.chotard@st.com>
This series is fixing the probe error path of spi-stm32-qspi driver:
- it allows to defer probe if reset controller driver is not yet probed.
- if fixes the error path in releasing only allocated ressouces in case of error.
Etienne Carriere (1):
spi: stm32-qspi: defer probe for reset controller
Lionel Debieve (1):
spi: stm32-qspi: properly manage probe errors
drivers/spi/spi-stm32-qspi.c | 31 +++++++++++++++++++------------
1 file changed, 19 insertions(+), 12 deletions(-)
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] spi: stm32-qspi: defer probe for reset controller
2020-02-03 13:50 [PATCH 0/2] spi: stm32-qspi: rework probe error path patrice.chotard
@ 2020-02-03 13:50 ` patrice.chotard
2020-02-11 15:51 ` Applied "spi: stm32-qspi: defer probe for reset controller" to the spi tree Mark Brown
2020-02-03 13:50 ` [PATCH 2/2] spi: stm32-qspi: properly manage probe errors patrice.chotard
1 sibling, 1 reply; 5+ messages in thread
From: patrice.chotard @ 2020-02-03 13:50 UTC (permalink / raw)
To: Mark Brown, Maxime Coquelin, Alexandre Torgue, linux-spi,
linux-stm32, linux-arm-kernel, linux-kernel
Cc: Etienne Carriere, christophe.kerello, patrice.chotard
From: Etienne Carriere <etienne.carriere@st.com>
Changes stm32 QSPI driver to defer its probe operation when a reset
controller device have not yet probed but is registered in the
system.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---
drivers/spi/spi-stm32-qspi.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
index 4ef569b47aa6..13bb64bf4c8f 100644
--- a/drivers/spi/spi-stm32-qspi.c
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -615,7 +615,11 @@ static int stm32_qspi_probe(struct platform_device *pdev)
}
rstc = devm_reset_control_get_exclusive(dev, NULL);
- if (!IS_ERR(rstc)) {
+ if (IS_ERR(rstc)) {
+ ret = PTR_ERR(rstc);
+ if (ret == -EPROBE_DEFER)
+ goto err;
+ } else {
reset_control_assert(rstc);
udelay(2);
reset_control_deassert(rstc);
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] spi: stm32-qspi: properly manage probe errors
2020-02-03 13:50 [PATCH 0/2] spi: stm32-qspi: rework probe error path patrice.chotard
2020-02-03 13:50 ` [PATCH 1/2] spi: stm32-qspi: defer probe for reset controller patrice.chotard
@ 2020-02-03 13:50 ` patrice.chotard
2020-02-11 15:51 ` Applied "spi: stm32-qspi: properly manage probe errors" to the spi tree Mark Brown
1 sibling, 1 reply; 5+ messages in thread
From: patrice.chotard @ 2020-02-03 13:50 UTC (permalink / raw)
To: Mark Brown, Maxime Coquelin, Alexandre Torgue, linux-spi,
linux-stm32, linux-arm-kernel, linux-kernel
Cc: Lionel Debieve, Etienne Carriere, christophe.kerello, patrice.chotard
From: Lionel Debieve <lionel.debieve@st.com>
Fix resource release issues when driver probe operation fails.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---
drivers/spi/spi-stm32-qspi.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
index 13bb64bf4c8f..d066f5144c3e 100644
--- a/drivers/spi/spi-stm32-qspi.c
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -565,7 +565,7 @@ static int stm32_qspi_probe(struct platform_device *pdev)
qspi->io_base = devm_ioremap_resource(dev, res);
if (IS_ERR(qspi->io_base)) {
ret = PTR_ERR(qspi->io_base);
- goto err;
+ goto err_master_put;
}
qspi->phys_base = res->start;
@@ -574,24 +574,26 @@ static int stm32_qspi_probe(struct platform_device *pdev)
qspi->mm_base = devm_ioremap_resource(dev, res);
if (IS_ERR(qspi->mm_base)) {
ret = PTR_ERR(qspi->mm_base);
- goto err;
+ goto err_master_put;
}
qspi->mm_size = resource_size(res);
if (qspi->mm_size > STM32_QSPI_MAX_MMAP_SZ) {
