[PATCH v6 0/3] Add modem Clock controller (MSS CC) driver for SC7180

[PATCH v6 0/3] Add modem Clock controller (MSS CC) driver for SC7180

[Taniya Das]

[v6]
 * Combine the Documentation YAML schema and clock IDs for GCC MSS and
   MSS clocks.
 * Remove a unnecessary header file inclusion, define the max_registers for
   regmap and also update the fw_name to remove _clk suffix.
 * Update the copyright year.

[v5]
 * Update the clock ID for GCC_MSS_NAV_AXIS_CLK to GCC_MSS_NAV_AXI_CLK

[v4]
 * Split the GCC MSS clocks and Modem clock driver.
 * Update mss_regmap_config to const.
 * Rename the Documentation binding as per the latest convention.
 * Minor comments of clock-names/clocks properties updated.

[v3]
  * Add clocks/clock-names required for the MSS clock controller.
  * Add pm_ops to enable/disable the required dependent clock.
  * Add parent_data for the MSS clocks.
  * Update the GCC MSS clocks from _CBCR to _CLK.

[v2]
  * Update the license for the documentation and fix minor comments in the
    YAML bindings.

[v1]
  * Add driver support for Modem clock controller for SC7180 and also
    update device tree bindings for the various clocks supported in the
    clock controller.

Taniya Das (3):
  dt-bindings: clock: Add YAML schemas for the QCOM MSS clock bindings
  clk: qcom: gcc: Add support for modem clocks in GCC
  clk: qcom: Add modem clock controller driver for SC7180

 .../devicetree/bindings/clock/qcom,sc7180-mss.yaml |  62 +++++++++
 drivers/clk/qcom/Kconfig                           |   9 ++
 drivers/clk/qcom/Makefile                          |   1 +
 drivers/clk/qcom/gcc-sc7180.c                      |  72 ++++++++++-
 drivers/clk/qcom/mss-sc7180.c                      | 143 +++++++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-sc7180.h        |   7 +-
 include/dt-bindings/clock/qcom,mss-sc7180.h        |  12 ++
 7 files changed, 304 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
 create mode 100644 drivers/clk/qcom/mss-sc7180.c
 create mode 100644 include/dt-bindings/clock/qcom,mss-sc7180.h

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

[PATCH v6 1/3] dt-bindings: clock: Add YAML schemas for the QCOM MSS clock bindings

[Taniya Das]

The Modem Subsystem clock provider have a bunch of generic properties
that are needed in a device tree. Add a YAML schemas for those.

Add clock ids for GCC MSS and MSS clocks which are required to bring
the modem out of reset.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 .../devicetree/bindings/clock/qcom,sc7180-mss.yaml | 62 ++++++++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-sc7180.h        |  7 ++-
 include/dt-bindings/clock/qcom,mss-sc7180.h        | 12 +++++
 3 files changed, 80 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
 create mode 100644 include/dt-bindings/clock/qcom,mss-sc7180.h

diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
new file mode 100644
index 0000000..72493dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/qcom,sc7180-mss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Modem Clock Controller Binding
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm modem clock control module which supports the clocks.
+
+  See also dt-bindings/clock/qcom,mss-sc7180.h.
+
+properties:
+  compatible:
+    enum:
+       - qcom,sc7180-mss
+
+  clocks:
+    items:
+      - description: gcc_mss_mfab_axi clock from GCC
+      - description: gcc_mss_nav_axi clock from GCC
+      - description: gcc_mss_cfg_ahb clock from GCC
+
+  clock-names:
+    items:
+      - const: gcc_mss_mfab_axis
+      - const: gcc_mss_nav_axi
+      - const: cfg_ahb
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    clock-controller@41a8000 {
+      compatible = "qcom,sc7180-mss";
+      reg = <0 0x041a8000 0 0x8000>;
+      clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+               <&gcc GCC_MSS_NAV_AXI_CLK>,
+               <&gcc GCC_MSS_CFG_AHB_CLK>;
+      clock-names = "gcc_mss_mfab_axis",
+                    "gcc_mss_nav_axi",
+                    "cfg_ahb";
+      #clock-cells = <1>;
+    };
+...
diff --git a/include/dt-bindings/clock/qcom,gcc-sc7180.h b/include/dt-bindings/clock/qcom,gcc-sc7180.h
index e8029b2e..1258fd0 100644
--- a/include/dt-bindings/clock/qcom,gcc-sc7180.h
+++ b/include/dt-bindings/clock/qcom,gcc-sc7180.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
  */
 
