[PATCHv3 0/9] cpufreq: Add flag to auto-register as cooling device

[PATCHv3 0/9] cpufreq: Add flag to auto-register as cooling device

[Amit Kucheria]

Add a flag for cpufreq drivers to tell cpufreq core to auto-register
themselves as a thermal cooling device.

There series converts over all the drivers except arm_big_little.c.
Tested on SDM845 with the qcom-cpufreq-hw driver. Only compile-tested the
others.

Things needing fixing (but not a blocker for the series):
 - Look at how to detect that we're not in IKS mode in arm_big_little's
   .ready callback.

Changes since v2:
 - Get rid of #ifdef'ery and let the pointer exist in all cases
 - Get rid of (!CPU_THERMAL || THERMAL) dependency in all cpufreq drivers'
   Kconfig

Changes since v1:
- Fix compilation failures with allmodconfig
- Get rid of #ifdef in cpufreq.c
- Removed miscellaneous patches and sent them separately
- Merged patches 1 and 2 from v1

Amit Kucheria (9):
  thermal: cpu_cooling: Require thermal core to be compiled in
  cpufreq: Auto-register the driver as a thermal cooling device if asked
  cpufreq: qcom-hw: Register as a cpufreq cooling device
  cpufreq: imx6q: Use auto-registration of thermal cooling device
  cpufreq: cpufreq-dt: Use auto-registration of thermal cooling device
  cpufreq: mediatek: Use auto-registration of thermal cooling device
  cpufreq: qoriq: Use auto-registration of thermal cooling device
  cpufreq: scmi: Use auto-registration of thermal cooling device
  cpufreq: scpi: Use auto-registration of thermal cooling device

 drivers/cpufreq/Kconfig            |  3 ---
 drivers/cpufreq/Kconfig.arm        |  5 -----
 drivers/cpufreq/cpufreq-dt.c       | 14 ++------------
 drivers/cpufreq/cpufreq.c          |  6 ++++++
 drivers/cpufreq/imx6q-cpufreq.c    | 24 ++----------------------
 drivers/cpufreq/mediatek-cpufreq.c | 14 ++------------
 drivers/cpufreq/qcom-cpufreq-hw.c  |  3 ++-
 drivers/cpufreq/qoriq-cpufreq.c    | 15 ++-------------
 drivers/cpufreq/scmi-cpufreq.c     | 14 ++------------
 drivers/cpufreq/scpi-cpufreq.c     | 14 ++------------
 drivers/thermal/Kconfig            |  1 +
 include/linux/cpufreq.h            | 21 +++++++++++++++++++++
 12 files changed, 42 insertions(+), 92 deletions(-)

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv3 6/9] cpufreq: mediatek: Use auto-registration of thermal cooling device

[Amit Kucheria]

Use the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to
automatically register as a thermal cooling device.

This allows removal of boiler plate code from the driver.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/cpufreq/mediatek-cpufreq.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index eb8920d39818..9a937f4c63e7 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -14,7 +14,6 @@
 
 #include <linux/clk.h>
 #include <linux/cpu.h>
-#include <linux/cpu_cooling.h>
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
 #include <linux/module.h>
@@ -48,7 +47,6 @@ struct mtk_cpu_dvfs_info {
 	struct regulator *sram_reg;
 	struct clk *cpu_clk;
 	struct clk *inter_clk;
-	struct thermal_cooling_device *cdev;
 	struct list_head list_head;
 	int intermediate_voltage;
 	bool need_voltage_tracking;
@@ -307,13 +305,6 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
 
 #define DYNAMIC_POWER "dynamic-power-coefficient"
 
-static void mtk_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct mtk_cpu_dvfs_info *info = policy->driver_data;
-
-	info->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
 {
 	struct device *cpu_dev;
@@ -472,7 +463,6 @@ static int mtk_cpufreq_exit(struct cpufreq_policy *policy)
 {
 	struct mtk_cpu_dvfs_info *info = policy->driver_data;
 
