Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Rakesh Pillai <pillair@codeaurora.org>
To: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	Rakesh Pillai <pillair@codeaurora.org>
Subject: [PATCH v11] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node
Date: Wed, 20 May 2020 09:26:36 +0530
Message-ID: <1589946996-31264-1-git-send-email-pillair@codeaurora.org> (raw)

Add device node for the ath10k SNOC platform driver probe
and add resources required for WCN3990 on sc7180 soc.

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
Changes from v10:
- Corrected the position of wifi node, as per address
- Removed the wlan_fw_mem from reserved memory, since
  its already added as reserved memory in board DT file.
---
 arch/arm64/boot/dts/qcom/sc7180-idp.dts |  7 +++++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi    | 22 ++++++++++++++++++++++
 2 files changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 4e9149d..38b102e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -389,6 +389,13 @@
 	};
 };
 
+&wifi {
+	status = "okay";
+	wifi-firmware {
+		iommus = <&apps_smmu 0xc2 0x1>;
+	};
+};
+
 /* PINCTRL - additions to nodes defined in sc7180.dtsi */
 
 &qspi_clk {
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 6b12c60..da79f8f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2811,6 +2811,28 @@
 
 			#freq-domain-cells = <1>;
 		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x18800000 0 0x800000>;
+			reg-names = "membase";
+			iommus = <&apps_smmu 0xc0 0x1>;
+			interrupts =
+				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
+				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
+				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
+				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
+				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
+				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
+				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
+				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
+				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
+				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
+				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
+				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
+			memory-region = <&wlan_mem>;
+			status = "disabled";
+		};
 	};
 
 	thermal-zones {
-- 
2.7.4

             reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-20  3:56 Rakesh Pillai [this message]
2020-05-20 17:50 ` Sibi Sankar
2020-05-21 16:19 ` Evan Green
2020-06-17 22:45   ` Evan Green
2020-06-20 14:44     ` Rakesh Pillai
2020-06-21 19:06     ` Bjorn Andersson
2020-06-22  9:16       ` Rakesh Pillai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1589946996-31264-1-git-send-email-pillair@codeaurora.org \
    --to=pillair@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git