 #ifndef _DT_BINDINGS_CLK_QCOM_GCC_SC7180_H
@@ -132,6 +132,11 @@
 #define GCC_VIDEO_GPLL0_DIV_CLK_SRC				122
 #define GCC_VIDEO_THROTTLE_AXI_CLK				123
 #define GCC_VIDEO_XO_CLK					124
+#define GCC_MSS_CFG_AHB_CLK					125
+#define GCC_MSS_MFAB_AXIS_CLK					126
+#define GCC_MSS_NAV_AXI_CLK					127
+#define GCC_MSS_Q6_MEMNOC_AXI_CLK				128
+#define GCC_MSS_SNOC_AXI_CLK					129
 
 /* GCC resets */
 #define GCC_QUSB2PHY_PRIM_BCR					0
diff --git a/include/dt-bindings/clock/qcom,mss-sc7180.h b/include/dt-bindings/clock/qcom,mss-sc7180.h
new file mode 100644
index 0000000..f15a9de
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,mss-sc7180.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_MSS_SC7180_H
+#define _DT_BINDINGS_CLK_QCOM_MSS_SC7180_H
+
+#define MSS_AXI_CRYPTO_CLK	0
+#define MSS_AXI_NAV_CLK		1
+
+#endif
-- 
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

Re: [PATCH v6 1/3] dt-bindings: clock: Add YAML schemas for the QCOM MSS clock bindings

[Rob Herring]

On Sun, 15 Mar 2020 00:19:56 +0530, Taniya Das wrote:
> The Modem Subsystem clock provider have a bunch of generic properties
> that are needed in a device tree. Add a YAML schemas for those.
> 
> Add clock ids for GCC MSS and MSS clocks which are required to bring
> the modem out of reset.
> 
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---
>  .../devicetree/bindings/clock/qcom,sc7180-mss.yaml | 62 ++++++++++++++++++++++
>  include/dt-bindings/clock/qcom,gcc-sc7180.h        |  7 ++-
>  include/dt-bindings/clock/qcom,mss-sc7180.h        | 12 +++++
>  3 files changed, 80 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
>  create mode 100644 include/dt-bindings/clock/qcom,mss-sc7180.h
> 

My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml: $id: relative path/filename doesn't match actual path or filename
	expected: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml#

See https://patchwork.ozlabs.org/patch/1254940
Please check and re-submit.

Re: [PATCH v6 1/3] dt-bindings: clock: Add YAML schemas for the QCOM MSS clock bindings

[Taniya Das]

On 3/19/2020 3:34 AM, Rob Herring wrote:
> On Sun, 15 Mar 2020 00:19:56 +0530, Taniya Das wrote:
>> The Modem Subsystem clock provider have a bunch of generic properties
>> that are needed in a device tree. Add a YAML schemas for those.
>>
>> Add clock ids for GCC MSS and MSS clocks which are required to bring
>> the modem out of reset.
>>
>> Signed-off-by: Taniya Das <tdas@codeaurora.org>
>> ---
>>   .../devicetree/bindings/clock/qcom,sc7180-mss.yaml | 62 ++++++++++++++++++++++
>>   include/dt-bindings/clock/qcom,gcc-sc7180.h        |  7 ++-
>>   include/dt-bindings/clock/qcom,mss-sc7180.h        | 12 +++++
>>   3 files changed, 80 insertions(+), 1 deletion(-)
>>   create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
>>   create mode 100644 include/dt-bindings/clock/qcom,mss-sc7180.h
>>
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml: $id: relative path/filename doesn't match actual path or filename
> 	expected: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml#
> 
> See https://patchwork.ozlabs.org/patch/1254940
> Please check and re-submit.
> 
Hi Rob,

Thanks, I have fixed it in the next patch series.

Is there a way to catch these before submitting? As I do not see these 
errors on my machine.

