[PATCH] interconnect: qcom: msm8916: Remove rpm-ids from non-RPM nodes

[PATCH] interconnect: qcom: msm8916: Remove rpm-ids from non-RPM nodes

[Georgi Djakov]

Some nodes are incorrectly marked as RPM-controlled (they have RPM
master and slave ids assigned), but are actually controlled by the
application CPU instead. The RPM complains when we send requests for
resources that it can't control. Let's fix this by replacing the IDs,
with the default "-1" in which case no requests are sent.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
 drivers/interconnect/qcom/msm8916.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/interconnect/qcom/msm8916.c b/drivers/interconnect/qcom/msm8916.c
index 93cb675e5806..5d4ac364be8c 100644
--- a/drivers/interconnect/qcom/msm8916.c
+++ b/drivers/interconnect/qcom/msm8916.c
@@ -182,7 +182,7 @@ DEFINE_QNODE(mas_pcnoc_sdcc_1, MSM8916_MASTER_SDCC_1, 8, -1, -1, MSM8916_PNOC_IN
 DEFINE_QNODE(mas_pcnoc_sdcc_2, MSM8916_MASTER_SDCC_2, 8, -1, -1, MSM8916_PNOC_INT_1);
 DEFINE_QNODE(mas_qdss_bam, MSM8916_MASTER_QDSS_BAM, 8, -1, -1, MSM8916_SNOC_QDSS_INT);
 DEFINE_QNODE(mas_qdss_etr, MSM8916_MASTER_QDSS_ETR, 8, -1, -1, MSM8916_SNOC_QDSS_INT);
-DEFINE_QNODE(mas_snoc_cfg, MSM8916_MASTER_SNOC_CFG, 4, 20, -1, MSM8916_SNOC_QDSS_INT);
+DEFINE_QNODE(mas_snoc_cfg, MSM8916_MASTER_SNOC_CFG, 4, -1, -1, MSM8916_SNOC_QDSS_INT);
 DEFINE_QNODE(mas_spdm, MSM8916_MASTER_SPDM, 4, -1, -1, MSM8916_PNOC_MAS_0);
 DEFINE_QNODE(mas_tcu0, MSM8916_MASTER_TCU0, 8, -1, -1, MSM8916_SLAVE_EBI_CH0, MSM8916_BIMC_SNOC_MAS, MSM8916_SLAVE_AMPSS_L2);
 DEFINE_QNODE(mas_tcu1, MSM8916_MASTER_TCU1, 8, -1, -1, MSM8916_SLAVE_EBI_CH0, MSM8916_BIMC_SNOC_MAS, MSM8916_SLAVE_AMPSS_L2);
@@ -208,14 +208,14 @@ DEFINE_QNODE(pcnoc_snoc_mas, MSM8916_PNOC_SNOC_MAS, 8, 29, -1, MSM8916_PNOC_SNOC
 DEFINE_QNODE(pcnoc_snoc_slv, MSM8916_PNOC_SNOC_SLV, 8, -1, 45, MSM8916_SNOC_INT_0, MSM8916_SNOC_INT_BIMC, MSM8916_SNOC_INT_1);
 DEFINE_QNODE(qdss_int, MSM8916_SNOC_QDSS_INT, 8, -1, -1, MSM8916_SNOC_INT_0, MSM8916_SNOC_INT_BIMC);
 DEFINE_QNODE(slv_apps_l2, MSM8916_SLAVE_AMPSS_L2, 8, -1, -1, 0);
-DEFINE_QNODE(slv_apss, MSM8916_SLAVE_APSS, 4, -1, 20, 0);
+DEFINE_QNODE(slv_apss, MSM8916_SLAVE_APSS, 4, -1, -1, 0);
 DEFINE_QNODE(slv_audio, MSM8916_SLAVE_LPASS, 4, -1, -1, 0);
 DEFINE_QNODE(slv_bimc_cfg, MSM8916_SLAVE_BIMC_CFG, 4, -1, -1, 0);
 DEFINE_QNODE(slv_blsp_1, MSM8916_SLAVE_BLSP_1, 4, -1, -1, 0);
 DEFINE_QNODE(slv_boot_rom, MSM8916_SLAVE_BOOT_ROM, 4, -1, -1, 0);
 DEFINE_QNODE(slv_camera_cfg, MSM8916_SLAVE_CAMERA_CFG, 4, -1, -1, 0);
-DEFINE_QNODE(slv_cats_0, MSM8916_SLAVE_CATS_128, 16, -1, 106, 0);
-DEFINE_QNODE(slv_cats_1, MSM8916_SLAVE_OCMEM_64, 8, -1, 107, 0);
+DEFINE_QNODE(slv_cats_0, MSM8916_SLAVE_CATS_128, 16, -1, -1, 0);
+DEFINE_QNODE(slv_cats_1, MSM8916_SLAVE_OCMEM_64, 8, -1, -1, 0);
 DEFINE_QNODE(slv_clk_ctl, MSM8916_SLAVE_CLK_CTL, 4, -1, -1, 0);
 DEFINE_QNODE(slv_crypto_0_cfg, MSM8916_SLAVE_CRYPTO_0_CFG, 4, -1, -1, 0);
 DEFINE_QNODE(slv_dehr_cfg, MSM8916_SLAVE_DEHR_CFG, 4, -1, -1, 0);
@@ -239,7 +239,7 @@ DEFINE_QNODE(slv_sdcc_2, MSM8916_SLAVE_SDCC_2, 4, -1, -1, 0);
 DEFINE_QNODE(slv_security, MSM8916_SLAVE_SECURITY, 4, -1, -1, 0);
 DEFINE_QNODE(slv_snoc_cfg, MSM8916_SLAVE_SNOC_CFG, 4, -1, -1, 0);
 DEFINE_QNODE(slv_spdm, MSM8916_SLAVE_SPDM, 4, -1, -1, 0);
-DEFINE_QNODE(slv_srvc_snoc, MSM8916_SLAVE_SRVC_SNOC, 8, -1, 29, 0);
+DEFINE_QNODE(slv_srvc_snoc, MSM8916_SLAVE_SRVC_SNOC, 8, -1, -1, 0);
 DEFINE_QNODE(slv_tcsr, MSM8916_SLAVE_TCSR, 4, -1, -1, 0);
 DEFINE_QNODE(slv_tlmm, MSM8916_SLAVE_TLMM, 4, -1, -1, 0);
 DEFINE_QNODE(slv_usb_hs, MSM8916_SLAVE_USB_HS, 4, -1, -1, 0);
@@ -249,7 +249,7 @@ DEFINE_QNODE(snoc_bimc_0_slv, MSM8916_SNOC_BIMC_0_SLV, 8, -1, 24, MSM8916_SLAVE_
 DEFINE_QNODE(snoc_bimc_1_mas, MSM8916_SNOC_BIMC_1_MAS, 16, -1, -1, MSM8916_SNOC_BIMC_1_SLV);
 DEFINE_QNODE(snoc_bimc_1_slv, MSM8916_SNOC_BIMC_1_SLV, 8, -1, -1, MSM8916_SLAVE_EBI_CH0);
 DEFINE_QNODE(snoc_int_0, MSM8916_SNOC_INT_0, 8, 99, 130, MSM8916_SLAVE_QDSS_STM, MSM8916_SLAVE_IMEM, MSM8916_SNOC_PNOC_MAS);
-DEFINE_QNODE(snoc_int_1, MSM8916_SNOC_INT_1, 8, 100, 131, MSM8916_SLAVE_APSS, MSM8916_SLAVE_CATS_128, MSM8916_SLAVE_OCMEM_64);
+DEFINE_QNODE(snoc_int_1, MSM8916_SNOC_INT_1, 8, -1, -1, MSM8916_SLAVE_APSS, MSM8916_SLAVE_CATS_128, MSM8916_SLAVE_OCMEM_64);
 DEFINE_QNODE(snoc_int_bimc, MSM8916_SNOC_INT_BIMC, 8, 101, 132, MSM8916_SNOC_BIMC_0_MAS);
 DEFINE_QNODE(snoc_pcnoc_mas, MSM8916_SNOC_PNOC_MAS, 8, -1, -1, MSM8916_SNOC_PNOC_SLV);
 DEFINE_QNODE(snoc_pcnoc_slv, MSM8916_SNOC_PNOC_SLV, 8, -1, -1, MSM8916_PNOC_INT_0);