ret = -EINVAL;
- goto err;
+ goto err_master_put;
}
irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
+ if (irq < 0) {
+ ret = irq;
+ goto err_master_put;
+ }
ret = devm_request_irq(dev, irq, stm32_qspi_irq, 0,
dev_name(dev), qspi);
if (ret) {
dev_err(dev, "failed to request irq\n");
- goto err;
+ goto err_master_put;
}
init_completion(&qspi->data_completion);
@@ -599,26 +601,26 @@ static int stm32_qspi_probe(struct platform_device *pdev)
qspi->clk = devm_clk_get(dev, NULL);
if (IS_ERR(qspi->clk)) {
ret = PTR_ERR(qspi->clk);
- goto err;
+ goto err_master_put;
}
qspi->clk_rate = clk_get_rate(qspi->clk);
if (!qspi->clk_rate) {
ret = -EINVAL;
- goto err;
+ goto err_master_put;
}
ret = clk_prepare_enable(qspi->clk);
if (ret) {
dev_err(dev, "can not enable the clock\n");
- goto err;
+ goto err_master_put;
}
rstc = devm_reset_control_get_exclusive(dev, NULL);
if (IS_ERR(rstc)) {
ret = PTR_ERR(rstc);
if (ret == -EPROBE_DEFER)
- goto err;
+ goto err_qspi_release;
} else {
reset_control_assert(rstc);
udelay(2);
@@ -629,7 +631,7 @@ static int stm32_qspi_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, qspi);
ret = stm32_qspi_dma_setup(qspi);
if (ret)
- goto err;
+ goto err_qspi_release;
mutex_init(&qspi->lock);
@@ -645,8 +647,9 @@ static int stm32_qspi_probe(struct platform_device *pdev)
if (!ret)
return 0;
-err:
+err_qspi_release:
stm32_qspi_release(qspi);
+err_master_put:
spi_master_put(qspi->ctrl);
return ret;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Applied "spi: stm32-qspi: properly manage probe errors" to the spi tree
2020-02-03 13:50 ` [PATCH 2/2] spi: stm32-qspi: properly manage probe errors patrice.chotard
@ 2020-02-11 15:51 ` Mark Brown
0 siblings, 0 replies; 5+ messages in thread
From: Mark Brown @ 2020-02-11 15:51 UTC (permalink / raw)
To: Lionel Debieve
Cc: Etienne Carriere, christophe.kerello, Alexandre Torgue,
linux-kernel, linux-spi, patrice.chotard, Mark Brown,
Maxime Coquelin, linux-stm32, linux-arm-kernel
The patch
spi: stm32-qspi: properly manage probe errors
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.7
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 4a08d6c8662472121b0ddc29180ab3c94c34f586 Mon Sep 17 00:00:00 2001
From: Lionel Debieve <lionel.debieve@st.com>
Date: Mon, 3 Feb 2020 14:50:48 +0100
Subject: [PATCH] spi: stm32-qspi: properly manage probe errors
Fix resource release issues when driver probe operation fails.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Link: https://lore.kernel.org/r/20200203135048.1299-3-patrice.chotard@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/spi-stm32-qspi.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
index 13bb64bf4c8f..d066f5144c3e 100644
--- a/drivers/spi/spi-stm32-qspi.c
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -565,7 +565,7 @@ static int stm32_qspi_probe(struct platform_device *pdev)
qspi->io_base = devm_ioremap_resource(dev, res);
if (IS_ERR(qspi->io_base)) {
ret = PTR_ERR(qspi->io_base);
- goto err;
+ goto err_master_put;
}
qspi->phys_base = res->start;
@@ -574,24 +574,26 @@ static int stm32_qspi_probe(struct platform_device *pdev)
qspi->mm_base = devm_ioremap_resource(dev, res);
if (IS_ERR(qspi->mm_base)) {
ret = PTR_ERR(qspi->mm_base);
- goto err;
+ goto err_master_put;
}
qspi->mm_size = resource_size(res);
if (qspi->mm_size > STM32_QSPI_MAX_MMAP_SZ) {
ret = -EINVAL;
- goto err;
+ goto err_master_put;
}
irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
+ if (irq < 0) {
+ ret = irq;
+ goto err_master_put;
+ }
ret = devm_request_irq(dev, irq, stm32_qspi_irq, 0,
dev_name(dev), qspi);
