* [PATCH V1] clk: qcom: gcc-sc7180: Mark the MM XO clocks to be always ON
@ 2021-01-20 7:47 Taniya Das
2021-01-20 9:16 ` AngeloGioacchino Del Regno
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Taniya Das @ 2021-01-20 7:47 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette
Cc: Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk,
linux-kernel, Taniya Das
There are intermittent GDSC power-up failures observed for titan top
gdsc, which requires the XO clock. Thus mark all the MM XO clocks always
enabled from probe.
Fixes: 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
drivers/clk/qcom/gcc-sc7180.c | 47 ++++---------------------------------------
1 file changed, 4 insertions(+), 43 deletions(-)
diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
index b05901b..88e896a 100644
--- a/drivers/clk/qcom/gcc-sc7180.c
+++ b/drivers/clk/qcom/gcc-sc7180.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved.
*/
#include <linux/clk-provider.h>
@@ -919,19 +919,6 @@ static struct clk_branch gcc_camera_throttle_hf_axi_clk = {
},
};
-static struct clk_branch gcc_camera_xo_clk = {
- .halt_reg = 0xb02c,
- .halt_check = BRANCH_HALT,
- .clkr = {
- .enable_reg = 0xb02c,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_camera_xo_clk",
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gcc_ce1_ahb_clk = {
.halt_reg = 0x4100c,
.halt_check = BRANCH_HALT_VOTED,
@@ -1096,19 +1083,6 @@ static struct clk_branch gcc_disp_throttle_hf_axi_clk = {
},
};
-static struct clk_branch gcc_disp_xo_clk = {
- .halt_reg = 0xb030,
- .halt_check = BRANCH_HALT,
- .clkr = {
- .enable_reg = 0xb030,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_disp_xo_clk",
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gcc_gp1_clk = {
.halt_reg = 0x64000,
.halt_check = BRANCH_HALT,
@@ -2159,19 +2133,6 @@ static struct clk_branch gcc_video_throttle_axi_clk = {
},
};
-static struct clk_branch gcc_video_xo_clk = {
- .halt_reg = 0xb028,
- .halt_check = BRANCH_HALT,
- .clkr = {
- .enable_reg = 0xb028,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_video_xo_clk",
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gcc_mss_cfg_ahb_clk = {
.halt_reg = 0x8a000,
.halt_check = BRANCH_HALT,
@@ -2304,7 +2265,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
[GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr,
[GCC_CAMERA_HF_AXI_CLK] = &gcc_camera_hf_axi_clk.clkr,
[GCC_CAMERA_THROTTLE_HF_AXI_CLK] = &gcc_camera_throttle_hf_axi_clk.clkr,
- [GCC_CAMERA_XO_CLK] = &gcc_camera_xo_clk.clkr,
[GCC_CE1_AHB_CLK] = &gcc_ce1_ahb_clk.clkr,
[GCC_CE1_AXI_CLK] = &gcc_ce1_axi_clk.clkr,
[GCC_CE1_CLK] = &gcc_ce1_clk.clkr,
@@ -2317,7 +2277,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
[GCC_DISP_GPLL0_DIV_CLK_SRC] = &gcc_disp_gpll0_div_clk_src.clkr,
[GCC_DISP_HF_AXI_CLK] = &gcc_disp_hf_axi_clk.clkr,
[GCC_DISP_THROTTLE_HF_AXI_CLK] = &gcc_disp_throttle_hf_axi_clk.clkr,
- [GCC_DISP_XO_CLK] = &gcc_disp_xo_clk.clkr,
[GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
[GCC_GP1_CLK_SRC] = &gcc_gp1_clk_src.clkr,
[GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
@@ -2413,7 +2372,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
[GCC_VIDEO_AXI_CLK] = &gcc_video_axi_clk.clkr,
[GCC_VIDEO_GPLL0_DIV_CLK_SRC] = &gcc_video_gpll0_div_clk_src.clkr,
[GCC_VIDEO_THROTTLE_AXI_CLK] = &gcc_video_throttle_axi_clk.clkr,
- [GCC_VIDEO_XO_CLK] = &gcc_video_xo_clk.clkr,
[GPLL0] = &gpll0.clkr,
[GPLL0_OUT_EVEN] = &gpll0_out_even.clkr,
[GPLL6] = &gpll6.clkr,
@@ -2510,6 +2468,9 @@ static int gcc_sc7180_probe(struct platform_device *pdev)
