Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Ilia Lin <ilialin@codeaurora.org>
To: mturquette@baylibre.com, sboyd@kernel.org, robh@kernel.org,
	mark.rutland@arm.com, viresh.kumar@linaro.org, nm@ti.com,
	lgirdwood@gmail.com, broonie@kernel.org, andy.gross@linaro.org,
	david.brown@linaro.org, catalin.marinas@arm.com,
	will.deacon@arm.com, rjw@rjwysocki.net,
	linux-clk@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	rnayak@codeaurora.org, ilialin@codeaurora.org,
	amit.kucheria@linaro.org, nicolas.dechesne@linaro.org,
	celster@codeaurora.org, tfinkel@codeaurora.org
Subject: [PATCH v6 13/14] dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu
Date: Mon, 14 May 2018 16:11:59 +0300
Message-ID: <1526303520-5843-14-git-send-email-ilialin@codeaurora.org> (raw)
In-Reply-To: <1526303520-5843-1-git-send-email-ilialin@codeaurora.org>

In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
that have KRYO processors, the CPU ferequencies subset and voltage value
of each OPP varies based on the silicon variant in use.
Qualcomm Technologies, Inc. Process Voltage Scaling Tables
defines the voltage and frequency value based on the msm-id in SMEM
and speedbin blown in the efuse combination.
The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
to provide the OPP framework with required information.
This is used to determine the voltage and frequency value for each OPP of
operating-points-v2 table when it is parsed by the OPP framework.

This change adds documentation.

Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
---
 .../devicetree/bindings/opp/kryo-cpufreq.txt       | 680 +++++++++++++++++++++
 1 file changed, 680 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/opp/kryo-cpufreq.txt

diff --git a/Documentation/devicetree/bindings/opp/kryo-cpufreq.txt b/Documentation/devicetree/bindings/opp/kryo-cpufreq.txt
new file mode 100644
index 0000000..c2127b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/kryo-cpufreq.txt
@@ -0,0 +1,680 @@
+Qualcomm Technologies, Inc. KRYO CPUFreq and OPP bindings
+===================================
+
+In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
+that have KRYO processors, the CPU ferequencies subset and voltage value
+of each OPP varies based on the silicon variant in use.
+Qualcomm Technologies, Inc. Process Voltage Scaling Tables
+defines the voltage and frequency value based on the msm-id in SMEM
+and speedbin blown in the efuse combination.
+The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
+to provide the OPP framework with required information (existing HW bitmap).
+This is used to determine the voltage and frequency value for each OPP of
+operating-points-v2 table when it is parsed by the OPP framework.
+
+Required properties:
+--------------------
+In 'cpus' nodes:
+- operating-points-v2: Phandle to the operating-points-v2 table to use.
+
+In 'operating-points-v2' table:
+- compatible: Should be
+	- 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
+- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
+		efuse registers that has information about the
+		speedbin that is used to select the right frequency/voltage
+		value pair.
+		Please refer the for nvmem-cells
+		bindings Documentation/devicetree/bindings/nvmem/nvmem.txt
+		and also examples below.
+
+In every OPP node:
+- opp-supported-hw: A single 32 bit bitmap value, representing compatible HW.
+		    Bitmap:
+			0:	MSM8996 V3, speedbin 0
+			1:	MSM8996 V3, speedbin 1
+			2:	MSM8996 V3, speedbin 2
+			3:	unused
+			4:	MSM8996 SG, speedbin 0
+			5:	MSM8996 SG, speedbin 1
+			6:	MSM8996 SG, speedbin 2
+			7-31:	unused
+
+Example 1:
+---------
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			clocks = <&kryocc 0>;
+			cpu-supply = <&pm8994_s11_saw>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			clocks = <&kryocc 0>;
+			cpu-supply = <&pm8994_s11_saw>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			clocks = <&kryocc 1>;
+			cpu-supply = <&pm8994_s11_saw>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			};
+		};
+
+		CPU3: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			clocks = <&kryocc 1>;
+			cpu-supply = <&pm8994_s11_saw>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU2>;
+				};
+
+				core1 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+	};
+
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x77>;
+			clock-latency-ns = <200000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-422400000 {
+			opp-hz = /bits/ 64 <422400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-556800000 {
+			opp-hz = /bits/ 64 <556800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x77>;
+			clock-latency-ns = <200000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1228800000 {
+			opp-hz = /bits/ 64 <1228800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x5>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x72>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x5>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x4>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x71>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x20>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	cluster1_opp: opp_table1 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x77>;
+			clock-latency-ns = <200000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-556800000 {
+			opp-hz = /bits/ 64 <556800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-883200000 {
+			opp-hz = /bits/ 64 <883200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1785600000 {
+			opp-hz = /bits/ 64 <1785600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x6>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x71>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x74>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2150400000 {
+			opp-hz = /bits/ 64 <2150400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x31>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2342400000 {
+			opp-hz = /bits/ 64 <2342400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+....
+
+reserved-memory {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+....
+	smem_mem: smem-mem@86000000 {
+		reg = <0x0 0x86000000 0x0 0x200000>;
+		no-map;
+	};
+....
+};
+
+smem {
+	compatible = "qcom,smem";
+	memory-region = <&smem_mem>;
+	hwlocks = <&tcsr_mutex 3>;
+};
+
+soc {
+....
+	qfprom: qfprom@74000 {
+		compatible = "qcom,qfprom";
+		reg = <0x00074000 0x8ff>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		....
+		speedbin_efuse: speedbin@133 {
+			reg = <0x133 0x1>;
+			bits = <5 3>;
+		};
+	};
+};
-- 
1.9.1