Re: [PATCH] interconnect: qcom: msm8916: Remove rpm-ids from non-RPM nodes

[Mike Tipton]

On 11/12/2020 2:51 AM, Georgi Djakov wrote:
> Some nodes are incorrectly marked as RPM-controlled (they have RPM
> master and slave ids assigned), but are actually controlled by the
> application CPU instead. The RPM complains when we send requests for
> resources that it can't control. Let's fix this by replacing the IDs,
> with the default "-1" in which case no requests are sent.
> 
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>

Reviewed-by: Mike Tipton <mdtipton@codeaurora.org>

Re: [PATCH] interconnect: qcom: msm8916: Remove rpm-ids from non-RPM nodes

[patchwork-bot+linux-arm-msm]

Hello:

This patch was applied to qcom/linux.git (refs/heads/for-next):

On Thu, 12 Nov 2020 12:51:40 +0200 you wrote:
> Some nodes are incorrectly marked as RPM-controlled (they have RPM
> master and slave ids assigned), but are actually controlled by the
> application CPU instead. The RPM complains when we send requests for
> resources that it can't control. Let's fix this by replacing the IDs,
> with the default "-1" in which case no requests are sent.
> 
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> 
> [...]

Here is the summary with links:
  - interconnect: qcom: msm8916: Remove rpm-ids from non-RPM nodes
    https://git.kernel.org/qcom/c/c497f9322af9

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html