regmap_update_bits(regmap, 0x0b004, BIT(0), BIT(0));
regmap_update_bits(regmap, 0x0b008, BIT(0), BIT(0));
regmap_update_bits(regmap, 0x0b00c, BIT(0), BIT(0));
+ regmap_update_bits(regmap, 0x0b02c, BIT(0), BIT(0));
+ regmap_update_bits(regmap, 0x0b028, BIT(0), BIT(0));
+ regmap_update_bits(regmap, 0x0b030, BIT(0), BIT(0));
regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));
ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH V1] clk: qcom: gcc-sc7180: Mark the MM XO clocks to be always ON
2021-01-20 7:47 [PATCH V1] clk: qcom: gcc-sc7180: Mark the MM XO clocks to be always ON Taniya Das
@ 2021-01-20 9:16 ` AngeloGioacchino Del Regno
2021-01-21 2:46 ` Stephen Boyd
2021-01-20 22:40 ` Bjorn Andersson
2021-02-08 17:53 ` Stephen Boyd
2 siblings, 1 reply; 6+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-01-20 9:16 UTC (permalink / raw)
To: Taniya Das, Stephen Boyd, Michael Turquette
Cc: Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk, linux-kernel
Il 20/01/21 08:47, Taniya Das ha scritto:
> There are intermittent GDSC power-up failures observed for titan top
> gdsc, which requires the XO clock. Thus mark all the MM XO clocks always
> enabled from probe.
>
Hello Tanya,
> Fixes: 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones")
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---
> drivers/clk/qcom/gcc-sc7180.c | 47 ++++---------------------------------------
> 1 file changed, 4 insertions(+), 43 deletions(-)
>
> --
> Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
> of the Code Aurora Forum, hosted by the Linux Foundation.
>
> diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
> index b05901b..88e896a 100644
> --- a/drivers/clk/qcom/gcc-sc7180.c
> +++ b/drivers/clk/qcom/gcc-sc7180.c
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0-only
> /*
> - * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved.
> */
>
> #include <linux/clk-provider.h>
> @@ -919,19 +919,6 @@ static struct clk_branch gcc_camera_throttle_hf_axi_clk = {
> },
> };
>
> -static struct clk_branch gcc_camera_xo_clk = {
> - .halt_reg = 0xb02c,
> - .halt_check = BRANCH_HALT,
> - .clkr = {
> - .enable_reg = 0xb02c,
> - .enable_mask = BIT(0),
> - .hw.init = &(struct clk_init_data){
> - .name = "gcc_camera_xo_clk",
> - .ops = &clk_branch2_ops,
> - },
> - },
> -};
> -
Why are you avoiding to register these clocks entirely?
If this is needed by the Titan GDSC, this clock "does indeed exist".
If these clocks shall never be turned off, then you should add the
CLK_IS_CRITICAL flag and perhaps add a comment explaining why.
> static struct clk_branch gcc_ce1_ahb_clk = {
> .halt_reg = 0x4100c,
> .halt_check = BRANCH_HALT_VOTED,
> @@ -1096,19 +1083,6 @@ static struct clk_branch gcc_disp_throttle_hf_axi_clk = {
> },
> };
>
> -static struct clk_branch gcc_disp_xo_clk = {
> - .halt_reg = 0xb030,
> - .halt_check = BRANCH_HALT,
> - .clkr = {
> - .enable_reg = 0xb030,
> - .enable_mask = BIT(0),
> - .hw.init = &(struct clk_init_data){
> - .name = "gcc_disp_xo_clk",
> - .ops = &clk_branch2_ops,
> - },
> - },
> -};
> -
Same here.
> static struct clk_branch gcc_gp1_clk = {
> .halt_reg = 0x64000,
> .halt_check = BRANCH_HALT,
> @@ -2159,19 +2133,6 @@ static struct clk_branch gcc_video_throttle_axi_clk = {
> },
> };
>
> -static struct clk_branch gcc_video_xo_clk = {
> - .halt_reg = 0xb028,
> - .halt_check = BRANCH_HALT,
> - .clkr = {
> - .enable_reg = 0xb028,
> - .enable_mask = BIT(0),
> - .hw.init = &(struct clk_init_data){
> - .name = "gcc_video_xo_clk",
> - .ops = &clk_branch2_ops,
> - },
> - },
> -};
> -
...and here.