  parent reply index

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-14 13:11 [PATCH v6 00/14] CPU scaling support for msm8996 Ilia Lin
2018-05-14 13:11 ` [PATCH v6 01/14] soc: qcom: Separate kryo l2 accessors from PMU driver Ilia Lin
2018-05-14 13:11 ` [PATCH v6 02/14] clk: qcom: Make clk_alpha_pll_configure available to modules Ilia Lin
2018-05-14 13:11 ` [PATCH v6 03/14] clk: qcom: Add CPU clock driver for msm8996 Ilia Lin
2018-05-14 13:11 ` [PATCH v6 04/14] clk: qcom: Add DT bindings for " Ilia Lin
2018-05-14 13:11 ` [PATCH v6 05/14] clk: qcom: cpu-8996: Add support to switch to alternate PLL Ilia Lin
2018-05-14 13:11 ` [PATCH v6 06/14] clk: qcom: cpu-8996: Add support to switch below 600Mhz Ilia Lin
2018-05-14 13:11 ` [PATCH v6 07/14] clk: qcom: Add ACD path to CPU clock driver for msm8996 Ilia Lin
2018-05-14 13:11 ` [PATCH v6 08/14] dt: qcom: Add opp and thermal to the msm8996 Ilia Lin
2018-05-15  4:04   ` Viresh Kumar
2018-05-14 13:11 ` [PATCH v6 09/14] regulator: qcom_spmi: Add support for SAW Ilia Lin
2018-05-14 13:11 ` [PATCH v6 10/14] dt-bindings: qcom_spmi: Add support for SAW documentation Ilia Lin
2018-05-14 13:11 ` [PATCH v6 11/14] dt: qcom: Add SAW regulator for 8x96 CPUs Ilia Lin
2018-05-15  4:04   ` Viresh Kumar
2018-05-14 13:11 ` [PATCH v6 12/14] cpufreq: Add Kryo CPU scaling driver Ilia Lin
2018-05-15  4:09   ` Viresh Kumar
2018-05-14 13:11 ` Ilia Lin [this message]
2018-05-15  4:09   ` [PATCH v6 13/14] dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu Viresh Kumar
2018-05-14 13:12 ` [PATCH v6 14/14] dt: qcom: Add qcom-cpufreq-kryo driver configuration Ilia Lin
2018-05-15  4:11   ` Viresh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1526303520-5843-14-git-send-email-ilialin@codeaurora.org \
    --to=ilialin@codeaurora.org \
    --cc=amit.kucheria@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=broonie@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=celster@codeaurora.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=nicolas.dechesne@linaro.org \
    --cc=nm@ti.com \
    --cc=rjw@rjwysocki.net \
    --cc=rnayak@codeaurora.org \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tfinkel@codeaurora.org \
    --cc=viresh.kumar@linaro.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git