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

--

Re: [PATCH v6 1/3] dt-bindings: clock: Add YAML schemas for the QCOM MSS clock bindings

[Rob Herring]

On Wed, Mar 18, 2020 at 11:37 PM Taniya Das <tdas@codeaurora.org> wrote:
>
>
>
> On 3/19/2020 3:34 AM, Rob Herring wrote:
> > On Sun, 15 Mar 2020 00:19:56 +0530, Taniya Das wrote:
> >> The Modem Subsystem clock provider have a bunch of generic properties
> >> that are needed in a device tree. Add a YAML schemas for those.
> >>
> >> Add clock ids for GCC MSS and MSS clocks which are required to bring
> >> the modem out of reset.
> >>
> >> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> >> ---
> >>   .../devicetree/bindings/clock/qcom,sc7180-mss.yaml | 62 ++++++++++++++++++++++
> >>   include/dt-bindings/clock/qcom,gcc-sc7180.h        |  7 ++-
> >>   include/dt-bindings/clock/qcom,mss-sc7180.h        | 12 +++++
> >>   3 files changed, 80 insertions(+), 1 deletion(-)
> >>   create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
> >>   create mode 100644 include/dt-bindings/clock/qcom,mss-sc7180.h
> >>
> >
> > My bot found errors running 'make dt_binding_check' on your patch:
> >
> > Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml: $id: relative path/filename doesn't match actual path or filename
> >       expected: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml#
> >
> > See https://patchwork.ozlabs.org/patch/1254940
> > Please check and re-submit.
> >
> Hi Rob,
>
> Thanks, I have fixed it in the next patch series.
>
> Is there a way to catch these before submitting? As I do not see these
> errors on my machine.

If you ran 'make dt_binding_check' already, then update dt-schema with pip.

Rob

Re: [PATCH v6 1/3] dt-bindings: clock: Add YAML schemas for the QCOM MSS clock bindings

[Stephen Boyd]

Quoting Taniya Das (2020-03-14 11:49:56)
> The Modem Subsystem clock provider have a bunch of generic properties
> that are needed in a device tree. Add a YAML schemas for those.
> 
> Add clock ids for GCC MSS and MSS clocks which are required to bring
> the modem out of reset.
> 
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---
>  .../devicetree/bindings/clock/qcom,sc7180-mss.yaml | 62 ++++++++++++++++++++++
>  include/dt-bindings/clock/qcom,gcc-sc7180.h        |  7 ++-
>  include/dt-bindings/clock/qcom,mss-sc7180.h        | 12 +++++
>  3 files changed, 80 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
>  create mode 100644 include/dt-bindings/clock/qcom,mss-sc7180.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
> new file mode 100644
> index 0000000..72493dd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/bindings/clock/qcom,sc7180-mss.yaml#

remove 'bindings' above.

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Modem Clock Controller Binding
> +
> +maintainers:
> +  - Taniya Das <tdas@codeaurora.org>
> +
> +description: |
> +  Qualcomm modem clock control module which supports the clocks.
> +
> +  See also dt-bindings/clock/qcom,mss-sc7180.h.

Can you follow how for example gcc-sc7180 does this?

  See also:
  - dt-bindings/clock/qcom,mss-sc7180.h

[PATCH v6 2/3] clk: qcom: gcc: Add support for modem clocks in GCC

[Taniya Das]

Add the required modem clocks in global clock controller which are
required to bring the modem out of reset.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 drivers/clk/qcom/gcc-sc7180.c | 72 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 71 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
index 7f59fb8..6a51b5b 100644
--- a/drivers/clk/qcom/gcc-sc7180.c
+++ b/drivers/clk/qcom/gcc-sc7180.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
  */

 #include <linux/clk-provider.h>
@@ -2165,6 +2165,71 @@ static struct clk_branch gcc_video_xo_clk = {
 	},
 };