> static struct clk_branch gcc_mss_cfg_ahb_clk = {
> .halt_reg = 0x8a000,
> .halt_check = BRANCH_HALT,
> @@ -2304,7 +2265,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
> [GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr,
> [GCC_CAMERA_HF_AXI_CLK] = &gcc_camera_hf_axi_clk.clkr,
> [GCC_CAMERA_THROTTLE_HF_AXI_CLK] = &gcc_camera_throttle_hf_axi_clk.clkr,
> - [GCC_CAMERA_XO_CLK] = &gcc_camera_xo_clk.clkr,
> [GCC_CE1_AHB_CLK] = &gcc_ce1_ahb_clk.clkr,
> [GCC_CE1_AXI_CLK] = &gcc_ce1_axi_clk.clkr,
> [GCC_CE1_CLK] = &gcc_ce1_clk.clkr,
> @@ -2317,7 +2277,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
> [GCC_DISP_GPLL0_DIV_CLK_SRC] = &gcc_disp_gpll0_div_clk_src.clkr,
> [GCC_DISP_HF_AXI_CLK] = &gcc_disp_hf_axi_clk.clkr,
> [GCC_DISP_THROTTLE_HF_AXI_CLK] = &gcc_disp_throttle_hf_axi_clk.clkr,
> - [GCC_DISP_XO_CLK] = &gcc_disp_xo_clk.clkr,
> [GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
> [GCC_GP1_CLK_SRC] = &gcc_gp1_clk_src.clkr,
> [GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
> @@ -2413,7 +2372,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
> [GCC_VIDEO_AXI_CLK] = &gcc_video_axi_clk.clkr,
> [GCC_VIDEO_GPLL0_DIV_CLK_SRC] = &gcc_video_gpll0_div_clk_src.clkr,
> [GCC_VIDEO_THROTTLE_AXI_CLK] = &gcc_video_throttle_axi_clk.clkr,
> - [GCC_VIDEO_XO_CLK] = &gcc_video_xo_clk.clkr,
> [GPLL0] = &gpll0.clkr,
> [GPLL0_OUT_EVEN] = &gpll0_out_even.clkr,
> [GPLL6] = &gpll6.clkr,
> @@ -2510,6 +2468,9 @@ static int gcc_sc7180_probe(struct platform_device *pdev)
> regmap_update_bits(regmap, 0x0b004, BIT(0), BIT(0));
> regmap_update_bits(regmap, 0x0b008, BIT(0), BIT(0));
> regmap_update_bits(regmap, 0x0b00c, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x0b02c, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x0b028, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x0b030, BIT(0), BIT(0));
IMO, "Magic" regmap writes like these ones, even if documented, should
be avoided in this specific case, since the clocks framework accounts
for clocks that should be always-on, if provided with the right flags.
> regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));
>
> ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH V1] clk: qcom: gcc-sc7180: Mark the MM XO clocks to be always ON
2021-01-20 9:16 ` AngeloGioacchino Del Regno
@ 2021-01-21 2:46 ` Stephen Boyd
0 siblings, 0 replies; 6+ messages in thread
From: Stephen Boyd @ 2021-01-21 2:46 UTC (permalink / raw)
To: AngeloGioacchino Del Regno, Michael Turquette, Taniya Das
Cc: Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk, linux-kernel
Quoting AngeloGioacchino Del Regno (2021-01-20 01:16:17)
> Il 20/01/21 08:47, Taniya Das ha scritto:
> > There are intermittent GDSC power-up failures observed for titan top
> > gdsc, which requires the XO clock. Thus mark all the MM XO clocks always
> > enabled from probe.
> >
>
> Hello Tanya,
>
> > Fixes: 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones")
> > Signed-off-by: Taniya Das <tdas@codeaurora.org>
> > ---
> > drivers/clk/qcom/gcc-sc7180.c | 47 ++++---------------------------------------
> > 1 file changed, 4 insertions(+), 43 deletions(-)
> >
> > --
> > Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
> > of the Code Aurora Forum, hosted by the Linux Foundation.
