From: Amjad Ouled-Ameur <aouledameur@baylibre.com>
To: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re:
Date: Wed, 14 Sep 2022 15:18:27 +0200 [thread overview]
Message-ID: <fda72ade-3c47-e9f8-d041-3a87d55318aa@baylibre.com> (raw)
In-Reply-To: <20220914131219.18236-1-aouledameur@baylibre.com>
Hi,
The subject has not been parsed correctly, I resent a proper patch here:
https://patchwork.kernel.org/project/linux-mediatek/patch/20220914131339.18348-1-aouledameur@baylibre.com/
Sorry for the noise.
Regards,
Amjad
On 9/14/22 15:12, Amjad Ouled-Ameur wrote:
> Subject: [PATCH] arm64: dts: mediatek: mt8183: remove thermal zones without
> trips.
>
> Thermal zones without trip point are not registered by thermal core.
>
> tzts1 ~ tzts6 zones of mt8183 were intially introduced for test-purpose
> only but are not supposed to remain on DT.
>
> Remove the zones above and keep only cpu_thermal.
>
> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
> ---
> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 57 ------------------------
> 1 file changed, 57 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 9d32871973a2..f65fae8939de 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -1182,63 +1182,6 @@ THERMAL_NO_LIMIT
> };
> };
> };
> -
> - /* The tzts1 ~ tzts6 don't need to polling */
> - /* The tzts1 ~ tzts6 don't need to thermal throttle */
> -
> - tzts1: tzts1 {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> - thermal-sensors = <&thermal 1>;
> - sustainable-power = <5000>;
> - trips {};
> - cooling-maps {};
> - };
> -
> - tzts2: tzts2 {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> - thermal-sensors = <&thermal 2>;
> - sustainable-power = <5000>;
> - trips {};
> - cooling-maps {};
> - };
> -
> - tzts3: tzts3 {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> - thermal-sensors = <&thermal 3>;
> - sustainable-power = <5000>;
> - trips {};
> - cooling-maps {};
> - };
> -
> - tzts4: tzts4 {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> - thermal-sensors = <&thermal 4>;
> - sustainable-power = <5000>;
> - trips {};
> - cooling-maps {};
> - };
> -
> - tzts5: tzts5 {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> - thermal-sensors = <&thermal 5>;
> - sustainable-power = <5000>;
> - trips {};
> - cooling-maps {};
> - };
> -
> - tztsABB: tztsABB {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> - thermal-sensors = <&thermal 6>;
> - sustainable-power = <5000>;
> - trips {};
> - cooling-maps {};
> - };
> };
>
> pwm0: pwm@1100e000 {
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-14 13:19 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-14 13:12 Amjad Ouled-Ameur
2022-09-14 13:18 ` Amjad Ouled-Ameur [this message]
-- strict thread matches above, loose matches on Subject: below --
2021-01-08 10:32 Misono Tomohiro
2021-01-08 12:30 ` Arnd Bergmann
2020-03-03 15:27 Gene Chen
2020-03-04 14:56 ` Matthias Brugger
2020-03-04 15:15 ` Re: Lee Jones
2020-03-04 18:00 ` Re: Matthias Brugger
2020-02-11 22:34 Rajat Jain
2020-02-12 9:30 ` Jarkko Nikula
2020-02-12 10:24 ` Re: Andy Shevchenko
2019-01-07 17:28 [PATCH] arch/arm/mm: Remove duplicate header Souptick Joarder
2019-01-17 11:23 ` Souptick Joarder
2019-01-17 11:28 ` Mike Rapoport
2019-01-31 5:54 ` Souptick Joarder
2019-01-31 12:58 ` Vladimir Murzin
2019-02-01 12:32 ` Re: Souptick Joarder
2019-02-01 12:36 ` Re: Vladimir Murzin
2019-02-01 12:41 ` Re: Souptick Joarder
2019-02-01 13:02 ` Re: Vladimir Murzin
2019-02-01 15:15 ` Re: Russell King - ARM Linux admin
2019-02-01 15:22 ` Re: Russell King - ARM Linux admin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fda72ade-3c47-e9f8-d041-3a87d55318aa@baylibre.com \
--to=aouledameur@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).