[PATCH v3 0/3] Serialize execution environment changes for MHI

[PATCH v3 0/3] Serialize execution environment changes for MHI

[Bhaumik Bhatt]

v3:
-Update commit text to accurately reflect changes and reasoning based on reviews

v2:
-Add patch to clear devices when moving execution environments

During full boot chain firmware download, the PM state worker downloads the AMSS
image after waiting for the SBL execution environment change in PBL mode itself.
Since getting rid of the firmware load worker thread, this design needs to
change and MHI host must download the AMSS image from the SBL mode of PM state
worker thread instead of blocking waits for SBL EE in PBL transition processing.

Ensure that EE changes are handled only from appropriate places and occur
one after another and handle only PBL or RDDM EE changes as critical events
directly from the interrupt handler and the status callback is given to the
controller drivers promptly.

When moving from SBL to AMSS EE, clear SBL specific client devices by calling
remove callbacks for them so they are not left opened in a different execution
environment.

Bhaumik Bhatt (3):
  bus: mhi: core: Clear devices when moving execution environments
  bus: mhi: core: Download AMSS image from appropriate function
  bus: mhi: core: Process execution environment changes serially

 drivers/bus/mhi/core/boot.c     | 44 ++++++++++++++++++++---------------------
 drivers/bus/mhi/core/internal.h |  1 +
 drivers/bus/mhi/core/main.c     | 36 +++++++++++++++++++++++----------
 drivers/bus/mhi/core/pm.c       | 10 ++++++++--
 4 files changed, 56 insertions(+), 35 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v3 1/3] bus: mhi: core: Clear devices when moving execution environments

[Bhaumik Bhatt]

When moving from SBL to mission mode execution environment, there
is no remove callback notification to MHI client drivers which
operate on SBL mode only. Client driver devices are being created
in SBL or AMSS(mission mode) and only destroyed after power down
or SYS_ERROR. If there exist any SBL-specific channels, those are
left open and client drivers are thus unaware of the new execution
environment where those channels cannot operate. Close the gap and
issue remove callbacks to SBL-specific client drivers once device
enters mission mode.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/main.c | 22 ++++++++++++++++++----
 drivers/bus/mhi/core/pm.c   |  3 +++
 2 files changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index 4e0131b..a73ca03 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -244,8 +244,10 @@ static void mhi_del_ring_element(struct mhi_controller *mhi_cntrl,
 
 int mhi_destroy_device(struct device *dev, void *data)
 {
+	struct mhi_chan *ul_chan, *dl_chan;
 	struct mhi_device *mhi_dev;
 	struct mhi_controller *mhi_cntrl;
+	enum mhi_ee_type ee = MHI_EE_MAX;
 
 	if (dev->bus != &mhi_bus_type)
 		return 0;
@@ -257,6 +259,12 @@ int mhi_destroy_device(struct device *dev, void *data)
 	if (mhi_dev->dev_type == MHI_DEVICE_CONTROLLER)
 		return 0;
 
+	ul_chan = mhi_dev->ul_chan;
+	dl_chan = mhi_dev->dl_chan;
+
+	if (data)
+		ee = *(enum mhi_ee_type *)data;
+
 	/*
 	 * For the suspend and resume case, this function will get called
 	 * without mhi_unregister_controller(). Hence, we need to drop the
@@ -264,11 +272,17 @@ int mhi_destroy_device(struct device *dev, void *data)
 	 * be sure that there will be no instances of mhi_dev left after
 	 * this.
 	 */
-	if (mhi_dev->ul_chan)
-		put_device(&mhi_dev->ul_chan->mhi_dev->dev);
+	if (ul_chan) {
+		if (ee != MHI_EE_MAX && !(ul_chan->ee_mask & BIT(ee)))
+			return 0;
+		put_device(&ul_chan->mhi_dev->dev);
+	}
 
-	if (mhi_dev->dl_chan)
-		put_device(&mhi_dev->dl_chan->mhi_dev->dev);
+	if (dl_chan) {
+		if (ee != MHI_EE_MAX && !(dl_chan->ee_mask & BIT(ee)))
+			return 0;
+		put_device(&dl_chan->mhi_dev->dev);
+	}
 
 	dev_dbg(&mhi_cntrl->mhi_dev->dev, "destroy device for chan:%s\n",
 		 mhi_dev->name);
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index 681960c..8da8806 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -377,6 +377,7 @@ static int mhi_pm_mission_mode_transition(struct mhi_controller *mhi_cntrl)
 {
 	struct mhi_event *mhi_event;
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	enum mhi_ee_type ee = MHI_EE_MAX, current_ee = mhi_cntrl->ee;
 	int i, ret;
 
 	dev_dbg(dev, "Processing Mission Mode transition\n");
@@ -395,6 +396,8 @@ static int mhi_pm_mission_mode_transition(struct mhi_controller *mhi_cntrl)
 
 	wake_up_all(&mhi_cntrl->state_event);
 