> >
> > diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
> > index b05901b..88e896a 100644
> > --- a/drivers/clk/qcom/gcc-sc7180.c
> > +++ b/drivers/clk/qcom/gcc-sc7180.c
> > @@ -1,6 +1,6 @@
> > // SPDX-License-Identifier: GPL-2.0-only
> > /*
> > - * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
> > + * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved.
> > */
> >
> > #include <linux/clk-provider.h>
> > @@ -919,19 +919,6 @@ static struct clk_branch gcc_camera_throttle_hf_axi_clk = {
> > },
> > };
> >
> > -static struct clk_branch gcc_camera_xo_clk = {
> > - .halt_reg = 0xb02c,
> > - .halt_check = BRANCH_HALT,
> > - .clkr = {
> > - .enable_reg = 0xb02c,
> > - .enable_mask = BIT(0),
> > - .hw.init = &(struct clk_init_data){
> > - .name = "gcc_camera_xo_clk",
> > - .ops = &clk_branch2_ops,
> > - },
> > - },
> > -};
> > -
>
> Why are you avoiding to register these clocks entirely?
> If this is needed by the Titan GDSC, this clock "does indeed exist".
>
> If these clocks shall never be turned off, then you should add the
> CLK_IS_CRITICAL flag and perhaps add a comment explaining why.
I'd rather not have critical clks wasting kernel memory and registration
time if they're never going to be turned off and we're basically just
writing a bit so that they're always on. This patch looks OK to me from
that perspective. There aren't any parents for these clks either so
really it's a glorified bit toggle and poll to make sure that it is
enabled. Maybe we should be checking that they're actually enabled at
the end of probe, but otherwise we don't need all this complexity.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH V1] clk: qcom: gcc-sc7180: Mark the MM XO clocks to be always ON
2021-01-20 7:47 [PATCH V1] clk: qcom: gcc-sc7180: Mark the MM XO clocks to be always ON Taniya Das
2021-01-20 9:16 ` AngeloGioacchino Del Regno
@ 2021-01-20 22:40 ` Bjorn Andersson
2021-01-21 6:49 ` Taniya Das
2021-02-08 17:53 ` Stephen Boyd
2 siblings, 1 reply; 6+ messages in thread
From: Bjorn Andersson @ 2021-01-20 22:40 UTC (permalink / raw)
To: Taniya Das
Cc: Stephen Boyd, Michael Turquette ?,
Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk,
linux-kernel
On Wed 20 Jan 01:47 CST 2021, Taniya Das wrote:
> There are intermittent GDSC power-up failures observed for titan top
> gdsc, which requires the XO clock. Thus mark all the MM XO clocks always
> enabled from probe.
>
But if this is the reason for keeping all these {ahb,xo}_clks critical
(or upstream just a bunch of hard coded regmap_update_bits()) why don't
we properly describe them as dependencies for the clock controller/gdsc?
I.e. by the use of pm_clk_add()?
Regards,
Bjorn
> Fixes: 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones")
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---
> drivers/clk/qcom/gcc-sc7180.c | 47 ++++---------------------------------------
> 1 file changed, 4 insertions(+), 43 deletions(-)
>
> diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
> index b05901b..88e896a 100644
> --- a/drivers/clk/qcom/gcc-sc7180.c
> +++ b/drivers/clk/qcom/gcc-sc7180.c
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0-only
> /*
> - * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved.