-	cpufreq_cooling_unregister(info->cdev);
 	dev_pm_opp_free_cpufreq_table(info->cpu_dev, &policy->freq_table);
 
 	return 0;
@@ -480,13 +470,13 @@ static int mtk_cpufreq_exit(struct cpufreq_policy *policy)
 
 static struct cpufreq_driver mtk_cpufreq_driver = {
 	.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
-		 CPUFREQ_HAVE_GOVERNOR_PER_POLICY,
+		 CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
+		 CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify = cpufreq_generic_frequency_table_verify,
 	.target_index = mtk_cpufreq_set_target,
 	.get = cpufreq_generic_get,
 	.init = mtk_cpufreq_init,
 	.exit = mtk_cpufreq_exit,
-	.ready = mtk_cpufreq_ready,
 	.name = "mtk-cpufreq",
 	.attr = cpufreq_generic_attr,
 };
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv3 8/9] cpufreq: scmi: Use auto-registration of thermal cooling device

[Amit Kucheria]

Use the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to
automatically register as a thermal cooling device.

This allows removal of boiler plate code from the driver.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/cpufreq/scmi-cpufreq.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c
index 242c3370544e..b19e9d129f8f 100644
--- a/drivers/cpufreq/scmi-cpufreq.c
+++ b/drivers/cpufreq/scmi-cpufreq.c
@@ -11,7 +11,6 @@
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
-#include <linux/cpu_cooling.h>
 #include <linux/export.h>
 #include <linux/module.h>
 #include <linux/pm_opp.h>
@@ -22,7 +21,6 @@
 struct scmi_data {
 	int domain_id;
 	struct device *cpu_dev;
-	struct thermal_cooling_device *cdev;
 };
 
 static const struct scmi_handle *handle;
@@ -185,7 +183,6 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy)
 {
 	struct scmi_data *priv = policy->driver_data;
 
-	cpufreq_cooling_unregister(priv->cdev);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
 	kfree(priv);
 	dev_pm_opp_remove_all_dynamic(priv->cpu_dev);
@@ -193,17 +190,11 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static void scmi_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct scmi_data *priv = policy->driver_data;
-
-	priv->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static struct cpufreq_driver scmi_cpufreq_driver = {
 	.name	= "scmi",
 	.flags	= CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
-		  CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+		  CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+		  CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify	= cpufreq_generic_frequency_table_verify,
 	.attr	= cpufreq_generic_attr,
 	.target_index	= scmi_cpufreq_set_target,
@@ -211,7 +202,6 @@ static struct cpufreq_driver scmi_cpufreq_driver = {
 	.get	= scmi_cpufreq_get_rate,
 	.init	= scmi_cpufreq_init,
 	.exit	= scmi_cpufreq_exit,
-	.ready	= scmi_cpufreq_ready,
 };
 
 static int scmi_cpufreq_probe(struct scmi_device *sdev)
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv3 9/9] cpufreq: scpi: Use auto-registration of thermal cooling device

[Amit Kucheria]

Use the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to
automatically register as a thermal cooling device.

This allows removal of boiler plate code from the driver.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/cpufreq/scpi-cpufreq.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c
index 99449738faa4..82420e8e5f0d 100644
--- a/drivers/cpufreq/scpi-cpufreq.c
+++ b/drivers/cpufreq/scpi-cpufreq.c
@@ -22,7 +22,6 @@
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
-#include <linux/cpu_cooling.h>
 #include <linux/export.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
@@ -34,7 +33,6 @@
 struct scpi_data {
 	struct clk *clk;
 	struct device *cpu_dev;
-	struct thermal_cooling_device *cdev;
 };
 
 static struct scpi_ops *scpi_ops;
@@ -186,7 +184,6 @@ static int scpi_cpufreq_exit(struct cpufreq_policy *policy)
 {
 	struct scpi_data *priv = policy->driver_data;
 
-	cpufreq_cooling_unregister(priv->cdev);
 	clk_put(priv->clk);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
 	kfree(priv);
@@ -195,23 +192,16 @@ static int scpi_cpufreq_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static void scpi_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct scpi_data *priv = policy->driver_data;
-
-	priv->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static struct cpufreq_driver scpi_cpufreq_driver = {
 	.name	= "scpi-cpufreq",
 	.flags	= CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
-		  CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+		  CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+		  CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify	= cpufreq_generic_frequency_table_verify,
 	.attr	= cpufreq_generic_attr,
 	.get	= scpi_cpufreq_get_rate,
 	.init	= scpi_cpufreq_init,
 	.exit	= scpi_cpufreq_exit,
-	.ready	= scpi_cpufreq_ready,
 	.target_index	= scpi_cpufreq_set_target,
 };
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel