linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v1 4/6] scsi: ufs-qcom: Adjust bus bandwidth voting and unvoting
       [not found] <1573116140-22408-1-git-send-email-cang@codeaurora.org>
@ 2019-11-07  8:42 ` Can Guo
  0 siblings, 0 replies; only message in thread
From: Can Guo @ 2019-11-07  8:42 UTC (permalink / raw)
  To: asutoshd, nguyenb, rnayak, linux-scsi, kernel-team, saravanak,
	salyzyn, cang
  Cc: Andy Gross, Alim Akhtar, Avri Altman, Pedro Sousa,
	James E.J. Bottomley, Martin K. Petersen,
	open list:ARM/QUALCOMM SUPPORT, open list

The bus bandwidth voting is required to be done before the bus clocks
are enabled, and the unvoting is required to be done only after the bus
clocks are disabled.

Signed-off-by: Can Guo <cang@codeaurora.org>
---
 drivers/scsi/ufs/ufs-qcom.c | 58 ++++++++++++++++++++++++++++++---------------
 1 file changed, 39 insertions(+), 19 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index c69c29a1c..f703dd0 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -38,7 +38,6 @@ enum {
 
 static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS];
 
-static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote);
 static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host);
 static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
 						       u32 clk_cycles);
@@ -674,7 +673,7 @@ static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result)
 	}
 }
 
-static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
+static int __ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
 {
 	int err = 0;
 
@@ -705,7 +704,7 @@ static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
 
 	vote = ufs_qcom_get_bus_vote(host, mode);
 	if (vote >= 0)
-		err = ufs_qcom_set_bus_vote(host, vote);
+		err = __ufs_qcom_set_bus_vote(host, vote);
 	else
 		err = vote;
 
@@ -716,6 +715,35 @@ static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
 	return err;
 }
 
+static int ufs_qcom_set_bus_vote(struct ufs_hba *hba, bool on)
+{
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	int vote, err;
+
+	/*
+	 * In case ufs_qcom_init() is not yet done, simply ignore.
+	 * This ufs_qcom_set_bus_vote() shall be called from
+	 * ufs_qcom_init() after init is done.
+	 */
+	if (!host)
+		return 0;
+
+	if (on) {
+		vote = host->bus_vote.saved_vote;
+		if (vote == host->bus_vote.min_bw_vote)
+			ufs_qcom_update_bus_bw_vote(host);
+	} else {
+		vote = host->bus_vote.min_bw_vote;
+	}
+
+	err = __ufs_qcom_set_bus_vote(host, vote);
+	if (err)
+		dev_err(hba->dev, "%s: set bus vote failed %d\n",
+				__func__, err);
+
+	return err;
+}
+
 static ssize_t
 show_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
 			char *buf)
@@ -792,7 +820,7 @@ static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
 	return 0;
 }
 
-static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
+static int ufs_qcom_set_bus_vote(struct ufs_hba *host, bool on)
 {
 	return 0;
 }
@@ -1030,8 +1058,7 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
 				 enum ufs_notify_change_status status)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-	int err;
-	int vote = 0;
+	int err = 0;
 
 	/*
 	 * In case ufs_qcom_init() is not yet done, simply ignore.
@@ -1041,27 +1068,19 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
 	if (!host)
 		return 0;
 
-	if (on && (status == POST_CHANGE)) {
+	if (on && (status == PRE_CHANGE))
+		err = ufs_qcom_set_bus_vote(hba, true);
+	else if (on && (status == POST_CHANGE)) {
 		/* enable the device ref clock for HS mode*/
 		if (ufshcd_is_hs_mode(&hba->pwr_info))
 			ufs_qcom_dev_ref_clk_ctrl(host, true);
-		vote = host->bus_vote.saved_vote;
-		if (vote == host->bus_vote.min_bw_vote)
-			ufs_qcom_update_bus_bw_vote(host);
-
 	} else if (!on && (status == PRE_CHANGE)) {
 		if (!ufs_qcom_is_link_active(hba)) {
 			/* disable device ref_clk */
 			ufs_qcom_dev_ref_clk_ctrl(host, false);
 		}
-
-		vote = host->bus_vote.min_bw_vote;
-	}
-
-	err = ufs_qcom_set_bus_vote(host, vote);
-	if (err)
-		dev_err(hba->dev, "%s: set bus vote failed %d\n",
-				__func__, err);
+	} else if (!on && (status == POST_CHANGE))
+		err = ufs_qcom_set_bus_vote(hba, false);
 
 	return err;
 }
@@ -1238,6 +1257,7 @@ static int ufs_qcom_init(struct ufs_hba *hba)
 	ufs_qcom_set_caps(hba);
 	ufs_qcom_advertise_quirks(hba);
 
+	ufs_qcom_set_bus_vote(hba, true);
 	ufs_qcom_setup_clocks(hba, true, POST_CHANGE);
 
 	if (hba->dev->id < MAX_UFS_QCOM_HOSTS)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2019-11-07  8:43 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <1573116140-22408-1-git-send-email-cang@codeaurora.org>
2019-11-07  8:42 ` [PATCH v1 4/6] scsi: ufs-qcom: Adjust bus bandwidth voting and unvoting Can Guo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).