> */
>
> #include <linux/clk-provider.h>
> @@ -919,19 +919,6 @@ static struct clk_branch gcc_camera_throttle_hf_axi_clk = {
> },
> };
>
> -static struct clk_branch gcc_camera_xo_clk = {
> - .halt_reg = 0xb02c,
> - .halt_check = BRANCH_HALT,
> - .clkr = {
> - .enable_reg = 0xb02c,
> - .enable_mask = BIT(0),
> - .hw.init = &(struct clk_init_data){
> - .name = "gcc_camera_xo_clk",
> - .ops = &clk_branch2_ops,
> - },
> - },
> -};
> -
> static struct clk_branch gcc_ce1_ahb_clk = {
> .halt_reg = 0x4100c,
> .halt_check = BRANCH_HALT_VOTED,
> @@ -1096,19 +1083,6 @@ static struct clk_branch gcc_disp_throttle_hf_axi_clk = {
> },
> };
>
> -static struct clk_branch gcc_disp_xo_clk = {
> - .halt_reg = 0xb030,
> - .halt_check = BRANCH_HALT,
> - .clkr = {
> - .enable_reg = 0xb030,
> - .enable_mask = BIT(0),
> - .hw.init = &(struct clk_init_data){
> - .name = "gcc_disp_xo_clk",
> - .ops = &clk_branch2_ops,
> - },
> - },
> -};
> -
> static struct clk_branch gcc_gp1_clk = {
> .halt_reg = 0x64000,
> .halt_check = BRANCH_HALT,
> @@ -2159,19 +2133,6 @@ static struct clk_branch gcc_video_throttle_axi_clk = {
> },
> };
>
> -static struct clk_branch gcc_video_xo_clk = {
> - .halt_reg = 0xb028,
> - .halt_check = BRANCH_HALT,
> - .clkr = {
> - .enable_reg = 0xb028,
> - .enable_mask = BIT(0),
> - .hw.init = &(struct clk_init_data){
> - .name = "gcc_video_xo_clk",
> - .ops = &clk_branch2_ops,
> - },
> - },
> -};
> -
> static struct clk_branch gcc_mss_cfg_ahb_clk = {
> .halt_reg = 0x8a000,
> .halt_check = BRANCH_HALT,
> @@ -2304,7 +2265,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
> [GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr,
> [GCC_CAMERA_HF_AXI_CLK] = &gcc_camera_hf_axi_clk.clkr,
> [GCC_CAMERA_THROTTLE_HF_AXI_CLK] = &gcc_camera_throttle_hf_axi_clk.clkr,
> - [GCC_CAMERA_XO_CLK] = &gcc_camera_xo_clk.clkr,
> [GCC_CE1_AHB_CLK] = &gcc_ce1_ahb_clk.clkr,
> [GCC_CE1_AXI_CLK] = &gcc_ce1_axi_clk.clkr,
> [GCC_CE1_CLK] = &gcc_ce1_clk.clkr,
> @@ -2317,7 +2277,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
> [GCC_DISP_GPLL0_DIV_CLK_SRC] = &gcc_disp_gpll0_div_clk_src.clkr,
> [GCC_DISP_HF_AXI_CLK] = &gcc_disp_hf_axi_clk.clkr,
> [GCC_DISP_THROTTLE_HF_AXI_CLK] = &gcc_disp_throttle_hf_axi_clk.clkr,
> - [GCC_DISP_XO_CLK] = &gcc_disp_xo_clk.clkr,
> [GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
> [GCC_GP1_CLK_SRC] = &gcc_gp1_clk_src.clkr,
> [GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
> @@ -2413,7 +2372,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
> [GCC_VIDEO_AXI_CLK] = &gcc_video_axi_clk.clkr,
> [GCC_VIDEO_GPLL0_DIV_CLK_SRC] = &gcc_video_gpll0_div_clk_src.clkr,
> [GCC_VIDEO_THROTTLE_AXI_CLK] = &gcc_video_throttle_axi_clk.clkr,
> - [GCC_VIDEO_XO_CLK] = &gcc_video_xo_clk.clkr,
> [GPLL0] = &gpll0.clkr,
> [GPLL0_OUT_EVEN] = &gpll0_out_even.clkr,
> [GPLL6] = &gpll6.clkr,
> @@ -2510,6 +2468,9 @@ static int gcc_sc7180_probe(struct platform_device *pdev)
> regmap_update_bits(regmap, 0x0b004, BIT(0), BIT(0));
> regmap_update_bits(regmap, 0x0b008, BIT(0), BIT(0));
> regmap_update_bits(regmap, 0x0b00c, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x0b02c, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x0b028, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x0b030, BIT(0), BIT(0));
> regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));
>
> ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
> --
> Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
> of the Code Aurora Forum, hosted by the Linux Foundation.