+	device_for_each_child(&mhi_cntrl->mhi_dev->dev, &current_ee,
+			      mhi_destroy_device);
 	mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_EE_MISSION_MODE);
 
 	/* Force MHI to be in M0 state before continuing */
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v3 2/3] bus: mhi: core: Download AMSS image from appropriate function

[Bhaumik Bhatt]

During full boot chain firmware download, the PM state worker
downloads the AMSS image after a blocking wait for the SBL
execution environment change when running in PBL transition
itself. Improve this design by having the host download the AMSS
image from the SBL transition of PM state worker thread when a
DEV_ST_TRANSITION_SBL is queued instead of the blocking wait.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/boot.c     | 44 ++++++++++++++++++++---------------------
 drivers/bus/mhi/core/internal.h |  1 +
 drivers/bus/mhi/core/pm.c       |  2 ++
 3 files changed, 24 insertions(+), 23 deletions(-)

diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
index c2546bf..b91c7b3 100644
--- a/drivers/bus/mhi/core/boot.c
+++ b/drivers/bus/mhi/core/boot.c
@@ -389,7 +389,6 @@ static void mhi_firmware_copy(struct mhi_controller *mhi_cntrl,
 void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
 {
 	const struct firmware *firmware = NULL;
-	struct image_info *image_info;
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
 	const char *fw_name;
 	void *buf;
@@ -500,28 +499,6 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
 		goto error_ready_state;
 	}
 
-	/* Wait for the SBL event */
-	ret = wait_event_timeout(mhi_cntrl->state_event,
-				 mhi_cntrl->ee == MHI_EE_SBL ||
-				 MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state),
-				 msecs_to_jiffies(mhi_cntrl->timeout_ms));
-
-	if (!ret || MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
-		dev_err(dev, "MHI did not enter SBL\n");
-		goto error_ready_state;
-	}
-
-	/* Start full firmware image download */
-	image_info = mhi_cntrl->fbc_image;
-	ret = mhi_fw_load_bhie(mhi_cntrl,
-			       /* Vector table is the last entry */
-			       &image_info->mhi_buf[image_info->entries - 1]);
-	if (ret) {
-		dev_err(dev, "MHI did not load image over BHIe, ret: %d\n",
-			ret);
-		goto error_fw_load;
-	}
-
 	return;
 
 error_ready_state:
@@ -532,3 +509,24 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
 	mhi_cntrl->pm_state = MHI_PM_FW_DL_ERR;
 	wake_up_all(&mhi_cntrl->state_event);
 }
+
+int mhi_download_amss_image(struct mhi_controller *mhi_cntrl)
+{
+	struct image_info *image_info = mhi_cntrl->fbc_image;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	int ret;
+
+	if (!image_info)
+		return -EIO;
+
+	ret = mhi_fw_load_bhie(mhi_cntrl,
+			       /* Vector table is the last entry */
+			       &image_info->mhi_buf[image_info->entries - 1]);
+	if (ret) {
+		dev_err(dev, "MHI did not load AMSS, ret:%d\n", ret);
+		mhi_cntrl->pm_state = MHI_PM_FW_DL_ERR;
+		wake_up_all(&mhi_cntrl->state_event);
+	}
+
+	return ret;
+}
diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
index 6f80ec3..6f37439 100644
--- a/drivers/bus/mhi/core/internal.h
+++ b/drivers/bus/mhi/core/internal.h
@@ -619,6 +619,7 @@ int mhi_pm_m3_transition(struct mhi_controller *mhi_cntrl);
 int __mhi_device_get_sync(struct mhi_controller *mhi_cntrl);
 int mhi_send_cmd(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan,
 		 enum mhi_cmd_type cmd);
+int mhi_download_amss_image(struct mhi_controller *mhi_cntrl);
 static inline bool mhi_is_active(struct mhi_controller *mhi_cntrl)
 {
 	return (mhi_cntrl->dev_state >= MHI_STATE_M0 &&
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index 8da8806..44aa7eb 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -758,6 +758,8 @@ void mhi_pm_st_worker(struct work_struct *work)
 			 * either SBL or AMSS states
 			 */
 			mhi_create_devices(mhi_cntrl);
+			if (mhi_cntrl->fbc_download)
+				mhi_download_amss_image(mhi_cntrl);
 			break;
 		case DEV_ST_TRANSITION_MISSION_MODE:
 			mhi_pm_mission_mode_transition(mhi_cntrl);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v3 3/3] bus: mhi: core: Process execution environment changes serially