+static struct clk_branch gcc_mss_cfg_ahb_clk = {
+	.halt_reg = 0x8a000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8a000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_cfg_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_mfab_axis_clk = {
+	.halt_reg = 0x8a004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x8a004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_mfab_axis_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_nav_axi_clk = {
+	.halt_reg = 0x8a00c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x8a00c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_nav_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_snoc_axi_clk = {
+	.halt_reg = 0x8a150,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8a150,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_snoc_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_q6_memnoc_axi_clk = {
+	.halt_reg = 0x8a154,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8a154,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_q6_memnoc_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct gdsc ufs_phy_gdsc = {
 	.gdscr = 0x77004,
 	.pd = {
@@ -2336,6 +2401,11 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
 	[GPLL7] = &gpll7.clkr,
 	[GPLL4] = &gpll4.clkr,
 	[GPLL1] = &gpll1.clkr,
+	[GCC_MSS_CFG_AHB_CLK] = &gcc_mss_cfg_ahb_clk.clkr,
+	[GCC_MSS_MFAB_AXIS_CLK] = &gcc_mss_mfab_axis_clk.clkr,
+	[GCC_MSS_NAV_AXI_CLK] = &gcc_mss_nav_axi_clk.clkr,
+	[GCC_MSS_Q6_MEMNOC_AXI_CLK] = &gcc_mss_q6_memnoc_axi_clk.clkr,
+	[GCC_MSS_SNOC_AXI_CLK] = &gcc_mss_snoc_axi_clk.clkr,
 };

 static const struct qcom_reset_map gcc_sc7180_resets[] = {
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

[PATCH v6 3/3] clk: qcom: Add modem clock controller driver for SC7180

[Taniya Das]

Add support for the modem clock controller found on SC7180
based devices. This would allow modem drivers to probe and
control their clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 drivers/clk/qcom/Kconfig      |   9 +++
 drivers/clk/qcom/Makefile     |   1 +
 drivers/clk/qcom/mss-sc7180.c | 143 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 153 insertions(+)
 create mode 100644 drivers/clk/qcom/mss-sc7180.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 15cdcdc..4225f86 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -280,6 +280,15 @@ config SC_GPUCC_7180
 	  Say Y if you want to support graphics controller devices and
 	  functionality such as 3D graphics.

+config SC_MSS_7180
+	tristate "SC7180 Modem Clock Controller"
+	select SC_GCC_7180
+	help
+	  Support for the Modem Subsystem clock controller on Qualcomm
+	  Technologies, Inc on SC7180 devices.
+	  Say Y if you want to use the Modem branch clocks of the Modem
+	  subsystem clock controller to reset the MSS subsystem.
+
 config SC_VIDEOCC_7180
 	tristate "SC7180 Video Clock Controller"
 	select SC_GCC_7180
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 656a87e..9135592 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_QCS_TURING_404) += turingcc-qcs404.o
 obj-$(CONFIG_SC_DISPCC_7180) += dispcc-sc7180.o
 obj-$(CONFIG_SC_GCC_7180) += gcc-sc7180.o
 obj-$(CONFIG_SC_GPUCC_7180) += gpucc-sc7180.o
+obj-$(CONFIG_SC_MSS_7180) += mss-sc7180.o
 obj-$(CONFIG_SC_VIDEOCC_7180) += videocc-sc7180.o
 obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o
 obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o
diff --git a/drivers/clk/qcom/mss-sc7180.c b/drivers/clk/qcom/mss-sc7180.c
new file mode 100644
index 0000000..673fa1a
--- /dev/null
+++ b/drivers/clk/qcom/mss-sc7180.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,mss-sc7180.h>
+
+#include "clk-regmap.h"
+#include "clk-branch.h"
+#include "common.h"
+
+static struct clk_branch mss_axi_nav_clk = {
+	.halt_reg = 0x20bc,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x20bc,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "mss_axi_nav_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "gcc_mss_nav_axi",
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch mss_axi_crypto_clk = {
+	.halt_reg = 0x20cc,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x20cc,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "mss_axi_crypto_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "gcc_mss_mfab_axis",
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static const struct regmap_config mss_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.fast_io	= true,
+	.max_register	= 0x41aa0cc,
+};
+
+static struct clk_regmap *mss_sc7180_clocks[] = {
+	[MSS_AXI_CRYPTO_CLK] = &mss_axi_crypto_clk.clkr,
+	[MSS_AXI_NAV_CLK] = &mss_axi_nav_clk.clkr,
+};
+
+static const struct qcom_cc_desc mss_sc7180_desc = {
+	.config = &mss_regmap_config,
+	.clks = mss_sc7180_clocks,
+	.num_clks = ARRAY_SIZE(mss_sc7180_clocks),
+};
+
+static int mss_sc7180_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	pm_runtime_enable(&pdev->dev);
+	ret = pm_clk_create(&pdev->dev);
+	if (ret)
+		goto disable_pm_runtime;
+
+	ret = pm_clk_add(&pdev->dev, "cfg_ahb");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to acquire iface clock\n");
+		goto destroy_pm_clk;
+	}
+
+	ret = qcom_cc_probe(pdev, &mss_sc7180_desc);
+	if (ret < 0)
+		goto destroy_pm_clk;
+
+	return 0;
+
+destroy_pm_clk:
+	pm_clk_destroy(&pdev->dev);
+
+disable_pm_runtime:
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static int mss_sc7180_remove(struct platform_device *pdev)
+{
+	pm_clk_destroy(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops mss_sc7180_pm_ops = {
+	SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
+static const struct of_device_id mss_sc7180_match_table[] = {
+	{ .compatible = "qcom,sc7180-mss" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mss_sc7180_match_table);
+
+static struct platform_driver mss_sc7180_driver = {
+	.probe		= mss_sc7180_probe,
+	.remove		= mss_sc7180_remove,
+	.driver		= {
+		.name		= "sc7180-mss",
+		.of_match_table = mss_sc7180_match_table,
+		.pm = &mss_sc7180_pm_ops,
+	},
+};
+
+static int __init mss_sc7180_init(void)
+{
+	return platform_driver_register(&mss_sc7180_driver);
+}
+subsys_initcall(mss_sc7180_init);
+
+static void __exit mss_sc7180_exit(void)
+{
+	platform_driver_unregister(&mss_sc7180_driver);
+}
+module_exit(mss_sc7180_exit);
+
+MODULE_DESCRIPTION("QTI MSS SC7180 Driver");
+MODULE_LICENSE("GPL v2");
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

Re: [PATCH v6 0/3] Add modem Clock controller (MSS CC) driver for SC7180

[Sibi Sankar]

On 2020-03-15 00:19, Taniya Das wrote:
> [v6]
>  * Combine the Documentation YAML schema and clock IDs for GCC MSS and
>    MSS clocks.
>  * Remove a unnecessary header file inclusion, define the max_registers 
> for
>    regmap and also update the fw_name to remove _clk suffix.
>  * Update the copyright year.

Tested-by: Sibi Sankar <sibis@codeaurora.org>

> 
> [v5]
>  * Update the clock ID for GCC_MSS_NAV_AXIS_CLK to GCC_MSS_NAV_AXI_CLK
> 
> [v4]
>  * Split the GCC MSS clocks and Modem clock driver.
>  * Update mss_regmap_config to const.
>  * Rename the Documentation binding as per the latest convention.
>  * Minor comments of clock-names/clocks properties updated.
> 
> [v3]
>   * Add clocks/clock-names required for the MSS clock controller.
>   * Add pm_ops to enable/disable the required dependent clock.
>   * Add parent_data for the MSS clocks.
>   * Update the GCC MSS clocks from _CBCR to _CLK.
> 
> [v2]
>   * Update the license for the documentation and fix minor comments in 
> the
>     YAML bindings.
> 
> [v1]
>   * Add driver support for Modem clock controller for SC7180 and also
>     update device tree bindings for the various clocks supported in the
>     clock controller.
> 
> Taniya Das (3):
>   dt-bindings: clock: Add YAML schemas for the QCOM MSS clock bindings
>   clk: qcom: gcc: Add support for modem clocks in GCC
>   clk: qcom: Add modem clock controller driver for SC7180
> 
>  .../devicetree/bindings/clock/qcom,sc7180-mss.yaml |  62 +++++++++
>  drivers/clk/qcom/Kconfig                           |   9 ++
>  drivers/clk/qcom/Makefile                          |   1 +
>  drivers/clk/qcom/gcc-sc7180.c                      |  72 ++++++++++-
>  drivers/clk/qcom/mss-sc7180.c                      | 143 
> +++++++++++++++++++++
>  include/dt-bindings/clock/qcom,gcc-sc7180.h        |   7 +-
>  include/dt-bindings/clock/qcom,mss-sc7180.h        |  12 ++
>  7 files changed, 304 insertions(+), 2 deletions(-)
>  create mode 100644 
> Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
>  create mode 100644 drivers/clk/qcom/mss-sc7180.c
>  create mode 100644 include/dt-bindings/clock/qcom,mss-sc7180.h
> 
> --
> Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a 
> member
> of the Code Aurora Forum, hosted by the  Linux Foundation.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.