>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH V1] clk: qcom: gcc-sc7180: Mark the MM XO clocks to be always ON
2021-01-20 22:40 ` Bjorn Andersson
@ 2021-01-21 6:49 ` Taniya Das
0 siblings, 0 replies; 6+ messages in thread
From: Taniya Das @ 2021-01-21 6:49 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Stephen Boyd, Michael Turquette ?,
Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk,
linux-kernel
Hi Bjorn,
On 1/21/2021 4:10 AM, Bjorn Andersson wrote:
> On Wed 20 Jan 01:47 CST 2021, Taniya Das wrote:
>
>> There are intermittent GDSC power-up failures observed for titan top
>> gdsc, which requires the XO clock. Thus mark all the MM XO clocks always
>> enabled from probe.
>>
>
> But if this is the reason for keeping all these {ahb,xo}_clks critical
> (or upstream just a bunch of hard coded regmap_update_bits()) why don't
> we properly describe them as dependencies for the clock controller/gdsc?
> I.e. by the use of pm_clk_add()?
>
> Regards,
> Bjorn
They are already defined in the camcc driver, but they are not working
as expected, thus I am forced to mark them always ON.
>
>> Fixes: 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones")
>> Signed-off-by: Taniya Das <tdas@codeaurora.org>
>> ---
>> drivers/clk/qcom/gcc-sc7180.c | 47 ++++---------------------------------------
>> 1 file changed, 4 insertions(+), 43 deletions(-)
>>
>> diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
>> index b05901b..88e896a 100644
>> --- a/drivers/clk/qcom/gcc-sc7180.c
>> +++ b/drivers/clk/qcom/gcc-sc7180.c
>> @@ -1,6 +1,6 @@
>> // SPDX-License-Identifier: GPL-2.0-only
>> /*
>> - * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved.
>> */
>>
>> #include <linux/clk-provider.h>
>> @@ -919,19 +919,6 @@ static struct clk_branch gcc_camera_throttle_hf_axi_clk = {
>> },
>> };
>>
>> -static struct clk_branch gcc_camera_xo_clk = {
>> - .halt_reg = 0xb02c,
>> - .halt_check = BRANCH_HALT,
>> - .clkr = {
>> - .enable_reg = 0xb02c,
>> - .enable_mask = BIT(0),
>> - .hw.init = &(struct clk_init_data){
>> - .name = "gcc_camera_xo_clk",
>> - .ops = &clk_branch2_ops,
>> - },
>> - },
>> -};
>> -
>> static struct clk_branch gcc_ce1_ahb_clk = {
>> .halt_reg = 0x4100c,
>> .halt_check = BRANCH_HALT_VOTED,
>> @@ -1096,19 +1083,6 @@ static struct clk_branch gcc_disp_throttle_hf_axi_clk = {
>> },
>> };
>>
>> -static struct clk_branch gcc_disp_xo_clk = {
>> - .halt_reg = 0xb030,
>> - .halt_check = BRANCH_HALT,
>> - .clkr = {
>> - .enable_reg = 0xb030,
>> - .enable_mask = BIT(0),
>> - .hw.init = &(struct clk_init_data){
>> - .name = "gcc_disp_xo_clk",
>> - .ops = &clk_branch2_ops,
>> - },
>> - },
>> -};
>> -
>> static struct clk_branch gcc_gp1_clk = {
>> .halt_reg = 0x64000,
>> .halt_check = BRANCH_HALT,
>> @@ -2159,19 +2133,6 @@ static struct clk_branch gcc_video_throttle_axi_clk = {
>> },
>> };
>>
>> -static struct clk_branch gcc_video_xo_clk = {
>> - .halt_reg = 0xb028,
>> - .halt_check = BRANCH_HALT,
>> - .clkr = {
>> - .enable_reg = 0xb028,
>> - .enable_mask = BIT(0),
>> - .hw.init = &(struct clk_init_data){
>> - .name = "gcc_video_xo_clk",
>> - .ops = &clk_branch2_ops,
>> - },
>> - },
>> -};
>> -
>> static struct clk_branch gcc_mss_cfg_ahb_clk = {
>> .halt_reg = 0x8a000,
>> .halt_check = BRANCH_HALT,
>> @@ -2304,7 +2265,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