if (ret) {
dev_err(dev, "failed to request irq\n");
- goto err;
+ goto err_master_put;
}
init_completion(&qspi->data_completion);
@@ -599,26 +601,26 @@ static int stm32_qspi_probe(struct platform_device *pdev)
qspi->clk = devm_clk_get(dev, NULL);
if (IS_ERR(qspi->clk)) {
ret = PTR_ERR(qspi->clk);
- goto err;
+ goto err_master_put;
}
qspi->clk_rate = clk_get_rate(qspi->clk);
if (!qspi->clk_rate) {
ret = -EINVAL;
- goto err;
+ goto err_master_put;
}
ret = clk_prepare_enable(qspi->clk);
if (ret) {
dev_err(dev, "can not enable the clock\n");
- goto err;
+ goto err_master_put;
}
rstc = devm_reset_control_get_exclusive(dev, NULL);
if (IS_ERR(rstc)) {
ret = PTR_ERR(rstc);
if (ret == -EPROBE_DEFER)
- goto err;
+ goto err_qspi_release;
} else {
reset_control_assert(rstc);
udelay(2);
@@ -629,7 +631,7 @@ static int stm32_qspi_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, qspi);
ret = stm32_qspi_dma_setup(qspi);
if (ret)
- goto err;
+ goto err_qspi_release;
mutex_init(&qspi->lock);
@@ -645,8 +647,9 @@ static int stm32_qspi_probe(struct platform_device *pdev)
if (!ret)
return 0;
-err:
+err_qspi_release:
stm32_qspi_release(qspi);
+err_master_put:
spi_master_put(qspi->ctrl);
return ret;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Applied "spi: stm32-qspi: defer probe for reset controller" to the spi tree
2020-02-03 13:50 ` [PATCH 1/2] spi: stm32-qspi: defer probe for reset controller patrice.chotard
@ 2020-02-11 15:51 ` Mark Brown
0 siblings, 0 replies; 5+ messages in thread
From: Mark Brown @ 2020-02-11 15:51 UTC (permalink / raw)
To: Etienne Carriere
Cc: christophe.kerello, Alexandre Torgue, linux-kernel, linux-spi,
patrice.chotard, Mark Brown, Maxime Coquelin, linux-stm32,
linux-arm-kernel
The patch
spi: stm32-qspi: defer probe for reset controller
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.7
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 8196f7bcc2adf21f83d82691d537fcef7abaa1c7 Mon Sep 17 00:00:00 2001
From: Etienne Carriere <etienne.carriere@st.com>
Date: Mon, 3 Feb 2020 14:50:47 +0100
Subject: [PATCH] spi: stm32-qspi: defer probe for reset controller
Changes stm32 QSPI driver to defer its probe operation when a reset
controller device have not yet probed but is registered in the
system.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Link: https://lore.kernel.org/r/20200203135048.1299-2-patrice.chotard@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/spi-stm32-qspi.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
index 4ef569b47aa6..13bb64bf4c8f 100644
--- a/drivers/spi/spi-stm32-qspi.c
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -615,7 +615,11 @@ static int stm32_qspi_probe(struct platform_device *pdev)
}
rstc = devm_reset_control_get_exclusive(dev, NULL);
- if (!IS_ERR(rstc)) {
+ if (IS_ERR(rstc)) {
+ ret = PTR_ERR(rstc);
+ if (ret == -EPROBE_DEFER)
+ goto err;
+ } else {
reset_control_assert(rstc);
udelay(2);
reset_control_deassert(rstc);
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-02-11 15:52 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-03 13:50 [PATCH 0/2] spi: stm32-qspi: rework probe error path patrice.chotard
2020-02-03 13:50 ` [PATCH 1/2] spi: stm32-qspi: defer probe for reset controller patrice.chotard
2020-02-11 15:51 ` Applied "spi: stm32-qspi: defer probe for reset controller" to the spi tree Mark Brown
2020-02-03 13:50 ` [PATCH 2/2] spi: stm32-qspi: properly manage probe errors patrice.chotard
2020-02-11 15:51 ` Applied "spi: stm32-qspi: properly manage probe errors" to the spi tree Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).