[PATCH v6 0/3] Add modem Clock controller (MSS CC) driver for SC7180

[Taniya Das]

[v6]
 * Combine the Documentation YAML schema and clock IDs for GCC MSS and
   MSS clocks.
 * Remove a unnecessary header file inclusion, define the max_registers for
   regmap and also update the fw_name to remove _clk suffix.
 * Update the copyright year.

[v5]
 * Update the clock ID for GCC_MSS_NAV_AXIS_CLK to GCC_MSS_NAV_AXI_CLK

[v4]
 * Split the GCC MSS clocks and Modem clock driver.
 * Update mss_regmap_config to const.
 * Rename the Documentation binding as per the latest convention.
 * Minor comments of clock-names/clocks properties updated.

[v3]
  * Add clocks/clock-names required for the MSS clock controller.
  * Add pm_ops to enable/disable the required dependent clock.
  * Add parent_data for the MSS clocks.
  * Update the GCC MSS clocks from _CBCR to _CLK.

[v2]
  * Update the license for the documentation and fix minor comments in the
    YAML bindings.

[v1]
  * Add driver support for Modem clock controller for SC7180 and also
    update device tree bindings for the various clocks supported in the
    clock controller.

Taniya Das (3):
  dt-bindings: clock: Add YAML schemas for the QCOM MSS clock bindings
  clk: qcom: gcc: Add support for modem clocks in GCC
  clk: qcom: Add modem clock controller driver for SC7180

 .../devicetree/bindings/clock/qcom,sc7180-mss.yaml |  62 +++++++++
 drivers/clk/qcom/Kconfig                           |   9 ++
 drivers/clk/qcom/Makefile                          |   1 +
 drivers/clk/qcom/gcc-sc7180.c                      |  72 ++++++++++-
 drivers/clk/qcom/mss-sc7180.c                      | 143 +++++++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-sc7180.h        |   7 +-
 include/dt-bindings/clock/qcom,mss-sc7180.h        |  12 ++
 7 files changed, 304 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
 create mode 100644 drivers/clk/qcom/mss-sc7180.c
 create mode 100644 include/dt-bindings/clock/qcom,mss-sc7180.h

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

[PATCH v6 2/3] clk: qcom: gcc: Add support for modem clocks in GCC

[Taniya Das]

Add the required modem clocks in global clock controller which are
required to bring the modem out of reset.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 drivers/clk/qcom/gcc-sc7180.c | 72 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 71 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
index 7f59fb8..6a51b5b 100644
--- a/drivers/clk/qcom/gcc-sc7180.c
+++ b/drivers/clk/qcom/gcc-sc7180.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
  */

 #include <linux/clk-provider.h>
@@ -2165,6 +2165,71 @@ static struct clk_branch gcc_video_xo_clk = {
 	},
 };

+static struct clk_branch gcc_mss_cfg_ahb_clk = {
+	.halt_reg = 0x8a000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8a000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_cfg_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_mfab_axis_clk = {
+	.halt_reg = 0x8a004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x8a004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_mfab_axis_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_nav_axi_clk = {
+	.halt_reg = 0x8a00c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x8a00c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_nav_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_snoc_axi_clk = {
+	.halt_reg = 0x8a150,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8a150,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_snoc_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_q6_memnoc_axi_clk = {
+	.halt_reg = 0x8a154,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8a154,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_q6_memnoc_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct gdsc ufs_phy_gdsc = {
 	.gdscr = 0x77004,
 	.pd = {
@@ -2336,6 +2401,11 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
 	[GPLL7] = &gpll7.clkr,
 	[GPLL4] = &gpll4.clkr,
 	[GPLL1] = &gpll1.clkr,
+	[GCC_MSS_CFG_AHB_CLK] = &gcc_mss_cfg_ahb_clk.clkr,
+	[GCC_MSS_MFAB_AXIS_CLK] = &gcc_mss_mfab_axis_clk.clkr,
+	[GCC_MSS_NAV_AXI_CLK] = &gcc_mss_nav_axi_clk.clkr,
+	[GCC_MSS_Q6_MEMNOC_AXI_CLK] = &gcc_mss_q6_memnoc_axi_clk.clkr,
+	[GCC_MSS_SNOC_AXI_CLK] = &gcc_mss_snoc_axi_clk.clkr,
 };

 static const struct qcom_reset_map gcc_sc7180_resets[] = {
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.