* [GIT PULL] fixes for omaps for v5.4
@ 2019-10-02 18:20 Tony Lindgren
2019-10-03 16:22 ` Olof Johansson
0 siblings, 1 reply; 2+ messages in thread
From: Tony Lindgren @ 2019-10-02 18:20 UTC (permalink / raw)
To: soc; +Cc: Tony Lindgren, linux-omap, arm, linux-arm-kernel
From: "Tony Lindgren" <tony@atomide.com>
The following changes since commit 4d856f72c10ecb060868ed10ff1b1453943fc6c8:
Linux 5.3 (2019-09-15 14:19:32 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.4/fixes-rc1-signed
for you to fetch changes up to f90ec6cdf674248dcad85bf9af6e064bf472b841:
ARM: dts: am4372: Set memory bandwidth limit for DISPC (2019-09-30 09:32:03 -0700)
----------------------------------------------------------------
Fixes for omaps for v5.4-rc cycle
Here are fixes for omaps to deal with few regressions, and to fix
more boot time errors and warnings:
- The recent ti-sysc interconnect target module driver changes had
incorrect clock bits for both clocks and dts that cause warnings
- For omap3-gta04, gpio changes caused the LCD to break a while back,
and after discussing things the right fix is to set spi-cs-high
- Recent omapdrm changes to use generic panels caused tfp410 to be
disabled as we now must enable the generic support for it in
defconfig
- Recent omapdrm and backlight changes also finally made droid4 LCD
to work, so let's enable it in the defconfig it can be used out
of the box. This is not strictly a fix, but we still also have the
older CONFIG_MFD_TI_LMU options available so this cuts down the
confusion for trying to guess which display and which backlight
is needed
- Recent ti-sysc interconnect target module changes need the gpio
module disabled on some boards, but this now needs to happen at
the module level, not at the gpio driver level
- Recent changes to probe system timers with ti-sysc caused warnings
about mismatch in syconfig registers, so let's configure the option
for RESET_STATUS as available in the TRMs
- Recent changes to probe LCDC with ti-sysc caused warnings about
mismatch in sysconfig registers, so let's configure the missing
idlemodes for both platform data and dts as documented in TRMs
- Since we moved mach-omap2 to probe with device tree, we've been
getting voltage controller warnings. Turns out this code is no
longer needed, so let's just remove omap2_set_init_voltage() to
get rid of the pointless warnings
- Configure am4372 dispc memory bandwidth to avoid underflow errors
----------------------------------------------------------------
Adam Ford (1):
ARM: omap2plus_defconfig: Enable DRM_TI_TFP410
H. Nikolaus Schaller (1):
DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
Peter Ujfalusi (1):
ARM: dts: am4372: Set memory bandwidth limit for DISPC
Tony Lindgren (8):
clk: ti: dra7: Fix mcasp8 clock bits
ARM: dts: Fix wrong clocks for dra7 mcasp
Merge branch 'fixes-merge-window-pt2' into fixes
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
ARM: dts: Fix gpio0 flags for am335x-icev2
ARM: OMAP2+: Fix missing reset done flag for am3 and am43
ARM: OMAP2+: Add missing LCDC midlemode for am335x
ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
arch/arm/boot/dts/am335x-icev2.dts | 2 +-
arch/arm/boot/dts/am33xx-l4.dtsi | 6 +-
arch/arm/boot/dts/am3517-evm.dts | 23 +----
arch/arm/boot/dts/am4372.dtsi | 2 +
arch/arm/boot/dts/dra7-l4.dtsi | 48 +++++-----
arch/arm/boot/dts/logicpd-som-lv.dtsi | 26 +++---
arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi | 37 ++------
arch/arm/boot/dts/omap3-gta04.dtsi | 1 +
arch/arm/configs/omap2plus_defconfig | 4 +
.../mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c | 3 +-
arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 5 +-
arch/arm/mach-omap2/pdata-quirks.c | 4 +-
arch/arm/mach-omap2/pm.c | 100 ---------------------
drivers/bus/ti-sysc.c | 52 +++++++----
drivers/clk/ti/clk-7xx.c | 6 +-
15 files changed, 104 insertions(+), 215 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [GIT PULL] fixes for omaps for v5.4
2019-10-02 18:20 [GIT PULL] fixes for omaps for v5.4 Tony Lindgren
@ 2019-10-03 16:22 ` Olof Johansson
0 siblings, 0 replies; 2+ messages in thread
From: Olof Johansson @ 2019-10-03 16:22 UTC (permalink / raw)
To: Tony Lindgren
Cc: SoC Team, ARM-SoC Maintainers, Linux ARM Mailing List, linux-omap
On Wed, Oct 2, 2019 at 11:21 AM Tony Lindgren <tony@atomide.com> wrote:
>
> From: "Tony Lindgren" <tony@atomide.com>
>
> The following changes since commit 4d856f72c10ecb060868ed10ff1b1453943fc6c8:
>
> Linux 5.3 (2019-09-15 14:19:32 -0700)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.4/fixes-rc1-signed
>
> for you to fetch changes up to f90ec6cdf674248dcad85bf9af6e064bf472b841:
>
> ARM: dts: am4372: Set memory bandwidth limit for DISPC (2019-09-30 09:32:03 -0700)
Merged, thanks!
-Olof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-10-03 16:22 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-02 18:20 [GIT PULL] fixes for omaps for v5.4 Tony Lindgren
2019-10-03 16:22 ` Olof Johansson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).