[Bhaumik Bhatt]

In current design, whenever the BHI interrupt is fired, the
execution environment is updated. This can cause race conditions
and impede any ongoing power up/down processing. For example, if
a power down is in progress, MHI host updates the execution
environment to a local "disabled" state. If a BHI interrupt fires
later, the value gets replaced with one from the BHI EE register.
This impacts the controller as it does not expect multiple RDDM
execution environment change status callbacks as an example.
Another issue would be that the device can enter mission mode and
the execution environment is updated, while device creation for
SBL channels is still going on due to slower PM state worker
thread run, leading to multiple attempts at opening the same IPCR
channel.

Ensure that EE changes are handled only from appropriate places and
occur one after another and handle only PBL or RDDM EE changes as
critical events directly from the interrupt handler. This also makes
sure that we use the correct execution environment to notify the
controller driver when the device resets to one of the PBL execution
environments.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/main.c | 14 ++++++++------
 drivers/bus/mhi/core/pm.c   |  5 +++--
 2 files changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index a73ca03..69401ab 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -423,7 +423,7 @@ irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv)
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
 	enum mhi_state state = MHI_STATE_MAX;
 	enum mhi_pm_state pm_state = 0;
-	enum mhi_ee_type ee = 0;
+	enum mhi_ee_type ee = MHI_EE_MAX;
 
 	write_lock_irq(&mhi_cntrl->pm_lock);
 	if (!MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state)) {
@@ -432,8 +432,7 @@ irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv)
 	}
 
 	state = mhi_get_mhi_state(mhi_cntrl);
-	ee = mhi_cntrl->ee;
-	mhi_cntrl->ee = mhi_get_exec_env(mhi_cntrl);
+	ee = mhi_get_exec_env(mhi_cntrl);
 	dev_dbg(dev, "local ee:%s device ee:%s dev_state:%s\n",
 		TO_MHI_EXEC_STR(mhi_cntrl->ee), TO_MHI_EXEC_STR(ee),
 		TO_MHI_STATE_STR(state));
@@ -451,8 +450,9 @@ irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv)
 		if (!mhi_is_active(mhi_cntrl))
 			goto exit_intvec;
 
-		if (mhi_cntrl->ee == MHI_EE_RDDM && mhi_cntrl->ee != ee) {
+		if (ee == MHI_EE_RDDM && mhi_cntrl->ee != MHI_EE_RDDM) {
 			mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_EE_RDDM);
+			mhi_cntrl->ee = ee;
 			wake_up_all(&mhi_cntrl->state_event);
 		}
 		goto exit_intvec;
@@ -462,10 +462,12 @@ irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv)
 		wake_up_all(&mhi_cntrl->state_event);
 
 		/* For fatal errors, we let controller decide next step */
-		if (MHI_IN_PBL(ee))
+		if (MHI_IN_PBL(ee)) {
 			mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_FATAL_ERROR);
-		else
+			mhi_cntrl->ee = ee;
+		} else {
 			mhi_pm_sys_err_handler(mhi_cntrl);
+		}
 	}
 
 exit_intvec:
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index 44aa7eb..c870fa8 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -384,14 +384,15 @@ static int mhi_pm_mission_mode_transition(struct mhi_controller *mhi_cntrl)
 
 	write_lock_irq(&mhi_cntrl->pm_lock);
 	if (MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state))
-		mhi_cntrl->ee = mhi_get_exec_env(mhi_cntrl);
+		ee = mhi_get_exec_env(mhi_cntrl);
 
-	if (!MHI_IN_MISSION_MODE(mhi_cntrl->ee)) {
+	if (!MHI_IN_MISSION_MODE(ee)) {
 		mhi_cntrl->pm_state = MHI_PM_LD_ERR_FATAL_DETECT;
 		write_unlock_irq(&mhi_cntrl->pm_lock);
 		wake_up_all(&mhi_cntrl->state_event);
 		return -EIO;
 	}
+	mhi_cntrl->ee = ee;
 	write_unlock_irq(&mhi_cntrl->pm_lock);
 
 	wake_up_all(&mhi_cntrl->state_event);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project