[PATCH v2] arm64: dts: qcom: sc7280: Add venus DT node

[PATCH v2] arm64: dts: qcom: sc7280: Add venus DT node

[Dikshita Agarwal]

Add DT entries for the sc7280 venus encoder/decoder.

Co-developed-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>

change since v1:
 - added rpmh power domain and opp table.
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 75 ++++++++++++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 4c44a52..4982f96 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -60,6 +60,11 @@
 			no-map;
 			reg = <0x0 0x80b00000 0x0 0x100000>;
 		};
+
+		video_mem: memory@8b200000 {
+			reg = <0x0 0x8b200000 0x0 0x500000>;
+			no-map;
+		};
 	};
 
 	cpus {
@@ -850,6 +855,76 @@
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		venus: video-codec@0aa00000 {
+			compatible = "qcom,sc7280-venus";
+			reg = <0 0x0aa00000 0 0xd0600>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>,
+				 <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>,
+				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CORE_CLK>,
+				 <&videocc VIDEO_CC_MVS0_AXI_CLK>;
+			clock-names = "core", "bus", "iface",
+				      "vcodec_core", "vcodec_bus";
+
+			power-domains = <&videocc MVSC_GDSC>,
+					<&videocc MVS0_GDSC>;
+					<&rpmhpd SC7280_CX>;
+			power-domain-names = "venus", "vcodec0", "cx";
+			operating-points-v2 = <&venus_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>,
+					<&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "cpu-cfg", "video-mem";
+
+			iommus = <&apps_smmu 0x2180 0x20>,
+				 <&apps_smmu 0x2184 0x20>;
+			memory-region = <&video_mem>;
+
+			video-decoder {
+				compatible = "venus-decoder";
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+			};
+
+			video-firmware {
+				iommus = <&apps_smmu 0x21a2 0x0>;
+			};
+
+			venus_opp_table: venus-opp-table {
+				compatible = "operating-points-v2";
+
+				opp-133330000 {
+					opp-hz = /bits/ 64 <133330000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-335000000 {
+					opp-hz = /bits/ 64 <335000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-424000000 {
+					opp-hz = /bits/ 64 <424000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+
+				opp-460000000 {
+					opp-hz = /bits/ 64 <460000000>;
+					required-opps = <&rpmhpd_opp_turbo>;
+				};
+			};
+
+		};
+
 		videocc: clock-controller@aaf0000 {
 			compatible = "qcom,sc7280-videocc";
 			reg = <0 0xaaf0000 0 0x10000>;
-- 
2.7.4

Re: [PATCH v2] arm64: dts: qcom: sc7280: Add venus DT node

[Stanimir Varbanov]

On 6/2/21 6:20 PM, Dikshita Agarwal wrote:
> Add DT entries for the sc7280 venus encoder/decoder.
> 
> Co-developed-by: Mansur Alisha Shaik <mansur@codeaurora.org>
> Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
> 
> change since v1:
>  - added rpmh power domain and opp table.
> ---
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 75 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 75 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 4c44a52..4982f96 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -60,6 +60,11 @@
>  			no-map;
>  			reg = <0x0 0x80b00000 0x0 0x100000>;
>  		};
> +
> +		video_mem: memory@8b200000 {
> +			reg = <0x0 0x8b200000 0x0 0x500000>;
> +			no-map;
> +		};
>  	};
>  
>  	cpus {
> @@ -850,6 +855,76 @@
>  			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
>  		};
>  
> +		venus: video-codec@0aa00000 {
> +			compatible = "qcom,sc7280-venus";
> +			reg = <0 0x0aa00000 0 0xd0600>;
> +			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> +
> +			clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>,
> +				 <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>,
> +				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
> +				 <&videocc VIDEO_CC_MVS0_CORE_CLK>,
> +				 <&videocc VIDEO_CC_MVS0_AXI_CLK>;
> +			clock-names = "core", "bus", "iface",
> +				      "vcodec_core", "vcodec_bus";
> +
> +			power-domains = <&videocc MVSC_GDSC>,
> +					<&videocc MVS0_GDSC>;
> +					<&rpmhpd SC7280_CX>;
> +			power-domain-names = "venus", "vcodec0", "cx";
> +			operating-points-v2 = <&venus_opp_table>;
> +
> +			interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>,
> +					<&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>;
> +			interconnect-names = "cpu-cfg", "video-mem";
> +
> +			iommus = <&apps_smmu 0x2180 0x20>,
> +				 <&apps_smmu 0x2184 0x20>;
> +			memory-region = <&video_mem>;
> +
> +			video-decoder {
> +				compatible = "venus-decoder";
> +			};
> +
> +			video-encoder {
> +				compatible = "venus-encoder";
> +			};
> +
> +			video-firmware {
> +				iommus = <&apps_smmu 0x21a2 0x0>;
> +			};

The assumption for all Qualcomm SoCs was that the firmware will be
loaded by TZ, i.e. the platform has TZ firmware. I'd like to continue on
that assumption, and propose to move video-firmware subnode into
appropriate board dts file, in this case sc7280-idp.dts.

-- 
regards,
Stan