>> [GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr,
>> [GCC_CAMERA_HF_AXI_CLK] = &gcc_camera_hf_axi_clk.clkr,
>> [GCC_CAMERA_THROTTLE_HF_AXI_CLK] = &gcc_camera_throttle_hf_axi_clk.clkr,
>> - [GCC_CAMERA_XO_CLK] = &gcc_camera_xo_clk.clkr,
>> [GCC_CE1_AHB_CLK] = &gcc_ce1_ahb_clk.clkr,
>> [GCC_CE1_AXI_CLK] = &gcc_ce1_axi_clk.clkr,
>> [GCC_CE1_CLK] = &gcc_ce1_clk.clkr,
>> @@ -2317,7 +2277,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
>> [GCC_DISP_GPLL0_DIV_CLK_SRC] = &gcc_disp_gpll0_div_clk_src.clkr,
>> [GCC_DISP_HF_AXI_CLK] = &gcc_disp_hf_axi_clk.clkr,
>> [GCC_DISP_THROTTLE_HF_AXI_CLK] = &gcc_disp_throttle_hf_axi_clk.clkr,
>> - [GCC_DISP_XO_CLK] = &gcc_disp_xo_clk.clkr,
>> [GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
>> [GCC_GP1_CLK_SRC] = &gcc_gp1_clk_src.clkr,
>> [GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
>> @@ -2413,7 +2372,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
>> [GCC_VIDEO_AXI_CLK] = &gcc_video_axi_clk.clkr,
>> [GCC_VIDEO_GPLL0_DIV_CLK_SRC] = &gcc_video_gpll0_div_clk_src.clkr,
>> [GCC_VIDEO_THROTTLE_AXI_CLK] = &gcc_video_throttle_axi_clk.clkr,
>> - [GCC_VIDEO_XO_CLK] = &gcc_video_xo_clk.clkr,
>> [GPLL0] = &gpll0.clkr,
>> [GPLL0_OUT_EVEN] = &gpll0_out_even.clkr,
>> [GPLL6] = &gpll6.clkr,
>> @@ -2510,6 +2468,9 @@ static int gcc_sc7180_probe(struct platform_device *pdev)
>> regmap_update_bits(regmap, 0x0b004, BIT(0), BIT(0));
>> regmap_update_bits(regmap, 0x0b008, BIT(0), BIT(0));
>> regmap_update_bits(regmap, 0x0b00c, BIT(0), BIT(0));
>> + regmap_update_bits(regmap, 0x0b02c, BIT(0), BIT(0));
>> + regmap_update_bits(regmap, 0x0b028, BIT(0), BIT(0));
>> + regmap_update_bits(regmap, 0x0b030, BIT(0), BIT(0));
>> regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));
>>
>> ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
>> --
>> Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
>> of the Code Aurora Forum, hosted by the Linux Foundation.
>>
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
--
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH V1] clk: qcom: gcc-sc7180: Mark the MM XO clocks to be always ON
2021-01-20 7:47 [PATCH V1] clk: qcom: gcc-sc7180: Mark the MM XO clocks to be always ON Taniya Das
2021-01-20 9:16 ` AngeloGioacchino Del Regno
2021-01-20 22:40 ` Bjorn Andersson
@ 2021-02-08 17:53 ` Stephen Boyd
2 siblings, 0 replies; 6+ messages in thread
From: Stephen Boyd @ 2021-02-08 17:53 UTC (permalink / raw)
To: Michael Turquette, Taniya Das
Cc: Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk,
linux-kernel, Taniya Das
Quoting Taniya Das (2021-01-19 23:47:51)
> There are intermittent GDSC power-up failures observed for titan top
> gdsc, which requires the XO clock. Thus mark all the MM XO clocks always
> enabled from probe.
>
> Fixes: 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones")
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---
Applied to clk-next
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-02-08 17:56 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-20 7:47 [PATCH V1] clk: qcom: gcc-sc7180: Mark the MM XO clocks to be always ON Taniya Das
2021-01-20 9:16 ` AngeloGioacchino Del Regno
2021-01-21 2:46 ` Stephen Boyd
2021-01-20 22:40 ` Bjorn Andersson
2021-01-21 6:49 ` Taniya Das
2021-02-08 17:53 ` Stephen Boyd
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).