linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wesley Cheng <wcheng@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org, kishon@ti.com,
	robh+dt@kernel.org, mark.rutland@arm.com, p.zabel@pengutronix.de
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, Wesley Cheng <wcheng@codeaurora.org>
Subject: [PATCH v3 1/4] dt-bindings: phy: Add binding for qcom,usb-hs-7nm
Date: Wed, 25 Mar 2020 10:43:01 -0700	[thread overview]
Message-ID: <1585158184-5907-2-git-send-email-wcheng@codeaurora.org> (raw)
In-Reply-To: <1585158184-5907-1-git-send-email-wcheng@codeaurora.org>

This binding shows the descriptions and properties for the
7nm Synopsis HS USB PHY used on QCOM platforms.

Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/phy/qcom,usb-hs-7nm.yaml   | 76 ++++++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-7nm.yaml

diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-7nm.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-7nm.yaml
new file mode 100644
index 0000000..7292e27
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-7nm.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,usb-hs-7nm.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Synopsys 7nm High-Speed USB PHY
+
+maintainers:
+  - Wesley Cheng <wcheng@codeaurora.org>
+
+description: |
+  Qualcomm Hi-Speed 7nm USB PHY
+
+properties:
+  compatible:
+    enum:
+      - qcom,usb-snps-hs-7nm-phy
+      - qcom,sm8150-usb-hs-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: rpmhcc ref clock
+
+  clock-names:
+    items:
+      - const: ref
+
+  resets:
+    items:
+      - description: PHY core reset
+
+  vdda-pll-supply:
+    description: phandle to the regulator VDD supply node.
+
+  vdda18-supply:
+    description: phandle to the regulator 1.8V supply node.
+
+  vdda33-supply:
+    description: phandle to the regulator 3.3V supply node.
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - resets
+  - vdda-pll-supply
+  - vdda18-supply
+  - vdda33-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+    usb_1_hsphy: phy@88e2000 {
+        compatible = "qcom,sm8150-usb-hs-phy";
+        reg = <0 0x088e2000 0 0x400>;
+        status = "disabled";
+        #phy-cells = <0>;
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "ref";
+
+        resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+    };
+...
\ No newline at end of file
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

  reply	other threads:[~2020-03-25 17:43 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-25 17:43 [PATCH v3 0/4] Add SS/HS-USB changes for Qualcomm SM8150 chipset Wesley Cheng
2020-03-25 17:43 ` Wesley Cheng [this message]
2020-03-25 17:43 ` [PATCH v3 2/4] phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs Wesley Cheng
2020-03-25 17:43 ` [PATCH v3 3/4] phy: qcom-qmp: Add SM8150 QMP USB3 PHY support Wesley Cheng
2020-03-25 17:43 ` [PATCH v3 4/4] phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB Wesley Cheng
2020-03-27  0:32   ` Wesley Cheng
2020-04-07 22:23 [PATCH v3 0/4] Add SS/HS-USB changes for Qualcomm SM8150 chipset Wesley Cheng
2020-04-07 22:23 ` [PATCH v3 1/4] dt-bindings: phy: Add binding for qcom,usb-hs-7nm Wesley Cheng
2020-04-11  2:13   ` Stephen Boyd
2020-04-11  3:56     ` Wesley Cheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1585158184-5907-2-git-send-email-wcheng@codeaurora.org \
    --to=wcheng@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).