Re: [RFC PATCH 5/7] bus: stm32_sys_bus: add support for STM32MP15 and STM32MP13 system bus

[Gatien CHEVALLIER <gatien.chevallier@foss.st.com>]

On 12/22/22 11:28, Krzysztof Kozlowski wrote:
> On 21/12/2022 18:30, Gatien Chevallier wrote:
>> This driver is checking the access rights of the different
>> peripherals connected to the system bus. If access is denied,
>> the associated device tree node is skipped so the platform bus
>> does not probe it.
>>
>> Signed-off-by: Loic PALLARDY <loic.pallardy@st.com>
>> Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
>> ---
>>   MAINTAINERS                 |   6 ++
>>   drivers/bus/Kconfig         |   9 ++
>>   drivers/bus/Makefile        |   1 +
>>   drivers/bus/stm32_sys_bus.c | 180 ++++++++++++++++++++++++++++++++++++
>>   4 files changed, 196 insertions(+)
>>   create mode 100644 drivers/bus/stm32_sys_bus.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 886d3f69ee64..768a8272233e 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -19522,6 +19522,12 @@ L:	linux-spi@vger.kernel.org
>>   S:	Maintained
>>   F:	drivers/spi/spi-stm32.c
>>   
>> +ST STM32 SYS BUS DRIVER
>> +M:	Gatien Chevallier <gatien.chevallier@foss.st.com>
>> +S:	Maintained
>> +F:	Documentation/devicetree/bindings/bus/st,sys-bus.yaml
>> +F:	drivers/bus/stm32_sys_bus.c
>> +
>>   ST STPDDC60 DRIVER
>>   M:	Daniel Nilsson <daniel.nilsson@flex.com>
>>   L:	linux-hwmon@vger.kernel.org
>> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
>> index 7bfe998f3514..638bf5839cb0 100644
>> --- a/drivers/bus/Kconfig
>> +++ b/drivers/bus/Kconfig
>> @@ -163,6 +163,15 @@ config QCOM_SSC_BLOCK_BUS
>>   	  i2c/spi/uart controllers, a hexagon core, and a clock controller
>>   	  which provides clocks for the above.
>>   
>> +config STM32_SYS_BUS
>> +	bool "STM32 System bus controller"
>> +	depends on ARCH_STM32
> 
> || COMPILE_TEST

Sure, I will add this in V3

> 
>> +	default MACH_STM32MP157 || MACH_STM32MP13
>> +	help
>> +	  Say y to enable device access right verification before device probing.
>> +	  If access not granted, device won't be probed and an error message will
>> +	  provide the reason.
> 
> (...)
> 
>> +
>> +static int stm32_sys_bus_probe(struct platform_device *pdev)
>> +{
>> +	struct sys_bus_data *pdata;
>> +	struct resource *res;
>> +	void __iomem *mmio;
>> +	struct stm32_sys_bus_match_data *mdata;
>> +	struct device_node *np = pdev->dev.of_node;
>> +
>> +	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
>> +	if (!pdata)
>> +		return -ENOMEM;
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	mmio = devm_ioremap_resource(&pdev->dev, res);
> 
> Use helper for these two.

Ok, I will use devm_platform_ioremap_resource()

> 
>> +	if (IS_ERR(mmio))
>> +		return PTR_ERR(mmio);
>> +
>> +	pdata->sys_bus_base = mmio;
>> +
>> +	mdata = (struct stm32_sys_bus_match_data *)of_device_get_match_data(&pdev->dev);
> 
> Why do you need the cast?

I do not :) TBH, mdata is not useful at all. Changing to directly assign 
to pdata->pconf, that is now const there is no reason to modify it.

> 
>> +	if (!mdata)
> 
> Can you explain the case when this can actually happen? If it can, you
> have bug in ID table.

No I cannot as the driver is probed. It is only a sanity check, I can 
remove it for V3. However the function can return NULL... Would you 
prefer an explicit check on NULL or a simple removal?

> 
>> +		return -EINVAL;
>> +
>> +	pdata->pconf = mdata;
>> +	pdata->dev = &pdev->dev;
>> +
>> +	platform_set_drvdata(pdev, pdata);
>> +
>> +	stm32_sys_bus_populate(pdata);
>> +
>> +	/* Populate all available nodes */
>> +	return of_platform_populate(np, NULL, NULL, &pdev->dev);
>> +}
>> +
>> +static const struct stm32_sys_bus_match_data stm32mp15_sys_bus_data = {
>> +	.max_entries = STM32MP15_ETZPC_ENTRIES,
>> +	.sys_bus_get_access = stm32_etzpc_get_access,
>> +};
>> +
>> +static const struct stm32_sys_bus_match_data stm32mp13_sys_bus_data = {
>> +	.max_entries = STM32MP13_ETZPC_ENTRIES,
>> +	.sys_bus_get_access = stm32_etzpc_get_access,
> 
> It's the same as previous, drop.

Yes, ops is useless, I will directly call stm32_etzpc_get_access() in V3.

> 
>> +};
>> +
>> +static const struct of_device_id stm32_sys_bus_of_match[] = {
>> +	{ .compatible = "st,stm32mp15-sys-bus", .data = &stm32mp15_sys_bus_data },
>> +	{ .compatible = "st,stm32mp13-sys-bus", .data = &stm32mp13_sys_bus_data },
>> +	{}
>> +};
>> +MODULE_DEVICE_TABLE(of, stm32_sys_bus_of_match);
>> +
>> +static struct platform_driver stm32_sys_bus_driver = {
>> +	.probe  = stm32_sys_bus_probe,
>> +	.driver = {
>> +		.name = "stm32-sys-bus",
>> +		.of_match_table = stm32_sys_bus_of_match,
>> +	},
>> +};
>> +
>> +static int __init stm32_sys_bus_init(void)
>> +{
>> +	return platform_driver_register(&stm32_sys_bus_driver);
>> +}
>> +arch_initcall(stm32_sys_bus_init);
>> +
> 
> Best regards,
> Krzysztof
> 

Best regards,
Gatien

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel