* [PATCH v5 1/2] clk: qcom: lpasscc-sc7810: Use devm in probe @ 2020-10-19 22:49 Douglas Anderson 2020-10-19 22:49 ` [PATCH v5 2/2] clk: qcom: lpass-sc7180: Disentangle the two clock devices Douglas Anderson ` (3 more replies) 0 siblings, 4 replies; 7+ messages in thread From: Douglas Anderson @ 2020-10-19 22:49 UTC (permalink / raw) To: Stephen Boyd Cc: Taniya Das, David Brown, Rajendra Nayak, linux-soc, Douglas Anderson, Andy Gross, Bjorn Andersson, Michael Turquette, linux-arm-msm, linux-clk, linux-kernel Let's convert the lpass clock control driver to use devm. This is a few more lines of code, but it will be useful in a later patch which disentangles the two devices handled by this driver. Signed-off-by: Douglas Anderson <dianders@chromium.org> --- (no changes since v4) Changes in v4: - Fixed typo lapss => lpass - Moved lpass_pm_runtime_disable() lpass_pm_clk_destroy() in file. Changes in v3: - ("clk: qcom: lpasscc-sc7810: Use devm in probe") new for v3. drivers/clk/qcom/lpasscorecc-sc7180.c | 38 +++++++++++++++------------ 1 file changed, 21 insertions(+), 17 deletions(-) diff --git a/drivers/clk/qcom/lpasscorecc-sc7180.c b/drivers/clk/qcom/lpasscorecc-sc7180.c index 228d08f5d26f..2d15e33ec837 100644 --- a/drivers/clk/qcom/lpasscorecc-sc7180.c +++ b/drivers/clk/qcom/lpasscorecc-sc7180.c @@ -356,6 +356,16 @@ static const struct qcom_cc_desc lpass_audio_hm_sc7180_desc = { .num_gdscs = ARRAY_SIZE(lpass_audio_hm_sc7180_gdscs), }; +static void lpass_pm_runtime_disable(void *data) +{ + pm_runtime_disable(data); +} + +static void lpass_pm_clk_destroy(void *data) +{ + pm_clk_destroy(data); +} + static int lpass_core_cc_sc7180_probe(struct platform_device *pdev) { const struct qcom_cc_desc *desc; @@ -418,34 +428,28 @@ static int lpass_core_sc7180_probe(struct platform_device *pdev) int ret; pm_runtime_enable(&pdev->dev); + ret = devm_add_action_or_reset(&pdev->dev, lpass_pm_runtime_disable, &pdev->dev); + if (ret) + return ret; + ret = pm_clk_create(&pdev->dev); if (ret) - goto disable_pm_runtime; + return ret; + ret = devm_add_action_or_reset(&pdev->dev, lpass_pm_clk_destroy, &pdev->dev); + if (ret) + return ret; ret = pm_clk_add(&pdev->dev, "iface"); if (ret < 0) { dev_err(&pdev->dev, "failed to acquire iface clock\n"); - goto destroy_pm_clk; + return ret; } - ret = -EINVAL; clk_probe = of_device_get_match_data(&pdev->dev); if (!clk_probe) - goto destroy_pm_clk; - - ret = clk_probe(pdev); - if (ret) - goto destroy_pm_clk; - - return 0; - -destroy_pm_clk: - pm_clk_destroy(&pdev->dev); - -disable_pm_runtime: - pm_runtime_disable(&pdev->dev); + return -EINVAL; - return ret; + return clk_probe(pdev); } static const struct dev_pm_ops lpass_core_cc_pm_ops = { -- 2.29.0.rc1.297.gfa9743e501-goog ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v5 2/2] clk: qcom: lpass-sc7180: Disentangle the two clock devices 2020-10-19 22:49 [PATCH v5 1/2] clk: qcom: lpasscc-sc7810: Use devm in probe Douglas Anderson @ 2020-10-19 22:49 ` Douglas Anderson 2020-10-29 9:02 ` Taniya Das 2020-11-05 2:34 ` Stephen Boyd 2020-10-29 9:02 ` [PATCH v5 1/2] clk: qcom: lpasscc-sc7810: Use devm in probe Taniya Das ` (2 subsequent siblings) 3 siblings, 2 replies; 7+ messages in thread From: Douglas Anderson @ 2020-10-19 22:49 UTC (permalink / raw) To: Stephen Boyd Cc: Taniya Das, David Brown, Rajendra Nayak, linux-soc, Douglas Anderson, Andy Gross, Bjorn Andersson, Michael Turquette, linux-arm-msm, linux-clk, linux-kernel The sc7180 lpass clock driver manages two different devices. These two devices were tangled together, using one probe and a lookup to figure out the real probe. I think it's cleaner to really separate the probe for these two devices since they're really different things, just both managed by the same driver. Signed-off-by: Douglas Anderson <dianders@chromium.org> --- Note: this is now a 2-patch cleanup series with no actual bugfixes since the problem solved by patch #3 was better solved with: https://lore.kernel.org/r/20201017020137.1251319-1-sboyd@kernel.org Changes in v5: - Two blank lines inserted before "return" statements. Changes in v3: - ("clk: qcom: lpass-sc7180: Disentangle the two clock devices") new for v3. drivers/clk/qcom/lpasscorecc-sc7180.c | 103 ++++++++++++++++---------- 1 file changed, 64 insertions(+), 39 deletions(-) diff --git a/drivers/clk/qcom/lpasscorecc-sc7180.c b/drivers/clk/qcom/lpasscorecc-sc7180.c index 2d15e33ec837..1a3925badd7c 100644 --- a/drivers/clk/qcom/lpasscorecc-sc7180.c +++ b/drivers/clk/qcom/lpasscorecc-sc7180.c @@ -366,12 +366,39 @@ static void lpass_pm_clk_destroy(void *data) pm_clk_destroy(data); } +static int lpass_create_pm_clks(struct platform_device *pdev) +{ + int ret; + + pm_runtime_enable(&pdev->dev); + ret = devm_add_action_or_reset(&pdev->dev, lpass_pm_runtime_disable, &pdev->dev); + if (ret) + return ret; + + ret = pm_clk_create(&pdev->dev); + if (ret) + return ret; + ret = devm_add_action_or_reset(&pdev->dev, lpass_pm_clk_destroy, &pdev->dev); + if (ret) + return ret; + + ret = pm_clk_add(&pdev->dev, "iface"); + if (ret < 0) + dev_err(&pdev->dev, "failed to acquire iface clock\n"); + + return ret; +} + static int lpass_core_cc_sc7180_probe(struct platform_device *pdev) { const struct qcom_cc_desc *desc; struct regmap *regmap; int ret; + ret = lpass_create_pm_clks(pdev); + if (ret) + return ret; + lpass_core_cc_sc7180_regmap_config.name = "lpass_audio_cc"; desc = &lpass_audio_hm_sc7180_desc; ret = qcom_cc_probe_by_index(pdev, 1, desc); @@ -402,6 +429,11 @@ static int lpass_core_cc_sc7180_probe(struct platform_device *pdev) static int lpass_hm_core_probe(struct platform_device *pdev) { const struct qcom_cc_desc *desc; + int ret; + + ret = lpass_create_pm_clks(pdev); + if (ret) + return ret; lpass_core_cc_sc7180_regmap_config.name = "lpass_hm_core"; desc = &lpass_core_hm_sc7180_desc; @@ -409,55 +441,28 @@ static int lpass_hm_core_probe(struct platform_device *pdev) return qcom_cc_probe_by_index(pdev, 0, desc); } -static const struct of_device_id lpass_core_cc_sc7180_match_table[] = { +static const struct of_device_id lpass_hm_sc7180_match_table[] = { { .compatible = "qcom,sc7180-lpasshm", - .data = lpass_hm_core_probe, }, + { } +}; +MODULE_DEVICE_TABLE(of, lpass_hm_sc7180_match_table); + +static const struct of_device_id lpass_core_cc_sc7180_match_table[] = { { .compatible = "qcom,sc7180-lpasscorecc", - .data = lpass_core_cc_sc7180_probe, }, { } }; MODULE_DEVICE_TABLE(of, lpass_core_cc_sc7180_match_table); -static int lpass_core_sc7180_probe(struct platform_device *pdev) -{ - int (*clk_probe)(struct platform_device *p); - int ret; - - pm_runtime_enable(&pdev->dev); - ret = devm_add_action_or_reset(&pdev->dev, lpass_pm_runtime_disable, &pdev->dev); - if (ret) - return ret; - - ret = pm_clk_create(&pdev->dev); - if (ret) - return ret; - ret = devm_add_action_or_reset(&pdev->dev, lpass_pm_clk_destroy, &pdev->dev); - if (ret) - return ret; - - ret = pm_clk_add(&pdev->dev, "iface"); - if (ret < 0) { - dev_err(&pdev->dev, "failed to acquire iface clock\n"); - return ret; - } - - clk_probe = of_device_get_match_data(&pdev->dev); - if (!clk_probe) - return -EINVAL; - - return clk_probe(pdev); -} - static const struct dev_pm_ops lpass_core_cc_pm_ops = { SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL) }; static struct platform_driver lpass_core_cc_sc7180_driver = { - .probe = lpass_core_sc7180_probe, + .probe = lpass_core_cc_sc7180_probe, .driver = { .name = "lpass_core_cc-sc7180", .of_match_table = lpass_core_cc_sc7180_match_table, @@ -465,17 +470,37 @@ static struct platform_driver lpass_core_cc_sc7180_driver = { }, }; -static int __init lpass_core_cc_sc7180_init(void) +static const struct dev_pm_ops lpass_hm_pm_ops = { + SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL) +}; + +static struct platform_driver lpass_hm_sc7180_driver = { + .probe = lpass_hm_core_probe, + .driver = { + .name = "lpass_hm-sc7180", + .of_match_table = lpass_hm_sc7180_match_table, + .pm = &lpass_hm_pm_ops, + }, +}; + +static int __init lpass_sc7180_init(void) { - return platform_driver_register(&lpass_core_cc_sc7180_driver); + int ret; + + ret = platform_driver_register(&lpass_core_cc_sc7180_driver); + if (ret) + return ret; + + return platform_driver_register(&lpass_hm_sc7180_driver); } -subsys_initcall(lpass_core_cc_sc7180_init); +subsys_initcall(lpass_sc7180_init); -static void __exit lpass_core_cc_sc7180_exit(void) +static void __exit lpass_sc7180_exit(void) { + platform_driver_unregister(&lpass_hm_sc7180_driver); platform_driver_unregister(&lpass_core_cc_sc7180_driver); } -module_exit(lpass_core_cc_sc7180_exit); +module_exit(lpass_sc7180_exit); MODULE_DESCRIPTION("QTI LPASS_CORE_CC SC7180 Driver"); MODULE_LICENSE("GPL v2"); -- 2.29.0.rc1.297.gfa9743e501-goog ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v5 2/2] clk: qcom: lpass-sc7180: Disentangle the two clock devices 2020-10-19 22:49 ` [PATCH v5 2/2] clk: qcom: lpass-sc7180: Disentangle the two clock devices Douglas Anderson @ 2020-10-29 9:02 ` Taniya Das 2020-11-05 2:34 ` Stephen Boyd 1 sibling, 0 replies; 7+ messages in thread From: Taniya Das @ 2020-10-29 9:02 UTC (permalink / raw) To: Douglas Anderson, Stephen Boyd Cc: David Brown, Rajendra Nayak, linux-soc, Andy Gross, Bjorn Andersson, Michael Turquette, linux-arm-msm, linux-clk, linux-kernel Reviewed-by: Taniya Das <tdas@codeaurora.org> On 10/20/2020 4:19 AM, Douglas Anderson wrote: > The sc7180 lpass clock driver manages two different devices. These > two devices were tangled together, using one probe and a lookup to > figure out the real probe. I think it's cleaner to really separate > the probe for these two devices since they're really different things, > just both managed by the same driver. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > --- > > Note: this is now a 2-patch cleanup series with no actual bugfixes > since the problem solved by patch #3 was better solved with: > > https://lore.kernel.org/r/20201017020137.1251319-1-sboyd@kernel.org > > Changes in v5: > - Two blank lines inserted before "return" statements. > > Changes in v3: > - ("clk: qcom: lpass-sc7180: Disentangle the two clock devices") new for v3. > > drivers/clk/qcom/lpasscorecc-sc7180.c | 103 ++++++++++++++++---------- > 1 file changed, 64 insertions(+), 39 deletions(-) > > diff --git a/drivers/clk/qcom/lpasscorecc-sc7180.c b/drivers/clk/qcom/lpasscorecc-sc7180.c > index 2d15e33ec837..1a3925badd7c 100644 > --- a/drivers/clk/qcom/lpasscorecc-sc7180.c > +++ b/drivers/clk/qcom/lpasscorecc-sc7180.c > @@ -366,12 +366,39 @@ static void lpass_pm_clk_destroy(void *data) > pm_clk_destroy(data); > } > > +static int lpass_create_pm_clks(struct platform_device *pdev) > +{ > + int ret; > + > + pm_runtime_enable(&pdev->dev); > + ret = devm_add_action_or_reset(&pdev->dev, lpass_pm_runtime_disable, &pdev->dev); > + if (ret) > + return ret; > + > + ret = pm_clk_create(&pdev->dev); > + if (ret) > + return ret; > + ret = devm_add_action_or_reset(&pdev->dev, lpass_pm_clk_destroy, &pdev->dev); > + if (ret) > + return ret; > + > + ret = pm_clk_add(&pdev->dev, "iface"); > + if (ret < 0) > + dev_err(&pdev->dev, "failed to acquire iface clock\n"); > + > + return ret; > +} > + > static int lpass_core_cc_sc7180_probe(struct platform_device *pdev) > { > const struct qcom_cc_desc *desc; > struct regmap *regmap; > int ret; > > + ret = lpass_create_pm_clks(pdev); > + if (ret) > + return ret; > + > lpass_core_cc_sc7180_regmap_config.name = "lpass_audio_cc"; > desc = &lpass_audio_hm_sc7180_desc; > ret = qcom_cc_probe_by_index(pdev, 1, desc); > @@ -402,6 +429,11 @@ static int lpass_core_cc_sc7180_probe(struct platform_device *pdev) > static int lpass_hm_core_probe(struct platform_device *pdev) > { > const struct qcom_cc_desc *desc; > + int ret; > + > + ret = lpass_create_pm_clks(pdev); > + if (ret) > + return ret; > > lpass_core_cc_sc7180_regmap_config.name = "lpass_hm_core"; > desc = &lpass_core_hm_sc7180_desc; > @@ -409,55 +441,28 @@ static int lpass_hm_core_probe(struct platform_device *pdev) > return qcom_cc_probe_by_index(pdev, 0, desc); > } > > -static const struct of_device_id lpass_core_cc_sc7180_match_table[] = { > +static const struct of_device_id lpass_hm_sc7180_match_table[] = { > { > .compatible = "qcom,sc7180-lpasshm", > - .data = lpass_hm_core_probe, > }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, lpass_hm_sc7180_match_table); > + > +static const struct of_device_id lpass_core_cc_sc7180_match_table[] = { > { > .compatible = "qcom,sc7180-lpasscorecc", > - .data = lpass_core_cc_sc7180_probe, > }, > { } > }; > MODULE_DEVICE_TABLE(of, lpass_core_cc_sc7180_match_table); > > -static int lpass_core_sc7180_probe(struct platform_device *pdev) > -{ > - int (*clk_probe)(struct platform_device *p); > - int ret; > - > - pm_runtime_enable(&pdev->dev); > - ret = devm_add_action_or_reset(&pdev->dev, lpass_pm_runtime_disable, &pdev->dev); > - if (ret) > - return ret; > - > - ret = pm_clk_create(&pdev->dev); > - if (ret) > - return ret; > - ret = devm_add_action_or_reset(&pdev->dev, lpass_pm_clk_destroy, &pdev->dev); > - if (ret) > - return ret; > - > - ret = pm_clk_add(&pdev->dev, "iface"); > - if (ret < 0) { > - dev_err(&pdev->dev, "failed to acquire iface clock\n"); > - return ret; > - } > - > - clk_probe = of_device_get_match_data(&pdev->dev); > - if (!clk_probe) > - return -EINVAL; > - > - return clk_probe(pdev); > -} > - > static const struct dev_pm_ops lpass_core_cc_pm_ops = { > SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL) > }; > > static struct platform_driver lpass_core_cc_sc7180_driver = { > - .probe = lpass_core_sc7180_probe, > + .probe = lpass_core_cc_sc7180_probe, > .driver = { > .name = "lpass_core_cc-sc7180", > .of_match_table = lpass_core_cc_sc7180_match_table, > @@ -465,17 +470,37 @@ static struct platform_driver lpass_core_cc_sc7180_driver = { > }, > }; > > -static int __init lpass_core_cc_sc7180_init(void) > +static const struct dev_pm_ops lpass_hm_pm_ops = { > + SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL) > +}; > + > +static struct platform_driver lpass_hm_sc7180_driver = { > + .probe = lpass_hm_core_probe, > + .driver = { > + .name = "lpass_hm-sc7180", > + .of_match_table = lpass_hm_sc7180_match_table, > + .pm = &lpass_hm_pm_ops, > + }, > +}; > + > +static int __init lpass_sc7180_init(void) > { > - return platform_driver_register(&lpass_core_cc_sc7180_driver); > + int ret; > + > + ret = platform_driver_register(&lpass_core_cc_sc7180_driver); > + if (ret) > + return ret; > + > + return platform_driver_register(&lpass_hm_sc7180_driver); > } > -subsys_initcall(lpass_core_cc_sc7180_init); > +subsys_initcall(lpass_sc7180_init); > > -static void __exit lpass_core_cc_sc7180_exit(void) > +static void __exit lpass_sc7180_exit(void) > { > + platform_driver_unregister(&lpass_hm_sc7180_driver); > platform_driver_unregister(&lpass_core_cc_sc7180_driver); > } > -module_exit(lpass_core_cc_sc7180_exit); > +module_exit(lpass_sc7180_exit); > > MODULE_DESCRIPTION("QTI LPASS_CORE_CC SC7180 Driver"); > MODULE_LICENSE("GPL v2"); > -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation. -- ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v5 2/2] clk: qcom: lpass-sc7180: Disentangle the two clock devices 2020-10-19 22:49 ` [PATCH v5 2/2] clk: qcom: lpass-sc7180: Disentangle the two clock devices Douglas Anderson 2020-10-29 9:02 ` Taniya Das @ 2020-11-05 2:34 ` Stephen Boyd 1 sibling, 0 replies; 7+ messages in thread From: Stephen Boyd @ 2020-11-05 2:34 UTC (permalink / raw) To: Douglas Anderson Cc: Taniya Das, David Brown, Rajendra Nayak, linux-soc, Douglas Anderson, Andy Gross, Bjorn Andersson, Michael Turquette, linux-arm-msm, linux-clk, linux-kernel Quoting Douglas Anderson (2020-10-19 15:49:35) > The sc7180 lpass clock driver manages two different devices. These > two devices were tangled together, using one probe and a lookup to > figure out the real probe. I think it's cleaner to really separate > the probe for these two devices since they're really different things, > just both managed by the same driver. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > --- Applied to clk-next ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v5 1/2] clk: qcom: lpasscc-sc7810: Use devm in probe 2020-10-19 22:49 [PATCH v5 1/2] clk: qcom: lpasscc-sc7810: Use devm in probe Douglas Anderson 2020-10-19 22:49 ` [PATCH v5 2/2] clk: qcom: lpass-sc7180: Disentangle the two clock devices Douglas Anderson @ 2020-10-29 9:02 ` Taniya Das 2020-11-05 2:34 ` Stephen Boyd 2020-12-29 20:15 ` patchwork-bot+linux-arm-msm 3 siblings, 0 replies; 7+ messages in thread From: Taniya Das @ 2020-10-29 9:02 UTC (permalink / raw) To: Douglas Anderson, Stephen Boyd Cc: David Brown, Rajendra Nayak, linux-soc, Andy Gross, Bjorn Andersson, Michael Turquette, linux-arm-msm, linux-clk, linux-kernel Reviewed-by: Taniya Das <tdas@codeaurora.org> On 10/20/2020 4:19 AM, Douglas Anderson wrote: > Let's convert the lpass clock control driver to use devm. This is a > few more lines of code, but it will be useful in a later patch which > disentangles the two devices handled by this driver. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > --- > > (no changes since v4) > > Changes in v4: > - Fixed typo lapss => lpass > - Moved lpass_pm_runtime_disable() lpass_pm_clk_destroy() in file. > > Changes in v3: > - ("clk: qcom: lpasscc-sc7810: Use devm in probe") new for v3. > > drivers/clk/qcom/lpasscorecc-sc7180.c | 38 +++++++++++++++------------ > 1 file changed, 21 insertions(+), 17 deletions(-) > > diff --git a/drivers/clk/qcom/lpasscorecc-sc7180.c b/drivers/clk/qcom/lpasscorecc-sc7180.c > index 228d08f5d26f..2d15e33ec837 100644 > --- a/drivers/clk/qcom/lpasscorecc-sc7180.c > +++ b/drivers/clk/qcom/lpasscorecc-sc7180.c > @@ -356,6 +356,16 @@ static const struct qcom_cc_desc lpass_audio_hm_sc7180_desc = { > .num_gdscs = ARRAY_SIZE(lpass_audio_hm_sc7180_gdscs), > }; > > +static void lpass_pm_runtime_disable(void *data) > +{ > + pm_runtime_disable(data); > +} > + > +static void lpass_pm_clk_destroy(void *data) > +{ > + pm_clk_destroy(data); > +} > + > static int lpass_core_cc_sc7180_probe(struct platform_device *pdev) > { > const struct qcom_cc_desc *desc; > @@ -418,34 +428,28 @@ static int lpass_core_sc7180_probe(struct platform_device *pdev) > int ret; > > pm_runtime_enable(&pdev->dev); > + ret = devm_add_action_or_reset(&pdev->dev, lpass_pm_runtime_disable, &pdev->dev); > + if (ret) > + return ret; > + > ret = pm_clk_create(&pdev->dev); > if (ret) > - goto disable_pm_runtime; > + return ret; > + ret = devm_add_action_or_reset(&pdev->dev, lpass_pm_clk_destroy, &pdev->dev); > + if (ret) > + return ret; > > ret = pm_clk_add(&pdev->dev, "iface"); > if (ret < 0) { > dev_err(&pdev->dev, "failed to acquire iface clock\n"); > - goto destroy_pm_clk; > + return ret; > } > > - ret = -EINVAL; > clk_probe = of_device_get_match_data(&pdev->dev); > if (!clk_probe) > - goto destroy_pm_clk; > - > - ret = clk_probe(pdev); > - if (ret) > - goto destroy_pm_clk; > - > - return 0; > - > -destroy_pm_clk: > - pm_clk_destroy(&pdev->dev); > - > -disable_pm_runtime: > - pm_runtime_disable(&pdev->dev); > + return -EINVAL; > > - return ret; > + return clk_probe(pdev); > } > > static const struct dev_pm_ops lpass_core_cc_pm_ops = { > -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation. -- ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v5 1/2] clk: qcom: lpasscc-sc7810: Use devm in probe 2020-10-19 22:49 [PATCH v5 1/2] clk: qcom: lpasscc-sc7810: Use devm in probe Douglas Anderson 2020-10-19 22:49 ` [PATCH v5 2/2] clk: qcom: lpass-sc7180: Disentangle the two clock devices Douglas Anderson 2020-10-29 9:02 ` [PATCH v5 1/2] clk: qcom: lpasscc-sc7810: Use devm in probe Taniya Das @ 2020-11-05 2:34 ` Stephen Boyd 2020-12-29 20:15 ` patchwork-bot+linux-arm-msm 3 siblings, 0 replies; 7+ messages in thread From: Stephen Boyd @ 2020-11-05 2:34 UTC (permalink / raw) To: Douglas Anderson Cc: Taniya Das, David Brown, Rajendra Nayak, linux-soc, Douglas Anderson, Andy Gross, Bjorn Andersson, Michael Turquette, linux-arm-msm, linux-clk, linux-kernel Quoting Douglas Anderson (2020-10-19 15:49:34) > Let's convert the lpass clock control driver to use devm. This is a > few more lines of code, but it will be useful in a later patch which > disentangles the two devices handled by this driver. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > --- This pattern is common. We should consider pulling this into qcom/core.c and consolidating code a bit. Applied to clk-next ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v5 1/2] clk: qcom: lpasscc-sc7810: Use devm in probe 2020-10-19 22:49 [PATCH v5 1/2] clk: qcom: lpasscc-sc7810: Use devm in probe Douglas Anderson ` (2 preceding siblings ...) 2020-11-05 2:34 ` Stephen Boyd @ 2020-12-29 20:15 ` patchwork-bot+linux-arm-msm 3 siblings, 0 replies; 7+ messages in thread From: patchwork-bot+linux-arm-msm @ 2020-12-29 20:15 UTC (permalink / raw) To: Douglas Anderson; +Cc: linux-arm-msm Hello: This series was applied to qcom/linux.git (refs/heads/for-next): On Mon, 19 Oct 2020 15:49:34 -0700 you wrote: > Let's convert the lpass clock control driver to use devm. This is a > few more lines of code, but it will be useful in a later patch which > disentangles the two devices handled by this driver. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > --- > > [...] Here is the summary with links: - [v5,1/2] clk: qcom: lpasscc-sc7810: Use devm in probe https://git.kernel.org/qcom/c/7635622b77b5 - [v5,2/2] clk: qcom: lpass-sc7180: Disentangle the two clock devices https://git.kernel.org/qcom/c/4ee9fe3e292b You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-12-29 20:17 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-10-19 22:49 [PATCH v5 1/2] clk: qcom: lpasscc-sc7810: Use devm in probe Douglas Anderson 2020-10-19 22:49 ` [PATCH v5 2/2] clk: qcom: lpass-sc7180: Disentangle the two clock devices Douglas Anderson 2020-10-29 9:02 ` Taniya Das 2020-11-05 2:34 ` Stephen Boyd 2020-10-29 9:02 ` [PATCH v5 1/2] clk: qcom: lpasscc-sc7810: Use devm in probe Taniya Das 2020-11-05 2:34 ` Stephen Boyd 2020-12-29 20:15 ` patchwork-bot+linux-arm-msm
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).